Zabbix

https://www.zabbix.com/documentation/6.4/en/manual
Admin
Zabbix is an open-source enterprise-class software solution for real-time monitoring of IT...
Tokens:2,253,914
Snippets:31,689
Trust Score:10
Update:1 month ago
Show doc for...
Tokens:
Raw
### SLA Setup Example

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/sla

Provides a practical example of how to configure SLA monitoring in Zabbix.

```APIDOC
## SLA Setup Example

### Description
This section provides a step-by-step guide or a configuration example for setting up Service Level Agreement (SLA) monitoring.

### Example Configuration
(Details of the configuration would be provided here, such as:
- Defining SLA periods
- Linking SLAs to hosts or services
- Setting performance targets
- Configuring reporting)

### Usage
Once configured, Zabbix will track the availability and performance of monitored entities against the defined SLA targets, generating reports and alerts as needed.
```

--------------------------------

### VMware Monitoring Setup Example

Source: https://www.zabbix.com/documentation/6.4/en/manual/vm_monitoring/example

A practical example demonstrating how to set up VMware monitoring in Zabbix.

```APIDOC
## VMware Monitoring Setup Example

Walks through a typical setup for monitoring VMware vCenter and virtual machines.

### Description
This example covers the essential steps, including configuring the Zabbix agent, setting up VMware user accounts, and creating discovery rules.

### Steps
1. **Configure Zabbix Server/Proxy**: Ensure Zabbix can connect to your vCenter.
2. **Create VMware User**: Set up a read-only user in vCenter.
3. **Add VMware Template**: Link the appropriate VMware template to your Zabbix host representing vCenter.
4. **Configure Macros**: Set `{$VMWARE.USERNAME}` and `{$VMWARE.PASSWORD}` macros.
5. **Enable Discovery**: Verify low-level discovery rules are active.
```

--------------------------------

### SLA Setup Example

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/sla/get

This example demonstrates the steps to configure an SLA for a service, including defining success criteria and calculating SLA percentages.

```APIDOC
## SLA Setup Example

This section provides a practical example of how to set up Service Level Agreements (SLAs) in Zabbix.

### Description

This example demonstrates the steps to configure an SLA for a service, including defining success criteria and calculating SLA percentages.

### Setup Steps

1.  **Navigate to Services:** Go to Monitoring -> Services.
2.  **Create a Service:** Click on "Create service".
3.  **Configure Service Details:**
    *   **Service name:** e.g., "Web Service Availability"
    *   **Depends on:** Select the parent service if this is a dependent service.
    *   **Turns (problem/ok):** Define how the service status changes based on triggers.
4.  **Define SLA:**
    *   Go to the "SLA" tab.
    *   Click "Create SLA".
    *   **SLA name:** e.g., "99.9% Uptime"
    *   **Time (minutes):** Define the time period for SLA calculation (e.g., 30 days).
    *   **Success criteria:** Define the conditions that constitute a successful SLA. This is typically based on the availability of child services or specific triggers.
        *   Example: "Ensure that the "Web Service" is available for at least 99.9% of the time in the last 30 days."
    *   **Calculation method:** Choose how the SLA percentage is calculated.
5.  **Link Triggers/Services:** Associate the SLA with the relevant triggers or child services that define the service's availability.
6.  **Save the SLA.**

### Viewing SLA Report

After configuration, you can view the SLA report by navigating to Monitoring -> Services, selecting the service, and clicking on the "SLA" tab or by using the "SLA report" widget on a dashboard.
```

--------------------------------

### Host API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for creating, deleting, getting, and updating hosts, including mass operations.

```APIDOC
## Host API

### Description
Provides methods for managing hosts, including mass operations.

### Methods
- `host.create`
- `host.delete`
- `host.get`
- `host.massadd`
- `host.massremove`
- `host.massupdate`
- `host.update`
```

--------------------------------

### Compile and Install OpenSSL

Source: https://www.zabbix.com/documentation/6.4/en/manual/installation/install/win_agent

Compile, test, and install OpenSSL software components. Use 'nmake install' for software components only, or 'nmake install' for all components including documentation.

```bash
e:\openssl-1.1.1> nmake
e:\openssl-1.1.1> nmake test
... All tests successful.
Files=152, Tests=1152, 501 wallclock secs ( 0.67 usr +  0.61 sys =  1.28 CPU)
Result: PASS
e:\openssl-1.1.1> nmake install_sw
```

--------------------------------

### Settings API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for getting and updating system settings.

```APIDOC
## Settings API

### Description
Provides methods for retrieving and updating system settings.

### Methods
- `settings.get`
- `settings.update`
```

--------------------------------

### Proxy API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for creating, deleting, getting, and updating proxies.

```APIDOC
## Proxy API

### Description
Provides methods for managing proxies.

### Methods
- `proxy.create`
- `proxy.delete`
- `proxy.get`
- `proxy.update`
```

--------------------------------

### Token API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for creating, deleting, generating, getting, and updating tokens.

```APIDOC
## Token API

### Description
Provides methods for managing authentication tokens.

### Methods
- `token.create`
- `token.delete`
- `token.generate`
- `token.get`
- `token.update`
```

--------------------------------

### Examples of Running Zabbix Server with Parameters

Source: https://www.zabbix.com/documentation/6.4/en/manual/concepts/server

Demonstrates how to run the Zabbix server with specific command-line arguments, such as specifying a configuration file or requesting help.

```shell
shell> zabbix_server -c /usr/local/etc/zabbix_server.conf
shell> zabbix_server --help
shell> zabbix_server -V
```

--------------------------------

### System Hostname Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/itemtypes/zabbix_agent

Examples of retrieving system hostnames with different transformation options.

```text
system.hostname → linux-w7x1
system.hostname → example.com
system.hostname[shorthost] → example
```

--------------------------------

### Template API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for creating, deleting, getting, and updating templates, including mass operations.

```APIDOC
## Template API

### Description
Provides methods for managing templates, including mass operations.

### Methods
- `template.create`
- `template.delete`
- `template.get`
- `template.massadd`
- `template.massremove`
- `template.massupdate`
- `template.update`
```

--------------------------------

### MQTT URL Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/appendix/config/zabbix_agent2_plugins/mqtt_plugin

Examples of valid MQTT broker connection strings, demonstrating different schemes and port configurations.

```text
tcp://host:1883
localhost
ws://host:8080
```

--------------------------------

### CPU Load Monitoring Example

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/itemtypes/zabbix_agent

Example of retrieving the five-minute average CPU load.

```text
system.cpu.load[,avg5]
```

--------------------------------

### Start Zabbix Server using init.d script

Source: https://www.zabbix.com/documentation/6.4/en/manual/concepts/server

On systems where systemctl is not available, use this command to start the Zabbix server.

```shell
shell> /etc/init.d/zabbix-server start
```

--------------------------------

### Example Response for Service Get

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/service/get

This is an example of the JSON response structure when retrieving all services with their extended details and dependencies.

```json
{
    "jsonrpc": "2.0",
    "result": [
        {
            "serviceid": "1",
            "name": "My Service - 0001",
            "status": "-1",
            "algorithm": "2",
            "sortorder": "0",
            "weight": "0",
            "propagation_rule": "0",
            "propagation_value": "0",
            "description": "My Service Description 0001.",
            "uuid": "dfa4daeaea754e3a95c04d6029182681",
            "created_at": "946684800",
            "readonly": false,
            "parents": [],
            "children": []
        },
        {
            "serviceid": "2",
            "name": "My Service - 0002",
            "status": "-1",
            "algorithm": "2",
            "sortorder": "0",
            "weight": "0",
            "propagation_rule": "0",
            "propagation_value": "0",
            "description": "My Service Description 0002.",
            "uuid": "20ea0d85212841219130abeaca28c065",
            "created_at": "946684800",
            "readonly": false,
            "parents": [],
            "children": []
        }
    ],
    "id": 1
}
```

--------------------------------

### Example: Configuring an Action Log Widget

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/dashboard/widget_fields/action_log

This example demonstrates how to configure an Action Log widget using the `dashboard.create` method. It shows how to set the number of entries, sorting order, filter by recipient, media type, and status.

```APIDOC
## Example: Configuring an Action Log Widget

This example configures an _Action log_ widget to display 10 entries, sorted by time in ascending order. It filters for actions sent to user '1' via media type '1' that were unsuccessful (status 2).

### Request Example
```json
{
    "jsonrpc": "2.0",
    "method": "dashboard.create",
    "params": {
        "name": "My dashboard",
        "display_period": 30,
        "auto_start": 1,
        "pages": [
            {
                "widgets": [
                    {
                        "type": "actionlog",
                        "name": "Action log",
                        "x": 0,
                        "y": 0,
                        "width": 12,
                        "height": 5,
                        "view_mode": 0,
                        "fields": [
                            {
                                "type": 0,
                                "name": "show_lines",
                                "value": 10
                            },
                            {
                                "type": 0,
                                "name": "sort_triggers",
                                "value": 3
                            },
                            {
                                "type": 11,
                                "name": "userids",
                                "value": 1
                            },
                            {
                                "type": 13,
                                "name": "mediatypeids",
                                "value": 1
                            },
                            {
                                "type": 0,
                                "name": "statuses",
                                "value": 2
                            }
                        ]
                    }
                ]
            }
        ],
        "userGroups": [
            {
                "usrgrpid": 7,
                "permission": 2
            }
        ],
        "users": [
            {
                "userid": 1,
                "permission": 3
            }
        ]
    },
    "id": 1
}
```

### Response Example
```json
{
    "jsonrpc": "2.0",
    "result": {
        "dashboardids": [
            "3"
        ]
    },
    "id": 1
}
```
```

--------------------------------

### Install Zabbix Proxy (MySQL)

Source: https://www.zabbix.com/documentation/6.4/en/manual/installation/install_from_packages/rhel

Installs the Zabbix proxy package with MySQL support and the SQL scripts for database setup.

```bash
dnf install zabbix-proxy-mysql zabbix-sql-scripts
```

--------------------------------

### Start Zabbix Agent Manually

Source: https://www.zabbix.com/documentation/6.4/en/manual/installation/install_from_packages/mac_pkg

Run this command to manually start the Zabbix agent if it's not running automatically after installation or restart.

```bash
sudo launchctl start com.zabbix.zabbix_agentd

```

--------------------------------

### CPU Utilization Example

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/itemtypes/zabbix_agent

Example of retrieving the five-minute average user CPU utilization for the first CPU.

```text
system.cpu.util[0,user,avg5]
```

--------------------------------

### Pattern Matching Examples for vfs.file.contents

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/restrict_checks

These examples demonstrate various patterns used to match keys for `vfs.file.contents` with different parameter combinations. They illustrate how wildcards and specific parameter matching affect which keys are considered valid.

```text
_*_
```

```text
_vfs.file.contents_
```

```text
_vfs.file.contents[]_
```

```text
_vfs.file.contents[*]_
```

```text
vfs.file.contents[/path/to/file]
```

```text
_vfs.file.contents[/etc/passwd,*]_
```

```text
vfs.file.contents[/etc/passwd,utf8]
```

```text
vfs.file.contents[/var/log/zabbix_server.log]
```

```text
vfs.file.contents[]
```

```text
_vfs.file.contents[*passwd*]_
```

```text
vfs.file.contents[/etc/passwd, utf8]
```

```text
_vfs.file.contents[*passwd*,*]_
```

```text
vfs.file.contents[/tmp/test]
```

```text
_vfs.file.contents[/var/log/zabbix_server.log,*,abc]_
```

```text
vfs.file.contents[/var/log/zabbix_server.log,utf8,abc]
```

```text
_vfs.file.contents[/etc/passwd,utf8]_
```

```text
vfs.file.contents[/etc/passwd,utf16]
```

```text
_vfs.file.*_
```

```text
vfs.file.size
```

```text
vfs.file.size[/var/log/zabbix_server.log]
```

```text
_vfs.file.*[*]_
```

```text
vfs.file.size[/var/log/zabbix_server.log, utf8]
```

```text
_vfs.*.contents_
```

```text
vfs..contents
```

--------------------------------

### Start Zabbix Server using systemctl

Source: https://www.zabbix.com/documentation/6.4/en/manual/concepts/server

Use this command to start the Zabbix server process when installed as a package on most GNU/Linux systems.

```shell
shell> systemctl start zabbix-server
```

--------------------------------

### Install Zabbix Agent on macOS

Source: https://www.zabbix.com/documentation/6.4/en/manual/installation/install/mac_agent

This snippet outlines the commands to download, install, and start the Zabbix agent service on a macOS system.

```APIDOC
## Install Zabbix Agent on macOS

### Description
This section details the process of installing the Zabbix agent on macOS. It involves downloading the agent package, configuring it, and ensuring the service is running.

### Commands

1. **Download the Zabbix agent package:**
   Use `curl` to download the appropriate agent package for your macOS version.
   ```bash
   curl -L -O https://cdn.zabbix.com/zabbix/sources/stable/6.4/macos/zabbix-agent-6.4.x-macos-amd64.pkg
   ```
   *(Note: Replace `6.4.x` with the specific patch version if available.)*

2. **Install the package:**
   Run the installer package.
   ```bash
   sudo installer -pkg zabbix-agent-6.4.x-macos-amd64.pkg -target /
   ```

3. **Configure the agent:**
   Edit the Zabbix agent configuration file to specify the Zabbix server's IP address or DNS name and the agent's hostname.
   ```bash
   sudo nano /usr/local/etc/zabbix/zabbix_agentd.conf
   ```
   Ensure the following parameters are set correctly:
   - `Server=` (IP address or DNS name of your Zabbix server)
   - `ServerActive=` (IP address or DNS name of your Zabbix server for active checks)
   - `Hostname=` (Unique hostname for this agent, matching the host in Zabbix)

4. **Start the Zabbix agent service:**
   Use `launchctl` to load and start the Zabbix agent service.
   ```bash
   sudo launchctl load -w /Library/LaunchDaemons/com.zabbix.zabbix_agentd.plist
   ```

5. **Verify the agent status:**
   Check if the agent is running.
   ```bash
   sudo launchctl list | grep zabbix_agentd
   ```
   You should see an entry for `com.zabbix.zabbix_agentd`.

### Notes
- Ensure you have `sudo` privileges to perform these operations.
- The exact package name might vary based on the Zabbix version and architecture.
```

--------------------------------

### Get Day of Month

Source: https://www.zabbix.com/documentation/6.4/en/manual/appendix/functions/time

Use the 'dayofmonth' function to get the current day of the month. This example checks if it is the 1st day of the month.

```zabbix-expression
dayofmonth()=1
```

--------------------------------

### Start Zabbix Containers (MySQL Latest)

Source: https://www.zabbix.com/documentation/6.4/en/manual/installation/containers

Start Zabbix 6.4 components using a pre-built Alpine Linux image with MySQL support. Ensure to download the corresponding .env file.

```bash
# git checkout 6.4
# docker compose -f ./docker-compose_v3_alpine_mysql_latest.yaml up -d
```

--------------------------------

### Install Nginx

Source: https://www.zabbix.com/documentation/6.4/en/manual/appendix/install/nginx

This section details the steps to install Nginx.

```APIDOC
## Install Nginx

### Description
This section details the steps to install Nginx.

### Method
Not applicable (installation instructions)

### Endpoint
Not applicable (installation instructions)

### Parameters
Not applicable (installation instructions)

### Request Example
Not applicable (installation instructions)

### Response
Not applicable (installation instructions)
```

--------------------------------

### User API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for checking authentication, creating, deleting, getting, logging in, logging out, provisioning, unblocking, and updating users.

```APIDOC
## User API

### Description
Provides methods for managing users and authentication.

### Methods
- `user.checkAuthentication`
- `user.create`
- `user.delete`
- `user.get`
- `user.login`
- `user.logout`
- `user.provision`
- `user.unblock`
- `user.update`
```

--------------------------------

### Example: Configuring a Graph (classic) Widget

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/dashboard/widget_fields/graph_classic

Demonstrates how to configure a _Graph (classic)_ widget to display a simple graph for a specific item using the `dashboard.create` method.

```APIDOC
## dashboard.create - Graph (classic) Widget Example

### Description
This example shows how to configure a _Graph (classic)_ widget to display a simple graph for item ID "42269" within a new dashboard.

### Method
`dashboard.create`

### Request Example
```json
{
    "jsonrpc": "2.0",
    "method": "dashboard.create",
    "params": {
        "name": "My dashboard",
        "display_period": 30,
        "auto_start": 1,
        "pages": [
            {
                "widgets": [
                    {
                        "type": "graph",
                        "name": "Graph (classic)",
                        "x": 0,
                        "y": 0,
                        "width": 12,
                        "height": 5,
                        "view_mode": 0,
                        "fields": [
                            {
                                "type": 0,
                                "name": "source_type",
                                "value": 1
                            },
                            {
                                "type": 4,
                                "name": "itemid",
                                "value": 42269
                            }
                        ]
                    }
                ]
            }
        ],
        "userGroups": [
            {
                "usrgrpid": 7,
                "permission": 2
            }
        ],
        "users": [
            {
                "userid": 1,
                "permission": 3
            }
        ]
    },
    "id": 1
}
```

### Response Example
```json
{
    "jsonrpc": "2.0",
    "result": {
        "dashboardids": [
            "3"
        ]
    },
    "id": 1
}
```
```

--------------------------------

### Template Group API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for creating, deleting, getting, and updating template groups, including mass operations and propagation.

```APIDOC
## Template Group API

### Description
Provides methods for managing template groups, including mass operations and propagation.

### Methods
- `templategroup.create`
- `templategroup.delete`
- `templategroup.get`
- `templategroup.massadd`
- `templategroup.massremove`
- `templategroup.massupdate`
- `templategroup.propagate`
- `templategroup.update`
```

--------------------------------

### Script API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for creating, deleting, executing, getting scripts, and retrieving scripts by events or hosts, and updating scripts.

```APIDOC
## Script API

### Description
Provides methods for managing and executing scripts.

### Methods
- `script.create`
- `script.delete`
- `script.execute`
- `script.get`
- `script.getscriptsbyevents`
- `script.getscriptsbyhosts`
- `script.update`
```

--------------------------------

### Create a Host Prototype

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/hostprototype/create

This example demonstrates how to create a host prototype with a specific name, linked to an LLD rule, assigned to a group prototype, tagged, and configured with a custom SNMPv2 interface. It also shows how to link it to an existing host group.

```json
{
    "jsonrpc": "2.0",
    "method": "hostprototype.create",
    "params": {
        "host": "{#VM.NAME}",
        "ruleid": "23542",
        "custom_interfaces": "1",
        "groupLinks": [
            {
                "groupid": "2"
            }
        ],
        "groupPrototypes": [
            {
                "name": "{#HV.NAME}"
            }
        ],
        "tags": [
            {
                "tag": "Datacenter",
                "value": "{#DATACENTER.NAME}"
            }
        ],
        "interfaces": [
            {
                "main": "1",
                "type": "2",
                "useip": "1",
                "ip": "127.0.0.1",
                "dns": "",
                "port": "161",
                "details": {
                    "version": "2",
                    "bulk": "1",
                    "community": "{$SNMP_COMMUNITY}"
                }
            }
        ]
    },
    "id": 1
}
```

```json
{
    "jsonrpc": "2.0",
    "result": {
        "hostids": [
            "10103"
        ]
    },
    "id": 1
}
```

--------------------------------

### Host Group API Examples

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/preprocessing/examples

Examples for creating, deleting, getting, and updating host groups, including mass operations and propagation.

```APIDOC
## Host Group API

### Description
Provides methods for managing host groups, including mass operations and propagation.

### Methods
- `hostgroup.create`
- `hostgroup.delete`
- `hostgroup.get`
- `hostgroup.massadd`
- `hostgroup.massremove`
- `hostgroup.massupdate`
- `hostgroup.propagate`
- `hostgroup.update`
```

--------------------------------

### Create a user directory with JIT provisioning

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/userdirectory/create

This snippet demonstrates creating a user directory with Just-In-Time (JIT) provisioning enabled for LDAP authentication. Configure user and group mapping as needed.

```json
{
    "jsonrpc": "2.0",
    "method": "userdirectory.create",
    "params": {
            "idp_type": "1",
            "name": "AD server",
            "provision_status": "1",
            "description": "",
            "host": "host.example.com",
            "port": "389",
            "base_dn": "DC=zbx,DC=local",
            "search_attribute": "sAMAccountName",
            "bind_dn": "CN=Admin,OU=Users,OU=Zabbix,DC=zbx,DC=local",
            "start_tls": "0",
            "search_filter": "",
            "group_basedn": "OU=Zabbix,DC=zbx,DC=local",
            "group_name": "CN",
            "group_member": "member",
            "group_filter": "(%{groupattr}=CN=%{ref},OU=Users,OU=Zabbix,DC=zbx,DC=local)",
            "group_membership": "",
            "user_username": "givenName",
            "user_lastname": "sn",
            "user_ref_attr": "CN",
            "provision_media": [
                {
                    "name": "example.com",
                    "mediatypeid": "1",
                    "attribute": "user@example.com"
                }
            ],
            "provision_groups": [
                {
                    "name": "*",
                    "roleid": "4",
                    "user_groups": [
                        {
                            "usrgrpid": "8"
                        }
                    ]
                },
                {
                    "name": "Zabbix administrators",
                    "roleid": "2",
                    "user_groups": [
                        {
                            "usrgrpid": "7"
                        },
                        {
                            "usrgrpid": "8"
                        }
                    ]
                }
            ]
        },
    "id": 1
}
```

```json
{
    "jsonrpc": "2.0",
    "result": {
        "userdirectoryids": [
            "2"
        ]
    },
    "id": 1
}
```

--------------------------------

### Run Zabbix Web Service

Source: https://www.zabbix.com/documentation/6.4/en/manual/appendix/install/web_service

Start the Zabbix web service process after installation. This command is run on the machine where the web service is installed.

```shell
zabbix_web_service
```

--------------------------------

### Item Get Response Example

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/item/get

Example response structure for item.get when retrieving dependent items. This shows the detailed properties of the found items.

```json
{
    "jsonrpc": "2.0",
    "result": [
        {
            "itemid": "25550",
            "type": "18",
            "snmp_oid": "",
            "hostid": "10116",
            "name": "Days",
            "key_": "apache.status.uptime.days",
            "delay": "0",
            "history": "90d",
            "trends": "365d",
            "status": "0",
            "value_type": "3",
            "trapper_hosts": "",
            "units": "",
            "logtimefmt": "",
            "templateid": "0",
            "valuemapid": "0",
            "params": "",
            "ipmi_sensor": "",
            "authtype": "0",
            "username": "",
            "password": "",
            "publickey": "",
            "privatekey": "",
            "flags": "0",
            "interfaceid": "0",
            "description": "",
            "inventory_link": "0",
            "evaltype": "0",
            "jmx_endpoint": "",
            "master_itemid": "25545",
            "timeout": "3s",
            "url": "",
            "query_fields": [],
            "posts": "",
            "status_codes": "200",
            "follow_redirects": "1",
            "post_type": "0",
            "http_proxy": "",
            "headers": [],
            "retrieve_mode": "0",
            "request_method": "0",
            "output_format": "0",
            "ssl_cert_file": "",
            "ssl_key_file": "",
            "ssl_key_password": "",
            "verify_peer": "0",
            "verify_host": "0",
            "allow_traps": "0",
            "uuid": "",
            "state": "0",
            "error": "",
            "parameters": [],
            "lastclock": "0",
            "lastns": "0",
            "lastvalue": "0",
            "prevvalue": "0"
        },
        {
            "itemid": "25555",
            "type": "18",
            "snmp_oid": "",
            "hostid": "10116",
            "name": "Hours",
            "key_": "apache.status.uptime.hours",
            "delay": "0",
            "history": "90d",
            "trends": "365d",
            "status": "0",
            "value_type": "3",
            "trapper_hosts": "",
            "units": "",
            "logtimefmt": "",
            "templateid": "0",
            "valuemapid": "0",
            "params": "",
            "ipmi_sensor": "",
            "authtype": "0",
            "username": "",
            "password": "",
            "publickey": "",
            "privatekey": "",
            "flags": "0",
            "interfaceid": "0",
            "description": "",
            "inventory_link": "0",
            "evaltype": "0",
            "jmx_endpoint": "",
            "master_itemid": "25545",
            "timeout": "3s",
            "url": "",
            "query_fields": [],
            "posts": "",
            "status_codes": "200",
            "follow_redirects": "1",
            "post_type": "0",
            "http_proxy": "",
            "headers": [],
            "retrieve_mode": "0",
            "request_method": "0",
            "output_format": "0",
            "ssl_cert_file": "",
            "ssl_key_file": "",
            "ssl_key_password": "",
            "verify_peer": "0",
            "verify_host": "0",
            "allow_traps": "0",
            "uuid": "",
            "state": "0",
            "error": "",
            "parameters": [],
            "lastclock": "0",
            "lastns": "0",
            "lastvalue": "0",
            "prevvalue": "0"
        }
    ],
    "id": 1
}
```

--------------------------------

### Retrieve OS process information with proc.get

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/itemtypes/zabbix_agent

Use these examples to list processes, threads, or summary data for specific users or process names.

```text
proc.get[zabbix_server,zabbix,,process] #list of all zabbix_server processes running under the zabbix user, returns one entry per PID
proc.get[java,,,thread] #list of all Java processes, returns one entry per thread
proc.get[,zabbix,,summary] #combined data for processes of each type running under the zabbix user, returns one entry per process name
```

--------------------------------

### db.odbc.get Example for MySQL

Source: https://www.zabbix.com/documentation/6.4/en/manual/config/items/itemtypes/odbc_checks

Example of using the `db.odbc.get` item key with a connection string for the MySQL ODBC driver.

```text
db.odbc.get[MySQL example,,"Driver=/usr/local/lib/libmyodbc5a.so;Database=master;Server=127.0.0.1;Port=3306"]
```

--------------------------------

### Example: Force Active Checks on Start

Source: https://www.zabbix.com/documentation/6.4/en/manual/extensions/plugins

Example of setting a plugin-specific parameter to force active checks immediately after agent restart for the Uptime plugin.

```text
Plugins.Uptime.System.ForceActiveChecksOnStart=1
```

--------------------------------

### Install a module

Source: https://www.zabbix.com/documentation/6.4/en/manual/api/reference/module/create

Use this snippet to install a module with the status 'Enabled'. Ensure module files are unpacked in the correct subdirectories.

```json
{
    "jsonrpc": "2.0",
    "method": "module.create",
    "params": {
        "id": "example_module",
        "relative_path": "modules/example_module",
        "status": 1
    },
    "id": 1
}
```

```json
{
    "jsonrpc": "2.0",
    "result": {
        "moduleids": [
            "25"
        ]
    },
    "id": 1
}
```

--------------------------------

### Start Request Example

Source: https://www.zabbix.com/documentation/6.4/en/manual/appendix/protocols/zabbix_agent2_plugin

This request is sent by the agent to initiate the Start function of a plugin's Runner interface. It only contains common data parameters.

```json
{"id":3,"type":4}
```

--------------------------------

### Install Java Gateway

Source: https://www.zabbix.com/documentation/6.4/en/manual/installation/install

Install the Java gateway. Ensure you have sufficient privileges.

```shell
$ make install
```

--------------------------------

### Start Zabbix Agent on Linux

Source: https://www.zabbix.com/documentation/6.4/en/manual/concepts/agent

Use systemctl to start the Zabbix agent daemon on most GNU/Linux systems. Ensure the agent is installed via package manager.

```shell
shell> systemctl start zabbix-agent
```

--------------------------------

### Build Plugin

Source: https://www.zabbix.com/documentation/6.4/en/manual/extensions/plugins/build

Execute the 'make' command to compile the loadable plugin binary.

```bash
make
```

--------------------------------

### Start Zabbix Agent in Podman Pod

Source: https://www.zabbix.com/documentation/6.4/en/manual/installation/containers

Starts a Zabbix agent container within the 'zabbix' Podman pod. This example assumes a local Zabbix server.

```bash
podman run --name zabbix-agent \
    -e ZBX_SERVER_HOST="127.0.0.1,localhost" \
    --restart=always \
    --pod=zabbix \
    -d registry.connect.redhat.com/zabbix/zabbix-agent-64:latest
```

--------------------------------

### Enter Plugin Directory

Source: https://www.zabbix.com/documentation/6.4/en/manual/extensions/plugins/build

Navigate into the extracted directory of the plugin sources to proceed with the build.

```bash
cd <path to directory>
```
Tokens:
Raw