DXSpider

https://wiki.dxcluster.org
Admin
DXSpider is an open-source amateur radio packet cluster program designed to receive, process, and...
Tokens:197,906
Snippets:1,864
Trust Score:7.7
Update:1 day ago
Show doc for...
Tokens:
Raw
### Start connection with connect command

Source: https://wiki.dxcluster.org/wiki/Configuration

Example of starting a connection by typing 'connect' followed by a script name at the cluster prompt. The output shows the connection being started.

```text
G0VGS de GB7MBC 13-Dec-1998 2041Z >connect gb7djk-1
connection to GB7DJK-1 started
G0VGS de GB7MBC 13-Dec-1998 2043Z >
```

--------------------------------

### startup script example

Source: https://wiki.dxcluster.org/wiki/Scripts

Example startup script for DXSpider. It sets maximum spots, rejects node adverts and D0/D1 prefixes, sets spider connections, makes instant connections, requires registration, optionally requires passwords, sets external IP, and sets local hostnames. Lines starting with # are ignored.

```plaintext
#
# 
# lines starting with a # are ignored
#
# set maximum no of spots allowed to 100
set/var $Spot::maxspots = 100
#
# reject node adverts
rej/ann node_default input info telnet,cluster,7000,7300,7373,8000,8888,9000,17300
#
# reject D0 and D1 prefixes which aren't on the ITU list
rej/spot node_default input 2 call d0,d1
rej/spot node_default input 3 by d0,d1
#
# set outbound spider connections with nodes you've paired with
set/spider g1abc-2
set/spider gb7abc-1
#
# make instant connections to nodes
connect g1abc-2
connect gb7abc-1
#
# make people register before they can send spots
# 1 is on, 0 is off
set/var $main::reqreg = 1
#
# make people use a password to login
# 1 is on, 0 is off
set/var $main::passwdreq = 0
#
# set the node's external dynamic IP
set/external_ip
#
# set the node and logging pc IPv4s
# gather ip address from your network and add them at the end using ,'192.168.1.144' for example
set/var @main::localhost_names ('127.0.0.1', '::1', '192.168.1.123','192.168.1.134')
#
#EOF
```

--------------------------------

### Install nano editor

Source: https://wiki.dxcluster.org/wiki/Centos6

Run as root to install nano, recommended for beginners.

```bash
# yum install nano
```

--------------------------------

### set/qth example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example of setting a QTH location.

```plaintext
 SET/QTH East Dereham, Norfolk
```

--------------------------------

### SH/MUF W 24 command example

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Shows the command to get 24 hours of propagation data for prefix W.

```text
SH/MUF W 24
```

--------------------------------

### Example output of show/files

Source: https://wiki.dxcluster.org/wiki/Information,_files_and_useful_programs

Example output showing a directory and a file with sizes and timestamps.

```text
sh/files
bulletin      DIR 20-Dec-1999 1715Z news          1602 14-Dec-1999 1330Z
```

--------------------------------

### SYSOP password challenge example

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Shows the password string and the sysop command output with five indexes. The indexes start from zero and are used to select characters from the password.

```text
password = 012345678901234567890123456789
> sysop
22 10 15 17 3
```

--------------------------------

### SHOW/DXQSL example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example of the SHOW/DXQSL command to display QSL manager information gathered from spot comments.

```text
 sh/dxqsl 4k9w
```

--------------------------------

### Start dxspider.service

Source: https://wiki.dxcluster.org/wiki/Auto-start

Starts the dxspider service. Run as root.

```bash
# systemctl start dxspider.service
```

--------------------------------

### set/qra example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example of setting a QRA grid locator.

```plaintext
 SET/QRA JO02LQ
```

--------------------------------

### SHOW/DXQSL example

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Example of the SHOW/DXQSL command to query the QSL manager database for a callsign.

```text
sh/dxqsl 4k9w
```

--------------------------------

### Install emacs editor

Source: https://wiki.dxcluster.org/wiki/Centos6

Run as root to install emacs.

```bash
# yum install emacs
```

--------------------------------

### set/baddx example

Source: https://wiki.dxcluster.org/wiki/Other_filters

Example command to stop bad DX spots.

```text
set/baddx video wsjt
```

--------------------------------

### Start NTP service

Source: https://wiki.dxcluster.org/wiki/Centos6

Start the NTP service.

```bash
# service ntpd start
```

--------------------------------

### Install package foo with yum

Source: https://wiki.dxcluster.org/wiki/Centos6

Run as root to install a package named 'foo'.

```bash
# yum install foo
```

--------------------------------

### DX command example

Source: https://wiki.dxcluster.org/wiki/Getting_and_posting_DX

Example of posting DX with frequency, callsign, and remarks.

```plaintext
dx 14004 pa3ezl OP Aurelio 599
```

--------------------------------

### accept/wcy sysop version example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example of setting a WCY filter for a callsign and setting hops for node_default.

```text
 accept/wcy node_default all  set/hops node_default 10
```

--------------------------------

### Install EPEL repository

Source: https://wiki.dxcluster.org/wiki/Centos6

Run as root to install the EPEL repository, required for perl-Curses.

```bash
# rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-5.noarch.rpm
```

--------------------------------

### Install vim editor

Source: https://wiki.dxcluster.org/wiki/Centos6

Run as root to install vim, which extends the basic vi editor features.

```bash
# yum install vim
```

--------------------------------

### Start AX.25 daemons

Source: https://wiki.dxcluster.org/wiki/Setting_up_the_AX25_Utilities

Start the daemons that set everything in motion: ax25d and netromd with the -i flag.

```bash
ax25d
netromd -i
```

--------------------------------

### reject/spots all example

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Example using the 'all' tag to reject all spots. Noted as probably for advanced users.

```text
rej/spot 3 all
```

--------------------------------

### SHOW/MYDX example with ACC/SPOT

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example of setting a spot filter to only show HF spots, which affects SHOW/MYDX.

```plaintext
ACC/SPOT on hf
```

--------------------------------

### SHOW/HFTABLE: Specify start date in various formats

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Add a date in a recognizable form to start from a different day. The examples show several accepted date formats.

```text
sh/hftable 2 25nov02
```

```text
sh/hftable 2 25-nov-02
```

```text
sh/hftable 2 021125
```

```text
sh/hftable 2 25/11/02
```

--------------------------------

### Change to /spider directory

Source: https://wiki.dxcluster.org/wiki/Ubuntu_24.04

Navigate to the DxSpider installation directory before running setup scripts.

```bash
$ cd /spider
```

--------------------------------

### DBCREATE command-based pseudo-database example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Makes a local command 'show/dxqsl' available as a pseudo-database named 'dxqsl'. Useful for remote access from legacy nodes.

```text
 DBCREATE dxqsl cmd show/dxqsl
```

--------------------------------

### Download WinCVS from SourceForge

Source: https://wiki.dxcluster.org/wiki/CVS

URL to download the WinCVS 1.2 stable version. Use this link to get the software before installation.

```text
http://prdownloads.sourceforge.net/cvsgui/WinCvs120.zip
```

--------------------------------

### SYSOP password challenge example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Shows the system response to the SYSOP command, returning five indexes into the password string. The indexes start from zero.

```text
 password = 012345678901234567890123456789  > sysop  22 10 15 17 3
```

--------------------------------

### demonstrate command examples

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Shows how to use the demonstrate command to run a command as another user and send the output to that user. Similar to SPOOF with same side effects; commands run at the privilege of the target user.

```plaintext
 DEMO g7brn sh/dx iota oc209 
 DEMO g1tlh set/here
```

--------------------------------

### SH/C with node or prefix - Show users for a node

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Supply a node or part of a prefix to get a list of users for that node or list of nodes starting with that prefix.

```plaintext
SH/C GB7DJK
SH/C SK
```

--------------------------------

### show/startup

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Views your own startup script created with SET/STARTUP.

```APIDOC
## show/startup

### Description
Views your own startup script created with SET/STARTUP.

### Method
CLI Command

### Endpoint
show/startup

### Parameters
None

### Response
Displays the contents of your startup script.
```

--------------------------------

### Console output during connection

Source: https://wiki.dxcluster.org/wiki/Configuration

Example of the console output when following a connection from the terminal where cluster.pl was started. From version 1.47 onwards, set/debug connect must be enabled first.

```text
<- D G1TLH connect gb7djk-1
-> D G1TLH connection to GB7DJK-1 started
-> D G1TLH G1TLH de GB7DJK 13-Dec-1998 2046Z >
timeout set to 15
CONNECT sort: telnet command: dirkl.tobit.co.uk
CHAT "login" -> "gb7djk"
received "
Red Hat Linux release 5.1 (Manhattan)
Kernel 2.0.35 on an i586
"
received "login: "
sent "gb7djk"
CHAT "word" -> "gb7djk"
received "gb7djk"
received "Password: "
sent "gb7djk"
Connected to GB7DJK-1, starting normal protocol
<- O GB7DJK-1 telnet
-> B GB7DJK-1 0
GB7DJK-1 channel func  state 0 -> init
<- D GB7DJK-1
<- D GB7DJK-1 Last login: Sun Dec 13 17:59:56 from dirk1
<- D GB7DJK-1 PC38^GB7DJK-1^~
<- D GB7DJK-1 PC18^ 1 nodes, 0 local / 1 total users  Max users 0  Uptime
0 00:00^5447^~
    etc
```

--------------------------------

### SHOW/DX example commands

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Example invocations of SHOW/DX with various filters: prefix, band, info, QSL, IOTA, QRA, DXCC, zone, state, and their by_ variants.

```text
SH/DX 9m0
SH/DX on 20m info iota
SH/DX 9a on vhf day 30
SH/DX rf1p qsl
SH/DX iota
SH/DX iota eu-064
SH/DX qra jn86
SH/DX dxcc oq2
SH/DX dxcc oq2 by w dxcc
SH/DX zone 4,5,6
SH/DX by_zone 4,5,6
SH/DX state in,oh
SH/DX by_state in,oh
```

--------------------------------

### show/startup <call>

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Views a user's startup script.

```APIDOC
## show/startup <call>

### Description
Views a user's startup script.

### Method
CLI Command

### Endpoint
show/startup <call>

### Parameters
#### Path Parameters
- **call** (string) - Required - Callsign of the user whose startup script to view

### Response
Displays the startup script for the specified user.
```

--------------------------------

### SHOW/CONFIGURATION command examples

Source: https://wiki.dxcluster.org/wiki/Nodes_and_users

Four variations of the SHOW/CONFIGURATION command: show all nodes with users, show only nodes, show a specific node by call, and show nodes by prefix. The first example shows all nodes and their users, the second shows only nodes, the third requires a node call, and the fourth uses a prefix to filter nodes.

```plaintext
show/configuration
show/configuration nodes
show/configuration (node_call)
show/configuration (prefix)
```

--------------------------------

### SH/MUF long path command examples

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Two equivalent commands to get long path propagation estimates for prefix W over 24 hours. The documentation notes the figures may not be very useful or accurate.

```text
SH/MUF W L 24
```

```text
SH/MUF W 24 Long
```

--------------------------------

### show/vhftable with date formats

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Shows the VHF DX Spotter table starting from a specific date. The date can be given in various recognizable formats, as shown in these examples. This is useful for viewing stats for a particular contest weekend.

```plaintext
 sh/vhftable 2 25nov02
```

```plaintext
 sh/vhftable 2 25-nov-02
```

```plaintext
 sh/vhftable 2 021125
```

```plaintext
 sh/vhftable 2 25/11/02
```

--------------------------------

### SHOW/STARTUP

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Views the contents of a startup script created with SET/STARTUP.

```APIDOC
## SHOW/STARTUP

### Description
Displays the contents of the startup script created with SET/STARTUP.

### Syntax
`SHOW/STARTUP`

### Parameters
None.
```

--------------------------------

### SHOW/CONFIGURATION: Display specific node or prefix (SH/C GB7DJK, SH/C SK)

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Use SH/C with a node callsign or prefix to display users for that node or nodes starting with that prefix. Examples show querying for GB7DJK and SK.

```plaintext
 SH/C GB7DJK
 SH/C SK

```

--------------------------------

### Output of 'show/configuration' (all nodes)

Source: https://wiki.dxcluster.org/wiki/Nodes_and_users

Example output from the first command 'show/configuration', showing a list of nodes and their connected users. Nodes with parentheses indicate limited protocol, showing only user count.

```plaintext
sh/c
Node         Callsigns
EI5TCR       (7 users)
GB7ADX
GB7BAA       G4FPV        G8TIC
GB7BIG       (GD0TEP)     GD3UMW
GB7BPQ       (G0INA)      G0RCI        G3AKU        G3OCA
(GB7CDX)     G3JNB        G4ALR
GB7DJK       G0FYD        G0REK        G1TLH        G4PEL        G4SOZ
             G4TVR        G7SQW        K8AZ         M0CTQ-1      MM1CXE-10
             ON7WP
GB7DXA       G0RDI        G8SJP
GB7DXC       (G0HDB)      G0WFK        (G1FYC)      G3KWK        G3LME
             G3OIL        G4BGW        G4FUJ        (G4PDQ)      GW7SMV
GB7DXE       G1NNB
(GB7DXG)     GU6EFB       GU7DHI
GB7DXK       G1NTW        G3IBI        G3NSM        G3XAQ        G4CUS
             G4XQY        G7GAN
GB7DXM       G1EUC        G3GAF        G3LAS        G4ZTR        G8WXU
             M0BCT        M1EMF
```

--------------------------------

### show/satellite: Show tracking data

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Use SH/SAT with a satellite name to get tracking data for passes that start and finish 5 degrees below the horizon. Default is next three hours in five-minute intervals. You can specify hours and interval. Without a name, lists all known satellites.

```plaintext
 SH/SAT AO-10
 SH/SAT FENGYUN1 12 2
```

--------------------------------

### DBAVAIL command example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Shows how to list all databases defined in the system. The command is aliased to SHOW/COMMAND.

```text
 DBAVAIL (or it will have been aliased to SHOW/COMMAND)
```

--------------------------------

### Install cpanminus via curl

Source: https://wiki.dxcluster.org/wiki/UPDATE.mojo

Alternative method to install cpanminus using curl. First installs curl with apt, then fetches and runs the installer script.

```bash
sudo apt-get install curl
curl -L https://cpanmin.us | perl - --sudo App::cpanminus
```

--------------------------------

### Install AX.25 RPMs (libax25, ax25-tools, ax25-apps)

Source: https://wiki.dxcluster.org/wiki/Setting_up_the_AX25_Utilities

Install the required RPM packages in order: libax25, then ax25-tools, then ax25-apps. Use the exact filenames shown.

```bash
      rpm -ivh libax25-0.0.7-7.i386.rpm
      rpm -ivh ax25-tool-0.0.6-13.i386.rpm
      rpm -ivh ax25-apps-0.0.4-9.i386.rpm
```

--------------------------------

### Install cpanminus via wget

Source: https://wiki.dxcluster.org/wiki/UPDATE.mojo

Alternative method to install cpanminus using wget to fetch the installer script and run it with perl. This is a manual installation method.

```bash
wget -O - https://cpanmin.us | perl - --sudo App::cpanminus
```

--------------------------------

### Start and stop the cluster

Source: https://wiki.dxcluster.org/wiki/Centos6

Commands to start and stop the DXspider cluster using upstart. The start command is '#start dxspider' and the stop command is '#stop dxspider'.

```bash
#start dxspider

```

```bash
#stop dxspider 

```

--------------------------------

### Expected startup output from cluster.pl

Source: https://wiki.dxcluster.org/wiki/Installing_the_software

Example of the display after running cluster.pl, showing version, loading messages, and startup status.

```text
DXSpider DX Cluster Version 1.50
Copyright (c) 1998-2002 Dirk Koopman G1TLH
loading prefixes ...
loading band data ...
loading user file system ...
starting listeners ...
Internal port: localhost 27754
load badwords: Ok
reading in duplicate spot and WWV info ...
reading existing message headers ...
load badmsg: Ok
load forward: Ok
load swop: Ok
@msg = 0 before delete
@msg = 0 after delete
reading cron jobs ...v cron: reading /spider/cmd/crontab
cron: adding 1 0 * * 0
DXUser::export("$main::data/user_asc")
reading database descriptors ...
doing local initialisation ...
orft we jolly well go ...
queue msg (0)
```

--------------------------------

### Install MRTG on Debian

Source: https://wiki.dxcluster.org/wiki/Web_based_statistics

Run these commands as root to update package lists and install the mrtg package, ensuring all dependencies are installed.

```bash
sudo apt-get update
sudo apt-get -y install mrtg
```

--------------------------------

### Create sysop user file with create_sysop.pl

Source: https://wiki.dxcluster.org/wiki/Centos6

Creates the basic user file with you as the sysop.

```bash
$ ./create_sysop.pl
```

--------------------------------

### Create local configuration directories and copy DXVars.pm

Source: https://wiki.dxcluster.org/wiki/Centos6

Sets up the local configuration directories and copies the distributed DXVars.pm template to local/DXVars.pm for editing.

```bash
$ cd /spider
$ mkdir local
$ mkdir local_cmd
$ cp perl/DXVars.pm.issue local/DXVars.pm
$ cd local
$ vi DXVars.pm (or your favourite editor)
```

--------------------------------

### DBCREATE chained database example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Defines a chained database 'sdx_qsl' that searches 'sql_ad' after it. No checking is done for existence of chained databases.

```text
 DBCREATE sdx_qsl chain sql_ad
```

--------------------------------

### Install cpanminus via apt

Source: https://wiki.dxcluster.org/wiki/UPDATE.mojo

Installs cpanminus using the system package manager on Debian-based systems. This is the first method presented for installing cpanminus.

```bash
sudo apt-get install cpanminus
```

--------------------------------

### SH/BUCK command example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example command that works after adding the alias entry, allowing users to query the buckmaster database.

```text
 SH/BUCK g1tlh
```

--------------------------------

### SHOW/DX example commands

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example invocations of the SHOW/DX command using various filters such as prefix, band, info text, day range, QSL, IOTA, QRA, DXCC, zones, and states.

```text
 SH/DX 9m0
 SH/DX on 20m info iota
 SH/DX 9a on vhf day 30
 SH/DX rf1p qsl
 SH/DX iota
 SH/DX iota eu-064
 SH/DX qra jn86
 SH/DX dxcc oq2
 SH/DX dxcc oq2 by w dxcc
 SH/DX zone 4,5,6
 SH/DX by_zone 4,5,6
 SH/DX state in,oh
 SH/DX by_state in,oh
```

--------------------------------

### Export user database to file

Source: https://wiki.dxcluster.org/wiki/Restoring_the_user_DB_(Mojo_branch)

Run in the sysop console on the origin node. Creates the file /tmp/example_json.

```text
export_json /tmp/example_json - (this creates the file /tmp/example_json)
```

--------------------------------

### Install rsync on Debian-based systems

Source: https://wiki.dxcluster.org/wiki/Node_Backup_and_Update_with_check_build

Command to install the rsync dependency.

```bash
apt install rsync
```

--------------------------------

### Run create_sysop.pl to create initial user files

Source: https://wiki.dxcluster.org/wiki/Installing_the_software

Run from the \spider\perl directory. Produces no output on success and returns to the DOS prompt.

```shell
cd \spider\perl
perl create_sysop.pl
```

--------------------------------

### set/badspotter example

Source: https://wiki.dxcluster.org/wiki/Other_filters

Example command to stop spots from bad spotters.

```text
set/badspotter b0mb p1rat nocall
```

--------------------------------

### set/badnode example

Source: https://wiki.dxcluster.org/wiki/Other_filters

Example command to stop spots from a particular node.

```text
set/badnode gb7djk gb7dxc
```

--------------------------------

### Enable dxspider.service

Source: https://wiki.dxcluster.org/wiki/Auto-start

Enables the service to start at boot. May be needed on some systems.

```bash
# systemctl enable dxspider.service
```

--------------------------------

### accept/spots by_state example

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example accept/spots filter for US states.

```text
 acc/spots by_state VA,NH,RI,MA,ME
```

--------------------------------

### Create /etc/init/dxspider.conf upstart script (Ubuntu 9.10+)

Source: https://wiki.dxcluster.org/wiki/Configuration

For Ubuntu 9.10 and later, place this script in /etc/init/dxspider.conf. It uses runlevel [2345] and stop on [!2345].

```bash
#DXSpider startup script
#
# This service maintains a getty on tty7 from the point the system is
# started until it is shut down again.
 

start on runlevel [2345]
stop on runlevel [!2345]
 
respawn
 
exec /bin/su - sysop -c "/usr/bin/perl -w /spider/perl/cluster.pl" >/dev/tty7
```

--------------------------------

### Enable NTP at boot

Source: https://wiki.dxcluster.org/wiki/Centos6

Configure the NTP service to start automatically at boot.

```bash
# chkconfig ntpd on
```

--------------------------------

### Install NTP

Source: https://wiki.dxcluster.org/wiki/Centos6

Install the NTP package to keep the system clock accurate.

```bash
# yum install ntp
```

--------------------------------

### SHOW/DXCC example commands

Source: https://wiki.dxcluster.org/wiki/DXSpider_Sysop_Command_Reference

Example usage of the SHOW/DXCC command, which is an alias for 'SHOW/DX DXCC'. The options for SHOW/DX also apply.

```text
  SH/DXCC G   SH/DXCC W on 20m iota
```

--------------------------------

### Scenario: Node-A and Node-B details

Source: https://wiki.dxcluster.org/wiki/Create_a_secure_connection_between_nodes

Example configuration for two nodes, including callsigns, passwords, hostnames, and ports.

```text
Node-A: XX0XX-2                    Node-B: ZZ8ZZ-4
password para ZZ8ZZ-4: A49=Dk4T    password para XX0XX-2: jTra691R
node-a.hams.org                    node-b.radio.com
port 7300                          port 8000
```

--------------------------------

### Telegram bot token example

Source: https://wiki.dxcluster.org/wiki/Sending_messages_to_the_sysop_via_Telegram

Example token format returned by BotFather.

```text
1234567890:AAEjg0EjEMPLO_T0KEN4PRUEBA1234
```

--------------------------------

### accept/announce examples

Source: https://wiki.dxcluster.org/wiki/DXSpider_User_Command_Reference

Example accept/announce filter commands: acc/ann dest 6MUK, acc/ann 2 by_zone 14,15,16, and a combined version on one line.

```plaintext
acc/ann dest 6MUK
acc/ann 2 by_zone 14,15,16
(this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
```
Tokens:
Raw