### Run Vesta Installation Script

Source: https://vestacp.com/docs/how-to-install-vesta-control-panel

Execute the downloaded installation script to begin the Vesta Control Panel setup.

```bash
bash vst-install.sh
```

--------------------------------

### Enable and Start ProFTPD Service

Source: https://vestacp.com/docs/how-to-replace-vsftpd-with-proftpd-on-a-rhel-or-centos

Enable the ProFTPD service to start on boot and then start the service immediately.

```bash
chkconfig proftpd on
service proftpd start
```

--------------------------------

### Start PostgreSQL Server

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-rhel-or-centos

Starts the PostgreSQL database server service.

```bash
service postgresql start

```

--------------------------------

### Install Fail2Ban Package

Source: https://vestacp.com/docs/how-to-install-fail2ban-on-debian-or-ubuntu

Installs the Fail2Ban package using apt-get. This is the initial step for setting up Fail2Ban.

```bash
apt-get install fail2ban
```

--------------------------------

### Start Percona Server

Source: https://vestacp.com/docs/how-to-replace-mysql-with-percona-server-on-rhel-or-centos

Starts the Percona Server service. The service is typically named 'mysql'.

```bash
service mysql start

```

--------------------------------

### Launch Fail2Ban Service

Source: https://vestacp.com/docs/how-to-install-fail2ban-on-debian-or-ubuntu

Configures Fail2Ban to start on boot and then starts the Fail2Ban service. This activates Fail2Ban's protection.

```bash
update-rc.d fail2ban defaults
service fail2ban start
```

--------------------------------

### Install Percona Server Packages

Source: https://vestacp.com/docs/how-to-replace-mysql-with-percona-server-debian-or-ubuntu

Install the Percona Server packages. Do not change the root password when prompted.

```bash
apt-get install percona-server-server-5.5 percona-server-client-5.5
```

--------------------------------

### Install PostgreSQL Packages

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-debian-or-ubuntu

Installs the necessary PostgreSQL server and contrib packages, along with the phpPgAdmin web interface.

```bash
apt-get install postgresql postgresql-contrib phppgadmin

```

--------------------------------

### Install PostgreSQL Packages

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-rhel-or-centos

Installs PostgreSQL, its server components, contrib modules, and phpPgAdmin. Use the --enablerepo=remi flag if the 'remi' repository is enabled.

```bash
yum install postgresql postgresql-server postgresql-contrib phpPgAdmin

```

```bash
yum install --enablerepo=remi postgresql postgresql-server postgresql-contrib phpPgAdmin

```

--------------------------------

### Download Vesta Installation Script

Source: https://vestacp.com/docs/how-to-install-vesta-control-panel

Download the official Vesta Control Panel installation script using curl.

```bash
curl -O https://vestacp.com/pub/vst-install.sh
```

--------------------------------

### Install Percona Repository

Source: https://vestacp.com/docs/how-to-replace-mysql-with-percona-server-on-rhel-or-centos

Installs the Percona repository configuration package on RHEL or CentOS systems.

```bash
yum install https://www.percona.com/redir/downloads/percona-release/redhat/latest/percona-release-0.1-3.noarch.rpm

```

--------------------------------

### Start System Service

Source: https://vestacp.com/docs

Initiates the operation of a specified system service.

```bash
v-start-service SERVICE
```

--------------------------------

### Install fcgid Apache module and enable it

Source: https://vestacp.com/docs/how-to-enable-php-fcgi-support-on-a-debian-or-ubuntu

Installs the Apache module for FastCGI and enables it. This is a prerequisite for using PHP-FCGI.

```bash
apt-get install libapache2-mod-fcgid
a2enmod fcgid

```

--------------------------------

### Install SpamAssassin

Source: https://vestacp.com/docs/how-to-install-clamav-and-spamassassin-on-a-debian-or-ubuntu

Installs the SpamAssassin spam filtering package, enables the service, and restarts it.

```bash
apt-get install spamassassin
update-rc.d spamassassin defaults
sed -i "s/ENABLED=0/ENABLED=1/" /etc/default/spamassassin
service spamassassin restart
```

--------------------------------

### Install Percona Server

Source: https://vestacp.com/docs/how-to-replace-mysql-with-percona-server-on-rhel-or-centos

Installs the Percona Server package. Use 'Percona-Server-server-56' for version 5.6 or 'Percona-Server-server-57' for version 5.7.

```bash
yum install Percona-Server-server-56

```

--------------------------------

### Install ProFTPD Packages

Source: https://vestacp.com/docs/how-to-replace-vsftpd-with-proftpd-on-a-debian-or-ubuntu

Installs the basic ProFTPD package along with the vroot module, which is necessary for virtual root configurations.

```bash
apt-get install proftpd-basic proftpd-mod-vroot
```

--------------------------------

### Set Percona Server to Auto-start

Source: https://vestacp.com/docs/how-to-replace-mysql-with-percona-server-debian-or-ubuntu

Configure the Percona Server service to start automatically on system boot.

```bash
update-rc.d mysql defaults
```

--------------------------------

### Install ClamAV Packages and Configuration

Source: https://vestacp.com/docs/how-to-install-clamav-and-spamassassin-on-a-rhel-or-centos

Installs ClamAV, downloads its configuration files, adds the 'clam' user to necessary groups, updates virus definitions, and enables/starts the ClamAV daemon.

```bash
yum install clamd
wget http://c.vestacp.com/0.9.8/rhel/clamd.conf -O /etc/clamd.conf
wget http://c.vestacp.com/0.9.8/rhel/freshclam.conf -O /etc/freshclam.conf
gpasswd -a clam exim
gpasswd -a clam mail
freshclam
chkconfig clamd on
service clamd start
```

--------------------------------

### Install WHMCS Module

Source: https://vestacp.com/docs/how-to-install-whmcs-module

This command sequence installs the WHMCS module by navigating to the correct directory, creating a new directory for the module, and downloading the module file.

```bash
cd /home/user/web/billing-site.ltd/public_html/modules/server
mkdir vesta
wget http://c.vestacp.com/0.9.8/rhel/whmcs-module.php -O vesta.php
```

--------------------------------

### Install WSGI Apache Module

Source: https://vestacp.com/docs/how-to-enable-wsgi-support-on-a-debian-or-ubuntu

Installs the WSGI module for Apache and enables it. Run this command on your Debian or Ubuntu server.

```bash
apt-get install libapache2-mod-wsgi
a2enmod wsgi
```

--------------------------------

### Install mod_fcgid Apache Module

Source: https://vestacp.com/docs/how-to-enable-php-fcgi-support-on-a-rhel-or-centos

Installs the necessary Apache module for FastCGI support using yum.

```bash
yum install mod_fcgid

```

--------------------------------

### Install WSGI Apache Module

Source: https://vestacp.com/docs/how-to-enable-wsgi-support-on-a-rhel-or-centos

Installs the mod_wsgi package using yum. This is the first step to enable WSGI support.

```bash
yum install mod_wsgi

```

--------------------------------

### Install ProFTPD Package

Source: https://vestacp.com/docs/how-to-replace-vsftpd-with-proftpd-on-a-rhel-or-centos

Install the ProFTPD package using yum, the default package manager for RHEL and CentOS.

```bash
yum install proftpd
```

--------------------------------

### Install Fail2Ban Package

Source: https://vestacp.com/docs/how-to-install-fail2ban-on-rhel-or-centos

Use yum to install the Fail2Ban package on RHEL or CentOS systems.

```bash
yum install fail2ban

```

--------------------------------

### Add Percona Repository

Source: https://vestacp.com/docs/how-to-replace-mysql-with-percona-server-debian-or-ubuntu

Add the Percona repository to your system's sources list to enable package installation. Replace VERSION with your distribution's codename.

```bash
deb http://repo.percona.com/apt VERSION main
deb-src http://repo.percona.com/apt VERSION main
```

--------------------------------

### Install ClamAV Daemon

Source: https://vestacp.com/docs/how-to-install-clamav-and-spamassassin-on-a-debian-or-ubuntu

Installs the ClamAV antivirus daemon, downloads a specific configuration file, adds the 'clamav' user to relevant groups, updates virus definitions, enables the service, and restarts it.

```bash
apt-get install clamav-daemon
wget http://c.vestacp.com/0.9.8/ubuntu/clamd.conf -O /etc/clamav/clamd.conf
gpasswd -a clamav mail
gpasswd -a clamav Debian-exim
freshclam
update-rc.d clamav-daemon defaults
service clamav-daemon restart
```

--------------------------------

### Import Percona GPG Key

Source: https://vestacp.com/docs/how-to-replace-mysql-with-percona-server-debian-or-ubuntu

Import the Percona GPG key to verify package authenticity before installation.

```bash
apt-key adv --keyserver keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A
```

--------------------------------

### v-schedule-letsencrypt-domain

Source: https://vestacp.com/docs/cli

Adds a cron job for Let's Encrypt SSL certificate installation for a domain. Supports USER, DOMAIN, and optional ALIASES.

```APIDOC
## v-schedule-letsencrypt-domain

### Description
Adds a cron job for Let's Encrypt SSL certificate installation for a domain.

### Method
Not specified (CLI command)

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username associated with the domain.
- **DOMAIN** (string) - Required - The domain for which to schedule certificate installation.
- **ALIASES** (string) - Optional - Comma-separated list of domain aliases.
```

--------------------------------

### Example DNS Records for XMPP

Source: https://vestacp.com/docs/how-to-configure-service-records

These are example DNS records required for a typical XMPP infrastructure. They include an 'A' record for the server and two 'SRV' records for service auto-detection.

```dns
xmpp 18000 IN A 192.168.1.1
_xmpp-client._tcp.example.com. 18000 IN SRV 0 5 5222 xmpp.example.com.
_xmpp-server._tcp.example.com. 18000 IN SRV 0 5 5269 xmpp.example.com.
```

--------------------------------

### Install Custom Nginx Template for Force HTTPS

Source: https://vestacp.com/docs/how-to-force-https-ssl-on-a-domain

Download and extract the custom Nginx template designed to force HTTPS. This template should be placed in the web templates directory.

```bash
cd /usr/local/vesta/data/templates/web
wget http://c.vestacp.com/0.9.8/rhel/force-https/nginx.tar.gz
tar -xzvf nginx.tar.gz
rm -f nginx.tar.gz
```

--------------------------------

### Get User Value

Source: https://vestacp.com/docs

Retrieves a specific user parameter by key.

```bash
v-get-user-value USER KEY
```

--------------------------------

### Redirect Wildcard Subdomains to Folders

Source: https://vestacp.com/docs/how-to-redirect-subdomain-to-folder-using-htaccess

This configuration handles wildcard subdomains, redirecting any subdomain (except 'www') to a folder named after the subdomain. For example, 'blog.domain.com' would be redirected to '/blog/'. Ensure the target directories are created.

```apache
RewriteEngine On
RewriteBase /
RewriteCond %{HTTP_HOST} ^(?!www\.)([^.]+)\.domain\.com$ [NC]
RewriteCond %{REQUEST_URI}::%1 !^/([^/]+).*?::\1
RewriteRule ^(.*)$ /%1/$1 [L]
```

--------------------------------

### Create User Account with VestaCP API

Source: https://vestacp.com/docs/api

This snippet demonstrates how to create a new user account in VestaCP using the API. It requires server credentials and details for the new account. Ensure the cURL extension is enabled in your PHP installation.

```php
<?php

// Server credentials
$vst_hostname = 'server.vestacp.com';
$vst_username = 'admin';
$vst_password = 'p4ssw0rd';
$vst_returncode = 'yes';
$vst_command = 'v-add-user';

// New Account
$username = 'demo';
$password = 'd3m0p4ssw0rd';
$email = 'demo@gmail.com';
$package = 'default';
$fist_name = 'Rust';
$last_name = 'Cohle';

// Prepare POST query
$postvars = array(
    'user' => $vst_username,
    'password' => $vst_password,
    'returncode' => $vst_returncode,
    'cmd' => $vst_command,
    'arg1' => $username,
    'arg2' => $password,
    'arg3' => $email,
    'arg4' => $package,
    'arg5' => $fist_name,
    'arg6' => $last_name
);
$postdata = http_build_query($postvars);

// Send POST query via cURL
$postdata = http_build_query($postvars);
$curl = curl_init();
curl_setopt($curl, CURLOPT_URL, 'https://' . $vst_hostname . ':8083/api/');
curl_setopt($curl, CURLOPT_RETURNTRANSFER,true);
curl_setopt($curl, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($curl, CURLOPT_SSL_VERIFYHOST, false);
curl_setopt($curl, CURLOPT_POST, true);
curl_setopt($curl, CURLOPT_POSTFIELDS, $postdata);
$answer = curl_exec($curl);

// Check result
if($answer == 0) {
    echo "User account has been successfuly created\n";
} else {
    echo "Query returned error code: " .$answer. "\n";
}
?>

```

--------------------------------

### Update php-mysqlnd and phpMyAdmin

Source: https://vestacp.com/docs/how-to-replace-mysql-with-percona-server-on-rhel-or-centos

Installs or updates the php-mysqlnd package and phpMyAdmin, enabling the 'remi' repository. It also restores the phpMyAdmin configuration file and restarts the Apache web server.

```bash
yum install php-mysqlnd phpmyadmin --enablerepo=remi
mv /etc/httpd/conf.d/phpMyAdmin.conf.rpmsave /etc/httpd/conf.d/phpMyAdmin.conf
service httpd restart

```

--------------------------------

### Add System User

Source: https://vestacp.com/docs

Creates a new user account on the system. Requires username, password, and email. Optional parameters include package, first name, and last name.

```bash
v-add-user USER PASSWORD EMAIL [PACKAGE] [FNAME] [LNAME]
```

--------------------------------

### List System Configuration

Source: https://vestacp.com/docs

Retrieves a list of system parameters. The output format can be specified.

```bash
v-list-sys-config [FORMAT]
```

--------------------------------

### Generate API Key

Source: https://vestacp.com/docs

Creates an API key file in /usr/local/vesta/data/keys/

```bash
v-generate-api-key NONE
```

--------------------------------

### Download phpPgAdmin Configuration Files

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-debian-or-ubuntu

Downloads the necessary configuration files for phpPgAdmin, including the main config and Apache configuration.

```bash
wget http://c.vestacp.com/0.9.8/debian/pga.conf -O /etc/phppgadmin/config.inc.php
wget http://c.vestacp.com/0.9.8/debian/apache2-pga.conf -O /etc/apache2/conf.d/phppgadmin

```

--------------------------------

### List Databases

Source: https://vestacp.com/docs

Retrieves parameters for all databases. The output format can be specified.

```bash
v-list-database USER DATABASE [FORMAT]
```

--------------------------------

### Initialize PostgreSQL Database Cluster

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-rhel-or-centos

Initializes the database cluster for PostgreSQL. This command prepares the data directory for use.

```bash
service postgresql initdb

```

--------------------------------

### List System Services

Source: https://vestacp.com/docs/cli

Retrieves a list of configured system services. Specify the desired output format.

```bash
v-list-sys-services [FORMAT]
```

--------------------------------

### List User Packages

Source: https://vestacp.com/docs/cli

Retrieves a list of packages assigned to a user. Specify the desired output format.

```bash
v-list-user-package USER [FORMAT]
```

--------------------------------

### Rebuild Web Domain Configurations

Source: https://vestacp.com/docs/how-to-remove-nginx-on-a-rhel-or-centos

Iterate through all system users and rebuild their web domain configurations to apply the changes.

```bash
for user in $(v-list-sys-users plain); do v-rebuild-web-domains $user; done

```

--------------------------------

### List Supported Database Types

Source: https://vestacp.com/docs

Retrieves a list of supported database types. The output format can be specified.

```bash
v-list-database-types [FORMAT]
```

--------------------------------

### Stop and Disable vsftpd Service

Source: https://vestacp.com/docs/how-to-replace-vsftpd-with-proftpd-on-a-rhel-or-centos

Use these commands to stop the running vsftpd service and prevent it from starting on boot.

```bash
service vsftpd stop
chkconfig vsftpd off
```

--------------------------------

### Add User Package

Source: https://vestacp.com/docs

Adds a new user package to the system. Options include package directory and package name, with an optional rewrite flag.

```bash
v-add-user-package PKG_DIR PACKAGE [REWRITE]
```

--------------------------------

### Delete Vesta Data Directory

Source: https://vestacp.com/docs/how-to-uninstall-vesta-control-panel

Remove the main Vesta data directory to clean up installed files and configurations.

```bash
rm -rf /usr/local/vesta

```

--------------------------------

### Stop and Remove vsftpd Service

Source: https://vestacp.com/docs/how-to-replace-vsftpd-with-proftpd-on-a-debian-or-ubuntu

Stops the vsftpd service and removes it from the system's run levels to prevent it from starting automatically.

```bash
service vsftpd stop
update-rc.d -f vsftpd remove
```

--------------------------------

### Connect to Server via SSH

Source: https://vestacp.com/docs/how-to-install-vesta-control-panel

Use this command to establish an SSH connection to your server as the root user.

```bash
ssh root@your.server-name
```

--------------------------------

### Get Mail Domain Value

Source: https://vestacp.com/docs/cli

Retrieves a specific parameter value for a mail domain. Requires user, domain, and the key of the parameter.

```bash
v-get-mail-domain-value USER DOMAIN KEY
```

--------------------------------

### Rebuild Web Domain Configurations

Source: https://vestacp.com/docs/how-to-remove-nginx-on-a-debian-or-ubuntu

Iterate through all system users and rebuild their web domain configurations to apply the updated settings.

```bash
for user in $(v-list-sys-users plain); do v-rebuild-web-domains $user; done
```

--------------------------------

### Mail Client Configuration Settings

Source: https://vestacp.com/docs/how-to-properly-set-up-a-mail-client

Use these settings for IMAP and SMTP STARTTLS with normal passwords. Ensure you use your full email address as the username.

```text
Username: william.cage@alpha-mimic.ltd
Password: aXly8Kbiqo

IMAP hostname: alpha-mimic.ltd
IMAP port: 143
IMAP security: STARTTLS
IMAP auth method: Normal password

SMTP hostname: alpha-mimic.ltd
SMTP port: 587
SMTP security: STARTTLS
SMTP auth method: Normal password
```

--------------------------------

### Remove Nginx Package

Source: https://vestacp.com/docs/how-to-remove-nginx-on-a-debian-or-ubuntu

Use the system's package manager to remove the Nginx package. Note: This example uses 'yum', which is typically for RHEL-based systems. For Debian/Ubuntu, 'apt' or 'apt-get' should be used.

```bash
yum remove nginx
```

--------------------------------

### List System Information

Source: https://vestacp.com/docs

Checks for available updates for Vesta packages. Supports optional formatting.

```bash
v-list-sys-info [FORMAT]
```

--------------------------------

### List Database Hosts

Source: https://vestacp.com/docs/how-to-add-remote-mysql-database-server

Verify that the remote MySQL database host has been successfully added by listing all configured database hosts.

```bash
v-list-database-hosts

```

--------------------------------

### Backup User Account

Source: https://vestacp.com/docs/how-to-migrate-user-to-the-new-server

Use this command on the old server to create a backup of a specific user's data. Replace 'admin' with the actual username.

```bash
v-backup-user admin
```

--------------------------------

### Download Fail2Ban Configuration

Source: https://vestacp.com/docs/how-to-install-fail2ban-on-rhel-or-centos

Download the Fail2Ban configuration archive from the provided URL and save it as fail2ban.tar.gz.

```bash
cd /etc
wget http://c.vestacp.com/0.9.8/rhel/fail2ban.tar.gz -O fail2ban.tar.gz

```

--------------------------------

### v-add-backup-host

Source: https://vestacp.com/docs/cli

Adds a backup host. Requires TYPE, HOST, USERNAME, and PASSWORD. Optional parameters include PATH and PORT.

```APIDOC
## v-add-backup-host

### Description
Adds a backup host.

### Method
Not specified (CLI command)

### Parameters
#### Path Parameters
- **TYPE** (string) - Required - The type of backup host (e.g., 'FTP', 'SFTP', 'S3').
- **HOST** (string) - Required - The hostname or IP address of the backup host.
- **USERNAME** (string) - Required - The username for connecting to the backup host.
- **PASSWORD** (string) - Required - The password for connecting to the backup host.
- **PATH** (string) - Optional - The path on the backup host where backups should be stored.
- **PORT** (integer) - Optional - The port number for connecting to the backup host.
```

--------------------------------

### v-add-database-host

Source: https://vestacp.com/docs/cli

Adds a new database server to the server pool.

```APIDOC
## v-add-database-host

### Description
Adds a new database server to the server pool. Supports local and remote database servers. Allows setting a limit for the number of databases on a host. The template parameter is used only for PostgreSQL.

### Method
CLI Command

### Endpoint
v-add-database-host TYPE HOST DBUSER DBPASS [MAX_DB] [CHARSETS] [TEMPLATE]

### Parameters
#### Path Parameters
- **TYPE** (string) - Required - The type of database server (e.g., 'mysql', 'pgsql').
- **HOST** (string) - Required - The hostname or IP address of the database server.
- **DBUSER** (string) - Required - The username for connecting to the database server.
- **DBPASS** (string) - Required - The password for connecting to the database server.
- **MAX_DB** (integer) - Optional - The maximum number of databases allowed on this host.
- **CHARSETS** (string) - Optional - The character sets to support.
- **TEMPLATE** (string) - Optional - The template to use for PostgreSQL databases (default: 'template1').
```

--------------------------------

### v-list-sys-php-config

Source: https://vestacp.com/docs/cli

Lists PHP configuration parameters.

```APIDOC
## v-list-sys-php-config

### Description
Obtains the list of PHP configuration parameters.

### Method
CLI Command

### Endpoint
v-list-sys-php-config [FORMAT]

### Parameters
#### Query Parameters
- **FORMAT** (string) - Optional - Specifies the output format.
```

--------------------------------

### Download ProFTPD Configuration

Source: https://vestacp.com/docs/how-to-replace-vsftpd-with-proftpd-on-a-rhel-or-centos

Download the ProFTPD configuration file from the VestaCP repository and save it to the correct location.

```bash
wget http://c.vestacp.com/0.9.8/rhel/proftpd.conf -O /etc/proftpd.conf
```

--------------------------------

### Download Fail2Ban Configuration

Source: https://vestacp.com/docs/how-to-install-fail2ban-on-debian-or-ubuntu

Downloads the Fail2Ban configuration archive from a specified URL to the /etc directory. This prepares the configuration files for extraction.

```bash
cd /etc
wget http://c.vestacp.com/0.9.8/ubuntu/fail2ban.tar.gz -O fail2ban.tar.gz
```

--------------------------------

### List PostgreSQL Configuration

Source: https://vestacp.com/docs

Retrieves a list of PostgreSQL configuration parameters. Output can be formatted.

```bash
v-list-sys-pgsql-config [FORMAT]
```

--------------------------------

### Create Database

Source: https://vestacp.com/docs/api

This snippet demonstrates how to create a new database in VestaCP. It requires server credentials and database details such as name, user, and password.

```php
<?php
// Server credentials
$vst_hostname = 'server.vestacp.com';
$vst_username = 'admin';
$vst_password = 'p4ssw0rd';
$vst_returncode = 'yes';
$vst_command = 'v-add-database';

// New Database
$username = 'demo';
$db_name = 'wordpress';
$db_user = 'wordpress';
$db_pass = 'wpbl0gp4s';

// Prepare POST query
$postvars = array(
    'user' => $vst_username,
    'password' => $vst_password,
    'returncode' => $vst_returncode,
    'cmd' => $vst_command,
    'arg1' => $username,
    'arg2' => $db_name,
    'arg3' => $db_user,
    'arg4' => $db_pass
);
$postdata = http_build_query($postvars);

// Send POST query via cURL
$curl = curl_init();
curl_setopt($curl, CURLOPT_URL, 'https://' . $vst_hostname . ':8083/api/');
curl_setopt($curl, CURLOPT_RETURNTRANSFER,true);
curl_setopt($curl, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($curl, CURLOPT_SSL_VERIFYHOST, false);
curl_setopt($curl, CURLOPT_POST, true);
curl_setopt($curl, CURLOPT_POSTFIELDS, $postdata);
$answer = curl_exec($curl);

// Check result
if($answer == 0) {
    echo "Database has been successfuly created\n";
} else {
    echo "Query returned error code: " .$answer. "\n";
}
?>
```

--------------------------------

### List System Network Interfaces

Source: https://vestacp.com/docs/cli

Retrieves a list of the system's network interfaces. Specify the desired output format.

```bash
v-list-sys-interfaces [FORMAT]
```

--------------------------------

### v-add-sys-firewall

Source: https://vestacp.com/docs/cli

Enables the system firewall.

```APIDOC
## v-add-sys-firewall

### Description
Enables the system firewall.

### Method
CLI Command

### Endpoint
v-add-sys-firewall NONE

### Parameters
#### Path Parameters
- **NONE** (string) - This parameter is a placeholder and does not take any specific value.
```

--------------------------------

### Download and Extract FCGI Template

Source: https://vestacp.com/docs/how-to-enable-php-fcgi-support-on-a-rhel-or-centos

Downloads the FCGI template for Apache and extracts it to the VestaCP templates directory. The downloaded archive is then removed.

```bash
cd /usr/local/vesta/data/templates/web
wget http://c.vestacp.com/0.9.8/rhel/fcgid/httpd.tar.gz
tar -xzvf httpd.tar.gz
rm -f httpd.tar.gz

```

--------------------------------

### v-list-database-hosts

Source: https://vestacp.com/docs/cli

Lists all configured database hosts on the server.

```APIDOC
## v-list-database-hosts

### Description
Retrieves a list of all configured database hosts.

### Method
Not applicable (CLI command)

### Parameters
#### Options
- **[FORMAT]**: Specifies the output format (e.g., json, shell, plain).
```

--------------------------------

### List Users

Source: https://vestacp.com/docs

Obtains a list of all system users. The output format can be specified.

```bash
v-list-users [FORMAT]
```

--------------------------------

### Search System Objects

Source: https://vestacp.com/docs

Searches for system objects. The output can be formatted.

```bash
v-search-object OBJECT [FORMAT]
```

--------------------------------

### List ProFTPd Configuration

Source: https://vestacp.com/docs

Retrieves a list of ProFTPd configuration parameters. Output can be formatted.

```bash
v-list-sys-proftpd-config [FORMAT]
```

--------------------------------

### Download and extract fcgid template for Apache

Source: https://vestacp.com/docs/how-to-enable-php-fcgi-support-on-a-debian-or-ubuntu

Downloads the Apache template for FCGI support from the VestaCP repository, extracts it, and removes the archive. This template is used to configure Apache for FCGI.

```bash
cd /usr/local/vesta/data/templates/web
wget http://c.vestacp.com/0.9.8/ubuntu/fcgid/apache2.tar.gz
tar -xzvf apache2.tar.gz
rm -f apache2.tar.gz

```

--------------------------------

### v-list-web-templates-backend

Source: https://vestacp.com/docs/cli

Lists the available backend templates for web domains. Supports optional FORMAT.

```APIDOC
## v-list-web-templates-backend

### Description
Lists the available backend templates for web domains.

### Method
Not specified (CLI command)

### Parameters
#### Path Parameters
- **FORMAT** (string) - Optional - The desired output format.
```

--------------------------------

### Add Remote DNS Host (Slave)

Source: https://vestacp.com/docs/how-to-set-up-master-slave-dns-cluster

Use this command on the master server to register a DNS slave host. Replace 'slave.yourhost.com', '8083', and 'p4sw0rd' with your specific slave server details.

```bash
v-add-remote-dns-host slave.yourhost.com 8083 admin p4sw0rd

```

--------------------------------

### v-add-sys-sftp-jail

Source: https://vestacp.com/docs/cli

Enables a jailed SFTP environment for the system.

```APIDOC
## v-add-sys-sftp-jail

### Description
Enables a secure, jailed SFTP environment for users, restricting their access to specific directories.

### Method
Not applicable (CLI command)

### Parameters
None.
```

--------------------------------

### List vsftpd Configuration

Source: https://vestacp.com/docs

Retrieves a list of vsftpd configuration parameters. Output can be formatted.

```bash
v-list-sys-vsftpd-config [FORMAT]
```

--------------------------------

### Create User Account

Source: https://vestacp.com/docs/api

This snippet demonstrates how to create a new user account using the Vesta API. It includes server credentials, new account details, and the cURL request to the API endpoint.

```APIDOC
## Create User Account

### Description
Creates a new user account on the Vesta Control Panel.

### Method
POST

### Endpoint
https://{server.vestacp.com}:8083/api/

### Parameters
#### Request Body
- **user** (string) - Required - The username for API authentication.
- **password** (string) - Required - The password for API authentication.
- **returncode** (string) - Optional - Set to 'yes' to receive a return code.
- **cmd** (string) - Required - The command to execute, e.g., 'v-add-user'.
- **arg1** (string) - Required - The username for the new account.
- **arg2** (string) - Required - The password for the new account.
- **arg3** (string) - Required - The email address for the new account.
- **arg4** (string) - Required - The package name for the new account.
- **arg5** (string) - Required - The first name of the new user.
- **arg6** (string) - Required - The last name of the new user.

### Request Example
```php
<?php

// Server credentials
$vst_hostname = 'server.vestacp.com';
$vst_username = 'admin';
$vst_password = 'p4ssw0rd';
$vst_returncode = 'yes';
$vst_command = 'v-add-user';

// New Account
$username = 'demo';
$password = 'd3m0p4ssw0rd';
$email = 'demo@gmail.com';
$package = 'default';
$fist_name = 'Rust';
$last_name = 'Cohle';

// Prepare POST query
$postvars = array(
    'user' => $vst_username,
    'password' => $vst_password,
    'returncode' => $vst_returncode,
    'cmd' => $vst_command,
    'arg1' => $username,
    'arg2' => $password,
    'arg3' => $email,
    'arg4' => $package,
    'arg5' => $fist_name,
    'arg6' => $last_name
);
$postdata = http_build_query($postvars);

// Send POST query via cURL
$curl = curl_init();
curl_setopt($curl, CURLOPT_URL, 'https://' . $vst_hostname . ':8083/api/');
curl_setopt($curl, CURLOPT_RETURNTRANSFER,true);
curl_setopt($curl, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($curl, CURLOPT_SSL_VERIFYHOST, false);
curl_setopt($curl, CURLOPT_POST, true);
curl_setopt($curl, CURLOPT_POSTFIELDS, $postdata);
$answer = curl_exec($curl);

// Check result
if($answer == 0) {
    echo "User account has been successfuly created\n";
} else {
    echo "Query returned error code: " .$answer. "\n";
}
?>
```

### Response
#### Success Response (0)
Indicates successful user account creation.

#### Error Response
Returns an error code indicating the reason for failure.
```

--------------------------------

### Download PostgreSQL HBA Configuration

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-debian-or-ubuntu

Downloads the hba configuration file from a remote URL and saves it to the PostgreSQL configuration directory, overwriting the existing file.

```bash
wget http://c.vestacp.com/0.9.8/debian/pg_hba.conf -O /etc/postgresql/*/main/pg_hba.conf

```

--------------------------------

### Activate SFTP Server Plugin

Source: https://vestacp.com/docs/paid-plugins

Use this code to activate the SFTP Server plugin. Any text can be used as an activation code in this version.

```bash
FREESFTP
```

--------------------------------

### Open Filesystem File

Source: https://vestacp.com/docs

Opens or reads files on the file system for a given user.

```bash
v-open-fs-file USER FILE
```

--------------------------------

### Download ProFTPD Configuration

Source: https://vestacp.com/docs/how-to-replace-vsftpd-with-proftpd-on-a-debian-or-ubuntu

Downloads the ProFTPD configuration file from a remote URL and saves it to the appropriate location on the server.

```bash
wget http://c.vestacp.com/0.9.8/debian/proftpd.conf -O /etc/proftpd/proftpd.conf
```

--------------------------------

### v-restart-web

Source: https://vestacp.com/docs/cli

Restarts the web server, reloading its configuration.

```APIDOC
## v-restart-web

### Description
Reloads the web server configuration by restarting the web server process.

### Method
Not applicable (CLI command)

### Parameters
None.
```

--------------------------------

### Register PostgreSQL Instance in VestaCP

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-debian-or-ubuntu

Registers the PostgreSQL instance with VestaCP, specifying the host, port, database user, and password.

```bash
v-add-database-host pgsql localhost postgres pgp4sw0rd

```

--------------------------------

### Add Wildcard DNS Record for Temporary Links

Source: https://vestacp.com/docs/how-to-configure-temporary-links-for-new-domains

Configure a wildcard DNS 'A' record to point to a specific IP address. This is the first step in setting up temporary domain aliases.

```bash
Record: *.alpha
Type: A
IP: 192.168.3.57
```

```bash
Record: *.beta
Type: A
IP: 192.168.3.58
```

--------------------------------

### List User Backups

Source: https://vestacp.com/docs

Retrieves a list of available backups for a specific user. Supports optional formatting.

```bash
v-list-user-backups USER [FORMAT]
```

--------------------------------

### v-add-web-domain-backend

Source: https://vestacp.com/docs/cli

Adds a backend configuration for a user's web domain.

```APIDOC
## v-add-web-domain-backend

### Description
Configures a backend service or application for a specific web domain.

### Method
Not applicable (CLI command)

### Parameters
#### Arguments
- **USER**: The username associated with the domain.
- **DOMAIN**: The domain name for which to add the backend configuration.
#### Options
- **[TEMPLATE]**: Specifies a template to use for the backend configuration.
- **[RESTART]**: Optional flag to restart services after configuration.
```

--------------------------------

### v-add-web-domain-ftp

Source: https://vestacp.com/docs/cli

Adds an FTP account for a web domain.

```APIDOC
## v-add-web-domain-ftp

### Description
Creates an additional FTP account for a web domain.

### Method
CLI Command

### Endpoint
v-add-web-domain-ftp USER DOMAIN FTP_USER FTP_PASSWORD [FTP_PATH]

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username.
- **DOMAIN** (string) - Required - The domain name.
- **FTP_USER** (string) - Required - The username for the new FTP account.
- **FTP_PASSWORD** (string) - Required - The password for the new FTP account.
- **FTP_PATH** (string) - Optional - The path for the FTP account.
```

--------------------------------

### Add Web/DNS/Mail Domain

Source: https://vestacp.com/docs

Adds a new domain to the server, including web, DNS, and mail configurations. Optionally specify an IP address and restart services.

```bash
v-add-domain USER DOMAIN [IP] [RESTART]
```

--------------------------------

### v-add-letsencrypt-domain

Source: https://vestacp.com/docs/cli

Enables SSL support for a domain by adding a Let's Encrypt certificate. Supports optional aliases, restart, and notification.

```APIDOC
## v-add-letsencrypt-domain

### Description
Enables SSL support for a domain by adding a Let's Encrypt certificate. Supports optional aliases, restart, and notification.

### Method
Not specified (CLI command)

### Endpoint
Not applicable (CLI command)

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username.
- **DOMAIN** (string) - Required - The domain name.
- **ALIASES** (string) - Optional - Additional aliases for the certificate.
- **RESTART** (string) - Optional - Flag to restart services.
- **NOTIFY** (string) - Optional - Flag to enable notifications.
```

--------------------------------

### Add FTP Backup Host

Source: https://vestacp.com/docs/how-to-configure-ftp-backup

Use this command to add a remote FTP host for storing backups. Replace the placeholder credentials with your actual FTP server details.

```bash
v-add-backup-ftp-host remote.ftp-host.ltd backup-user p4ssw0rd
```

--------------------------------

### List Vesta Autoupdate Settings

Source: https://vestacp.com/docs

Retrieves the current autoupdate settings for Vesta. Supports optional formatting.

```bash
v-list-sys-vesta-autoupdate [FORMAT]
```

--------------------------------

### v-add-web-domain-ssl

Source: https://vestacp.com/docs/cli

Enables SSL support for a user's web domain.

```APIDOC
## v-add-web-domain-ssl

### Description
Activates SSL/TLS support for a specified web domain. Requires certificate and key files. Optionally accepts a CA certificate file and specifies the document root.

### Method
Not applicable (CLI command)

### Parameters
#### Arguments
- **USER**: The username associated with the domain.
- **DOMAIN**: The domain name for which to enable SSL.
- **SSL_DIR**: The directory containing the SSL certificate and key files.
#### Options
- **[SSL_HOME]**: The directory to use as the document root for HTTPS. Defaults to public_shtml.
- **[RESTART]**: Optional flag to restart services after enabling SSL.
```

--------------------------------

### v-change-web-domain-backend-tpl

Source: https://vestacp.com/docs/cli

Changes the backend template for a web domain. Supports optional restart.

```APIDOC
## v-change-web-domain-backend-tpl

### Description
Changes the backend template for a web domain. Supports optional restart.

### Method
Not specified (CLI command)

### Endpoint
Not applicable (CLI command)

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username.
- **DOMAIN** (string) - Required - The domain name.
- **TEMPLATE** (string) - Required - The new backend template.
- **RESTART** (string) - Optional - Flag to restart services.
```

--------------------------------

### v-schedule-user-restore

Source: https://vestacp.com/docs/cli

Schedules the restoration of a user's backup. Supports specifying which components to restore (web, DNS, mail, DB, cron, user directory).

```APIDOC
## v-schedule-user-restore

### Description
Schedules the restoration of a user's backup. Supports specifying which components to restore (web, DNS, mail, DB, cron, user directory).

### Method
Not specified (CLI command)

### Endpoint
Not applicable (CLI command)

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username.
- **BACKUP** (string) - Required - The backup identifier.
- **WEB** (string) - Optional - Flag to restore web data.
- **DNS** (string) - Optional - Flag to restore DNS data.
- **MAIL** (string) - Optional - Flag to restore mail data.
- **DB** (string) - Optional - Flag to restore database data.
- **CRON** (string) - Optional - Flag to restore cron jobs.
- **UDIR** (string) - Optional - Flag to restore user directory.
```

--------------------------------

### List File System Directory

Source: https://vestacp.com/docs

Lists the contents of a specified directory on the file system for a given user.

```bash
v-list-fs-directory USER DIRECTORY
```

--------------------------------

### Restore User Backup

Source: https://vestacp.com/docs/how-to-migrate-user-to-the-new-server

Restore the user account on the new server using the transferred backup file. The user account will be created if it does not exist.

```bash
v-restore-user admin admin.2014-01-14.tar
```

--------------------------------

### Download WSGI Template

Source: https://vestacp.com/docs/how-to-enable-wsgi-support-on-a-rhel-or-centos

Downloads and extracts the WSGI Apache template from the VestaCP repository. This template is required for WSGI configuration.

```bash
cd /usr/local/vesta/data/templates/web
wget http://c.vestacp.com/0.9.8/rhel/wsgi/httpd.tar.gz
tar -xzvf httpd.tar.gz
rm -f httpd.tar.gz

```

--------------------------------

### v-restart-proxy

Source: https://vestacp.com/docs/cli

Restarts the proxy server, reloading its configuration. Requires no specific options.

```APIDOC
## v-restart-proxy

### Description
Restarts the proxy server, reloading its configuration.

### Method
Not specified (CLI command)

### Parameters
None.
```

--------------------------------

### Download PostgreSQL HBA Configuration

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-rhel-or-centos

Downloads the pg_hba.conf file from a remote URL and saves it to the PostgreSQL data directory. This file controls client authentication.

```bash
wget http://c.vestacp.com/0.9.8/rhel/pg_hba.conf -O /var/lib/pgsql/data/pg_hba.conf

```

--------------------------------

### List System IP Addresses

Source: https://vestacp.com/docs

Retrieves a list of system IP addresses and their parameters. Supports optional formatting.

```bash
v-list-sys-ip IP [FORMAT]
```

--------------------------------

### Download WSGI Apache Template

Source: https://vestacp.com/docs/how-to-enable-wsgi-support-on-a-debian-or-ubuntu

Downloads and extracts the WSGI Apache template files to the VestaCP templates directory. This is required for configuring WSGI support.

```bash
cd /usr/local/vesta/data/templates/web
wget http://c.vestacp.com/0.9.8/ubuntu/wsgi/apache2.tar.gz
tar -xzvf apache2.tar.gz
rm -f apache2.tar.gz
```

--------------------------------

### v-list-dns-templates

Source: https://vestacp.com/docs/cli

Retrieves a list of all available DNS templates. Supports optional formatting.

```APIDOC
## v-list-dns-templates

### Description
Retrieves a list of all available DNS templates. Supports optional formatting.

### Method
Not specified (CLI command)

### Endpoint
Not applicable (CLI command)

### Parameters
#### Path Parameters
- **FORMAT** (string) - Optional - The desired output format.
```

--------------------------------

### List SpamAssassin Configuration

Source: https://vestacp.com/docs

Retrieves a list of SpamAssassin configuration parameters. Output can be formatted.

```bash
v-list-sys-spamd-config [FORMAT]
```

--------------------------------

### Configure Bind for AXFR Zone Transfer

Source: https://vestacp.com/docs/how-to-enable-axfr-in-bind

Modify the named.conf file to allow zone transfers to specific IP addresses and enable also-notify.

```bind
allow-transfer { XXX.YYY.ZZZ.111; XXX.YYY.ZZZ.222; }; 
also-notify { XXX.YYY.ZZZ.111; XXX.YYY.ZZZ.222; };
```

--------------------------------

### v-list-web-templates-proxy

Source: https://vestacp.com/docs/cli

Lists available proxy templates.

```APIDOC
## v-list-web-templates-proxy

### Description
Obtains the list of proxy templates available to a user.

### Method
CLI Command

### Endpoint
v-list-web-templates-proxy [FORMAT]

### Parameters
#### Query Parameters
- **FORMAT** (string) - Optional - Specifies the output format.
```

--------------------------------

### List Overall User Statistics

Source: https://vestacp.com/docs

Retrieves overall statistics for all users. Supports optional formatting.

```bash
v-list-users-stats [FORMAT]
```

--------------------------------

### Copy Backup to New Server

Source: https://vestacp.com/docs/how-to-migrate-user-to-the-new-server

Transfer the generated backup tarball from the old server to the new server's backup directory using SCP. Adjust paths and filenames as necessary.

```bash
scp /home/backup/admin.2014-01-14.tar new-server:/home/backup/
```

--------------------------------

### v-list-sys-dovecot-config

Source: https://vestacp.com/docs/cli

Lists the configuration parameters for the Dovecot mail server.

```APIDOC
## v-list-sys-dovecot-config

### Description
Retrieves a list of all configurable parameters for the Dovecot mail server.

### Method
Not applicable (CLI command)

### Parameters
#### Options
- **[FORMAT]**: Specifies the output format (e.g., json, shell, plain).
```

--------------------------------

### List Firewall Rules

Source: https://vestacp.com/docs

Retrieves a list of all iptables firewall rules. Supports optional formatting.

```bash
v-list-firewall [FORMAT]
```

--------------------------------

### v-list-web-templates

Source: https://vestacp.com/docs/cli

Lists available web templates for a user.

```APIDOC
## v-list-web-templates

### Description
Obtains the list of web templates available to a user.

### Method
CLI Command

### Endpoint
v-list-web-templates USER [FORMAT]

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username.
#### Query Parameters
- **FORMAT** (string) - Optional - Specifies the output format.
```

--------------------------------

### v-list-user-backup

Source: https://vestacp.com/docs/cli

Lists backup parameters for a specific user.

```APIDOC
## v-list-user-backup

### Description
Retrieves a list of backup parameters and configurations for a given user. Supports JSON, shell, and plain text output formats.

### Method
Not applicable (CLI command)

### Parameters
#### Arguments
- **USER**: The username for whom to list backup parameters.
- **BACKUP**: The specific backup identifier or name.
#### Options
- **[FORMAT]**: Specifies the output format (e.g., json, shell, plain).
```

--------------------------------

### Add Remote MySQL Host

Source: https://vestacp.com/docs/how-to-add-remote-mysql-database-server

Use this command to add a new remote MySQL server. Replace 'new-server.com', 'root', and 'password' with your actual server details.

```bash
v-add-database-host mysql new-server.com root password

```

--------------------------------

### List User Favorites

Source: https://vestacp.com/docs

Retrieves a list of favorite user objects. The output format can be specified.

```bash
v-list-user-favourites USER [FORMAT]
```

--------------------------------

### v-change-sys-service-config

Source: https://vestacp.com/docs/cli

Changes the configuration for a system service. Supports optional restart.

```APIDOC
## v-change-sys-service-config

### Description
Changes the configuration for a system service. Supports optional restart.

### Method
Not specified (CLI command)

### Endpoint
Not applicable (CLI command)

### Parameters
#### Path Parameters
- **CONFIG** (string) - Required - The configuration file path.
- **SERVICE** (string) - Required - The service name.
- **RESTART** (string) - Optional - Flag to restart services.
```

--------------------------------

### Restore User

Source: https://vestacp.com/docs

Restores a user account from a backup. Options include restoring web, DNS, mail, database, cron, user directory, and notification settings.

```bash
v-restore-user USER BACKUP [WEB] [DNS] [MAIL] [DB] [CRON] [UDIR] [NOTIFY]
```

--------------------------------

### Template for New Language File

Source: https://vestacp.com/docs/how-to-translate-vesta-interface

Use the existing English language file (en.php) as a template to create a new language file for your desired language. Remember to change the language code (e.g., 'en' to 'aa').

```php
$LANG['en'] = array(
    'some_key' => 'English Translation',
    // ... other translations
);

// To create a new language file (e.g., for 'aa'):
// $LANG['aa'] = array(
//     'some_key' => 'Translation in aa',
//     // ... other translations
// );
```

--------------------------------

### v-add-web-domain-proxy

Source: https://vestacp.com/docs/cli

Enables proxy support for a web domain to improve website speed. Supports USER, DOMAIN, and optional TEMPLATE, EXTENTIONS, and RESTART.

```APIDOC
## v-add-web-domain-proxy

### Description
Enables proxy support for a domain. This can significantly improve website speed.

### Method
Not specified (CLI command)

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username associated with the web domain.
- **DOMAIN** (string) - Required - The web domain for which to enable proxy support.
- **TEMPLATE** (string) - Optional - The proxy template to use.
- **EXTENTIONS** (string) - Optional - Additional extensions to enable.
- **RESTART** (string) - Optional - Whether to restart the proxy service after configuration.
```

--------------------------------

### v-add-web-domain

Source: https://vestacp.com/docs/cli

Adds a virtual host (web domain) to the server. Supports specifying IP, aliases, proxy extensions, and restart.

```APIDOC
## v-add-web-domain

### Description
Adds a virtual host (web domain) to the server. Supports specifying IP, aliases, proxy extensions, and restart.

### Method
Not specified (CLI command)

### Endpoint
Not applicable (CLI command)

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username.
- **DOMAIN** (string) - Required - The domain name.
- **IP** (string) - Optional - The IP address to assign to the domain. Defaults to 'default' template if undefined.
- **ALIASES** (string) - Optional - Aliases for the domain. Use 'none' to disable automatic www alias.
- **PROXY_EXTENSIONS** (string) - Optional - Proxy extensions to enable.
- **RESTART** (string) - Optional - Flag to restart services.
```

--------------------------------

### Restart Operating System

Source: https://vestacp.com/docs

Initiates a restart of the operating system. Requires a restart flag.

```bash
v-restart-system RESTART
```

--------------------------------

### Restart Apache Web Server

Source: https://vestacp.com/docs/how-to-set-up-postgresql-on-a-debian-or-ubuntu

Restarts the Apache web server to load the new phpPgAdmin configuration.

```bash
service apache2 restart

```

--------------------------------

### Add User SFTP Jail

Source: https://vestacp.com/docs/cli

Enables a jailed SFTP environment for a user. Requires the username.

```bash
v-add-user-sftp-jail USER
```

--------------------------------

### v-list-letsencrypt-user

Source: https://vestacp.com/docs/cli

Lists the Let's Encrypt key thumbprint for a user. Supports USER and optional FORMAT.

```APIDOC
## v-list-letsencrypt-user

### Description
Lists the Let's Encrypt key thumbprint for a user.

### Method
Not specified (CLI command)

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username for whom to list the Let's Encrypt key.
- **FORMAT** (string) - Optional - The desired output format.
```

--------------------------------

### v-list-user-ns

Source: https://vestacp.com/docs/cli

Retrieves a list of a user's DNS nameservers. Supports optional formatting.

```APIDOC
## v-list-user-ns

### Description
Retrieves a list of a user's DNS nameservers. Supports optional formatting.

### Method
Not specified (CLI command)

### Endpoint
Not applicable (CLI command)

### Parameters
#### Path Parameters
- **USER** (string) - Required - The username.
- **FORMAT** (string) - Optional - The desired output format.
```

--------------------------------

### Add User Favorites

Source: https://vestacp.com/docs

Adds a system object to a user's favorites list. Requires user, system, and object identifiers.

```bash
v-add-user-favourites USER SYSTEM OBJECT
```