### ControllerApplication usage example

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/application.md

Example of creating and using the ControllerApplication: connect, start network, permit joins, add an endpoint, and disconnect.

```python
from zigpy_znp.zigbee.application import ControllerApplication

app = ControllerApplication({"device": {"path": "/dev/ttyUSB0"}})
await app.connect()
await app.start_network()
await app.permit(time_s=60)          # permit joins for a minute
await app.add_endpoint(simple_desc)  # register an endpoint
await app.disconnect()
```

--------------------------------

### Install zigpy-znp Python module

Source: https://github.com/zigpy/zigpy-znp/blob/dev/README.md

Commands to create a virtual environment and install zigpy-znp from Git or PyPI. The first command creates a virtual environment if you don't already have one. The second installs the latest commit from Git, and the third installs the latest stable from PyPI.

```console
$ virtualenv -p python3.8 venv                                # if you don't already have one
$ source venv/bin/activate
(venv) $ pip install git+https://github.com/zigpy/zigpy-znp/  # latest commit from Git
(venv) $ pip install zigpy-znp                                # or, latest stable from PyPI
```

--------------------------------

### Example: reading devices and frame counter

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/security.md

Example usage of `security.read_devices` and `security.read_nwk_frame_counter` with an `ext_pan_id` from the network info.

```python
from zigpy_znp.znp import security

stored = await security.read_devices(znp, tclk_seed=tclk_seed)
frames = await security.read_nwk_frame_counter(
    znp, ext_pan_id=znp.network_info.extended_pan_id
)
```

--------------------------------

### Install zigpy-znp from PyPI

Source: https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md

Install the latest stable release of zigpy-znp from PyPI.

```console
$ pip install zigpy-znp
```

--------------------------------

### Connect and disconnect example

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/api.md

Example usage of connect() and disconnect() with a config schema. Prints the Z-Stack version and capabilities.

```python
config = conf.CONFIG_SCHEMA({"device": {"path": "/dev/ttyUSB0"}})
znp = ZNP(config)
await znp.connect()
print(f"Z-Stack {znp.version}, caps={znp.capabilities:#x}")
await znp.disconnect()
```

--------------------------------

### Listener management examples

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/utils.md

Examples showing how to capture incoming messages, perform one-shot waits with error handling, and auto-clean listeners.

```python
from zigpy_znp import utils

# Capture all incoming AF messages
listener = znp.callback_for_response(
    c.AF.IncomingMsg.Callback(partial=True), on_msg
)

# One-shot wait with error-path listener removal
future, listener = znp.wait_for_responses(
    [c.ZDO.StateChangeInd.Callback(partial=True)], context=True
)
try:
    rsp = await asyncio.wait_for(future, timeout=10)
except asyncio.TimeoutError:
    znp.remove_listener(listener)

# One-shot wait, auto-cleaned on completion
future = znp.wait_for_responses([c.SYS.Ping.Rsp(partial=True)])
```

--------------------------------

### UART connect example

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/uart.md

Example usage of the uart.connect() entry point, showing how to connect and send a ping request, set DTR/RTS, and wait for connection.

```python
from zigpy_znp import uart

# `connect()` is the public entry point (used by ZNP.connect()):
protocol = await uart.connect(config, api=znp)
protocol.send(c.SYS.Ping.Req().to_frame())
await protocol.set_dtr_rts(dtr=False, rts=True)
await protocol.wait_until_connected()

```

--------------------------------

### Install zigpy-znp from dev branch tarball

Source: https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md

Install the latest dev branch as a tarball, for systems without git.

```console
$ pip install https://github.com/zigpy/zigpy-znp/archive/dev.tar.gz
```

--------------------------------

### callback_for_response example

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/api.md

Example usage of callback_for_response with a ZDO.LeaveInd.Callback and a callback that prints the device IEEE address.

```python
def on_leave(msg: c.ZDO.LeaveInd.Callback) -> None:
    print(f"Device left: {msg.IEEE}")

znp.callback_for_response(c.ZDO.LeaveInd.Callback(partial=True), on_leave)
```

--------------------------------

### Install zigpy-znp from dev branch via git

Source: https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md

Install the latest commit from the dev branch using git.

```console
$ pip install git+https://github.com/zigpy/zigpy-znp.git@dev
```

--------------------------------

### MAC_START_CNF

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/ti-15.4-stack-cop-interface-guide.pdf

Confirmation of a start request. This command is sent from the stack to the host to indicate the result of starting a PAN.

```APIDOC
## MAC_START_CNF

### Description
Confirmation of a start request. This command is sent from the stack to the host to indicate the result of starting a PAN.

### Command Type
Confirmation (CNF)

### Parameters
- **Status** (uint8) - The status of the start request.

### Response
No response expected.
```

--------------------------------

### ZNP Load Network Info Usage Example

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/api.md

Example of connecting to the ZNP and loading network information, handling the NetworkNotFormed exception.

```python
znp = ZNP(config)
await znp.connect()
try:
    await znp.load_network_info(load_devices=True)
except NetworkNotFormed:
    print("No network formed yet")
```

--------------------------------

### SYS_OSAL_START_TIMER

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack Monitor and Test API.pdf

Starts an OSAL timer.

```APIDOC
## SYS_OSAL_START_TIMER

### Description
Starts an OSAL timer.

### Method
Command

### Endpoint
SYS_OSAL_START_TIMER

### Parameters
None

### Request Example
None

### Response
None
```

--------------------------------

### Example CLI invocations for network_backup, network_restore, energy_scan, nvram_read

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/tools.md

Shows how to run the tools from the command line, passing the device path and optional output file. The commands are executed with `python -m zigpy_znp.tools.<name>`.

```console
$ python -m zigpy_znp.tools.network_backup /dev/ttyUSB0 backup.json
$ python -m zigpy_znp.tools.network_restore /dev/ttyUSB0 backup.json
$ python -m zigpy_znp.tools.energy_scan /dev/ttyUSB0
$ python -m zigpy_znp.tools.nvram_read /dev/ttyUSB0 nvram.json
```

--------------------------------

### Command construction and matching example

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/command-base.md

Demonstrates constructing a request command and creating a partial command for response matching.

```python
import zigpy_znp.types as t
import zigpy_znp.commands as c

# Construct a full request command
req = c.SYS.Ping.Req()
frame = req.to_frame()

# Partial command used for response matching
expectation = c.SYS.OSALNVReadExt.Rsp(
    partial=True, Status=t.Status.SUCCESS
)
```

--------------------------------

### Install Python 3.7+ on Ubuntu 20.04

Source: https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md

Install Python 3 and virtualenv on Ubuntu 20.04. Ensure the installed Python version is 3.7 or above.

```console
$ sudo apt install python3 python3-virtualenv  # ensure this is Python 3.7 or above
```

--------------------------------

### ZDO_STARTUP_FROM_APP

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack Monitor and Test API.pdf

This command starts the device in the network. It is sent as an SREQ and returns a status in the SRSP.

```APIDOC
## ZDO_STARTUP_FROM_APP

### Description
This command starts the device in the network.

### Method
SREQ (Request) / SRSP (Response)

### Endpoint
Cmd0 = 0x25, Cmd1 = 0x40 (SREQ) / Cmd0 = 0x65, Cmd1 = 0x40 (SRSP)

### Parameters
#### Request Body (SREQ)
- **StartDelay** (2 bytes) - Required - Specifies the time delay before the device starts.

#### Response (SRSP)
- **Status** (1 byte) - Status values: 0x00 – Restored network state, 0x01 – New network state, 0x02 – Leave and not Started.

### Request Example
```
Length = 0x01, Cmd0 = 0x25, Cmd1 = 0x40, StartDelay
```

### Response Example
```
Length = 0x01, Cmd0 = 0x65, Cmd1 = 0x40, Status
```

```

--------------------------------

### SEND GET GROUP MEMBERSHIP RESPONSE (GROUP)

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Get Group Membership Response command in reply to a Get Group Membership command.

```APIDOC
## SEND GET GROUP MEMBERSHIP RESPONSE (GROUP)

### Description
Sends a Get Group Membership Response command in reply to a Get Group Membership command.

### Method
N/A (SDK function)

### Endpoint
N/A

### Parameters
No parameters documented.

### Request Example
N/A

### Response
N/A
```

--------------------------------

### start_network()

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/errors.md

Starts the network. Raises FormationFailure on commissioning timeout or BDB refusal, and InvalidCommandResponse on unexpected StartupState.

```APIDOC
## start_network()

### Description
Starts the network. Raises FormationFailure on commissioning timeout or BDB refusal, and InvalidCommandResponse on unexpected StartupState.

### Exceptions
- **zigpy.exceptions.FormationFailure** - Raised on commissioning timeout or BDB refused formation; also raised on `NetworkNotFormed`.
- **InvalidCommandResponse** - Raised when Z-Stack 1.2 `StartupFromApp` returned an unexpected `StartupState`.
```

--------------------------------

### capture_responses example

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/api.md

Example usage of capture_responses with CatchAllResponse and SYS.Ping.Req.

```python
async with znp.capture_responses([CatchAllResponse()]) as responses:
    await znp.request(c.SYS.Ping.Req())
    first = await responses.get()
```

--------------------------------

### ZNP Start Network

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/api.md

Forms or starts the network based on the Z-Stack version.

```python
async def start_network(self) -> None
```

--------------------------------

### ControllerApplication.start_network

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/application.md

Executes the boot sequence to start the network on the radio, including loading network info, resetting the radio, applying configuration, registering endpoints, and setting up the coordinator device.

```APIDOC
## [async] ControllerApplication.start_network(read_only=False)

### Description
Boot sequence executed once per startup: load network info (if not yet loaded), run NVRAM migration and write stack settings (unless read_only=True), reset the radio, apply tx_power and led_mode config, start the network on the radio, register endpoints, subscribe to ZDO callbacks via ZDO.MsgCallbackRegister(ClusterId=0xFFFF), and set up the ZNPCoordinator device. It then sizes _concurrent_requests_semaphore: 16 when the radio uses aligned structs (Z-Stack 3.30), 4 otherwise, unless overridden by max_concurrent_requests (top-level zigpy config key).

**Throws:** RuntimeError if the deprecated znp_config:max_concurrent_requests key is set. Logs a warning if the Zigbee2MQTT default network key is in use.

### Method
async

### Endpoint
ControllerApplication.start_network(read_only=False)

### Parameters
#### Query Parameters
- **read_only** (bool) - Optional - If True, skip NVRAM migration and writing stack settings.

### Request Example
None

### Response
#### Success Response
None

#### Response Example
None
```

--------------------------------

### SEND GET ALARM (ALARM)

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Get Alarm command in the Alarm cluster.

```APIDOC
## SEND GET ALARM (ALARM)

### Description
Sends a Get Alarm command in the Alarm cluster.

### Method
Function Call

### Endpoint
Not specified

### Parameters
Not specified

### Request Example
Not specified

### Response
Not specified

```

--------------------------------

### bdbTL_Send_NwkStartReq

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Network Start Request. This function is used to start a new network.

```APIDOC
## bdbTL_Send_NwkStartReq

### Description
Sends a Network Start Request.

### Prototype
```c
ZStatus_t bdbTL_Send_NwkStartReq(uint8 srcEP, afAddrType_t *dstAddr, bdbTLNwkStartReq_t *pRsp, uint8 seqNum);
```

### Parameters
- **srcEP** (uint8) - The source endpoint.
- **dstAddr** (afAddrType_t *) - The destination address.
- **pRsp** (bdbTLNwkStartReq_t *) - Pointer to request parameters.
- **seqNum** (uint8) - The identification number for the transaction.

### Return
- **ZStatus_t** - enum found in ZComDef.h.
```

--------------------------------

### Example YAML configuration for zigpy-znp

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/configuration.md

Shows a complete ZHA zigpy_config with device path, baudrate, and znp_config options like tx_power, led_mode, skip_bootloader, and timeouts. Use this as a template for configuring a ZNP coordinator.

```yaml
zha:
  zigpy_config:
    device:
      path: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC__0X00124B001D4EE36F-if00
      baudrate: 115200
    znp_config:
      tx_power: 9
      led_mode: off
      skip_bootloader: true
      sync_request_timeout: 15
      async_response_timeout: 30
      connect_rts_pin_states: [false, true, false]
      connect_dtr_pin_states: [false, false, false]
```

--------------------------------

### bdbTL_Send_NwkStartRsp

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Network Start Response. This function is used to respond to a network start request.

```APIDOC
## bdbTL_Send_NwkStartRsp

### Description
Sends a Network Start Response.

### Prototype
ZStatus_t bdbTL_Send_NwkStartRsp (uint8 srcEP, afAddrType_t *dstAddr, bdbTLNwkStartRsp_t *pRsp, uint8 seqNum);

### Parameters
- **srcEP** (uint8) - The source endpoint.
- **dstAddr** (afAddrType_t *) - The destination address.
- **pRsp** (bdbTLNwkStartRsp_t *) - Pointer to response parameters.
- **seqNum** (uint8) - The identification number for the transaction.

### Return
ZStatus_t - enum found in ZComDef.h.
```

--------------------------------

### ZNP.__init__

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/api.md

Constructor for the ZNP class. Initializes the ZNP client with a configuration dictionary.

```APIDOC
## ZNP.__init__

### Description
Initializes a new ZNP instance with the given configuration.

### Parameters
- **config** (conf.ConfigType) - Required - Configuration dictionary (dict[str, typing.Any]).

### Example
```python
znp = ZNP(config)
```
```

--------------------------------

### Install Python 3 and virtualenv on macOS

Source: https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md

Install Python 3 and virtualenv using Homebrew on macOS.

```console
$ brew install python@3
```

```console
$ brew install virtualenv
```

--------------------------------

### UTIL_ZCL_KEY_EST_INIT_EST

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack Monitor and Test API.pdf

Initializes key establishment.

```APIDOC
## UTIL_ZCL_KEY_EST_INIT_EST

### Description
Initializes key establishment.

### Method
Command

### Endpoint
UTIL_ZCL_KEY_EST_INIT_EST

### Parameters
- **taskId** (uint8) - Required - Task ID
- **seqNum** (uint8) - Required - Sequence number
- **addr** (uint16) - Required - Address
- **endpoint** (uint8) - Required - Endpoint

### Response
- **status** (uint8) - Status of the operation.
```

--------------------------------

### zclGeneral_SendGroupGetMembershipResponse

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Get Group Membership Response command to respond to a Get Group Membership request.

```APIDOC
## zclGeneral_SendGroupGetMembershipResponse

### Description
Sends a Get Group Membership Response command to respond to a Get Group Membership request.

### Prototype
```c
ZStatus_t zclGeneral_SendGroupGetMembershipResponse( uint8 srcEP, afAddrType_t *dstAddr, uint8 capacity, uint8 grpCnt, uint16 *grpList, uint8 disableDefaultRsp, uint8 seqNum );
```

### Parameters
- **srcEP** (uint8) - The source endpoint.
- **dstAddr** (afAddrType_t*) - The destination address.
- **capacity** (uint8) - The capacity of the group table.
- **grpCnt** (uint8) - The number of groups in the list.
- **grpList** (uint16*) - The list of group IDs.
- **disableDefaultRsp** (uint8) - Disable Default Response command.
- **seqNum** (uint8) - The identification number for the transaction.

### Return
- **ZStatus_t** - enum found in ZComDef.h.
```

--------------------------------

### SEND GET ALARM RESPONSE (ALARM)

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Get Alarm Response command in the Alarm cluster.

```APIDOC
## SEND GET ALARM RESPONSE (ALARM)

### Description
Sends a Get Alarm Response command in the Alarm cluster.

### Method
Function Call

### Endpoint
Not specified

### Parameters
Not specified

### Request Example
Not specified

### Response
Not specified

```

--------------------------------

### ZNP.start_network

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/api.md

Forms or starts the network. For Z-Stack 3+ sends BDBStartCommissioning with NwkFormation; for Z-Stack 1.2 sends ZDO.StartupFromApp.

```APIDOC
## ZNP.start_network

### Description
Forms or starts the network. For Z-Stack 3+, sends AppConfig.BDBStartCommissioning with NwkFormation and waits for BDBCommissioningNotification. For Z-Stack 1.2, sends ZDO.StartupFromApp(StartDelay=100) and requires StartupState.NewNetworkState or RestoredNetworkState. Then waits for the StartedAsCoordinator callback and polls until the NIB reports a valid channel/PAN.

### Throws
- **zigpy.exceptions.FormationFailure** - On timeout.
- **InvalidCommandResponse** - On unexpected Z-Stack 1.2 startup state.

### Example
```python
await znp.start_network()
```
```

--------------------------------

### UTIL_ZCL_KEY_EST_INIT_EST

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack Monitor and Test API.pdf

This command is a proxy call to zclGeneral_KeyEstablish_InitiateKeyEstablishment(). It initiates key establishment with a partner device.

```APIDOC
## UTIL_ZCL_KEY_EST_INIT_EST

### Description
This command is a proxy call to zclGeneral_KeyEstablish_InitiateKeyEstablishment().

### Usage

#### SREQ

| Field | Length (byte) | Description |
|---|---|---|
| TaskId | 1 | The OSAL Task Id making the request. |
| SeqNum | 1 | The sequence number of the request. |
| EndPoint | 1 | The endpoint on the partner. |
| AddrMode | 1 | The address mode to the partner according to the afAddrMode_t enumeration in AF.h. |
| Addr | 8 | If AddrMode is afAddr64Bit, the 8-byte extended address of the partner; otherwise the 2-byte network address of the partner. |

#### SRSP

| Field | Length (byte) | Description |
|---|---|---|
| Status | 1 | The ZStatus_t returned by the proxy call to zclGeneral_KeyEstablish_InitiateKeyEstablishment(). |
```

--------------------------------

### Programmatic use of ControllerApplication

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/configuration.md

Shows how to instantiate ControllerApplication with a minimal config dict and connect. The config is validated by app.SCHEMA on __init__.

```python
config = {"device": {"path": "/dev/ttyUSB0"}}
app = ControllerApplication(config)   # validated by app.SCHEMA on __init__
await app.connect()
```

--------------------------------

### Typical ZNP command usage

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/commands-sys-af.md

Demonstrates pinging the device, performing a soft reset with a callback, and retrieving version information.

```python
import zigpy_znp.commands as c
import zigpy_znp.types as t

# Ping + capabilities; the basis of ZNP.connect()
rsp = await znp.request(c.SYS.Ping.Req())
assert rsp.Capabilities & t.MTCapabilities.APP_CNF

# Soft reset, waiting for the reset indication
await znp.request_callback_rsp(
    request=c.SYS.ResetReq.Req(Type=t.ResetType.Soft),
    callback=c.SYS.ResetInd.Callback(partial=True),
)

# Version response, with optional trailing parameters
version = await znp.request(c.SYS.Version.Req())
print(version.CodeRevision, version.BootloaderBuildType)
```

--------------------------------

### bdbTL_Send_GetGrpIDsRsp

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Get Group Identifiers Response. This function is used to respond to a get group identifiers request.

```APIDOC
## bdbTL_Send_GetGrpIDsRsp

### Description
Sends a Get Group Identifiers Response.

### Prototype
ZStatus_t bdbTL_Send_GetGrpIDsRsp (uint8 srcEP, afAddrType_t *dstAddr, bdbTLGetGrpIDsRsp_t *pRsp, uint8 disableDefaultRsp, uint8 seqNum);

### Parameters
- **srcEP** (uint8) - The source endpoint.
- **dstAddr** (afAddrType_t *) - The destination address.
- **pRsp** (bdbTLGetGrpIDsRsp_t *) - Pointer to response parameters.
- **disableDefaultRsp** (uint8) - Whether to disable the Default Response command.
- **seqNum** (uint8) - The identification number for the transaction.

### Return
ZStatus_t - enum found in ZComDef.h.
```

--------------------------------

### MAC_INIT

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack Monitor and Test API.pdf

Initializes the MAC. This command has no request parameters and returns a status indicating success or failure.

```APIDOC
## MAC_INIT

### Description
Initializes the MAC.

### Usage
SREQ

### Request Format
|Byte: 1|1|1|
|---|---|---|
|Length = 0x00|Cmd0 = 0x22|Cmd1 = 0x02|

### Response Format (SRSP)
|Byte: 1|1|1|1|
|---|---|---|---|
|Length = 0x01|Cmd0 = 0x62|Cmd1 = 0x02|Status|

### Response Parameters
- **Status** (byte) - Status is either Success (0) or Failure (1).
```

--------------------------------

### ControllerApplication.connect

Source: https://github.com/zigpy/zigpy-znp/blob/dev/_autodocs/api-reference/application.md

Connects the application to the ZNP radio by creating a ZNP instance, connecting it, attaching the application, and binding internal callbacks.

```APIDOC
## [async] ControllerApplication.connect()

### Description
Connects the application to the ZNP radio. Asserts that _znp is None, creates a ZNP instance with the current config, connects it, attaches the application, and binds internal callbacks.

### Method
async

### Endpoint
ControllerApplication.connect()

### Parameters
None

### Request Example
None

### Response
#### Success Response
None

#### Response Example
None
```

--------------------------------

### bdbTL_NwkStartReqCB_t

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Callback to process an incoming Network Start Request command.

```APIDOC
## Callback: bdbTL_NwkStartReqCB_t

### Description
This callback is called to process an incoming Network Start Request command.

### Prototype
```c
typedef ZStatus_t (*bdbTL_NwkStartReqCB_t)( afAddrType_t *srcAddr, bdbTLNwkStartReq_t *pReq, uint8 seqNum );
```

### Parameters
- **srcAddr** (afAddrType_t *) - The destination address.
- **pReq** (bdbTLNwkStartReq_t *) - Pointer to request parameters.
- **seqNum** (uint8) - The identification number for the transaction.

### Return
- **ZStatus_t** - enum found in ZComDef.h.
```

--------------------------------

### bdbTL_Send_GetEPListRsp

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Get Endpoint List Response command. This function is used to respond to a Get Endpoint List Request.

```APIDOC
## bdbTL_Send_GetEPListRsp

### Description
Sends a Get Endpoint List Response command.

### Prototype
ZStatus_t bdbTL_Send_GetEPListRsp (uint8 srcEP, afAddrType_t *dstAddr, bdbTLGetEPListRsp_t *pRsp, uint8 disableDefaultRsp, uint8 seqNum);

### Parameters
- **srcEP** (uint8) - The source endpoint.
- **dstAddr** (afAddrType_t *) - The destination address.
- **pRsp** (bdbTLGetEPListRsp_t *) - Pointer to response parameters.
- **disableDefaultRsp** (uint8) - Whether to disable the Default Response command.
- **seqNum** (uint8) - The identification number for the transaction.

### Return
ZStatus_t - enum found in ZComDef.h.
```

--------------------------------

### SEND GET LOCATION DATA (RSSI LOCATION)

Source: https://github.com/zigpy/zigpy-znp/blob/dev/docs/Z-Stack ZCL API.pdf

Sends a Get Location Data command in the RSSI Location cluster.

```APIDOC
## SEND GET LOCATION DATA (RSSI LOCATION)

### Description
Sends a Get Location Data command in the RSSI Location cluster.

### Method
Function Call

### Endpoint
Not specified

### Parameters
Not specified

### Request Example
Not specified

### Response
Not specified

```