### Install Dependencies and Clone RebarDxe on Windows

Source: https://github.com/xcuri0/rebaruefi/wiki/Building

Installs necessary tools and clones the EDK2 repository for building ReBarDxe on Windows. Ensure Git and Python are in your PATH and use the VS Native Tools Command Prompt.

```batch
pip install pefile
git clone https://github.com/tianocore/edk2.git
cd edk2
git submodule update --init
edksetup.bat Rebuild
```

--------------------------------

### Install Dependencies and Clone RebarDxe on Linux

Source: https://github.com/xcuri0/rebaruefi/wiki/Building

Installs required Python packages and Git repositories for building ReBarDxe on Linux. Ensure edk2 submodules are updated and BaseTools are compiled before setting up the environment.

```bash
pip install pefile
git clone https://github.com/tianocore/edk2.git
cd edk2
git submodule update --init
make -C BaseTools
source ./edksetup.sh
```

--------------------------------

### Linux dmesg Output Example

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

This is an example output from the 'dmesg | grep "root bus resource"' command on Linux, showing the root bus resource ranges. It helps in determining if DSDT modification is needed.

```bash
[    0.161520] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.161522] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.161523] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.161525] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000effff window]
[    0.161526] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.161527] pci_bus 0000:00: root bus resource [mem 0x21e600000-0xfffffffff window]
```

--------------------------------

### Configure ReBarState Project

Source: https://github.com/xcuri0/rebaruefi/blob/master/ReBarState/CMakeLists.txt

Sets the minimum CMake version, project name, and C++ standard. This is a standard setup for most CMake projects.

```cmake
cmake_minimum_required (VERSION 3.8)

project ("ReBarState")
set(CMAKE_CXX_STANDARD 17)
```

--------------------------------

### Original DSDT CreateQWordField Example

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

This ASL code snippet shows the original 'CreateQWordField' definitions found in a stock DSDT. It defines fields for length, minimum, and maximum base addresses.

```asl
CreateQWordField (BUF0, \_SB.PCI0._Y0F._LEN, M2LN)  // _LEN: Length
CreateQWordField (BUF0, \_SB.PCI0._Y0F._MIN, M2MN)  // _MIN: Minimum Base Address
CreateQWordField (BUF0, \_SB.PCI0._Y0F._MAX, M2MX)  // _MAX: Maximum Base Address
M2LN = 0x0000000400000000
If ((TUUD >= 0x1000))
{
    M2MN = (TUUD << 0x14)
}
Else
{
    M2MN = 0x0000000100000000
}

M2MX = ((M2MN + M2LN) - One)
```

--------------------------------

### Modifying BIOS Variable with grub-mod-setup_var

Source: https://github.com/xcuri0/rebaruefi/wiki/Enabling-hidden-4G-decoding

Use grub-mod-setup_var to change the value of the 4G decoding BIOS variable. Replace '(offset)' with the actual offset found in the .txt file. If the variable is already 0x1, you may need to toggle it by setting it to 0x0, rebooting, then setting it to 0x1 and rebooting again. If a GUID mismatch error occurs, it can be safely ignored. 'setup_var_3' can be used as an alternative if 'setup_var' fails.

```bash
setup_var (offset) 0x1
```

```bash
setup_var (offset) 0x0
```

```bash
setup_var_3 (offset) 0x1
```

--------------------------------

### Convert MBR to GPT for Windows Boot

Source: https://github.com/xcuri0/rebaruefi/wiki/Common-issues-(and-fixes)

After disabling CSM, Windows may fail to boot. Convert your legacy MBR installation to UEFI GPT to resolve this. Refer to the provided guide for detailed steps.

```markdown
You need to [convert your legacy MBR installation to UEFI GPT](https://www.windowscentral.com/how-convert-mbr-disk-gpt-move-bios-uefi-windows-10).
```

--------------------------------

### Enable 64-bit MMIO Region (Haswell/Broadwell)

Source: https://github.com/xcuri0/rebaruefi/wiki/Sandy-and-Ivy-Bridge-or-Haswell-and-Broadwell-32GB-BAR-(and-above)-DSDT-modification

This modification makes the 64-bit MMIO region available even when 4G decoding is turned off. Use this on ASRock systems if the DSDT does not contain the specific code mentioned in the guide.

```ACPI
If (0)
```

--------------------------------

### Fix: Length is larger than Min/Max window

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

Recalculate the 'Length' value by subtracting 'Min' from 'Max' and adding one. This example shows correcting an incorrect 'Length' value.

```dsl
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
	0x00000000,         // Granularity
	0x02000000,         // Range Minimum
	0xFFDFFFFF,         // Range Maximum
	0x00000000,         // Translation Offset
	0xFDFC0000,         // Length
	,, _Y04, AddressRangeMemory, TypeStatic)

```

```dsl
0xFDE00000
```

--------------------------------

### BAR Size Requirement

Source: https://github.com/xcuri0/rebaruefi/wiki/Common-issues-(and-fixes)

The required BAR size should be sufficient to fit all of your VRAM. For example, 8GB is enough for 8GB VRAM, and 16GB is sufficient for 12GB VRAM. GPUs typically do not support BARs larger than what's needed for their VRAM.

```markdown
you only need a BAR size that fits all your VRAM. So 8GB is enough for 8GB VRAM and 16GB is enough for 12GB VRAM. GPUs also don't typically support BARs more than what's needed to fit all their VRAM
```

--------------------------------

### Configure Target for ReBarDxe Build on Linux

Source: https://github.com/xcuri0/rebaruefi/wiki/Building

Sets the build target and architecture in the target.txt configuration file for ReBarDxe. Adjust TOOL_CHAIN_TAG if using a different compiler.

```bash
TARGET = RELEASE
TARGET_ARCH           = X64
TOOL_CHAIN_TAG        = GCC5 # change this if you want to use Clang
```

--------------------------------

### Build ReBarDxe FFS File on Linux

Source: https://github.com/xcuri0/rebaruefi/wiki/Building

Clones the ReBarUEFI repository and builds the FFS file using the provided Python script. The output FFS file will be located in a specific build directory.

```bash
git clone https://github.com/xCuri0/ReBarUEFI.git
cd ReBarUEFI/ReBarDxe
python3 ./buildffs.py
```

--------------------------------

### Extracting BIOS Variable Offset with IRFExtractor-RS

Source: https://github.com/xcuri0/rebaruefi/wiki/Enabling-hidden-4G-decoding

Run IRFExtractor-RS on the extracted BIOS body to generate a .txt file containing variable information. This file is used to find the offset for the 4G decoding setting.

```bash
IRFExtractor-RS 4GDecodBody.bin
```

--------------------------------

### Build ReBarState on Linux

Source: https://github.com/xcuri0/rebaruefi/wiki/Building

Clones the ReBarUEFI repository and builds the ReBarState executable using CMake. The executable will be found in the 'build' folder.

```bash
git clone https://github.com/xCuri0/ReBarUEFI.git
cd ReBarUEFI/ReBarState
mkdir build
cd build
cmake ..
make
```

--------------------------------

### Configure Target for ReBarDxe Build on Windows

Source: https://github.com/xcuri0/rebaruefi/wiki/Building

Specifies the build target and architecture in target.txt for ReBarDxe. The TOOL_CHAIN_TAG should match your Visual Studio version; VS2019 is compatible with VS2022.

```batch
TARGET = RELEASE
TARGET_ARCH           = X64
TOOL_CHAIN_TAG        = VS2019 # works with Visual Studio 2022 too. EDK2 doesn't support 2022 officially atm.
```

--------------------------------

### Create Modified AmiBoardInfo EFI

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

Use AmiBoardInfoTool to create a new modified AmiBoardInfo.efi file by incorporating the patched DSDTMod.aml. This step is crucial for applying the DSDT changes to the BIOS.

```bash
AmiBoardInfoTool -a AmiBoardInfo.efi -d DSDTMod.aml -o AmiBoardInfoMod.efi
```

--------------------------------

### UEFI Module Function Replacement

Source: https://github.com/xcuri0/rebaruefi/blob/master/README.md

The ReBarDxe module replaces the original 'PreprocessController' function to check for Resizable BAR capability and set it based on NVRAM variables.

```c
UINT32
PreprocessController (void)
{
  UINT32 OriginalFunctionResult;
  OriginalFunctionResult = PciHostBridgeResourceAllocationProtocol->PreprocessController ();
  if (PciHostBridgeResourceAllocationProtocol->Hdr.Revision >= V1_0_2)
  {
    if (PciHostBridgeResourceAllocationAllocationPhase == AllocatePhaseMax)
    {
      if (PciHostBridgeResourceAllocationProtocol->DevicePath->Type == HARDWARE_DEVICE_PATH && PciHostBridgeResourceAllocationProtocol->DevicePath->SubType == HW_MEMMAP_DEVICE_PATH)
      {
        if (PciHostBridgeResourceAllocationProtocol->Hdr.Device.VendorId == 0x10DE && PciHostBridgeResourceAllocationProtocol->Hdr.Device.DeviceId == 0x1B80)
        {
          if (PciHostBridgeResourceAllocationProtocol->Hdr.Device.RevisionId == 0xA1)
          {
            if (PciHostBridgeResourceAllocationProtocol->Hdr.Device.SubsystemVendorId == 0x1462 && PciHostBridgeResourceAllocationProtocol->Hdr.Device.SubsystemDeviceId == 0x5007)
            {
              PciHostBridgeResourceAllocationProtocol->Hdr.Device.MaxReadSize = 0x10000000000000000ULL;
            }
          }
        }
      }
    }
  }
  return OriginalFunctionResult;
}
```

--------------------------------

### Enable Resizable BAR on Unsupported AMD GPUs via Registry

Source: https://github.com/xcuri0/rebaruefi/wiki/Common-issues-(and-fixes)

Apply this .reg file to enable Resizable BAR on unsupported AMD GPUs. A reboot is required after applying. Note that the GPU registry path may vary if multiple GPUs or an iGPU are present.

```reg
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]
"KMD_RebarControlMode"=dword:00000001
"KMD_RebarControlSupport"=dword:00000001
"KMD_EnableReBarForLegacyASIC"=dword:00000001
```

--------------------------------

### Modified DSDT CreateQWordField for 64GB

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

This ASL code snippet shows the modified 'CreateQWordField' definitions. It sets the maximum base address to 'FFFFFFFFF' for 36-bit addressing (64GB), suitable for Sandy/Ivy Bridge CPUs, and adjusts the length calculation.

```asl
CreateQWordField (BUF0, \_SB.PCI0._Y0F._LEN, M2LN)  // _LEN: Length
CreateQWordField (BUF0, \_SB.PCI0._Y0F._MIN, M2MN)  // _MIN: Minimum Base Address
CreateQWordField (BUF0, \_SB.PCI0._Y0F._MAX, M2MX)  // _MAX: Maximum Base Address
// 36-bit / 64GB is highest supported by Sandy/Ivy Bridge
M2MX = 0xFFFFFFFFF

If ((TUUD >= 0x1000))
{
    M2MN = (TUUD << 0x14)
}
Else
{
    M2MN = 0x0000000100000000
}

M2LN = (M2MX - M2MN) + One
```

--------------------------------

### Adjust MMIO Limit for Stutters and Boot Issues

Source: https://github.com/xcuri0/rebaruefi/wiki/Common-issues-(and-fixes)

To potentially fix stutters on Ryzen systems or boot issues with macOS, try setting 'Above 4GB MMIO Limit' to '512GB' (39-bit). This addresses a firmware bug.

```markdown
You can also try setting ```Above 4GB MMIO Limit``` to ```512GB``` (39-bit) to see if it helps. This may also fix boot issues with macOS.
```

--------------------------------

### Add QWordMemory definition to DSDT

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

Append this QWordMemory definition to your DSDT.dsl file after the last DWordMemory entry. This is for Haswell and up systems to define memory ranges.

```asl
QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
    0x0000000000000000, // Granularity
    0x0000000000010000, // Range Minimum
    0x000000000001FFFF, // Range Maximum
    0x0000000000000000, // Translation Offset
    0x0000000000010000, // Length
    ,, _YAF, AddressRangeMemory, TypeStatic)

```

--------------------------------

### Fix: _HID prefix must be all uppercase or decimal digits

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

Correct the '_HID prefix must be all uppercase or decimal digits' error by changing the '_HID' prefix to uppercase and removing any leading 'X'.

```dsl
Name (_HID, "PNP0C14")
```

--------------------------------

### Reduce DSDT Size for AmiBoardInfoTool

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

If AmiBoardInfoTool reports 'ERROR: PE32 has .ROM but not DYNAMIC_BASE set -> Unpatchable atm..', remove unneeded ACPI _OSI entries. Further size reduction can be achieved by removing specific devices or strings.

```dsl
Remove all ADBG lines
```

```dsl
Remove device BAT0 / BAT1 / BAT2
```

```dsl
Remove device DOCK
```

```dsl
Remove device LID0
```

```dsl
Remove SLIC string if you don't use SLI
```

--------------------------------

### MMTool Hashes for Verification

Source: https://github.com/xcuri0/rebaruefi/wiki/Adding-FFS-module

Verify the integrity of your MMTool download using these checksums. Different versions are recommended for different motherboard architectures.

```plaintext
MMTool.exe v5.2.0.25 (5.02.0025) 64bit
MD5: D47DD4B0BE0FD99A875B81FF6AFE1738
SHA1: 2747FF08AC3A33B868211D7E1BEE35C2CF3A79F1
SHA256: 5D05D0BBEA720D4B73DC66DB55031C2659458696B9F143DF3B7E2F43040289CC

MMTool.exe v5.2.0.24 (5.02.0024) Patched
MD5: C6FC1435CBDE2636B33E4F7EE444A079
SHA1: 8E54AC68DE355E1031527B89C0560AE1C9C8C508
SHA256: 51A85A663B1CB819508E48FD650180E6C79AFD06FB458DD1357508FD9578FC23

MMTool.exe v5.2.0.24 (5.02.0024)
MD5: 9AB78D9BD2A417BB9308B3D3CC6FEF59
SHA1: FBA82BD83C603700E6763ED8A9C5633980822C21
SHA256: BBC3E75905997DDC05C523E57A72E49BBFCAF84DCA64E460F10F8553B7FDA9EE

MMTool.exe v5.1.0.12 (5.01.0012) 64bit
MD5: 897FA27EFED40D1DFFA910E7827C8EDE
SHA1: 287C6977966EEEFD38988C75A6F5D03F7C2214B2
SHA256: 0F936AD23BC6EC3D2F0D722DC05EED921472F021E3DA06ADFF13A8A2AE479439

MMTool.exe v5.1.0.12 (5.01.0012) 32bit
MD5: 020A08867A26E23337ABA93D2720AC9E
SHA1: BA60CBEB44B7010850A0CCAFE821502E14ED7D4F
SHA256: 6F0000914C490932BD9B6CC83325F6D622322716F1DEAF9B565A7D0A6B73438A

MMTool.exe v5.0.0.7 (5.00.0007)
MD5: 6BE9244F9E5415BF04EFBC441D2CCBD8
SHA1: A37872D43B01DC39A28BB086FFB066C2F5BF735A
SHA256: 28049163FD1E3423C42B229A5F6ED877F14E7CAF3B794BF7EFB970B375E6FF41

MMTool.exe v4.50.0.23 (4.50.0023)
MD5: 0575DCDC6897B3914748DBFE97770AF3
SHA1: A3E47E29A2F79D67E111B5917E61AAD0B64C6F93
SHA256: 7D0377A72E67E5A71400361416452440826832AEB2C9BEBAA578E8AF962EAAFD

MMTool.exe v3.26
MD5: 699E36577BCCF66090EC6095FF23C000
SHA1: 05D81E32820D6618F0B77990FA376764615C5BD8
SHA256: C5A64EA7CE2BEA8556FA81E0069ADBBA793181BFAA76F59F4F472F0A471BAC98
```

--------------------------------

### Add ReBarState Executable

Source: https://github.com/xcuri0/rebaruefi/blob/master/ReBarState/CMakeLists.txt

Defines the main executable target for the ReBarState project, linking the primary source file.

```cmake
add_executable (ReBarState "ReBarState.cpp")
```

--------------------------------

### Adjust 64-bit MMIO Region Size (Haswell/Broadwell)

Source: https://github.com/xcuri0/rebaruefi/wiki/Sandy-and-Ivy-Bridge-or-Haswell-and-Broadwell-32GB-BAR-(and-above)-DSDT-modification

This change modifies the 64-bit MMIO region to end at 39-bit/512GB, utilizing the full physical address range. This is intended for Haswell and up systems.

```ACPI
M2MX = 0x8000000000 - One
M2MN = M64B 
M2LN = ((M2MX - M2MN) + One)
```

--------------------------------

### Extract DSDT with AmiBoardInfoTool

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

Use this command to extract the compiled DSDT from AmiBoardInfo.efi to a .aml file. Ensure you have the modified BIOS image and AmiBoardInfo.efi prepared.

```bash
AmiBoardInfoTool -a AmiBoardInfo.efi -d DSDT.aml
```

--------------------------------

### Fix: _UID inside processor declaration must be an integer

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

Use regex to fix '_UID inside processor declaration must be an integer' errors. Find 'Name\s+\(_UID,\s*"PCI\d\-CP(.*)"\)' and replace it with 'Name \(_UID, 0x0$1\)'.

```regex
Name\s+\(_UID,\s*"PCI\d\-CP(.*)"\)
```

```regex
Name \(_UID, 0x0$1\)
```

--------------------------------

### Set Windows Administrator Manifest

Source: https://github.com/xcuri0/rebaruefi/blob/master/ReBarState/CMakeLists.txt

Conditionally applies linker flags on Windows to ensure the ReBarState executable runs with administrator privileges.

```cmake
if(WIN32)
    set_target_properties(ReBarState PROPERTIES LINK_FLAGS " /MANIFESTUAC:\"level='requireAdministrator' uiAccess='false'\" ")
endif()
```

--------------------------------

### Set Resizable BAR Size

Source: https://github.com/xcuri0/rebaruefi/wiki/Flashing-modified-UEFI

Use ReBarState to set the Resizable BAR size. '32' typically means unlimited. Smaller sizes like 13 (8GB) or 14 (16GB) can be used if '32' causes issues. Note that maximum allowed BAR size is 2^n.

```text
32
```

--------------------------------

### Fix: Invalid object type for reserved name (_PLD: found Integer)

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

To fix '_PLD: found Integer' errors, use regex to find '(Name\s*\(_PLD,\s*)Package(\s\([^\)].*\)[^\)]*)' and replace it with '$1Package() { Buffer$2}'.

```regex
(Name\s*\(_PLD,\s*)Package(\s\([^\)].*\)[^\)]*)
```

```regex
$1Package() { Buffer$2}
```

--------------------------------

### AddMemorySpace Function Offset in DXE Services Table

Source: https://github.com/xcuri0/rebaruefi/wiki/Using-UEFIPatch

Explains how to locate the `AddMemorySpace` function within the DXE Services table by referencing its offset. This is crucial for understanding UEFI memory management patching.

```c
0x18
```

--------------------------------

### Force Enable Resizable BAR on NVIDIA GPUs

Source: https://github.com/xcuri0/rebaruefi/wiki/Flashing-modified-UEFI

NVIDIA GPUs only enable Resizable BAR for games in their whitelist by default. Use Nvidia Profile Inspector to force enable it for all applications.

```text
Nvidia Profile Inspector
```

--------------------------------

### Fix: _HID suffix must be all hex digits

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

To resolve the '_HID suffix must be all hex digits' error, replace the placeholder 'ABCDEFGH' with 'ABCDEFFF' on the indicated line.

```dsl
Replace ABCDEFGH with ABCDEFFF
```

--------------------------------

### Modify Large Memory Region Exposure (Sandy/Ivy Bridge - Alternative)

Source: https://github.com/xcuri0/rebaruefi/wiki/Sandy-and-Ivy-Bridge-or-Haswell-and-Broadwell-32GB-BAR-(and-above)-DSDT-modification

This code change is an alternative for systems, like some Dell prebuilts, that do not have the `If (((MM64 == Zero) || (OSYS <= 0x07D3)))` condition. It modifies the `ElseIf (E4GM)` to `Else` and removes a specific block.

```ACPI
Else
{
	CreateDWordField (BUF0, \_SB.PCI0._Y0F._LEN, M4LN)  // _LEN: Length
	M4LN = Zero
}
```

--------------------------------

### Decompile DSDT with iasl

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

Use the iasl tool to decompile the extracted DSDT.aml file into a human-readable DSDT.dsl format for modification. Ensure you have the correct version of iasl for your OS.

```bash
iasl DSDT.aml
```

--------------------------------

### BAR Size for LGA1151 POST and Corruption Fix

Source: https://github.com/xcuri0/rebaruefi/wiki/Common-issues-(and-fixes)

If your LGA1151 system won't POST or displays graphical corruption even after patching, use a BAR size of 4GB or larger as a workaround.

```markdown
the workaround is just use a BAR size of 4GB or larger.
```

--------------------------------

### Set BAR Size for RX 5600 XT Sleep Fix

Source: https://github.com/xcuri0/rebaruefi/wiki/Common-issues-(and-fixes)

If your RX 5600 XT does not resume from sleep on Windows, try setting the BAR size to 1GB or lower. This is a workaround for VBIOS implementation issues.

```markdown
Set BAR size to **1GB** or lower.
```

--------------------------------

### Check 4G Decoding on Linux

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

Run this command in Linux to check if 4G decoding is enabled by examining the root bus resource. If the last entry ends at 'fffffffff' or above, DSDT modification may not be necessary.

```bash
sudo dmesg | grep "root bus resource"
```

--------------------------------

### Compile Modified DSDT

Source: https://github.com/xcuri0/rebaruefi/wiki/DSDT-Patching

After modifying the DSDT.dsl file, use the iasl tool again to recompile it into DSDTMod.aml. Any errors reported by iasl must be manually corrected.

```bash
iasl DSDTMod.dsl
```