JDS6600

https://github.com/wimdh/jds6600
Admin
A Python package for controlling the JDS6600 2-channel DDS signal generator with a built-in...
Tokens:983
Snippets:21
Trust Score:3.5
License:MIT
Update:3 months ago
Show doc for...
Tokens:
Raw
### Install JDS6600 Package

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Install the JDS6600 Python package using pip. The test extra installs dependencies for running tests.

```bash
pip install jds6600
pip install jds6600[test]
```

--------------------------------

### Get Frequency

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Retrieve the current frequency setting for a specified channel on the JDS6600 signal generator.

```python
fg.get_frequency(channel=1)
```

--------------------------------

### Get Offset

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Retrieve the current DC offset setting for a specified channel on the JDS6600 signal generator. Offset is typically in Volts.

```python
fg.get_offset(channel=1)
```

--------------------------------

### Get Current Channel Status

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Retrieve the current status (enabled/disabled) of both channels on the JDS6600 signal generator.

```python
fg.get_channels()
```

--------------------------------

### Get Duty Cycle

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Retrieve the current duty cycle setting for a specified channel on the JDS6600 signal generator. Duty cycle is expressed as a percentage.

```python
fg.get_dutycycle(channel=1)
```

--------------------------------

### Get Amplitude

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Retrieve the current amplitude setting for a specified channel on the JDS6600 signal generator. Amplitude is typically in Volts peak-to-peak.

```python
fg.get_amplitude(channel=2)
```

--------------------------------

### Get Waveform Type

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Retrieve the currently set waveform type for a specified channel on the JDS6600 signal generator.

```python
fg.get_waveform(channel=1)
```

--------------------------------

### Open and Connect to JDS6600

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Establish a connection to the JDS6600 signal generator using the specified USB port. Ensure your USB port is correctly identified.

```python
import jds6600
fg = jds6600.JDS6600(port="/dev/ttyUSB3")
fg.connect()
print(fg.get_channels())
fg.close()
```

--------------------------------

### Connect to JDS6600 using 'with' statement

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Connect to the JDS6600 signal generator using a 'with' statement for automatic connection and disconnection management. This ensures resources are properly released.

```python
import jds6600
with jds6600.JDS6600(port="/dev/ttyUSB3") as fg:
    print(fg.get_channels())
```

--------------------------------

### Set Channel Enable/Disable

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Enable or disable specific channels on the JDS6600 signal generator. Set channel1 and/or channel2 to True to enable, or False to disable.

```python
fg.set_channels(channel1=True, channel2=True)
```

--------------------------------

### Set Offset

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Set the DC offset for a specified channel on the JDS6600 signal generator. Ensure the value is within the device's supported range.

```python
fg.set_offset(channel=1, value=0.5)
```

--------------------------------

### Set Frequency

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Set the frequency for a specified channel on the JDS6600 signal generator. Frequency is specified in Hertz (Hz).

```python
fg.set_frequency(channel=1, value=1e3)
```

--------------------------------

### Set Duty Cycle

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Set the duty cycle for a specified channel on the JDS6600 signal generator. The value should be between 0 and 100 percent.

```python
fg.set_dutycycle(channel=1, value=20.1)
```

--------------------------------

### Set Amplitude

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Set the amplitude for a specified channel on the JDS6600 signal generator. Ensure the value is within the device's supported range.

```python
fg.set_amplitude(channel=1, value=1.23)
```

--------------------------------

### Set Waveform Type

Source: https://github.com/wimdh/jds6600/blob/main/README.md

Set the waveform type for a specified channel on the JDS6600 signal generator. Supported values include 'sine', 'triangle', etc.

```python
fg.set_waveform(channel=1, value='triangle')
```
Tokens:
Raw