### Start a NetworkTables Server

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/networktables/networktables-networking.rst

Initialize and start a NetworkTables server instance.

```java
NetworkTableInstance inst = NetworkTableInstance.getDefault();
inst.startServer();
```

```c++
nt::NetworkTableInstance inst = nt::NetworkTableInstance::GetDefault();
inst.StartServer();
```

```c++
NT_Inst inst = nt::GetDefaultInstance();
nt::StartServer(inst, "networktables.json", "", NT_DEFAULT_PORT3, NT_DEFAULT_PORT4);
```

```c
NT_Inst inst = NT_GetDefaultInstance();
NT_StartServer(inst, "networktables.json", "", NT_DEFAULT_PORT3, NT_DEFAULT_PORT4);
```

```python
import ntcore
inst = ntcore.NetworkTableInstance.get_default()
inst.start_server()
```

--------------------------------

### Simple CameraServer Implementation

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/vision-processing/roborio/using-the-cameraserver-on-the-roborio.rst

Initializes and starts a USB camera stream for dashboard viewing.

```java
import edu.wpi.first.cameraserver.CameraServer;
import edu.wpi.first.wpilibj.TimedRobot;

public class Robot extends TimedRobot {
  @Override
  public void robotInit() {
    // This starts the camera server and automatically captures
    // the USB camera and sends it to the dashboard.
    CameraServer.startAutomaticCapture();
  }
}
```

```c++
#include <cameraserver/CameraServer.h>
#include <frc/TimedRobot.h>

class Robot : public frc::TimedRobot {
 public:
  void RobotInit() override {
    // This starts the camera server and automatically captures
    // the USB camera and sends it to the dashboard.
    frc::CameraServer::StartAutomaticCapture();
  }
};
```

```python
import wpilib
from cscore import CameraServer

class MyRobot(wpilib.TimedRobot):
    def robotInit(self):
        # This starts the camera server and automatically captures
        # the USB camera and sends it to the dashboard.
        CameraServer.startAutomaticCapture()
```

--------------------------------

### Install dependencies on Ubuntu

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/contributing/wpilib-docs/build-instructions.rst

Use these commands to install the necessary Python and LaTeX packages for building documentation on Ubuntu.

```console
$ sudo apt update
$ sudo apt install python3
$ sudo apt install -y texlive-latex-recommended texlive-fonts-recommended texlive-latex-extra latexmk texlive-lang-greek texlive-luatex texlive-xetex texlive-fonts-extra dvipng librsvg2-bin
```

--------------------------------

### Implement a Simple Command

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/commandbased/commands-v2/commands.rst

Examples of a command that performs a single action and terminates immediately.

```java
package frc.robot.commands;

import edu.wpi.first.wpilibj2.command.Command;
import frc.robot.subsystems.HatchSubsystem;

public class GrabHatch extends Command {
  private final HatchSubsystem m_hatchSubsystem;

  public GrabHatch(HatchSubsystem subsystem) {
    m_hatchSubsystem = subsystem;
    addRequirements(m_hatchSubsystem);
  }

  @Override
  public void initialize() {
    m_hatchSubsystem.grabHatch();
  }

  @Override
  public boolean isFinished() {
    return true;
  }
}
```

```cpp
#pragma once

#include <frc2/command/Command.h>
#include <frc2/command/CommandHelper.h>

#include "subsystems/HatchSubsystem.h"

class GrabHatch : public frc2::CommandHelper<frc2::Command, GrabHatch> {
 public:
  explicit GrabHatch(HatchSubsystem* subsystem);

  void Initialize() override;

  bool IsFinished() override;

 private:
  HatchSubsystem* m_hatchSubsystem;
};
```

```cpp
#include "commands/GrabHatch.hpp"

GrabHatch::GrabHatch(HatchSubsystem* subsystem)
    : m_hatchSubsystem(subsystem) {
  AddRequirements(subsystem);
}

void GrabHatch::Initialize() {
  m_hatchSubsystem->GrabHatch();
}

bool GrabHatch::IsFinished() {
  return true;
}
```

```python
import commands2
from subsystems.hatchsubsystem import HatchSubsystem

class GrabHatch(commands2.Command):
    def __init__(self, subsystem: HatchSubsystem) -> None:
        super().__init__()
        self.hatchSubsystem = subsystem
        self.addRequirements(subsystem)

    def initialize(self) -> None:
        self.hatchSubsystem.grabHatch()

    def isFinished(self) -> bool:
        return True
```

--------------------------------

### Start a NetworkTables Client

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/networktables/networktables-networking.rst

Initialize and start a NetworkTables client instance with various connection methods.

```java
NetworkTableInstance inst = NetworkTableInstance.getDefault();
// start a NT4 client
inst.startClient4("example client");
// connect to a roboRIO with team number TEAM
inst.setServerTeam(TEAM);
// starting a DS client will try to get the roboRIO address from the DS application
inst.startDSClient();
// connect to a specific host/port
inst.setServer("host", NetworkTableInstance.kDefaultPort4)
```

```c++
nt::NetworkTableInstance inst = nt::NetworkTableInstance::GetDefault();
// start a NT4 client
inst.StartClient4("example client");
// connect to a roboRIO with team number TEAM
inst.SetServerTeam(TEAM);
// starting a DS client will try to get the roboRIO address from the DS application
inst.StartDSClient();
// connect to a specific host/port
inst.SetServer("host", NT_DEFAULT_PORT4)
```

```c++
NT_Inst inst = nt::GetDefaultInstance();
// start a NT4 client
nt::StartClient4(inst, "example client");
// connect to a roboRIO with team number TEAM
nt::SetServerTeam(inst, TEAM);
// starting a DS client will try to get the roboRIO address from the DS application
nt::StartDSClient(inst);
// connect to a specific host/port
nt::SetServer(inst, "host", NT_DEFAULT_PORT4)
```

```c
NT_Inst inst = NT_GetDefaultInstance();
// start a NT4 client
NT_StartClient4(inst, "example client");
// connect to a roboRIO with team number TEAM
NT_SetServerTeam(inst, TEAM);
// starting a DS client will try to get the roboRIO address from the DS application
NT_StartDSClient(inst);
// connect to a specific host/port
NT_SetServer(inst, "host", NT_DEFAULT_PORT4)
```

```python
import ntcore
inst = ntcore.NetworkTableInstance.get_default()
// start a NT4 client
inst.start_client4("example client")
// connect to a roboRIO with team number TEAM
inst.set_server_team(TEAM)
// starting a DS client will try to get the roboRIO address from the DS application
inst.startDSClient()
// connect to a specific host/port
inst.set_server("host", ntcore.NetworkTableInstance.kDefaultPort4)
```

--------------------------------

### Extract and Run WPILib Installer on Linux

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/zero-to-robot/step-2/wpilib-setup.rst

Commands to extract the tarball and execute the installer binary in a terminal environment.

```console
$ tar -xf WPILib_Linux-<version>.tar.gz
$ cd WPILib_Linux-<version>/
$ ./WPILibInstaller
```

--------------------------------

### Configure Commands in RobotContainer

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/commandbased/commands-v2/commands.rst

Examples of instantiating and binding commands within the RobotContainer class.

```java
    m_drive.setDefaultCommand(
        new DefaultDrive(
            m_drive,
            () -> -m_driverController.getLeftY(),
            () -> -m_driverController.getRightX()));

    new JoystickButton(m_driverController, Button.kA.value)
        .onTrue(new GrabHatch(m_hatchSubsystem));
```

```cpp
  m_drive.SetDefaultCommand(DefaultDrive(
      &m_drive, [this] { return -m_driverController.GetLeftY(); },
      [this] { return -m_driverController.GetRightX(); }));

  frc2::JoystickButton(&m_driverController, 1)
      .OnTrue(GrabHatch(&m_hatchSubsystem).ToPtr());
```

```python
        self.drive.setDefaultCommand(
            DefaultDrive(
                self.drive,
                lambda: -self.driverController.getLeftY(),
                lambda: -self.driverController.getRightX(),
            )
        )

        commands2.button.JoystickButton(self.driverController, 1).onTrue(
            GrabHatch(self.hatchSubsystem)
        )
```

--------------------------------

### Basic Drivetrain Implementation

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/zero-to-robot/step-4/creating-test-drivetrain-program-cpp-java-python.rst

Standard robot drivetrain boilerplate for PWM-controlled motors. These examples serve as a starting point for robot control logic.

```java
/*
 * The remoteliteralinclude directive was used in the source, but the content is not provided inline.
 */
```

```cpp
/*
 * The remoteliteralinclude directive was used in the source, but the content is not provided inline.
 */
```

```python
/*
 * The remoteliteralinclude directive was used in the source, but the content is not provided inline.
 */
```

--------------------------------

### Initialize NetworkTables Client

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/networktables/client-side-program.rst

Demonstrates setting up a NetworkTables client, subscribing to topics, and connecting to the robot server.

```c
#include <stdio.h>
#include <threads.h>
#include <time.h>
#include <networktables/wpi/nt/ntcore.h>
int main() {
  NT_Instance inst = NT_GetDefaultInstance();
  NT_Subscriber xSub =
      NT_Subscribe(NT_GetTopic(inst, "/datatable/x"), NT_DOUBLE, "double", NULL, 0);
  NT_Subscriber ySub =
      NT_Subscribe(NT_GetTopic(inst, "/datatable/y"), NT_DOUBLE, "double", NULL, 0);
  NT_StartClient4(inst, "example client");
  NT_SetServerTeam(inst, TEAM);  // where TEAM=190, 294, etc, or use inst.setServer("hostname") or similar
  NT_StartDSClient(inst);  // recommended if running on DS computer; this gets the robot IP from the DS
  while (true) {
    thrd_sleep(&(struct timespec){.tv_sec=1}, NULL);
    double x = NT_GetDouble(xSub, 0.0);
    double y = NT_GetDouble(ySub, 0.0);
    printf("X: %f Y: %f\n", x, y);
  }
}
```

```python
#!/usr/bin/env python3
import ntcore
import time
if __name__ == "__main__":
    inst = ntcore.NetworkTableInstance.get_default()
    table = inst.get_table("datatable")
    x_sub = table.get_double_topic("x").subscribe(0)
    y_sub = table.get_double_topic("y").subscribe(0)
    inst.start_client4("example client")
    inst.set_server_team(TEAM) # where TEAM=190, 294, etc, or use inst.set_server("hostname") or similar
    inst.startDSClient() # recommended if running on DS computer; this gets the robot IP from the DS
    while True:
        time.sleep(1)
        x = x_sub.get()
        y = y_sub.get()
        print(f"X: {x} Y: {y}")
```

--------------------------------

### Install RobotPy on macOS

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/zero-to-robot/step-2/python-setup.rst

Commands for installing or upgrading RobotPy on macOS using python3.

```sh
python3 -m pip install robotpy
```

```sh
python3 -m pip install --upgrade robotpy
```

```sh
python3 -m pip install --user robotpy
```

--------------------------------

### Instantiating and Using Command Factories

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/commandbased/commands-v2/organizing-command-based.rst

Demonstrates how to instantiate a command factory class and use it to generate commands.

```java
AutoRoutines autoRoutines = new AutoRoutines(this.drivetrain, this.intake);
Command driveAndIntake = autoRoutines.driveAndIntake();
Command driveThenIntake = autoRoutines.driveThenIntake();
Command drivingAndIntakingSequence = Commands.sequence(
  autoRoutines.driveAndIntake(),
  autoRoutines.driveThenIntake()
);
```

```c++
// TODO
```

--------------------------------

### Launch VisualVM via Command Line

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/advanced-gradlerio/profiling-with-visualvm.rst

Navigate to the VisualVM binary directory and launch it using the WPILib JDK path.

```bash
cd "C:\Users\Public\wpilib\visualvm_2110\bin"
./visualvm --jdkhome "C:\Users\Public\wpilib\2025\jdk"
```

--------------------------------

### Install RobotPy on Windows

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/zero-to-robot/step-2/python-setup.rst

Commands for installing or upgrading RobotPy on Windows using the py launcher.

```sh
py -3 -m pip install robotpy
```

```sh
py -3 -m pip install --upgrade robotpy
```

```sh
py -3 -m pip install --user robotpy
```

--------------------------------

### Publishing to a Topic in Python

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/networktables/publish-and-subscribe.rst

Demonstrates how to initialize a publisher, set values with various options, and close the publisher when finished.

```python
class Example:
    def __init__(self, dblTopic: ntcore.DoubleTopic):
        # start publishing; the return value must be retained (in this case, via
        # an instance variable)
        self.dblPub = dblTopic.publish()
        # publish options may be specified using PubSubOption
        self.dblPub = dblTopic.publish(ntcore.PubSubOptions(keepDuplicates=True))
        # publishEx provides additional options such as setting initial
        # properties and using a custom type string. Using a custom type string for
        # types other than raw and string is not recommended. The properties
        # must be a JSON map.
        self.dblPub = dblTopic.publishEx("double", {"myprop": 5})
    def periodic(self):
        # publish a default value
        self.dblPub.setDefault(0.0)
        # publish a value with current timestamp
        self.dblPub.set(1.0)
        self.dblPub.set(2.0, 0)  # 0 = use current time
        # publish a value with a specific timestamp with microsecond resolution.
        # On the roboRIO, this is the same as the FPGA timestamp (e.g.
        # RobotController.getFPGATime())
        self.dblPub.set(3.0, ntcore._now())
    # often not required in robot code, unless this class doesn't exist for
    # the lifetime of the entire robot program, in which case close() needs to be
    # called to stop publishing
    def close(self):
        # stop publishing
        self.dblPub.close()
```

--------------------------------

### Install RobotPy on Linux

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/zero-to-robot/step-2/python-setup.rst

Commands for checking pip version and installing or upgrading RobotPy on Linux systems.

```sh
python3 -m pip --version
```

```sh
python3 -m pip install robotpy
```

```sh
python3 -m pip install --upgrade robotpy
```

--------------------------------

### Initialize and Push a Git Repository

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/basic-programming/git-getting-started.rst

Commands to initialize a local directory as a Git repository and link it to a remote GitHub URL.

```console
> cd "C:\Users\ExampleUser9007\Documents\Example Folder"
> git init
Initialized empty Git repository in C:/Users/ExampleUser9007/Documents/Example Folder/.git/
> echo "# ExampleRepo" >> README.md
> git add README.md
> git commit -m "First commit"
[main (root-commit) fafafa] First commit
 1 file changed, 1 insertions(+), 0 deletions(-)
 create mode 100644 README.md
> git remote add origin https://github.com/ExampleUser9007/ExampleRepo.git
> git push -u origin main
```

```console
> cd "C:\Users\ExampleUser9007\Documents\Example Folder"
> git init
Initialized empty Git repository in C:/Users/ExampleUser9007/Documents/Example Folder/.git/
> git add .
> git commit -m "First commit"
[main (root-commit) fafafa] First commit
 1 file changed, 1 insertions(+), 0 deletions(-)
 create mode 100644 README.md
> git remote add origin https://github.com/ExampleUser9007/ExampleRepo.git
> git push -u origin main
```

--------------------------------

### Create LED Buffer Views

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/hardware-apis/misc/addressable-leds.rst

Demonstrates creating and reversing buffer views to manage specific segments of an LED strip.

```Java
// Create the buffer
AddressableLEDBuffer m_buffer = new AddressableLEDBuffer(120);

// Create the view for the section of the strip on the left side of the robot.
// This section spans LEDs from index 0 through index 59, inclusive.
AddressableLEDBufferView m_left = m_buffer.createView(0, 59);

// The section of the strip on the right side of the robot.
// This section spans LEDs from index 60 through index 119, inclusive.
// This view is reversed to cancel out the serpentine arrangement of the
// physical LED strip on the robot.
AddressableLEDBufferView m_right = m_buffer.createView(60, 119).reversed();
```

```C++
// Create the buffer
std::array<wpi::AddressableLED::LEDData, 120> m_buffer;

// Create the view for the section of the strip on the left side of the robot.
// This section spans LEDs from index 0 through index 59, inclusive.
std::view<wpi::AddressableLED::LEDData> m_left =
   std::ranges::take_view(m_buffer, 60);

// The section of the strip on the right side of the robot.
// This section spans LEDs from index 60 through index 119, inclusive.
// This view is reversed to cancel out the serpentine arrangement of the
// physical LED strip on the robot.
std::view<wpi::AddressableLED::LEDData> m_right = 
   std::ranges::reverse_view(
      std::ranges::drop_view(m_buffer, 60));
```

--------------------------------

### Using Entry to Both Subscribe and Publish in Python

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/networktables/publish-and-subscribe.rst

Demonstrates initializing an entry from a topic, performing read/write operations, and managing the lifecycle of the entry.

```python
class Example:
    def __init__(self, dblTopic: ntcore.DoubleTopic):
        # start subscribing; the return value must be retained.
        # the parameter is the default value if no value is available when get() is called
        self.dblEntry = dblTopic.get_entry(0.0)
        # publish and subscribe options may be specified using PubSubOption
        self.dblEntry = dblTopic.get_entry(
            0.0, ntcore.PubSubOptions(keepDuplicates=True, poll_storage=10)
        )
        # getEntryEx provides the options of using a custom type string.
        # Using a custom type string for types other than raw and string is not recommended.
        self.dblEntry = dblTopic.getEntryEx("double", 0.0)
    def periodic(self):
        # entries support all the same methods as subscribers:
        val = self.dblEntry.get()
        val = self.dblEntry.get(-1.0)
        val = self.dblEntry.getAsDouble()
        tsVal = self.dblEntry.getAtomic()
        tsUpdates = self.dblEntry.read_queue()
        # entries also support all the same methods as publishers; the first time
        # one of these is called, an internal publisher is automatically created
        self.dblEntry.setDefault(0.0)
        self.dblEntry.set(1.0)
        self.dblEntry.set(2.0, 0)  # 0 = use current time
        time = ntcore._now()
        self.dblEntry.set(3.0, time)
    def unpublish(self):
        # you can stop publishing while keeping the subscriber alive
        self.dblEntry.unpublish()
    # often not required in robot code, unless this class doesn't exist for
    # the lifetime of the entire robot program, in which case close() needs to be
    # called to stop subscribing
    def close(self):
        # stop subscribing/publishing
        self.dblEntry.close()
```

--------------------------------

### Install RobotPy on Linux ARM Coprocessor

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/zero-to-robot/step-2/python-setup.rst

Commands for installing RobotPy on ARM devices using prebuilt wheels or source compilation.

```sh
python3 -m pip install --extra-index-url=https://wpilib.jfrog.io/artifactory/api/pypi/wpilib-python-release-2025/simple robotpy
```

```sh
export CC=gcc-14 CXX=g++-14
```

--------------------------------

### Manual cscore Object Creation

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/vision-processing/introduction/cameraserver-class.rst

Demonstrates the manual creation and connection of UsbCamera, MjpegServer, CvSink, and CvSource objects, which CameraServer typically automates.

```java
import edu.wpi.cscore.CvSink;
import edu.wpi.cscore.CvSource;
import edu.wpi.cscore.MjpegServer;
import edu.wpi.cscore.UsbCamera;
// Creates UsbCamera and MjpegServer [1] and connects them
UsbCamera usbCamera = new UsbCamera("USB Camera 0", 0);
MjpegServer mjpegServer1 = new MjpegServer("serve_USB Camera 0", 1181);
mjpegServer1.setSource(usbCamera);
// Creates the CvSink and connects it to the UsbCamera
CvSink cvSink = new CvSink("opencv_USB Camera 0");
cvSink.setSource(usbCamera);
// Creates the CvSource and MjpegServer [2] and connects them
CvSource outputStream = new CvSource("Blur", PixelFormat.kMJPEG, 640, 480, 30);
MjpegServer mjpegServer2 = new MjpegServer("serve_Blur", 1182);
mjpegServer2.setSource(outputStream);
```

```c++
#include "wpi/cs/cscore_oo.hpp"
// Creates UsbCamera and MjpegServer [1] and connects them
wpi::cs::UsbCamera usbCamera("USB Camera 0", 0);
wpi::cs::MjpegServer mjpegServer1("serve_USB Camera 0", 1181);
mjpegServer1.SetSource(usbCamera);
// Creates the CvSink and connects it to the UsbCamera
wpi::cs::CvSink cvSink("opencv_USB Camera 0");
cvSink.SetSource(usbCamera);
// Creates the CvSource and MjpegServer [2] and connects them
wpi::cs::CvSource outputStream("Blur", wpi::cs::PixelFormat::kMJPEG, 640, 480, 30);
wpi::cs::MjpegServer mjpegServer2("serve_Blur", 1182);
mjpegServer2.SetSource(outputStream);
```

--------------------------------

### Configure DashboardCmdLine for WPILib Installer Dashboards

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/driverstation/manually-setting-the-driver-station-to-start-custom-dashboard.rst

Set the command line to execute a VBScript provided by the WPILib installation. Replace YYYY with the current year and specify the correct dashboard script.

```text
wscript C:\Users\Public\wpilib\YYYY\tools\DASHBOARD.vbs
```

```text
DashboardCmdLine = "wscript C:\Users\Public\wpilib\2025\tools\Elastic.vbs"
```

--------------------------------

### Get Encoder Period

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/hardware-apis/sensors/encoders-software.rst

Retrieve the period of the encoder pulses in seconds.

```java
    double period = encoder.getPeriod();
```

```cpp
  double period = encoder.GetPeriod();
```

--------------------------------

### Initialize CameraServer and Video Streams

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/vision-processing/introduction/cameraserver-class.rst

Configures automatic camera capture, creates a sink for OpenCV processing, and sets up an output stream for dashboard visualization.

```java
import edu.wpi.first.cameraserver.CameraServer;
import edu.wpi.cscore.CvSink;
import edu.wpi.cscore.CvSource;
// Creates UsbCamera and MjpegServer [1] and connects them
CameraServer.startAutomaticCapture();
// Creates the CvSink and connects it to the UsbCamera
CvSink cvSink = CameraServer.getVideo();
// Creates the CvSource and MjpegServer [2] and connects them
CvSource outputStream = CameraServer.putVideo("Blur", 640, 480);
```

```c++
#include "cameraserver/CameraServer.h"
// Creates UsbCamera and MjpegServer [1] and connects them
wpi::CameraServer::StartAutomaticCapture();
// Creates the CvSink and connects it to the UsbCamera
wpi::cs::CvSink cvSink = wpi::CameraServer::GetVideo();
// Creates the CvSource and MjpegServer [2] and connects them
wpi::cs::CvSource outputStream = wpi::CameraServer::PutVideo("Blur", 640, 480);
```

--------------------------------

### Get Encoder Direction

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/hardware-apis/sensors/encoders-software.rst

Retrieve the direction of the last encoder movement.

```java
    boolean direction = encoder.getDirection();
```

```cpp
  bool direction = encoder.GetDirection();
```

--------------------------------

### Get Encoder Distance

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/hardware-apis/sensors/encoders-software.rst

Retrieve the total distance traveled by the encoder.

```java
    double distance = encoder.getDistance();
```

```cpp
  double distance = encoder.GetDistance();
```

--------------------------------

### Apply Solid Color Pattern to LEDs

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/hardware-apis/misc/addressable-leds.rst

Demonstrates creating a solid color pattern and applying it to an LED buffer.

```Java
// Create an LED pattern that sets the entire strip to solid red
LEDPattern red = LEDPattern.solid(Color.kRed);

// Apply the LED pattern to the data buffer
red.applyTo(m_ledBuffer);

// Write the data to the LED strip
m_led.setData(m_ledBuffer);
```

```C++
// Create an LED pattern that sets the entire strip to solid red
LEDPattern red = LEDPattern.Solid(Color::kRed);

// Apply the LED pattern to the data buffer
red.ApplyTo(m_ledBuffer);

// Write the data to the LED strip
m_led.SetData(m_ledBuffer);
```

--------------------------------

### Creating CommandPtr instances in HatchbotInlined

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/commandbased/commands-v2/cpp-command-discussion.rst

Demonstrates using factory methods and decorators to construct command sequences in a C++ project.

```cpp
frc2::CommandPtr Autos::ExampleAuto() {
  return frc2::cmd::Sequence(
      frc2::cmd::Print("Starting auto"),
      frc2::cmd::RunOnce([&drive] { drive.ResetEncoders(); }, {&drive}),
      frc2::cmd::RunOnce([&drive] { drive.TankDriveVolts(10_V, 10_V); }, {&drive}),
      frc2::cmd::Wait(3_s),
      frc2::cmd::RunOnce([&drive] { drive.TankDriveVolts(0_V, 0_V); }, {&drive}),
      frc2::cmd::Print("Ending auto"));
}

frc2::CommandPtr Autos::ComplexAuto() {
  return frc2::cmd::Sequence(
      frc2::cmd::Print("Starting complex auto"),
      frc2::cmd::ParallelRaceGroup(
          frc2::cmd::RunOnce([&drive] { drive.TankDriveVolts(10_V, 10_V); }, {&drive}),
          frc2::cmd::Wait(3_s)),
      frc2::cmd::RunOnce([&drive] { drive.TankDriveVolts(0_V, 0_V); }, {&drive}),
      frc2::cmd::Print("Ending complex auto"));
}
```

--------------------------------

### Initialize DataLogManager

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/telemetry/datalog.rst

Starts the centralized data log, which automatically records NetworkTables changes.

```java
import edu.wpi.first.wpilibj.DataLogManager;
// Starts recording to data log
DataLogManager.start();
```

```c++
#include "wpi/system/DataLogManager.hpp"
// Starts recording to data log
wpi::DataLogManager::Start();
```

```python
from wpilib import DataLogManager
DataLogManager.start()
```

--------------------------------

### Create TrapezoidProfile States

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/advanced-controls/controllers/trapezoidal-profiles.rst

Define the starting and ending position and velocity states for the mechanism.

```java
// Creates a new state with a position of 5 meters
// and a velocity of 0 meters per second
new TrapezoidProfile.State(5, 0);
```

```cpp
// Creates a new state with a position of 5 meters
// and a velocity of 0 meters per second
wpi::math::TrapezoidProfile<units::meters>::State{5_m, 0_mps};
```

```python
from wpimath.trajectory import TrapezoidProfile
# Creates a new state with a position of 5 meters
# and a velocity of 0 meters per second
TrapezoidProfile.State(5, 0)
```

--------------------------------

### Create Flywheel State-Space System

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/advanced-controls/state-space/state-space-flywheel-walkthrough.rst

Examples for initializing a LinearSystem for a flywheel using identified kV and kA constants.

```java
var plant = LinearSystemId.identifyVelocitySystem(
    0.023,
    0.001);

var observer = new KalmanFilter<>(
    Nat.N1(),
    Nat.N1(),
    plant,
    VecBuilder.fill(3.0),
    VecBuilder.fill(0.01),
    0.020);

var controller = new LinearQuadraticRegulator<>(
    plant,
    VecBuilder.fill(8.0),
    VecBuilder.fill(12.0),
    0.020);
```

```c++
auto plant = frc::LinearSystemId::IdentifyVelocitySystem<1, 1>(0.023_V / 1_rad_per_s, 0.001_V / 1_rad_per_s_sq);
```

```c++
frc::LinearSystem<1, 1, 1> plant = frc::LinearSystemId::IdentifyVelocitySystem<1, 1>(0.023_V / 1_rad_per_s, 0.001_V / 1_rad_per_s_sq);

frc::KalmanFilter<1, 1, 1> observer{
    plant,
    {3.0},
    {0.01},
    20_ms};

frc::LinearQuadraticRegulator<1, 1> controller{
    plant,
    {8.0},
    {12.0},
    20_ms};
```

```python
self.plant = wpimath.system.identification.identifyVelocitySystem(
    0.023,
    0.001
)
```

```python
self.plant = wpimath.system.identification.identifyVelocitySystem(
    0.023,
    0.001
)

self.observer = wpimath.estimator.KalmanFilter(
    wpimath.Nat.N1(),
    wpimath.Nat.N1(),
    self.plant,
    [3.0],
    [0.01],
    0.020
)

self.controller = wpimath.controller.LinearQuadraticRegulator(
    self.plant,
    [8.0],
    [12.0],
    0.020
)
```

--------------------------------

### Implement a Default Drive Command

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/commandbased/commands-v2/commands.rst

Examples of a command that runs continuously and does not terminate, typically used as a default command.

```java
package frc.robot.commands;

import edu.wpi.first.wpilibj2.command.Command;
import frc.robot.subsystems.DriveSubsystem;
import java.util.function.DoubleSupplier;

public class DefaultDrive extends Command {
  private final DriveSubsystem m_drive;
  private final DoubleSupplier m_forward;
  private final DoubleSupplier m_rotation;

  public DefaultDrive(DriveSubsystem subsystem, DoubleSupplier forward, DoubleSupplier rotation) {
    m_drive = subsystem;
    m_forward = forward;
    m_rotation = rotation;
    addRequirements(m_drive);
  }

  @Override
  public void execute() {
    m_drive.arcadeDrive(m_forward.getAsDouble(), m_rotation.getAsDouble());
  }
}
```

```cpp
#pragma once

#include <frc2/command/Command.h>
#include <frc2/command/CommandHelper.h>

#include <functional>

#include "subsystems/DriveSubsystem.h"

class DefaultDrive : public frc2::CommandHelper<frc2::Command, DefaultDrive> {
 public:
  DefaultDrive(DriveSubsystem* subsystem, std::function<double()> forward,
               std::function<double()> rotation);

  void Execute() override;

 private:
  DriveSubsystem* m_drive;
  std::function<double()> m_forward;
  std::function<double()> m_rotation;
};
```

```cpp
#include "commands/DefaultDrive.hpp"

DefaultDrive::DefaultDrive(DriveSubsystem* subsystem,
                           std::function<double()> forward,
                           std::function<double()> rotation)
    : m_drive(subsystem), m_forward(forward), m_rotation(rotation) {
  AddRequirements(subsystem);
}

void DefaultDrive::Execute() {
  m_drive->ArcadeDrive(m_forward(), m_rotation());
}
```

```python
import commands2
import typing
from subsystems.drivesubsystem import DriveSubsystem

class DefaultDrive(commands2.Command):
    def __init__(
        self, 
        subsystem: DriveSubsystem, 
        forward: typing.Callable[[], float], 
        rotation: typing.Callable[[], float]
    ) -> None:
        super().__init__()
        self.drive = subsystem
        self.forward = forward
        self.rotation = rotation
        self.addRequirements(subsystem)

    def execute(self) -> None:
        self.drive.arcadeDrive(self.forward(), self.rotation())
```

--------------------------------

### RobotContainer Constructor Setup

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/commandbased/commands-v2/structuring-command-based-project.rst

The constructor initializes the robot state and triggers configuration methods.

```java
  public RobotContainer() {
    // Configure the trigger bindings
    configureBindings();
  }

  private void configureBindings() {
    // Schedule `ExampleCommand` when `exampleCondition` is true
    new Trigger(m_exampleSubsystem::exampleCondition)
        .onTrue(new ExampleCommand(m_exampleSubsystem));

    // Schedule `exampleMethodCommand` when the Xbox controller's B button is pressed,
    // cancelling on release.
    m_driverController.b().whileTrue(m_subsystem.exampleMethodCommand());
  }
```

```cpp
RobotContainer::RobotContainer() {
  ConfigureBindings();
}

void RobotContainer::ConfigureBindings() {}
```

--------------------------------

### Simulation Console Output

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/wpilib-tools/robot-simulation/introduction.rst

Example of console output when running simulation without the GUI.

```console
********** Robot program starting **********
Default disabledInit() method... Override me!
Default disabledPeriodic() method... Override me!
Default robotPeriodic() method... Override me!
```

--------------------------------

### Example Documentation Structure

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/contributing/wpilib-docs/style-guide.rst

Demonstrates the expected structure for ReST documentation files including code blocks.

```ReST
# Title
This is an example article
```java
System.out.println("Hello World");
```
## Section
This is a section!
```

--------------------------------

### Manage NetworkTables Instances

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/networktables/multiple-instances.rst

Demonstrates how to retrieve the default instance, create a new instance, and destroy an instance across different programming languages.

```java
// get the default NetworkTable instance
NetworkTableInstance defaultInst = NetworkTableInstance.getDefault();
// create a NetworkTable instance
NetworkTableInstance inst = NetworkTableInstance.create();
// destroy a NetworkTable instance
inst.close();
```

```cpp
// get the default NetworkTable instance
nt::NetworkTableInstance defaultInst = nt::NetworkTableInstance::GetDefault();
// create a NetworkTable instance
nt::NetworkTableInstance inst = nt::NetworkTableInstance::Create();
// destroy a NetworkTable instance; NetworkTableInstance objects are not RAII
nt::NetworkTableInstance::Destroy(inst);
```

```cpp
// get the default NetworkTable instance
NT_Instance defaultInst = nt::GetDefaultInstance();
// create a NetworkTable instance
NT_Instance inst = nt::CreateInstance();
// destroy a NetworkTable instance
nt::DestroyInstance(inst);
```

```c
// get the default NetworkTable instance
NT_Instance defaultInst = NT_GetDefaultInstance();
// create a NetworkTable instance
NT_Instance inst = NT_CreateInstance();
// destroy a NetworkTable instance
NT_DestroyInstance(inst);
```

```python
import ntcore
# get the default NetworkTable instance
defaultInst = ntcore.NetworkTableInstance.get_default()
# create a NetworkTable instance
inst = ntcore.NetworkTableInstance.create()
# destroy a NetworkTable instance
ntcore.NetworkTableInstance.destroy(inst)
```

--------------------------------

### Swap Initialization Script Content

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/basic-programming/java-gc.rst

The content required for the /etc/init.d/addswap.sh script to enable the swap file on boot.

```text
#!/bin/sh
[ -x /sbin/swapon ] && swapon -e /u/swapfile
: exit 0
```

--------------------------------

### Java Division by Zero Stack Trace

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/software/basic-programming/reading-stacktraces.rst

Example output showing a java.lang.ArithmeticException in the console.

```text
      ********** Robot program starting **********
Error at frc.robot.Robot.robotInit(Robot.java:24): Unhandled exception: java.lang.ArithmeticException: / by zero
        at frc.robot.Robot.robotInit(Robot.java:24)
        at edu.wpi.first.wpilibj.TimedRobot.startCompetition(TimedRobot.java:107)
        at edu.wpi.first.wpilibj.RobotBase.runRobot(RobotBase.java:373)
        at edu.wpi.first.wpilibj.RobotBase.startRobot(RobotBase.java:463)
        at frc.robot.Main.main(Main.java:23)
Warning at edu.wpi.first.wpilibj.RobotBase.runRobot(RobotBase.java:388): The robot program quit unexpectedly. This is usually due to a code error.
  The above stacktrace can help determine where the error occurred.
  See https://wpilib.org/stacktrace for more information.
Error at edu.wpi.first.wpilibj.RobotBase.runRobot(RobotBase.java:395): The startCompetition() method (or methods called by it) should have handled the exception above.
```

--------------------------------

### Initialize a new RobotPy project

Source: https://github.com/wpilibsuite/wpilib-docs/blob/main/source/docs/zero-to-robot/step-2/python-setup.rst

Creates a skeleton robot.py and pyproject.toml file in the current directory.

```sh
py -3 -m robotpy init
```

```sh
python3 -m robotpy init
```