Debian Wiki

https://wiki.debian.org/
Admin
The Debian Wiki is a collaborative support and documentation resource for the Debian project,...
Tokens:58,028,989
Snippets:970,321
Trust Score:9.8
Update:4 months ago
Show doc for...
Tokens:
Raw
### Install Example Application Package

Source: https://wiki.debian.org/BOINC/ServerGuide/AppDeployment

Installs the example application package using the distribution's apt-get tool. This is the first step to obtain the necessary binaries.

```bash
$ sudo apt-get install boinc-app-examples
```

--------------------------------

### Install and Start BOINC Client on Debian

Source: https://wiki.debian.org/BOINC?action=diff&rev1=12&rev2=198

Installs the BOINC client, starts the service, and enables it to automatically start on boot. Use this for a standard user setup.

```bash
# install BOINC
sudo apt install boinc
# start the BOINC client
sudo systemctl start boinc-client
# enable autostart of BOINC client
sudo systemctl enable boinc-client
```

--------------------------------

### Install and Start Network Services

Source: https://wiki.debian.org/LXC?action=diff&rev1=211&rev2=212

Install necessary packages and start the default network service for host-shared bridge setup. This ensures the network is active and configured to start on boot.

```bash
sudo apt-get install -qy libvirt-clients libvirt-daemon-system iptables ebtables dnsmasq-base
sudo virsh net-start default
sudo virsh net-autostart default
```

--------------------------------

### Kernel Installation Process Example

Source: https://wiki.debian.org/DebianEdu/Documentation/ITIL/AllInOne?action=diff&rev1=8&rev2=9

This output demonstrates the typical process when updating package lists and installing a new SMP kernel using apt-get. It shows package fetching, dependency resolution, and disk space usage confirmation.

```text
tjener:~# apt-get update
tjener:~# apt-get install kernel-image-2.6-686-smp
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
  kernel-image-2.6.8-2-686-smp
Suggested packages:
  lilo kernel-doc-2.6.8 kernel-source-2.6.8
Recommended packages:
  irqbalance
The following NEW packages will be installed:
  kernel-image-2.6-686-smp kernel-image-2.6.8-2-686-smp
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 15.3MB of archives.
After unpacking 44.9MB of additional disk space will be used.
Do you want to continue? [Y/n] 
Get:1 http://ftp.debian.org sarge/main kernel-image-2.6.8-2-686-smp 2.6.8-16 [15.3MB]
Get:2 http://ftp.debian.org sarge/main kernel-image-2.6-686-smp 101 [2154B]
Fetched 15.3MB in 1m13s (208kB/s)
Selecting previously deselected package kernel-image-2.6.8-2-686-smp.
(Reading database ... 80762 files and directories currently installed.)
Unpacking kernel-image-2.6.8-2-686-smp (from .../kernel-image-2.6.8-2-686-smp_2.6.8-16_i386.deb) ...
Selecting previously deselected package kernel-image-2.6-686-smp.
Unpacking kernel-image-2.6-686-smp (from .../kernel-image-2.6-686-smp_101_i386.deb) ...
```

--------------------------------

### Example Package Installation Script

Source: https://wiki.debian.org/AideDeL%27InstallateurDePaquets

This script demonstrates the basic commands for creating a MoinMoin package. It includes commands for replacing underlay pages, adding revisions, and installing plugins.

```text
MoinMoinPackage|1
ReplaceUnderlay|mypage.txt|HelpContents
AddRevision|mypage2.txt|FrontPage
InstallPlugin|myparser.py|global|parser|myparser.py
```

--------------------------------

### Get Debian Installer AMI

Source: https://wiki.debian.org/Cloud/AmazonEC2DebianInstaller?action=diff&rev1=44&rev2=45

Starts a helper instance using a specified Debian Installer AMI.

```bash
HELPER_INSTANCE=$(runHelperInstance $INSTALLER_AMI)
```

--------------------------------

### Install BOINC Package on Debian

Source: https://wiki.debian.org/BOINC?action=diff&rev1=1&rev2=141

Installs the BOINC package on Debian. This is the primary method for users to get started with BOINC.

```bash
sudo apt-get install boinc-client
```

--------------------------------

### InstallPlugin Example

Source: https://wiki.debian.org/AideDeL%27InstallateurDePaquets

Installs a plugin file. Specify the source filename, visibility (local or global), plugin type, and target filename.

```text
InstallPlugin|myparser.py|global|parser|myparser.py
```

--------------------------------

### Install Networking Dependencies and Start Default Bridge

Source: https://wiki.debian.org/LXC

Installs necessary packages for network bridging and starts the default libvirt network. This setup provides a DHCP and NATed IPv4 network for containers.

```bash
$ sudo apt-get install -y libvirt-clients libvirt-daemon-system iptables ebtables dnsmasq-base libxml2-utils iproute2
$ sudo virsh net-start default
$ sudo virsh net-autostart default
```

--------------------------------

### Example sources.list Configuration

Source: https://wiki.debian.org/InstallingDebianOn/TUXEDO/NOTEBOOKS/Infinity-Pro-15-v5

A sample configuration for the /etc/apt/sources.list file, including main repositories, security updates, and backports.

```bash
# deb cdrom:[Official Debian GNU/Linux Live 10.10.0 xfce 2021-06-19T12:01]/ buster main
# deb cdrom:[Official Debian GNU/Linux Live 10.10.0 xfce 2021-06-19T12:01]/ buster main
deb http://deb.debian.org/debian/ buster main
# deb-src http://deb.debian.org/debian/ buster main
deb http://security.debian.org/debian-security buster/updates main
# deb-src http://security.debian.org/debian-security buster/updates main
# buster-updates, previously known as 'volatile'
deb http://deb.debian.org/debian/ buster-updates main
# deb-src http://deb.debian.org/debian/ buster-updates main
deb http://deb.debian.org/debian buster-backports main
```

--------------------------------

### Prepare System and Install Dependencies

Source: https://wiki.debian.org/MultiarchCrossToolchainBootstrap

Initial setup for bootstrapping a multiarch toolchain. This includes creating a chroot environment, updating package lists, and installing necessary build tools for the target architecture.

```bash
sudo debootstrap sid sid-chroot
sudo pbuilder login --no-targz --buildplace sid-chroot
sed -i ’s/^deb http/deb [arch=amd64] http/‘ /etc/apt/sources.list
echo “deb-src http://httpredir.debian.org/debian sid main” >> /etc/apt/sources.list
dpkg --add-architecture mips64el
apt-get update
apt-get install binutils-mips64el-linux-gnuabi64 devscripts rdfind symlinks
```

--------------------------------

### Example Buster Backports Packages

Source: https://wiki.debian.org/InstallingDebianOn/Acer/Aspire%205%20A515-56?highlight=%28powered%29

A list of packages that were installed from buster-backports to get GNOME working on a default Buster install. Not all may be necessary.

```text
e2fsprogs/buster-backports,now 1.45.5-2~bpo10+1 amd64 [installed]
firmware-amd-graphics/buster-backports,now 20200918-1~bpo10+1 all [installed,automatic]
firmware-intel-sound/buster-backports,now 20200918-1~bpo10+1 all [installed]
firmware-linux-nonfree/buster-backports,now 20200918-1~bpo10+1 all [installed]
firmware-linux/buster-backports,now 20200918-1~bpo10+1 all [installed]
firmware-misc-nonfree/buster-backports,now 20200918-1~bpo10+1 all [installed]
firmware-realtek/buster-backports,now 20200918-1~bpo10+1 all [installed]
libcom-err2/buster-backports,now 1.45.5-2~bpo10+1 amd64 [installed]
libcryptsetup12/buster-backports,now 2:2.3.4-2~bpo10+2 amd64 [installed]
libext2fs2/buster-backports,now 1.45.5-2~bpo10+1 amd64 [installed]
libnss-systemd/buster-backports,now 247.2-4~bpo10+1 amd64 [installed]
libpam-systemd/buster-backports,now 247.2-4~bpo10+1 amd64 [installed]
libpolkit-agent-1-0/stable,now 0.105-25 amd64 [installed,automatic]
libpolkit-backend-1-0/stable,now 0.105-25 amd64 [installed,automatic]
libpolkit-gobject-1-0/stable,now 0.105-25 amd64 [installed,automatic]
libpoppler-glib8/stable,now 0.71.0-5 amd64 [installed,automatic]
libpoppler82/stable,now 0.71.0-5 amd64 [installed,automatic]
libpopt0/stable,now 1.16-12 amd64 [installed]
libpostproc55/stable,stable,now 7:4.1.6-1~deb10u1 amd64 [installed,automatic]
libseccomp2/buster-backports,now 2.4.4-1~bpo10+1 amd64 [installed]
libss2/buster-backports,now 1.45.5-2~bpo10+1 amd64 [installed]
libsystemd0/buster-backports,now 247.2-4~bpo10+1 amd64 [installed]
libudev1/buster-backports,now 247.2-4~bpo10+1 amd64 [installed]
libzstd1/buster-backports,now 1.4.4+dfsg-3~bpo10+1 amd64 [installed]
linux-image-5.9.0-0.bpo.5-amd64/buster-backports,now 5.9.15-1~bpo10+1 amd64 [installed]
linux-image-amd64/buster-backports,now 5.9.15-1~bpo10+1 amd64 [installed]
logsave/buster-backports,now 1.45.5-2~bpo10+1 amd64 [installed]
systemd-sysv/buster-backports,now 247.2-4~bpo10+1 amd64 [installed]
systemd-timesyncd/buster-backports,now 247.2-4~bpo10+1 amd64 [installed]
systemd/buster-backports,now 247.2-4~bpo10+1 amd64 [installed]
udev/buster-backports,now 247.2-4~bpo10+1 amd64 [installed]
wireless-regdb/buster-backports,now 2020.04.29-2~bpo10+1 all [installed,automatic]
```
Tokens:
Raw