### Install and Run MeshCommander via NPM

Source: https://github.com/ylianst/meshcommander/blob/master/readme.md

Use these commands to install the package via Node Package Manager and start the local web server on port 3000.

```bash
	mkdir meshcommander
	cd meshcommander
	npm install meshcommander
	node node_modules\meshcommander
```

--------------------------------

### Start Script Block

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Initializes the script execution process.

```MeshCommander Script
print "Script Started"
```

--------------------------------

### Get AMT Boot Settings

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Retrieves the current AMT boot settings and prints them to the console.

```MeshCommander Script
split ws_general_query "*AMT_BootSettingData"
wsbatchenum "wsman_answer" ws_general_query
jump :error-%%%~%%% wsman_result "!=" 200
set bootoptions wsman_answer.AMT_BootSettingData.response
print bootoptions
set AMT_BootSettingData
jump :error-%%%~%%% wsman_result "!=" 200
jump :end-%%%~%%%
:error-%%%~%%%
print "WSMAN call failed: {wsman_result_str}"
:end-%%%~%%%
set ws_general_query
set wsman_answer
set wsman_result
set wsman_result_str
#set bootoptions

```

--------------------------------

### Set AMT Boot Settings

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Configures next boot parameters such as BIOS setup and Serial-over-LAN status.

```MeshCommander Script
split ws_general_query "*AMT_BootSettingData"
wsbatchenum "wsman_answer" ws_general_query
jump :error-%%%~%%% wsman_result "!=" 200
set bootoptions wsman_answer.AMT_BootSettingData.response
set bootoptions.BIOSSetup "%%%bootBiosSetup%%%"
set bootoptions.UseSOL "%%%bootSerialOverLan%%%"
wsput "AMT_BootSettingData" bootoptions
set AMT_BootSettingData
jump :error-%%%~%%% wsman_result "!=" 200
jump :end-%%%~%%%
:error-%%%~%%%
print "WSMAN call failed: {wsman_result_str}"
:end-%%%~%%%
set ws_general_query
set wsman_answer
set wsman_result
set wsman_result_str
#set bootoptions


```

--------------------------------

### Start MeshCommander using MeshCMD

Source: https://github.com/ylianst/meshcommander/blob/master/readme.md

Execute this command to launch the MeshCommander web server when using the MeshCMD command-line tool.

```bash
	meshcmd meshcommander
```

--------------------------------

### Get Intel AMT Provisioning Mode

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Retrieves the current Intel AMT provisioning mode and prints it to the console.

```scriptblock
jsonparse provModeHmap "%7B%221%22:%22Admin%20Control%20Mode%20(ACM)%22,%222%22:%22Reserved1%22,%223%22:%22Client%20Control%20Mode%20(CCM)%22,%224%22:%22Reserved2%22%7D"
split ws_general_query "*AMT_SetupAndConfigurationService"
wsbatchenum "wsman_answer" ws_general_query
jump :error-%%%~%%% wsman_result "!=" 200
set key wsman_answer.AMT_SetupAndConfigurationService.response.ProvisioningMode
set AmtProvMode provModeHmap.{key}
print "Intel AMT Provisioning Mode: {AmtProvMode}"
jump :end-%%%~%%%
:error-%%%~%%%
print "WSMAN call failed: {wsman_result_str}"
:end-%%%~%%%
set ws_general_query
set wsman_answer
set wsman_result
set wsman_result_str
set provModeHmap
set key
```

--------------------------------

### Get Provisioning State

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Retrieves the current Provisioning State of Intel AMT, prints it to the console, and stores it in the AmtProvState variable.

```MeshCommander Script
jsonparse provStateHmap "%7B%220%22:%22Pre%22,%221%22:%22In%22,%222%22:%22Post%22%7D"
split ws_general_query "*AMT_SetupAndConfigurationService"
wsbatchenum "wsman_answer" ws_general_query
jump :error-%%%~%%% wsman_result "!=" 200
set key wsman_answer.AMT_SetupAndConfigurationService.response.ProvisioningState
set AmtProvState provStateHmap.{key}
add AmtProvState AmtProvState "-Provisioning"
print "Intel AMT Provisioning State: {AmtProvState}"
jump :end-%%%~%%%
:error-%%%~%%%
print "WSMAN call failed: {wsman_result_str}"
:end-%%%~%%%
set ws_general_query
set wsman_answer
set wsman_result
set wsman_result_str
set provStateHmap
set key
```

--------------------------------

### Get Intel AMT Version

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Retrieves the Intel AMT release version, prints it to the console, and stores it in the AmtCoreVersion variable.

```MeshCommander Script
split ws_general_query "CIM_SoftwareIdentity"
wsbatchenum "wsman_answer" ws_general_query
set i 0
set arr wsman_answer.CIM_SoftwareIdentity.responses
length arr_len arr
:loop-%%%~%%%
set curInstanceId arr.{i}.InstanceID
jump :AmtCoreVersionFound-%%%~%%% curInstanceId "=" "AMT FW Core Version"
add i i 1
jump :loop-%%%~%%% i "<" arr_len
print "Error: Intel AMT version was not found"
jump :end-%%%~%%%
:AmtCoreVersionFound-%%%~%%%
set AmtCoreVersion arr.{i}.VersionString
print "Intel AMT version: {AmtCoreVersion}"
:end-%%%~%%%
set arr
set arr_len
set curInstanceId
set i
set ws_general_query
set wsman_answer
set wsman_result
```

--------------------------------

### Get Platform Type

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Retrieves the platform type of the target, prints it to the console, and stores it in the PlatformType variable.

```MeshCommander Script
jsonparse sysTypeHmap "%7B%2232%22:%22Desktop%22,%2233%22:%22Notebook%22%7D"
split ws_general_query "CIM_ComputerSystem"
wsbatchenum "wsman_answer" ws_general_query
set i -1
jump :error-%%%~%%% wsman_result "!=" 200
getitem i wsman_answer.CIM_ComputerSystem.responses "ElementName" "Managed System"
jump :amtCoreError-%%%~%%% i "<" 0
set i wsman_answer.CIM_ComputerSystem.responses.{i}.Dedicated
set PlatformType sysTypeHmap.{i}
print "Platform Type: {PlatformType}"
jump :end-%%%~%%%
:amtCoreError-%%%~%%%
print "Error: couldn't find CIM_ComputerSystem.ElementName = %22Managed System%22"
jump :end-%%%~%%%
:error-%%%~%%%
print "WSMAN call failed: {wsman_result_str}"
:end-%%%~%%%
set i
set ws_general_query
set wsman_answer
set wsman_result
set wsman_result_str
set sysTypeHmap
```

--------------------------------

### Get Intel AMT UUID

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Retrieves the Intel AMT UUID, prints it to the console, and stores it in the AmtUuid variable.

```scriptblock
split ws_general_query "CIM_ComputerSystem"
wsbatchenum "wsman_answer" ws_general_query
set i -1
jump :error-%%%~%%% wsman_result "!=" 200
getitem i wsman_answer.CIM_ComputerSystem.responses "ElementName" "Managed System"
jump :amtCoreError-%%%~%%% i "<" 0
set AmtUuid wsman_answer.CIM_ComputerSystem.responses.{i}.OtherIdentifyingInfo
print "Intel AMT UUID: {AmtUuid}"
jump :end-%%%~%%%
:amtCoreError-%%%~%%%
print "Error: couldn't find CIM_ComputerSystem.ElementName = %22Managed System%22"
jump :end-%%%~%%%
:error-%%%~%%%
print "WSMAN call failed: {wsman_result_str}"
:end-%%%~%%%
set i
set ws_general_query
set wsman_answer
set wsman_result
```

--------------------------------

### Set Hostname and Domain

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Updates the hostname and domain name settings for Intel AMT.

```scriptblock
split ws_general_query "*AMT_GeneralSettings" ,
wsbatchenum "wsman_answer" ws_general_query
jump :error-%%%~%%% wsman_result "!=" 200
set wsman_answer.AMT_GeneralSettings.response.HostName "%%%hostname%%%"
set wsman_answer.AMT_GeneralSettings.response.DomainName "%%%domainname%%%"
wsput "AMT_GeneralSettings" wsman_answer.AMT_GeneralSettings.response
jump :error-%%%~%%% wsman_result "!=" 200
set PullSystemStatus "1"
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%

```

--------------------------------

### Jump to Label

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Redirects script execution to a specified label.

```text
jump :%%%label%%%
```

--------------------------------

### Retrieve Intel AMT FQDN

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Fetches the host and domain name from AMT_GeneralSettings to construct and store the full FQDN.

```MeshCommander Script
split ws_general_query "*AMT_GeneralSettings"
wsbatchenum "wsman_answer" ws_general_query
jump :error-%%%~%%% wsman_result "!=" 200
set AmtFqdn wsman_answer.AMT_GeneralSettings.response.HostName
add AmtFqdn AmtFqdn "."
add AmtFqdn AmtFqdn wsman_answer.AMT_GeneralSettings.response.DomainName
print "Intel AMT FQDN: {AmtFqdn}"
jump :end-%%%~%%%
:error-%%%~%%%
print "WSMAN call failed: {wsman_result_str}"
:end-%%%~%%%
set ws_general_query
set wsman_answer
set wsman_result
```

--------------------------------

### Configure Intel AMT Environment Detection

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Validates and sets environment detection strings and IPv6 local prefixes for Intel AMT. Requires input variables for detection strings and IPv6 prefixes, with a maximum limit of 5 entries each.

```MeshCommander Script
# *** Validate user input ***
print "Parsing block parameters"
jump :EMPTY_DETECTIONSTR-%%%~%%% "%%%DetectionStrings%%%" "=" ""
split arrDetectionStrings "%%%DetectionStrings%%%" ","
split arrDetectionIPv6LocalPrefixes "%%%DetectionIPv6LocalPrefixes%%%" ","
print "Setting Environment Detection"
split ws_general_query "*AMT_EnvironmentDetectionSettingData" ","
wsbatchenum "wsman_answer" ws_general_query
set envDetectionInstance wsman_answer.AMT_EnvironmentDetectionSettingData.response
jump :DetectionStringsDefined-%%%~%%% envDetectionInstance.DetectionStrings "!="
set envDetectionInstance.DetectionStrings arrDetectionStrings
jump :SET_IPV6_PREFIX-%%%~%%%
:DetectionStringsDefined-%%%~%%%
add arrDetectionStrings "," arrDetectionStrings
add envDetectionInstance.DetectionStrings envDetectionInstance.DetectionStrings arrDetectionStrings
maketoarray envDetectionInstance.DetectionStrings envDetectionInstance.DetectionStrings
length arrDetectionStringsLen envDetectionInstance.DetectionStrings
jump :INVALID_LEN_DetectionStrings-%%%~%%% arrDetectionStringsLen ">" "5"
:SET_IPV6_PREFIX-%%%~%%%
jump :IPv6StringsDefined-%%%~%%% envDetectionInstance.DetectionIPv6LocalPrefixes "!="
jump :EMPTY_IPV6PRFX "%%%DetectionIPv6LocalPrefixes%%%" "=" "" 
set envDetectionInstance.DetectionIPv6LocalPrefixes arrDetectionIPv6LocalPrefixes
jump :CALL_WSPUT-%%%~%%%
:IPv6StringsDefined-%%%~%%%
add arrDetectionIPv6LocalPrefixes "," arrDetectionIPv6LocalPrefixes
add envDetectionInstance.DetectionIPv6LocalPrefixes envDetectionInstance.DetectionIPv6LocalPrefixes arrDetectionIPv6LocalPrefixes
maketoarray envDetectionInstance.DetectionIPv6LocalPrefixes envDetectionInstance.DetectionIPv6LocalPrefixes
:EMPTY_IPV6PRFX
length arrDetectionIPv6LocalPrefixesLen envDetectionInstance.DetectionIPv6LocalPrefixes
jump :INVALID_LEN_DetectionIPv6LocalPrefixes-%%%~%%% arrDetectionIPv6LocalPrefixesLen ">" "5"
:CALL_WSPUT-%%%~%%%
wsput "AMT_EnvironmentDetectionSettingData" envDetectionInstance
jump :error-%%%~%%% wsman_result "!=" 200
print "Environment Detection set successfully"
jump :end-%%%~%%%
:error-%%%~%%%
print "ERROR: WSMAN call failed: {wsman_result_str}"
jump :end-%%%~%%%
:INVALID_LEN_DetectionStrings-%%%~%%%
print "ERROR: detection strings count must be at most 5"
jump :end-%%%~%%%
:INVALID_LEN_DetectionIPv6LocalPrefixes-%%%~%%%
print "ERROR: IPv6 prefixes count must be at most 5"
jump :end-%%%~%%%
:EMPTY_DETECTIONSTR-%%%~%%%
print "ERROR: %22Detection Strings%22 field cannot be empty, aborting operation..."
:end-%%%~%%%
 set PullRemoteAccess "1"
set AMT_EnvironmentDetectionSettingData
set arrDetectionIPv6LocalPrefixes
set arrDetectionStrings
set envDetectionInstance
set ws_general_query
set wsman_answer 
set wsman_result
```

--------------------------------

### Print to Console

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Outputs a string to the console. Use URL escaping for special characters and {x} to reference variable x.

```text
print "%%%printstring%%%"
```

--------------------------------

### Print User Consent Mode

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Displays the current Intel AMT user consent mode configuration.

```scriptblock
jsonparse OptInStateEnum "%7B%220%22:%22Not Required%22,%221%22:%22Required for KVM only%22,%224294967295%22:%22Always Required%22%7D"
split ws_optIn_query "*IPS_OptInService" ,
wsbatchenum "wsman_answer" ws_optIn_query
jump :error-%%%~%%% wsman_result "!=" 200
print "User Consent mode: {OptInStateEnum.{wsman_answer.IPS_OptInService.response.OptInRequired}}"
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%

```

--------------------------------

### Add Kerberos User Account

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Script to add a new Kerberos user account to Intel AMT using a SID byte array.

```MeshCommander Script
# Set kerberos sid value as a byte array string
set KerberosUserString "%%%sid%%%"
GetSidByteArray x KerberosUserString
btoa KerberosUserSid x
jsonparse wsargs "%7B%22KerberosUserSid%22:%22{KerberosUserSid}%22,%22AccessPermission%22:%%%accessPermission%%%,%22Realms%22:[%%%realms%%%]%7D"
wsexec "AMT_AuthorizationService" "AddUserAclEntryEx" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "Account {KerberosUserString} return value: {AMT_AuthorizationService.Body.ReturnValueStr}"

set PullUserInfo 1
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
```

--------------------------------

### Add Digest User Account

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Creates a new digest user account in Intel AMT by fetching the digest realm and executing a WSMAN command.

```MeshCommander Script
# Get the DigestRealm
jump :SkipDigestRealm-%%%~%%% DigestRealm "!="
print "Fetching digest realm..."
split ws_general_query "*AMT_GeneralSettings" ,
wsbatchenum "wsman_answer" ws_general_query
jump :error-%%%~%%% wsman_result "!=" 200
set DigestRealm wsman_answer.AMT_GeneralSettings.response.DigestRealm
:SkipDigestRealm-%%%~%%%

# Create account
set AccountName "%%%name%%%"
set AccountPass "%%%password%%%"
set digest "{AccountName}:{DigestRealm}:{AccountPass}"
md5 digestmd5 digest
btoa digestmd5 digestmd5
jsonparse wsargs "%7B %22DigestUsername%22:%22{AccountName}%22, %22DigestPassword%22:%22{digestmd5}%22, %22AccessPermission%22:%%%accessPermission%%%, %22Realms%22:[%%%realms%%%] %7D"
wsexec "AMT_AuthorizationService" "AddUserAclEntryEx" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "Account {AccountName} create: {AMT_AuthorizationService.Body.ReturnValueStr}"

set PullUserInfo 1
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
```

--------------------------------

### Execute Power State Change

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Performs a power state change on a managed system using WSMAN. Requires a valid power action code.

```MeshCommander Script
set ManagedElementXml "%3CAddress xmlns=\%22http://schemas.xmlsoap.org/ws/2004/08/addressing\%22%3Ehttp://schemas.xmlsoap.org/ws/2004/08/addressing%3C/Address%3E%3CReferenceParameters xmlns=\%22http://schemas.xmlsoap.org/ws/2004/08/addressing\%22%3E%3CResourceURI xmlns=\%22http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd\%22%3Ehttp://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_ComputerSystem%3C/ResourceURI%3E%3CSelectorSet xmlns=\%22http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd\%22%3E%3CSelector Name=\%22CreationClassName\%22%3ECIM_ComputerSystem%3C/Selector%3E%3CSelector Name=\%22Name\%22%3EManagedSystem%3C/Selector%3E%3C/SelectorSet%3E%3C/ReferenceParameters%3E"
jsonparse wsargs "%7B %22PowerState%22:%22%%%powerAction%%%%22, %22ManagedElement%22:%22{ManagedElementXml}%22 %7D"
set ManagedElementXml
wsexec "CIM_PowerManagementService" "RequestPowerStateChange" wsargs
set wsargs
jump :error-%%%~%%% wsman_result "!=" 200
set PullSystemStatus "1"
print "Power action completed"
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%

```

--------------------------------

### Configure Intel AMT KVM State

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Updates the KVM state for Intel AMT using the CIM_KVMRedirectionSAP class.

```MeshCommander Script
jsonparse wsargs "%7B %22RequestedState%22:%22%%%kvmEnabled%%%%22 %7D"
wsexec "CIM_KVMRedirectionSAP" "RequestStateChange" wsargs
jump :error-%%%~%%% wsman_result "!=" 200
set PullSystemStatus "1"
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%

```

--------------------------------

### Set User Consent Mode

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Configures the IPS_OptInService to define user consent requirements for Intel AMT.

```MeshCommander Script
split ws_optIn_query "*IPS_OptInService" ,
wsbatchenum "wsman_answer" ws_optIn_query
jump :error-%%%~%%% wsman_result "!=" 200
set wsman_answer.IPS_OptInService.response.OptInRequired %%%consentMode%%%
wsput "IPS_OptInService" wsman_answer.IPS_OptInService.response
jump :error-%%%~%%% wsman_result "!=" 200
set PullSystemStatus 1
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%

```

--------------------------------

### Computer List JSON Format

Source: https://github.com/ylianst/meshcommander/blob/master/switches.md

The format for the file used with the -list switch to load multiple computers into MeshCommander.

```json
{
  "computers": [
    { "name": "FriendlyName", "host": "hostname", "user": "admin", "pass": "password1", "tls": 0 },
    { "host": "hostname1", "user": "admin", "pass": "password2", "tls": 1 },
    { "host": "hostname1", "user": "*", "pass": "", "tls": 1 }
  ]
}
```

--------------------------------

### Add MPS Server via FQDN and User Credentials

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Adds a new CIRA server (MPS) using the server's hostname and authenticates via username and password.

```MeshCommander Script
# Set method parameters
jsonparse wsargs "%7B%22AccessInfo%22:%22%%%FQDN%%%%22,%22InfoFormat%22:201,%22Port%22:%%%Port%%%,%22AuthMethod%22:2,%22Username%22:%22%%%username%%%%22,%22Password%22:%22%%%password%%%%22%7D"
# Execute call to AddMpServer
wsexec "AMT_RemoteAccessService" "AddMpServer" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "Management Prescence Server (MPS) successfully added to the Intel(R) AMT Subsystem"
set PullRemoteAccess 1
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
set AMT_RemoteAccessService
set certHandle
set curSubject
set i
set pos
set ws_general_query
set wsargs
set wsman_answer
set wsman_result
set wsman_result_str
set certInstanceId
set wsman_ans_length
```

--------------------------------

### Set User Initiation State

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Enables or disables the Intel AMT Client Initiation Remote Access (CIRA) connection feature for local or user-initiated access.

```scriptblock
# Set method parameters
jsonparse wsargs "%7B%22RequestedState%22:%22%%%ReqState%%%%22%7D"
jsonparse EnumState "%7B%2232768%22:%22Disabled%22,%2232769%22:%22BIOS Enabled%22,%2232770%22:%22OS enable%22,%2232771%22:%22BIOS & OS Enabed%22%7D"
# Execute call to change the state
wsexec "AMT_UserInitiatedConnectionService" "RequestStateChange" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "SUCCESS: Remote Access user interfaces set to: {EnumState.%%%ReqState%%%}"

set PullRemoteAccess 1
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
set wsargs
set wsman_result
set wsman_result_str
set EnumState
set AMT_UserInitiatedConnectionService
```

--------------------------------

### Basic Variable and Flow Control

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Fundamental operations for variable arithmetic, connection management, and script flow control.

```MeshCommander Script
add %%%var%%% %%%var%%% %%%value%%%
```

```MeshCommander Script
Disconnect
```

```MeshCommander Script
:%%%label%%%
```

--------------------------------

### Issue Untrusted Certificate

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Generates a key pair and signs a certificate with an untrusted dummy root for Intel AMT.

```MeshCommander Script
jump :certificateSupport-%%%~%%% _certificates "=" 1
print "ERROR: No certificate support, this script block can't run in thei environment"
jump :end2-%%%~%%%
:certificateSupport-%%%~%%%

set CommonName "%%%CommonName%%%""
length x CommonName 
jump :skipSetCommonName-%%%~%%% x "!=" 0

split ws_general_query "*AMT_GeneralSettings" ,
wsbatchenum "wsman_answer" ws_general_query
jump :error-%%%~%%% wsman_result "!=" 200
set CommonName "{wsman_answer.AMT_GeneralSettings.response.HostName}"
length x CommonName 
jump :skipSetDomainName-%%%~%%% x "=" 0
set CommonName "{wsman_answer.AMT_GeneralSettings.response.HostName}.{wsman_answer.AMT_GeneralSettings.response.DomainName}"
:skipSetDomainName-%%%~%%%
:skipSetCommonName-%%%~%%%

jsonparse certattributes "%7B %22CN%22:%22{CommonName}%22, %22O%22:%22%%%Organization%%%%22, %22ST%22:%22%%%StateProvince%%%%22, %22C%22:%22%%%Country%%%%22 %7D"
jsonparse wsargs "%7B %22KeyAlgorithm%22:%220%22, %22KeyLength%22:%222048%22 %7D"
wsexec "AMT_PublicKeyManagementService" "GenerateKeyPair" wsargs
jump :error-%%%~%%% wsman_result "!=" 200
set selector AMT_PublicKeyManagementService.Body.KeyPair.ReferenceParameters.SelectorSet.Selector.Value
split ws_query "AMT_PublicPrivateKeyPair" ,
wsbatchenum "wsman_answer" ws_query
jump :error-%%%~%%% wsman_result "!=" 200
getitem i wsman_answer.AMT_PublicPrivateKeyPair.responses "InstanceID" selector
set DERKey wsman_answer.AMT_PublicPrivateKeyPair.responses.{i}.DERKey
signwithdummyca DERKey certattributes
jsonparse wsargs "%7B %22CertificateBlob%22:%22{signed_cert}%22 %7D"
wsexec "AMT_PublicKeyManagementService" "AddCertificate" wsargs
jump :error-%%%~%%% wsman_result "!=" 200
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
set PullCertificates 1
:end2-%%%~%%%

set i
set x
set wsman_answer
set selector
set AMT_PublicKeyManagementService
set ws_query
set AMT_PublicKeyManagementService
set DERKey
set wsargs

```

--------------------------------

### Add MPS Server via Certificate

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Configures a new CIRA server (MPS) by searching for a specific certificate common name and executing the AddMpServer method.

```MeshCommander Script
# Get the input from user for the CN to look for
# Get available certificates
split ws_general_query "AMT_PublicKeyCertificate" ,
wsbatchenum "wsman_answer" ws_general_query
length wsman_ans_length wsman_answer.AMT_PublicKeyCertificate.responses
set i 0
:loop_ans-%%%~%%%
# Get the current subject name
set curSubject wsman_answer.AMT_PublicKeyCertificate.responses.{i}.Subject
IndexOf pos curSubject "CN=%%%CN%%%" 
jump :cnFound-%%%~%%% pos ">=" 0
add i i 1
jump :loop_ans-%%%~%%% i "<" wsman_ans_length
jump :cnNotFound-%%%~%%%
:cnFound-%%%~%%%
# Set the reference to the certificate
set certInstanceId wsman_answer.AMT_PublicKeyCertificate.responses.{i}.InstanceID
set certHandle "%3CAddress%20xmlns=%22http://schemas.xmlsoap.org/ws/2004/08/addressing%22%3Ehttp://schemas.xmlsoap.org/ws/2004/08/addressing%3C/Address%3E%3CReferenceParameters%20xmlns=%22http://schemas.xmlsoap.org/ws/2004/08/addressing%22%3E%3CResourceURI%20xmlns=%22http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd%22%3Ehttp://intel.com/wbem/wscim/1/amt-schema/1/AMT_PublicKeyCertificate%3C/ResourceURI%3E%3CSelectorSet%20xmlns=%22http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd%22%3E%3CSelector%20Name=%22InstanceID%22%3E{certInstanceId}%3C/Selector%3E%3C/SelectorSet%3E%3C/ReferenceParameters%3E"
# Set method parameters
jsonparse wsargs "%7B%22AccessInfo%22:%22%%%FQDN%%%%22,%22InfoFormat%22:%22201%22,%22Port%22:%%%Port%%%,%22AuthMethod%22:%221%22%7D"
set wsargs.Certificate certHandle
# Execute call to AddMpServer
wsexec "AMT_RemoteAccessService" "AddMpServer" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "Management Prescence Server (MPS) successfully added to the Intel(R) AMT Subsystem"
set PullRemoteAccess 1
jump :end-%%%~%%%
:cnNotFound-%%%~%%%
print "Couldn't find a certificate matching the value of CN=%%%CN%%%"
:error-%%%~%%%
print "Call failed with error {wsman_result}"
:end-%%%~%%%
set AMT_RemoteAccessService
set certHandle
set curSubject
set i
set pos
set ws_general_query
set wsargs
set wsman_answer
set wsman_result
set wsman_result_str
set certInstanceId
set wsman_ans_length
```

--------------------------------

### Add Certificate to Intel AMT

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Uploads a chain or trusted root certificate to the Intel AMT certificate store.

```MeshCommander Script
jsonparse wsargs "%7B%7D"
set wsargs.CertificateBlob "%%%CertBin%%%"
jump :certroot %%%CertType%%% "=" 1
print "Adding certificate..."
wsexec "AMT_PublicKeyManagementService" "AddCertificate" wsargs
jump :certdone
:certroot
print "Adding root certificate..."
wsexec "AMT_PublicKeyManagementService" "AddTrustedRootCertificate" wsargs
:certdone
set wsargs
set AMT_PublicKeyManagementService
set PullCertificates 1

```

--------------------------------

### Add MPS Server via Certificate

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Configures a new CIRA server (MPS) by searching for a specific certificate and executing the AddMpServer method.

```MeshCommander Script
# Get the input from user for the CN to look for
# Get available certificates
split ws_general_query "AMT_PublicKeyCertificate" ,
wsbatchenum "wsman_answer" ws_general_query
length wsman_ans_length wsman_answer.AMT_PublicKeyCertificate.responses
set i 0
:loop_ans-%%%~%%%
# Get the current subject name
set curSubject wsman_answer.AMT_PublicKeyCertificate.responses.{i}.Subject
IndexOf pos curSubject "CN=%%%CN%%%" 
jump :cnFound-%%%~%%% pos ">=" 0
add i i 1
jump :loop_ans-%%%~%%% i "<" wsman_ans_length
jump :cnNotFound-%%%~%%%
:cnFound-%%%~%%%
# Set the reference to the certificate
set certInstanceId wsman_answer.AMT_PublicKeyCertificate.responses.{i}.InstanceID
set certHandle "%3CAddress%20xmlns=%22http://schemas.xmlsoap.org/ws/2004/08/addressing%22%3Ehttp://schemas.xmlsoap.org/ws/2004/08/addressing%3C/Address%3E%3CReferenceParameters%20xmlns=%22http://schemas.xmlsoap.org/ws/2004/08/addressing%22%3E%3CResourceURI%20xmlns=%22http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd%22%3Ehttp://intel.com/wbem/wscim/1/amt-schema/1/AMT_PublicKeyCertificate%3C/ResourceURI%3E%3CSelectorSet%20xmlns=%22http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd%22%3E%3CSelector%20Name=%22InstanceID%22%3E{certInstanceId}%3C/Selector%3E%3C/SelectorSet%3E%3C/ReferenceParameters%3E"
# Set method parameters
jsonparse wsargs "%7B%22AccessInfo%22:%22%%%IP%%%%22,%22InfoFormat%22:%223%22,%22Port%22:%%%Port%%%,%22AuthMethod%22:%221%22%7D"
set wsargs.Certificate certHandle
set wsargs.CN "%%%ServerName%%%"
# Execute call to AddMpServer
wsexec "AMT_RemoteAccessService" "AddMpServer" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "Management Prescence Server (MPS) successfully added to the Intel(R) AMT Subsystem"
set PullRemoteAccess 1
jump :end-%%%~%%%
:cnNotFound-%%%~%%%
print "Couldn't find a certificate matching the value of CN=%%%CN%%%"
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
set AMT_RemoteAccessService
set certHandle
set curSubject
set i
set pos
set ws_general_query
set wsargs
set wsman_answer
set wsman_result
set wsman_result_str
set certInstanceId
set wsman_ans_length
```

--------------------------------

### End Script Block

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Handles final system status pulls and script completion notification.

```MeshCommander Script
:end
jump :SkipPullSystemStatus PullSystemStatus "!=" 1
PullSystemStatus
:SkipPullSystemStatus
jump :SkipPullEventLog PullEventLog "!=" 1
PullEventLog
:SkipPullEventLog
jump :SkipPullAuditLog PullAuditLog "!=" 1
PullAuditLog
:SkipPullAuditLog
jump :SkipPullCertificates PullCertificates "!=" 1
PullCertificates
:SkipPullCertificates
jump :SkipPullWatchdog PullWatchdog "!=" 1
PullWatchdog
:SkipPullWatchdog
jump :SkipPullSystemDefense PullSystemDefense "!=" 1
PullSystemDefense
:SkipPullSystemDefense
jump :SkipPullHardware PullHardware "!=" 1
PullHardware
:SkipPullHardware
jump :SkipPullUserInfo PullUserInfo "!=" 1
PullUserInfo
:SkipPullUserInfo
jump :SkipPullRemoteAccess PullRemoteAccess "!=" 1
PullRemoteAccess
:SkipPullRemoteAccess
jump :SkipPullEventSubscriptions PullEventSubscriptions "!=" 1
pulleventsubscriptions
:SkipPullEventSubscriptions
print "Script Completed"
```

--------------------------------

### Add Event Subscription

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Registers a new event subscription with specified filter and URL parameters.

```MeshCommander Script
print "Adding subscription: %%%SubscriptionUrl%%%"
split filters "Intel(r) AMT:ME Presence,Intel(r) AMT:User,Intel(r) AMT:All,Intel(r) AMT:Platform,Intel(r) AMT:CorePlatform,Intel(r) AMT:Features,Intel(r) AMT:FW ProgressEvents" ","
set filter filters.%%%SubscriptionFilter%%%
jsonparse subfilter "%7B%22InstanceID%22:%22{filter}%22%7D"
wssubscribe "CIM_FilterCollection" "%%%SubscriptionType%%%" "%%%SubscriptionUrl%%%" subfilter "%%%SubscriptionArgs%%%"

# End of script
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
set filters
set filter
set subfilter
set PullEventSubscriptions 1

```

--------------------------------

### Set Script Speed

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Configures the execution delay between script steps in milliseconds.

```text
scriptspeed %%%delay%%%
```

--------------------------------

### Manage Intel AMT User Accounts

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Scripts for enumerating, searching, and deleting user accounts from Intel AMT.

```MeshCommander Script
GetSidByteArray ToggleAccount "%%%sid%%%"
btoa ToggleAccount ToggleAccount
# Fetch all of the account handles
print "Fetching account handles..."
jsonparse wsargs "%7B %22StartIndex%22:1 %7D"
wsexec "AMT_AuthorizationService" "EnumerateUserAclEntries" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
set AccountHandles AMT_AuthorizationService.Body.Handles
set wsargs
set AMT_AuthorizationService
set wsman_result
set wsman_result_str
length AccountHandlesCount AccountHandles

# Get all of the account information
print "Fetching all account information..."
set i 0
:fetchAccountLoop-%%%~%%%
set fetchHandle AccountHandles.{i}
jsonparse wsargs "%7B %22Handle%22:{fetchHandle} %7D"
wsexec "AMT_AuthorizationService" "GetAclEnabledState" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
set AccountEnabled{i} AMT_AuthorizationService.Body.Enabled
wsexec "AMT_AuthorizationService" "GetUserAclEntryEx" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
set AccountName{i} AMT_AuthorizationService.Body.KerberosUserSid
set AccountAccess{i} AMT_AuthorizationService.Body.AccessPermission
set AccountRealms{i} AMT_AuthorizationService.Body.Realms
add i i 1
jump :fetchAccountLoop-%%%~%%% i "<" AccountHandlesCount
set AMT_AuthorizationService
set fetchHandle
set wsargs

# Search for a matching account
print "Searching accounts..."
set i 0
:searchAccountLoop-%%%~%%%
set searchHandle AccountHandles.{i}
jump :foundAccount AccountName{i} "=" ToggleAccount
add i i 1
jump :searchAccountLoop-%%%~%%% i "<" AccountHandlesCount
jump :end-%%%~%%%

# Account found, delete it
:foundAccount
print "Account %%%sid%%% found at index {i}, deleting it..."
set deleteHandle AccountHandles.{i}
jsonparse wsargs "%7B %22Handle%22:{deleteHandle} %7D"
wsexec "AMT_AuthorizationService" "RemoveUserAclEntry" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "Done, account %%%sid%%% deleted."
set PullUserInfo 1
jump :end-%%%~%%%

# End of script
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
```

```MeshCommander Script
# Fetch all of the account handles
print "Fetching account handles..."
jsonparse wsargs "%7B %22StartIndex%22:1 %7D"
wsexec "AMT_AuthorizationService" "EnumerateUserAclEntries" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
set AccountHandles AMT_AuthorizationService.Body.Handles
set wsargs
set AMT_AuthorizationService
set wsman_result
set wsman_result_str
length AccountHandlesCount AccountHandles

# Get all of the account information
print "Fetching all account information..."
set i 0
:fetchAccountLoop-%%%~%%%
set fetchHandle AccountHandles.{i}
jsonparse wsargs "%7B %22Handle%22:{fetchHandle} %7D"
wsexec "AMT_AuthorizationService" "GetAclEnabledState" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
set AccountEnabled{i} AMT_AuthorizationService.Body.Enabled
wsexec "AMT_AuthorizationService" "GetUserAclEntryEx" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "AMT-ACCOUNT: {AMT_AuthorizationService.Body.DigestUsername}, {AMT_AuthorizationService.Body.AccessPermission}, [{AMT_AuthorizationService.Body.Realms}]"
add i i 1
jump :fetchAccountLoop-%%%~%%% i "<" AccountHandlesCount
set AMT_AuthorizationService
set fetchHandle
set wsargs

# End of script
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
```

--------------------------------

### Add MPS Server via Username/Password

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Configures a new CIRA server (MPS) using an IP address and username/password authentication.

```MeshCommander Script
# Set method parameters
jsonparse wsargs "%7B%22AccessInfo%22:%22%%%IP%%%%22,%22InfoFormat%22:%223%22,%22Port%22:%%%Port%%%,%22AuthMethod%22:%222%22,%22Username%22:%22%%%username%%%%22,%22Password%22:%22%%%password%%%%22%7D"
set wsargs.CN "%%%ServerName%%%"
# Execute call to AddMpServer
wsexec "AMT_RemoteAccessService" "AddMpServer" wsargs ""
jump :error-%%%~%%% wsman_result "!=" 200
print "Management Prescence Server (MPS) successfully added to the Intel(R) AMT Subsystem"
set PullRemoteAccess 1
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%
set AMT_RemoteAccessService
set wsargs
set wsman_answer
set wsman_result
set wsman_result_str
set wsman_ans_length
```

--------------------------------

### Set Ping Response

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Configures Intel AMT response settings for ICMP and RMCP ping requests.

```scriptblock
split ws_general_query "*AMT_GeneralSettings" ,
wsbatchenum "wsman_answer" ws_general_query
jump :error-2 wsman_result "!=" 200
set wsman_answer.AMT_GeneralSettings.response.PingResponseEnabled "%%%icmpPingResponse%%%"
set wsman_answer.AMT_GeneralSettings.response.RmcpPingResponseEnabled "%%%rmcpPingResponse%%%"
wsput "AMT_GeneralSettings" wsman_answer.AMT_GeneralSettings.response
jump :error-2 wsman_result "!=" 200
set PullSystemStatus "1"
jump :end-2
:error-2
print "Call failed: {wsman_result_str}"
:end-2

```

--------------------------------

### Set Variable

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Assigns a value to a specified variable name.

```text
set %%%var%%% %%%value%%%
```

--------------------------------

### Set Active Features

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Configures Intel AMT active features such as redirection ports and SOL/IDER states.

```MeshCommander Script
split ws_optIn_query "*AMT_RedirectionService" ,
wsbatchenum "wsman_answer" ws_optIn_query
jump :error-%%%~%%% wsman_result "!=" 200
set wsman_answer.AMT_RedirectionService.response.ListenerEnabled "%%%listenerEnabled%%%"
set wsman_answer.AMT_RedirectionService.response.EnabledState "%%%enabledState%%%"
jsonparse wsargs "%7B %22RequestedState%22:%22%%%enabledState%%%%22 %7D"
wsexec "AMT_RedirectionService" "RequestStateChange" wsargs
wsput "AMT_RedirectionService" wsman_answer.AMT_RedirectionService.response
jump :error-%%%~%%% wsman_result "!=" 200
set PullSystemStatus "1"
jump :end-%%%~%%%
:error-%%%~%%%
print "Call failed: {wsman_result_str}"
:end-%%%~%%%

```

--------------------------------

### Define Trusted CSME Root Hashes

Source: https://github.com/ylianst/meshcommander/blob/master/trustedCA/hashes.txt

An array of SHA-256 hashes representing trusted Intel OnDie CA root and intermediate certificates.

```javascript
var trustedCsmeRoots = [
    '3BA13766B1889DCB1E2D55BACCC9EC087452F78783E2EBAFD918FF4ED6ACC840', // www.intel.com / OnDie CA DEBUG Root Cert Signing CA
    'C001DF02B31A60A2B37130365956400A2AFCFD147E8552FD7EA3F17F2AB0D457', // www.intel.com / ODCA CA2 CSME Intermediate CA
    '5E3EEE5748AC13E0B3D1227FCDC4751AA1402DDE8031D21F63CB4ECF43F02440'  // www.intel.com / OnDie CA CSME Intermediate CA
];
```

--------------------------------

### Detect Wireless Intel AMT NIC

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Checks for the presence of a wireless Intel AMT Ethernet port and stores the result in the WiFiAmtNic variable.

```MeshCommander Script
split ws_general_query "CIM_EthernetPort"
wsbatchenum "wsman_answer" ws_general_query
set i -1
jump :error-%%%~%%% wsman_result "!=" 200
getitem i wsman_answer.CIM_EthernetPort.responses "DeviceID" "Intel(r) AMT Ethernet Port 1"
jump :amtCoreError-%%%~%%% i "<" 0
set WiFiAmtNic "true"
print "WiFi AMT NIC found: true"
jump :end-%%%~%%%
:amtCoreError-%%%~%%%
print "Wifi AMT NIC found: false"
jump :end-%%%~%%%
:error-%%%~%%%
print "WSMAN call failed: {wsman_result_str}"
:end-%%%~%%%
set i
set ws_general_query
set wsman_answer
set wsman_result
```

--------------------------------

### Conditional Jump

Source: https://github.com/ylianst/meshcommander/blob/master/scriptblocks.txt

Redirects script execution to a label if the comparison between two arguments evaluates to true.

```text
jump :%%%label%%% %%%arg1%%% "%%%comparator%%%" %%%arg2%%%
```