NX Open C++

https://www.ugapi.com/doc/nxopen
Admin
NX Open C++ provides a comprehensive set of APIs and interfaces for developing and customizing...
Tokens:3,431,278
Snippets:28,975
Trust Score:1.8
Update:6 days ago
Show doc for...
Tokens:
Raw
### ChannelGuide()

Source: https://www.ugapi.com/doc/nxopen/a16206.html

Gets the channel guide for the cooling pattern builder.

```APIDOC
## ChannelGuide()

### Description
Gets the channel guide for the cooling pattern builder.

### Method
ChannelGuide

### Parameters
None

### Returns
- **NXOpen::Tooling::CoolingPatternBuilder::ChannelGuide** - The channel guide object.
```

--------------------------------

### StartPercentage()

Source: https://www.ugapi.com/doc/nxopen/a14334.html

Gets the start percentage.

```APIDOC
## StartPercentage()

### Description
Gets the start percentage.

### Method
StartPercentage

```

--------------------------------

### UseStartSectionFile()

Source: https://www.ugapi.com/doc/nxopen/a11113.html

Gets whether to use the start section file.

```APIDOC
## UseStartSectionFile()

### Description
Gets whether to use the start section file.

### Method
UseStartSectionFile

```

--------------------------------

### Setup()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Performs setup operations for kinematic chains and inspection path builders.

```APIDOC
## Setup()

### Description
Performs setup operations for the associated object.

### Method
Setup

### Applies To
- NXOpen::SIM::KinematicChain
- NXOpen::CAM::InspectionCreatePathsBuilder

### Parameters
No parameters documented in source.

### Returns
No return value documented in source.
```

--------------------------------

### StartSectionFile()

Source: https://www.ugapi.com/doc/nxopen/a11113.html

Gets the start section file.

```APIDOC
## StartSectionFile()

### Description
Gets the start section file.

### Method
StartSectionFile

```

--------------------------------

### StartPoint()

Source: https://www.ugapi.com/doc/nxopen/a13429.html

Gets the start point of the teach mode profile move.

```APIDOC
## StartPoint()

### Description
Gets the start point of the teach mode profile move.

### Method
StartPoint

### Parameters
None

### Returns
NXOpen::Point3d - The start point.
```

--------------------------------

### Start

Source: https://www.ugapi.com/doc/nxopen/a13650.html

Starts the rib child builder.

```APIDOC
## Start

### Description
Starts the rib child builder.

### Method
Start

### Returns
- **NXOpen::Die::RibChildBuilder** - The builder object.
```

--------------------------------

### StartOfPath()

Source: https://www.ugapi.com/doc/nxopen/a15957.html

Gets the start of the path for an OverstockApplication.

```APIDOC
## StartOfPath()

### Description
Gets the start of the path for an OverstockApplication.

### Method
StartOfPath

### Returns
NXOpen::Routing::OverstockApplication
```

--------------------------------

### TaperAtStart

Source: https://www.ugapi.com/doc/nxopen/a16586.html

Gets the taper at start value.

```APIDOC
## TaperAtStart()

### Description
Gets the taper at start value.

### Method
TaperAtStart

### Parameters
None

### Returns
NXString - The taper at start value.

```

--------------------------------

### StartUPercent()

Source: https://www.ugapi.com/doc/nxopen/a13228.html

Gets the start U percentage for the inspection surface feature.

```APIDOC
## StartUPercent()

### Description
Gets the start U percentage for the inspection surface feature.

### Method
StartUPercent

### Parameters
None

### Returns
double
```

--------------------------------

### NewGuide()

Source: https://www.ugapi.com/doc/nxopen/functions_0x6e.html

Returns the JointmarkBuilder for guide.

```APIDOC
## NewGuide()

### Description
Returns the JointmarkBuilder for guide.

### Method
NewGuide

### Returns
NXOpen::Weld::JointmarkBuilder
```

--------------------------------

### UserDefinedPunchStart

Source: https://www.ugapi.com/doc/nxopen/a16372.html

Gets the user-defined punch start.

```APIDOC
## UserDefinedPunchStart

### Description
Gets the user-defined punch start.

### Method
UserDefinedPunchStart

### Signature
`double UserDefinedPunchStart()`

### Parameters
None

### Returns
double - The punch start value.
```

--------------------------------

### IsLibrarySetup()

Source: https://www.ugapi.com/doc/nxopen/functions_0x69.html

Checks if the CAM setup is a library setup.

```APIDOC
## IsLibrarySetup()

### Description
Checks if the CAM setup is a library setup.

### Method
IsLibrarySetup

### Endpoint
NXOpen::CAM::CAMSetup::IsLibrarySetup

### Parameters
None

### Response
#### Success Response
- **Returns** (bool) - True if library setup, false otherwise.

#### Response Example
```json
{
  "result": true
}
```
```

--------------------------------

### StartVPercent()

Source: https://www.ugapi.com/doc/nxopen/a13228.html

Gets the start V percentage for the inspection surface feature.

```APIDOC
## StartVPercent()

### Description
Gets the start V percentage for the inspection surface feature.

### Method
StartVPercent

### Parameters
None

### Returns
double
```

--------------------------------

### CreateInspectionSetup

Source: https://www.ugapi.com/doc/nxopen/functions_0x63.html

Creates an inspection setup.

```APIDOC
## CreateInspectionSetup()

### Description
Creates an inspection setup.

### Method
CreateInspectionSetup

### Returns
NXOpen::Part
```

--------------------------------

### StartPositionMethod()

Source: https://www.ugapi.com/doc/nxopen/a13429.html

Gets the start position method of the teach mode profile move builder.

```APIDOC
## StartPositionMethod()

### Description
Gets the start position method of the teach mode profile move builder.

### Method
StartPositionMethod

### Parameters
None

### Returns
NXOpen::CAM::TeachmodeProfileMoveBuilder::StartStopPositionMethods - The start position method.
```

--------------------------------

### Guid

Source: https://www.ugapi.com/doc/nxopen/a15879.html

Gets the GUID of the root object.

```APIDOC
## Guid

### Description
Gets the GUID of the root object.

### Method
N/A (SDK method)

### Signature
`Guid()`

### Returns
- **NXOpen::Routing::RootObject** - The GUID.
```

--------------------------------

### SetUPatches()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets U patches for surface builders.

```APIDOC
## SetUPatches()

### Description
Sets U patches for the surface builder.

### Method
SetUPatches

### Applies To
- NXOpen::Features::RapidSurfaceBuilder
- NXOpen::GeometricUtilities::DegreesAndSegmentsOrPatchesBuilder

### Parameters
No parameters documented in source.

### Returns
No return value documented in source.
```

--------------------------------

### StartDistance()

Source: https://www.ugapi.com/doc/nxopen/a14334.html

Gets the start distance.

```APIDOC
## StartDistance()

### Description
Gets the start distance.

### Method
StartDistance

```

--------------------------------

### BeginTaskEnvironment()

Source: https://www.ugapi.com/doc/nxopen/functions_0x62.html

Begins a task environment in the NXOpen Session.

```APIDOC
## BeginTaskEnvironment()

### Description
Begins a task environment in the NXOpen Session.

### Method
BeginTaskEnvironment

### Returns
- **NXOpen::Session** - The session object.

```

--------------------------------

### DmCmStartCutToolAxisGuideVector()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x64.html

Returns the start cut tool axis guide vector for a DM CM builder.

```APIDOC
## DmCmStartCutToolAxisGuideVector()

### Description
Returns the start cut tool axis guide vector for a DM CM builder.

### Method
Function

### Signature
`DmCmStartCutToolAxisGuideVector() : NXOpen::CAM::DmCmBuilder`

### Returns
- **NXOpen::CAM::DmCmBuilder** - The DM CM builder.
```

--------------------------------

### CreateCamSetup()

Source: https://www.ugapi.com/doc/nxopen/functions_0x63.html

Creates a CAM setup in the Part.

```APIDOC
## CreateCamSetup()

### Description
Creates a CAM setup.

### Return Type
NXOpen::Part

### Owner
NXOpen::Part
```

--------------------------------

### StartOffset()

Source: https://www.ugapi.com/doc/nxopen/a13397.html

Gets the start offset.

```APIDOC
## StartOffset()

### Description
Gets the start offset.

### Method
StartOffset

### Parameters
None

### Returns
double
```

--------------------------------

### CreateWireGuide()

Source: https://www.ugapi.com/doc/nxopen/functions_0x63.html

Creates a wire guide in the CAM wire tool.

```APIDOC
## CreateWireGuide()

### Description
Creates a wire guide.

### Return Type
NXOpen::CAM::WireTool
```

--------------------------------

### ShowSetting()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Returns a PocketBuilder for displaying setting.

```APIDOC
## ShowSetting()

### Description
Returns a PocketBuilder for displaying setting.

### Method
ShowSetting

### Return Type
NXOpen::Tooling::PocketBuilder
```

--------------------------------

### StartPoint()

Source: https://www.ugapi.com/doc/nxopen/a15060.html

Gets the start point of the motion.

```APIDOC
## StartPoint()

### Description
Gets the start point of the motion.

### Method
StartPoint

### Returns
- **NXOpen::Point*** - The start point.

```

--------------------------------

### StartUdeSet()

Source: https://www.ugapi.com/doc/nxopen/a13254.html

Starts the UDE set for the laser teach mode operation builder.

```APIDOC
## StartUdeSet()

### Description
Starts the UDE set for the laser teach mode operation builder.

### Method
StartUdeSet

### Returns
- **NXOpen::CAM::OperationBuilder** - The operation builder for the UDE set.
```

--------------------------------

### SetUparameter1

Source: https://www.ugapi.com/doc/nxopen/a16621.html

Sets the first U parameter.

```APIDOC
## SetUparameter1

### Description
Sets the first U parameter.

### Method
SetUparameter1

### Parameters
- **u1** (double) - Required - The first U parameter.

### Returns
void
```

--------------------------------

### StartPercentageSection()

Source: https://www.ugapi.com/doc/nxopen/a14277.html

Returns the start percentage section. This method is part of the PointSetBuilder class and is used to get the section for start percentage.

```APIDOC
## StartPercentageSection()

### Description
Returns the start percentage section. This method is part of the PointSetBuilder class and is used to get the section for start percentage.

### Method
StartPercentageSection

### Parameters
None

### Returns
NXOpen::Section - The section for start percentage.
```

--------------------------------

### InspectionSetup()

Source: https://www.ugapi.com/doc/nxopen/a11221.html

Returns the inspection setup of the part.

```APIDOC
## InspectionSetup()

### Description
Returns the inspection setup of the part.

### Method
InspectionSetup

### Returns
- **NXOpen::Part** - The inspection setup.
```

--------------------------------

### StartOfPath()

Source: https://www.ugapi.com/doc/nxopen/a13154.html

Starts the path for the operation.

```APIDOC
## StartOfPath()

### Description
Starts the path for the operation.

### Method
StartOfPath

### Parameters
None

### Returns
void
```

--------------------------------

### RetrieveDevice()

Source: https://www.ugapi.com/doc/nxopen/functions_0x72.html

Method of NXOpen::CAM::CAMSetup and NXOpen::CAM::InspectionSetup. Retrieves the device.

```APIDOC
## RetrieveDevice()

### Description
Method of NXOpen::CAM::CAMSetup and NXOpen::CAM::InspectionSetup. Retrieves the device.

### Return Type
NXOpen::CAM::CAMSetup, NXOpen::CAM::InspectionSetup, NXOpen::CAM::CAMSetup
```

--------------------------------

### StartPercentage()

Source: https://www.ugapi.com/doc/nxopen/a14277.html

Returns the start percentage. This method is part of the PointSetBuilder class and is used to get the start percentage for point generation.

```APIDOC
## StartPercentage()

### Description
Returns the start percentage. This method is part of the PointSetBuilder class and is used to get the start percentage for point generation.

### Method
StartPercentage

### Parameters
None

### Returns
double - The start percentage.
```

--------------------------------

### StartPointOfOverstock()

Source: https://www.ugapi.com/doc/nxopen/a15957.html

Gets the start point of the overstock for an OverstockApplication.

```APIDOC
## StartPointOfOverstock()

### Description
Gets the start point of the overstock for an OverstockApplication.

### Method
StartPointOfOverstock

### Returns
NXOpen::Routing::OverstockApplication
```

--------------------------------

### ExtrudeSetups()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x65.html

Returns a LaminateGlobalLayupMgr object for extrude setups.

```APIDOC
## ExtrudeSetups()

### Description
Returns an NXOpen::CAE::LaminateGlobalLayupMgr object.

### Returns
- **NXOpen::CAE::LaminateGlobalLayupMgr** - The manager object.
```

--------------------------------

### StartRadius2()

Source: https://www.ugapi.com/doc/nxopen/a14497.html

Gets the start radius for the second side.

```APIDOC
## StartRadius2()

### Description
Gets the start radius for the second side.

### Method
StartRadius2

### Parameters
None

### Returns
- **double** - The start radius value.
```

--------------------------------

### StartRadius1()

Source: https://www.ugapi.com/doc/nxopen/a14497.html

Gets the start radius for the first side.

```APIDOC
## StartRadius1()

### Description
Gets the start radius for the first side.

### Method
StartRadius1

### Parameters
None

### Returns
- **double** - The start radius value.
```

--------------------------------

### GuideRebuild()

Source: https://www.ugapi.com/doc/nxopen/functions_0x67.html

Returns a builder object for guide rebuild operations. Available on StudioSurfaceBuilder.

```APIDOC
## GuideRebuild()

### Description
Returns a builder object for guide rebuild operations. Available on StudioSurfaceBuilder.

### Method
GuideRebuild()

### Returns
- NXOpen::Features::StudioSurfaceBuilder
```

--------------------------------

### TopCurveStartPoint()

Source: https://www.ugapi.com/doc/nxopen/a14388.html

Gets the top curve start point.

```APIDOC
## TopCurveStartPoint()

### Description
Gets the top curve start point.

### Method
TopCurveStartPoint

### Parameters
None

### Returns
Point

```

--------------------------------

### StartUdeSet()

Source: https://www.ugapi.com/doc/nxopen/a13020.html

Starts a UDE set for the operation.

```APIDOC
## StartUdeSet()

### Description
Starts a UDE set for the operation.

### Method
StartUdeSet()

```

--------------------------------

### GetParent

Source: https://www.ugapi.com/doc/nxopen/a13559.html

Gets the parent operation from a CAM setup view.

```APIDOC
## GetParent

### Description
Gets the parent operation from a CAM setup view.

### Method
GetParent

### Parameters
- **branch** (NXOpen::CAM::CAMSetup::View) - Required - The view branch.

### Returns
- **NXOpen::CAM::Operation** - The parent operation.
```

--------------------------------

### StartStopBeforeBoundaryOffset()

Source: https://www.ugapi.com/doc/nxopen/a13429.html

Gets the start stop before boundary offset value.

```APIDOC
## StartStopBeforeBoundaryOffset()

### Description
Gets the start stop before boundary offset value.

### Method
StartStopBeforeBoundaryOffset

### Parameters
None

### Returns
double - The offset value.
```

--------------------------------

### CreateLaminateExtrudeSetupBuilder()

Source: https://www.ugapi.com/doc/nxopen/functions_0x63.html

Creates a laminate extrude setup builder.

```APIDOC
## CreateLaminateExtrudeSetupBuilder()

### Description
Creates a laminate extrude setup builder.

### Method
CreateLaminateExtrudeSetupBuilder

### Return Type
NXOpen::CAE::LaminateGlobalLayupMgr

### Provider
NXOpen::CAE::LaminateGlobalLayupMgr
```

--------------------------------

### SetHelpPoint(NXOpen::Point *helpPoint)

Source: https://www.ugapi.com/doc/nxopen/a14109.html

Sets a help point to guide the blend creation.

```APIDOC
## SetHelpPoint(NXOpen::Point *helpPoint)

### Description
Sets a help point to guide the blend creation.

### Method
SetHelpPoint

### Parameters
- **helpPoint** (NXOpen::Point*) - Required - The help point.

### Returns
void
```

--------------------------------

### CreateLaminateFillSetupBuilder()

Source: https://www.ugapi.com/doc/nxopen/functions_0x63.html

Creates a laminate fill setup builder.

```APIDOC
## CreateLaminateFillSetupBuilder()

### Description
Creates a laminate fill setup builder.

### Method
CreateLaminateFillSetupBuilder

### Return Type
NXOpen::CAE::LaminateGlobalLayupMgr

### Provider
NXOpen::CAE::LaminateGlobalLayupMgr
```

--------------------------------

### GetStartAndDirection(NXOpen::ICurve **startElement, NXOpen::Point3d *startPoint, NXOpen::Vector3d *direction)

Source: https://www.ugapi.com/doc/nxopen/a11295.html

Gets the start element, start point, and direction of the section.

```APIDOC
## GetStartAndDirection(NXOpen::ICurve **startElement, NXOpen::Point3d *startPoint, NXOpen::Vector3d *direction)

### Description
Gets the start element, start point, and direction of the section.

### Method
GetStartAndDirection

### Parameters
- **startElement** (NXOpen::ICurve**) - Required - The start element.
- **startPoint** (NXOpen::Point3d*) - Required - The start point.
- **direction** (NXOpen::Vector3d*) - Required - The direction.

### Returns
NXOpen::Section
```

--------------------------------

### StartPlane()

Source: https://www.ugapi.com/doc/nxopen/a14723.html

Gets the start plane. This method is part of the SteelSupportBuilder class.

```APIDOC
## StartPlane()

### Description
Gets the start plane.

### Method
StartPlane

### Parameters
None

### Returns
NXOpen::Plane* - The start plane.

```

--------------------------------

### ReliefStart()

Source: https://www.ugapi.com/doc/nxopen/functions_0x72.html

Returns the relief start for a relief design builder.

```APIDOC
## ReliefStart()

### Description
Returns the relief start for a relief design builder.

### Return Type
- NXOpen::Tooling::ReliefDesignBuilder

### Belongs To
- NXOpen::Tooling::ReliefDesignBuilder
```

--------------------------------

### StartOffset()

Source: https://www.ugapi.com/doc/nxopen/a14723.html

Gets the start offset. This method is part of the SteelSupportBuilder class.

```APIDOC
## StartOffset()

### Description
Gets the start offset.

### Method
StartOffset

### Parameters
None

### Returns
double - The start offset.

```

--------------------------------

### InitializeMenuApplication - NXOpen::MenuBar::MenuBarManager

Source: https://www.ugapi.com/doc/nxopen/functions_type_0x69.html

Initializes a menu application.

```APIDOC
## InitializeMenuApplication

### Description
Initializes a menu application.

### Method
Function

### Class
NXOpen::MenuBar::MenuBarManager
```

--------------------------------

### StartTangent()

Source: https://www.ugapi.com/doc/nxopen/a13982.html

Method to get or set the start tangent for the associative line.

```APIDOC
## StartTangent()

### Description
Gets or sets the start tangent for the associative line. This is used when the start option is set to `StartOptionTangent`.

### Method
- **StartTangent()** - Returns the start tangent object.

### Parameters
None.

### Returns
- **Object** - The start tangent.
```

--------------------------------

### ShowGuides

Source: https://www.ugapi.com/doc/nxopen/functions_0x73.html

Shows guides in post animation streamline. This method is part of the NXOpen.CAE.Post.AnimationStreamline class.

```APIDOC
## ShowGuides

### Description
Shows guides in post animation streamline.

### Method
ShowGuides

### Return Type
NXOpen::CAE::Post::AnimationStreamline

### Class
NXOpen::CAE::Post::AnimationStreamline
```

--------------------------------

### Configuration()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x63.html

Gets or sets the configuration in tooling init project builder.

```APIDOC
## Configuration()

### Description
Gets or sets the configuration in tooling init project builder.

### Method
N/A (Property)

### Endpoint
NXOpen::Tooling::InitProjectBuilder

### Parameters
None

### Response
Returns the configuration.
```

--------------------------------

### StartReferenceCsys()

Source: https://www.ugapi.com/doc/nxopen/a13982.html

Method to get or set the coordinate system for the start reference.

```APIDOC
## StartReferenceCsys()

### Description
Gets or sets the coordinate system used for the start reference when `StartReference` is set to `StartReferenceCordinatesSystem`.

### Method
- **StartReferenceCsys()** - Returns the coordinate system object.

### Parameters
None.

### Returns
- **CoordinateSystem** - The coordinate system for the start reference.
```

--------------------------------

### StartPoint()

Source: https://www.ugapi.com/doc/nxopen/a13982.html

Method to get or set the start point of the associative line.

```APIDOC
## StartPoint()

### Description
Gets or sets the start point of the associative line. The start point is used when the start option is set to `StartOptionPoint`.

### Method
- **StartPoint()** - Returns the start point object.

### Parameters
None.

### Returns
- **Point** - The start point of the line.
```

--------------------------------

### NewWindowSetting()

Source: https://www.ugapi.com/doc/nxopen/functions_0x6e.html

Creates a new Preference for window settings.

```APIDOC
## NewWindowSetting()

### Description
Creates a new Preference for window settings.

### Method
Function

### Return Type
NXOpen::CAE::Xyplot::Preference
```

--------------------------------

### GuideRebuildData()

Source: https://www.ugapi.com/doc/nxopen/functions_0x67.html

Returns a data object for guide rebuild. Available on StyledSweepBuilder and SweptBuilder.

```APIDOC
## GuideRebuildData()

### Description
Returns a data object for guide rebuild. Available on StyledSweepBuilder and SweptBuilder.

### Method
GuideRebuildData()

### Returns
- NXOpen::Features::StyledSweepBuilder
- NXOpen::Features::SweptBuilder
```

--------------------------------

### StartPoint()

Source: https://www.ugapi.com/doc/nxopen/a13425.html

Gets the start point of a tab point data builder.

```APIDOC
## StartPoint()

### Description
Returns the start point of the tab point data builder.

### Method
StartPoint

### Returns
NXOpen::CAM::TabPointDataBuilder
```

--------------------------------

### SetUPatches(int patchesU)

Source: https://www.ugapi.com/doc/nxopen/a14292.html

Sets the number of U patches for the rapid surface builder.

```APIDOC
## SetUPatches(int patchesU)

### Description
Sets the number of U patches for the rapid surface builder.

### Method
SetUPatches

### Parameters
- **patchesU** (int) - Required - The number of U patches.

```

--------------------------------

### StartVDistance()

Source: https://www.ugapi.com/doc/nxopen/a13228.html

Gets the start V distance for the inspection surface feature.

```APIDOC
## StartVDistance()

### Description
Gets the start V distance for the inspection surface feature.

### Method
StartVDistance

### Parameters
None

### Returns
double
```

--------------------------------

### SetUparameter1()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets the first U parameter for weld builders.

```APIDOC
## SetUparameter1()

### Description
Sets the first U parameter for the weld builder.

### Method
SetUparameter1

### Applies To
- NXOpen::Weld::FilletBuilder
- NXOpen::Weld::WeldGrooveBuilder

### Parameters
No parameters documented in source.

### Returns
No return value documented in source.
```

--------------------------------

### begin()

Source: https://www.ugapi.com/doc/nxopen/a03222.html

Returns an iterator addressing the first element of the collection.

```APIDOC
## begin()

### Description
Returns an iterator addressing the first element of the collection.

### Method
begin

### Syntax
iterator begin()

### Returns
- **iterator** - Iterator addressing the first element.

```

--------------------------------

### StartUDistance()

Source: https://www.ugapi.com/doc/nxopen/a13228.html

Gets the start U distance for the inspection surface feature.

```APIDOC
## StartUDistance()

### Description
Gets the start U distance for the inspection surface feature.

### Method
StartUDistance

### Parameters
None

### Returns
double
```

--------------------------------

### SetUpdateDisp()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets the update display for optimization and design study builders.

```APIDOC
## SetUpdateDisp()

### Description
Sets the update display for the optimization or design study builder.

### Method
SetUpdateDisp

### Applies To
- NXOpen::Optimization::OptimizationBuilder
- NXOpen::Optimization::DesignStudyBuilder

### Parameters
No parameters documented in source.

### Returns
No return value documented in source.
```

--------------------------------

### StartOffset()

Source: https://www.ugapi.com/doc/nxopen/a13120.html

Gets the start offset of the rough finish turning operation.

```APIDOC
## StartOffset()

### Description
Gets the start offset of the rough finish turning operation.

### Method
StartOffset

### Parameters
None

### Returns
double
```

--------------------------------

### StartAngle()

Source: https://www.ugapi.com/doc/nxopen/a13120.html

Gets the start angle of the rough finish turning operation.

```APIDOC
## StartAngle()

### Description
Gets the start angle of the rough finish turning operation.

### Method
StartAngle

### Parameters
None

### Returns
double
```

--------------------------------

### Initialize - NXOpen::BlockStyler::BlockDialog

Source: https://www.ugapi.com/doc/nxopen/functions_type_0x69.html

Initializes the block dialog.

```APIDOC
## Initialize

### Description
Initializes the block dialog.

### Method
Function

### Class
NXOpen::BlockStyler::BlockDialog
```

--------------------------------

### StartCapType()

Source: https://www.ugapi.com/doc/nxopen/a14723.html

Gets the start cap type. This method is part of the SteelSupportBuilder class.

```APIDOC
## StartCapType()

### Description
Gets the start cap type.

### Method
StartCapType

### Parameters
None

### Returns
int - The start cap type.

```

--------------------------------

### SetUparameter2

Source: https://www.ugapi.com/doc/nxopen/a16621.html

Sets the second U parameter.

```APIDOC
## SetUparameter2

### Description
Sets the second U parameter.

### Method
SetUparameter2

### Parameters
- **u2** (double) - Required - The second U parameter.

### Returns
void
```

--------------------------------

### StartCapThickness()

Source: https://www.ugapi.com/doc/nxopen/a14723.html

Gets the start cap thickness. This method is part of the SteelSupportBuilder class.

```APIDOC
## StartCapThickness()

### Description
Gets the start cap thickness.

### Method
StartCapThickness

### Parameters
None

### Returns
int - The start cap thickness.

```

--------------------------------

### StartCheckFaceStock()

Source: https://www.ugapi.com/doc/nxopen/a13429.html

Starts checking face stock for the teach mode profile move builder.

```APIDOC
## StartCheckFaceStock()

### Description
Starts checking face stock for the teach mode profile move builder.

### Method
StartCheckFaceStock

### Parameters
None

### Returns
void
```

--------------------------------

### StartCapSize()

Source: https://www.ugapi.com/doc/nxopen/a14723.html

Gets the start cap size. This method is part of the SteelSupportBuilder class.

```APIDOC
## StartCapSize()

### Description
Gets the start cap size.

### Method
StartCapSize

### Parameters
None

### Returns
int - The start cap size.

```

--------------------------------

### StartPointReference()

Source: https://www.ugapi.com/doc/nxopen/a13982.html

Method to get or set the start point reference for the associative line.

```APIDOC
## StartPointReference()

### Description
Gets or sets the start point reference for the associative line. This is used when the start option is set to `StartOptionNormal` or `StartOptionTangent`.

### Method
- **StartPointReference()** - Returns the start point reference object.

### Parameters
None.

### Returns
- **Point** - The start point reference.
```

--------------------------------

### StartPointOptions()

Source: https://www.ugapi.com/doc/nxopen/a13982.html

Method to get or set the start point option for the associative line.

```APIDOC
## StartPointOptions()

### Description
Gets or sets the start point option for the associative line. The option determines how the start point is defined (e.g., Inferred, Normal, Point, Tangent).

### Method
- **StartPointOptions()** - Returns the start point option.

### Parameters
None.

### Returns
- **StartOption** - The start point option enum value.
```

--------------------------------

### SetUpperBase()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets the upper base for a trim flange die assistant builder.

```APIDOC
## SetUpperBase()

### Description
Sets the upper base for the trim flange die assistant builder.

### Method
SetUpperBase

### Applies To
- NXOpen::Die::TrimFlangeDieAssistantBuilder

### Parameters
No parameters documented in source.

### Returns
No return value documented in source.
```

--------------------------------

### StartUdeSet

Source: https://www.ugapi.com/doc/nxopen/a13089.html

Starts a UDE set for an NC group builder.

```APIDOC
## StartUdeSet

### Description
Starts a UDE set for an NC group builder.

### Method
StartUdeSet

### Parameters
None

### Returns
void
```

--------------------------------

### SetUpVector(NXOpen::Direction *upVector)

Source: https://www.ugapi.com/doc/nxopen/a13693.html

Sets the up vector for the decal.

```APIDOC
## SetUpVector(NXOpen::Direction *upVector)

### Description
Sets the up vector for the decal.

### Method
SetUpVector

### Parameters
- **upVector** (NXOpen::Direction *) - Required - The up vector direction.

### Returns
void
```

--------------------------------

### StartPointsUseEffectDist()

Source: https://www.ugapi.com/doc/nxopen/a13321.html

Method on NXOpen::CAM::NcmSubopBuilder to set or get the use effect distance for start points.

```APIDOC
## StartPointsUseEffectDist()

### Description
Method on NXOpen::CAM::NcmSubopBuilder to set or get the use effect distance for start points.

### Method
StartPointsUseEffectDist

### Class
NXOpen::CAM::NcmSubopBuilder

### Parameters
None documented.

### Returns
None documented.
```

--------------------------------

### EntryPoint()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x65.html

Returns an NXOpen::CAM::InspectionMethodBuilder object.

```APIDOC
## EntryPoint()

### Description
Returns an NXOpen::CAM::InspectionMethodBuilder object.

### Method
EntryPoint

### Return Type
NXOpen::CAM::InspectionMethodBuilder
```

--------------------------------

### StartPoint()

Source: https://www.ugapi.com/doc/nxopen/a14514.html

Gets the start point of the flexible cable. This method is part of the NXOpen::Features::SheetMetal::FlexibleCableBuilder class.

```APIDOC
## StartPoint()

### Description
Gets the start point of the flexible cable.

### Method
StartPoint

### Parameters
None

### Returns
NXOpen::Point3d
```

--------------------------------

### VStartMode()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x76.html

Returns an InspectionMethodBuilder for the start mode. Used in CAM inspection methods.

```APIDOC
## VStartMode()

### Description
Returns an InspectionMethodBuilder for the start mode.

### Returns
- **NXOpen::CAM::InspectionMethodBuilder** - the builder for the inspection method.
```

--------------------------------

### CreateQuickBinderBuilder()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x63.html

Creates a quick binder builder.

```APIDOC
## CreateQuickBinderBuilder()

### Description
Creates a quick binder builder.

### Returns
- **NXOpen::Die::DieCollection** - The created collection.
```

--------------------------------

### GetStartAndDirectionOfLoop(int index, NXOpen::Point3d *startPoint, NXOpen::Vector3d *direction)

Source: https://www.ugapi.com/doc/nxopen/a11295.html

Gets the start point and direction of a loop by index.

```APIDOC
## GetStartAndDirectionOfLoop(int index, NXOpen::Point3d *startPoint, NXOpen::Vector3d *direction)

### Description
Gets the start point and direction of a loop by index.

### Method
GetStartAndDirectionOfLoop

### Parameters
- **index** (int) - Required - The loop index.
- **startPoint** (NXOpen::Point3d*) - Required - The start point.
- **direction** (NXOpen::Vector3d*) - Required - The direction.

### Returns
NXOpen::Section
```

--------------------------------

### ExtrudeStart()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x65.html

Returns a BendInsertDesignBuilder object for extrude start.

```APIDOC
## ExtrudeStart()

### Description
Returns an NXOpen::Tooling::BendInsertDesignBuilder object.

### Returns
- **NXOpen::Tooling::BendInsertDesignBuilder** - The builder object.
```

--------------------------------

### NXOpen::CAM::HubFinish::CutStart

Source: https://www.ugapi.com/doc/nxopen/a13155.html

Gets the cut start setting for the hub finish operation. This method is part of the NXOpen::CAM::HubFinish class.

```APIDOC
## NXOpen::CAM::HubFinish::CutStart

### Description
Gets the cut start setting for the hub finish operation.

### Method
CutStart()

### Returns
- **CutStart** (NXOpen::CAM::CutStart::Types) - The cut start type.

```

--------------------------------

### LinkCallback : NXOpen::UserDefinedObjects::UserDefinedClass

Source: https://www.ugapi.com/doc/nxopen/functions_type_0x6c.html

The LinkCallback function is a member of the NXOpen::UserDefinedObjects::UserDefinedClass class. It is listed in the NX Open C++ Reference Guide under functions starting with 'l'.

```APIDOC
## LinkCallback

### Description
The LinkCallback function is a member of the NXOpen::UserDefinedObjects::UserDefinedClass class. It is listed in the NX Open C++ Reference Guide under functions starting with 'l'.

### Class
NXOpen::UserDefinedObjects::UserDefinedClass

### Namespace
NXOpen::UserDefinedObjects

### Function Name
LinkCallback
```

--------------------------------

### GetStart()

Source: https://www.ugapi.com/doc/nxopen/functions_0x67.html

Returns the RibChildBuilder object for start.

```APIDOC
## GetStart()

### Description
Returns the RibChildBuilder object for start.

### Method
GetStart

### Return Type
NXOpen::Die::RibChildBuilder

### Namespace
NXOpen::Die

```

--------------------------------

### Guid

Source: https://www.ugapi.com/doc/nxopen/a15924.html

Retrieves the GUID of the object.

```APIDOC
## Guid

### Description
Retrieves the GUID of the object.

### Method
Guid

### Signature
- `Guid()`

### Returns
- The GUID (type not specified in source).
```

--------------------------------

### SetStartStation()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets the start station for tooling builders.

```APIDOC
## SetStartStation()

### Description
Sets the start station for the associated tooling builder.

### Method
SetStartStation()

### Applies To
- NXOpen::Tooling::DirectUnfoldBuilder
- NXOpen::Tooling::IntermediateStageBuilder
```

--------------------------------

### NXOpen::CAM::NCGroupBuilder::StartUdeSet()

Source: https://www.ugapi.com/doc/nxopen/a13314.html

Starts a UDE (User Defined Event) set.

```APIDOC
## StartUdeSet()

### Description
Starts a UDE (User Defined Event) set.
```

--------------------------------

### Guid

Source: https://www.ugapi.com/doc/nxopen/a15846.html

Retrieves the GUID of a routing root object.

```APIDOC
## Guid

### Description
Retrieves the GUID of the routing root object.

### Method
Guid

### Signature
- `Guid()`

### Returns
- The GUID as a string.
```

--------------------------------

### SetupFacePairInContext()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets up face pairs in context for a mid-surface by face pairs builder.

```APIDOC
## SetupFacePairInContext()

### Description
Sets up face pairs in context for the mid-surface by face pairs builder.

### Method
SetupFacePairInContext

### Applies To
- NXOpen::Features::MidSurfaceByFacePairsBuilder

### Parameters
No parameters documented in source.

### Returns
No return value documented in source.
```

--------------------------------

### SetGuid(const NXString &guid)

Source: https://www.ugapi.com/doc/nxopen/a16104.html

Sets the GUID of the object.

```APIDOC
## SetGuid(const NXString &guid)

### Description
Sets the GUID of the object.

### Method
SetGuid

### Parameters
- **guid** (const NXString&) - Required - The GUID to set.

### Returns
- **NXOpen::Routing::RootObject** - The result.
```

--------------------------------

### OrientationGuide()

Source: https://www.ugapi.com/doc/nxopen/functions_0x6f.html

Returns the orientation guide for SectionSurfaceBuilder.

```APIDOC
## OrientationGuide()

### Description
Returns the orientation guide for SectionSurfaceBuilder.

### Returns
- NXOpen::Features::SectionSurfaceBuilder
```

--------------------------------

### Guid()

Source: https://www.ugapi.com/doc/nxopen/a15952.html

Returns the GUID of the object. Inherited from NXOpen::Routing::RootObject.

```APIDOC
## Guid()

### Description
Returns the GUID of the object.

### Method
Guid

### Return Type
NXOpen::Routing::RootObject

### Parameters
None

### Response
Returns the GUID.
```

--------------------------------

### NewWindow()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x6e.html

Creates a new window.

```APIDOC
## NewWindow()

### Description
Creates a new window.

### Method
Factory method

### Return Type
NXOpen::CAE::Xyplot::WindowManager
```

--------------------------------

### SetGuid(const NXString &guid)

Source: https://www.ugapi.com/doc/nxopen/a15943.html

Sets the GUID of the root object.

```APIDOC
## SetGuid(const NXString &guid)

### Description
Sets the GUID of the root object.

### Method
SetGuid

### Parameters
- **guid** (NXString) - Required - The GUID to set.

### Returns
NXOpen::Routing::RootObject
```

--------------------------------

### NewGuide()

Source: https://www.ugapi.com/doc/nxopen/a16593.html

Creates a new guide curve in the joint mark builder.

```APIDOC
## NewGuide()

### Description
Creates a new guide curve in the joint mark builder.

### Method
NewGuide

### Returns
NXOpen::Weld::Guide
```

--------------------------------

### RelativeStartBlendStartPoint()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x72.html

Returns the relative start blend start point for the AestheticFaceBlendBuilder.

```APIDOC
## RelativeStartBlendStartPoint()

### Description
Returns the relative start blend start point for the AestheticFaceBlendBuilder.

### Method
GET

### Endpoint
NXOpen::Features::AestheticFaceBlendBuilder

### Parameters
None

### Response
#### Success Response (200)
- **relativeStartBlendStartPoint** (object) - The relative start blend start point.

#### Response Example
{
  "relativeStartBlendStartPoint": {}
}
```

--------------------------------

### SetStartAndDirection

Source: https://www.ugapi.com/doc/nxopen/a11295.html

Sets the start element, start point, and direction for the section.

```APIDOC
## SetStartAndDirection

### Description
Sets the start element, start point, and direction for the section.

### Method
SetStartAndDirection

### Signature
`void SetStartAndDirection(NXOpen::ICurve *startElement, const NXOpen::Point3d &startPoint, const NXOpen::Vector3d &direction)`

### Parameters
- **startElement** (NXOpen::ICurve*) - Required - The start element.
- **startPoint** (NXOpen::Point3d) - Required - The start point.
- **direction** (NXOpen::Vector3d) - Required - The direction.

### Returns
void
```

--------------------------------

### OutputClsf()

Source: https://www.ugapi.com/doc/nxopen/functions_0x6f.html

Returns the CAMSetup object associated with the OutputClsf method.

```APIDOC
## OutputClsf()

### Description
Returns the `NXOpen::CAM::CAMSetup` object.

### Method
Property accessor

### Returns
- **NXOpen::CAM::CAMSetup** - The CAM setup object.
```

--------------------------------

### SetStartPoint()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets the start point for various builders and geometric utilities.

```APIDOC
## SetStartPoint()

### Description
Sets the start point for the associated builder or utility.

### Method
SetStartPoint()

### Applies To
- NXOpen::AutomaticTraceline
- NXOpen::CAM::TabPointDataBuilder
- NXOpen::CAM::TurnAvoidanceStartBuilder
- NXOpen::Features::SheetMetal::FlexibleCableBuilder
- NXOpen::GeometricUtilities::SelectDividingObjectBuilder
- NXOpen::GeometricUtilities::SplineExtensionBuilder
- NXOpen::Line
- NXOpen::SketchConicBuilder
- NXOpen::CAE::LaminateDrapingDataBuilder
- NXOpen::CAE::ResponseSimulation::ResponseResultsEvaluationSettingBuilder
- NXOpen::CAM::TeachmodeProfileMoveBuilder
- NXOpen::Features::SweptVolumeBuilder
- NXOpen::GeometricUtilities::CurveExtensionBuilder
- NXOpen::Tooling::CoolingConnectBuilder
- NXOpen::Routing::HealPath
- NXOpen::GeometricUtilities::ModlMotion
- NXOpen::Features::GeneralConicBuilder
- NXOpen::CAM::FollowGeometryMoveBuilder
- NXOpen::Annotations::RegionBuilder
- NXOpen::Tooling::CoolingDefineChannelBuilder
```

--------------------------------

### ChangeGuideLineDirectionAndLength()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x63.html

Changes the guide line direction and length for the guided extension builder.

```APIDOC
## ChangeGuideLineDirectionAndLength()

### Description
Changes the guide line direction and length for the guided extension builder.

### Applies to
- NXOpen::Tooling::GuidedExtensionBuilder

```

--------------------------------

### EntryMethodOption()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x65.html

Returns an NXOpen::CAE::ResponseSimulation::InitialConditions object.

```APIDOC
## EntryMethodOption()

### Description
Returns an NXOpen::CAE::ResponseSimulation::InitialConditions object.

### Method
EntryMethodOption

### Return Type
NXOpen::CAE::ResponseSimulation::InitialConditions
```

--------------------------------

### SetGuid(const char *guid)

Source: https://www.ugapi.com/doc/nxopen/a15982.html

Sets the GUID of this routing root object.

```APIDOC
## SetGuid(const char *guid)

### Description
Sets the GUID of this routing root object.

### Method
SetGuid

### Parameters
- **guid** (const char*) - Required - The GUID to set.

### Return Type
NXOpen::Routing::RootObject

```

--------------------------------

### SetGuid(const NXString &guid)

Source: https://www.ugapi.com/doc/nxopen/a15982.html

Sets the GUID of this routing root object.

```APIDOC
## SetGuid(const NXString &guid)

### Description
Sets the GUID of this routing root object.

### Method
SetGuid

### Parameters
- **guid** (NXString) - Required - The GUID to set.

### Return Type
NXOpen::Routing::RootObject

```

--------------------------------

### EngageInitialOpenBuilder()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x65.html

Returns an NXOpen::CAM::NcmPlanarBuilder object.

```APIDOC
## EngageInitialOpenBuilder()

### Description
Returns an NXOpen::CAM::NcmPlanarBuilder object.

### Method
EngageInitialOpenBuilder

### Return Type
NXOpen::CAM::NcmPlanarBuilder
```

--------------------------------

### EngageFirstPlungeBuilder()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x65.html

Returns an NXOpen::CAM::NcmTurnRoughBuilder object.

```APIDOC
## EngageFirstPlungeBuilder()

### Description
Returns an NXOpen::CAM::NcmTurnRoughBuilder object.

### Method
EngageFirstPlungeBuilder

### Return Type
NXOpen::CAM::NcmTurnRoughBuilder
```

--------------------------------

### SetGuid(const char *guid)

Source: https://www.ugapi.com/doc/nxopen/a15943.html

Sets the GUID using a C-style string.

```APIDOC
## SetGuid(const char *guid)

### Description
Sets the GUID using a C-style string.

### Method
SetGuid

### Parameters
- **guid** (const char*) - Required - The GUID to set.

### Returns
NXOpen::Routing::RootObject
```

--------------------------------

### Nxto2dSettingsFile()

Source: https://www.ugapi.com/doc/nxopen/functions_0x6e.html

Returns an instance of NXOpen::NXTo2dCreator.

```APIDOC
## Nxto2dSettingsFile()

### Description
Returns an instance of NXOpen::NXTo2dCreator.

### Method
Function

### Returns
- **NXOpen::NXTo2dCreator** - The returned object.
```

--------------------------------

### SetStartPointMotionType()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets the start point motion type for the turn avoidance start builder.

```APIDOC
## SetStartPointMotionType()

### Description
Sets the start point motion type for the turn avoidance start builder.

### Method
SetStartPointMotionType()

### Applies To
- NXOpen::CAM::TurnAvoidanceStartBuilder
```

--------------------------------

### Settings()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Gets the settings for various builders.

```APIDOC
## Settings()

### Description
Gets the settings for various builders.

### Method
Settings

### Applies To
- NXOpen::Annotations::Centerline2dBuilder
- NXOpen::Annotations::CircleCenterlineBuilder
- NXOpen::Annotations::SymmetricalCenterlineBuilder
- NXOpen::Layout2d::InsertComponentBuilder
- NXOpen::Annotations::BaseCenterMarkBuilder
- NXOpen::Annotations::BaseCenterline3dBuilder

### Parameters
None documented.

### Returns
None documented.
```

--------------------------------

### Initialize

Source: https://www.ugapi.com/doc/nxopen/a11277.html

Initializes the RuleManager with a license type and returns an intent status.

```APIDOC
## Initialize

### Description
Initializes the RuleManager with a license type and returns an intent status.

### Method
Initialize

### Signature
Initialize(NXOpen::RuleManager::LicenseType licenseToTake, int *intentStatus)

### Parameters
- **licenseToTake** (NXOpen::RuleManager::LicenseType) - Required - The license type to take.
- **intentStatus** (int*) - Required - Pointer to an integer to receive the intent status.

### Returns
Initialization status.
```

--------------------------------

### SetGuid(const NXString &guid)

Source: https://www.ugapi.com/doc/nxopen/a15952.html

Sets the GUID of the object. Inherited from NXOpen::Routing::RootObject.

```APIDOC
## SetGuid(const NXString &guid)

### Description
Sets the GUID of the object.

### Method
SetGuid

### Parameters
- **guid** (NXString) - Required - The GUID to set.

### Return Type
NXOpen::Routing::RootObject

### Response
No return value.
```

--------------------------------

### AssociativeArcBuilder Enums

Source: https://www.ugapi.com/doc/nxopen/a13980.html

Enumerations for start options, start references, and arc types used in AssociativeArcBuilder.

```APIDOC
## StartOption enum

### Description
Enumeration for start point options.

### Values
- **StartOptionInferred** - Inferred start option.
- **StartOptionPoint** - Point start option.
- **StartOptionTangent** - Tangent start option.

## StartReference enum

### Description
Enumeration for start reference types.

### Values
- **StartReferenceAbsolute** - Absolute reference.
- **StartReferenceCordinatesSystem** - Coordinate system reference.
- **StartReferenceWcs** - WCS reference.

## Types enum

### Description
Enumeration for arc types.

### Values
- **TypesArcFromCenter** - Arc from center.
- **TypesThreePointArc** - Three-point arc.

```

--------------------------------

### SetStartPointOptions()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets start point options for associative line and arc builders.

```APIDOC
## SetStartPointOptions()

### Description
Sets start point options for associative line and arc builders.

### Method
SetStartPointOptions()

### Applies To
- NXOpen::Features::AssociativeLineBuilder
- NXOpen::Features::AssociativeArcBuilder
```

--------------------------------

### SetHelpPoint()

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x73.html

Sets the help point for various builders and constraint references.

```APIDOC
## SetHelpPoint()

### Description
Sets the help point for various builders and constraint references.

### Method
SetHelpPoint

### Target Classes
- NXOpen::Features::FaceBlendBuilder
- NXOpen::Features::SphericalCornerBuilder
- NXOpen::Positioning::ConstraintReference
- NXOpen::SketchChamferBuilder

### Parameters
None documented.

### Returns
Various types depending on the target class.
```

--------------------------------

### DeleteAllGuideLines() : NXOpen::Tooling::MWDesignGuideLinesBuilder

Source: https://www.ugapi.com/doc/nxopen/functions_func_0x64.html

Deletes all guide lines in the MW design guide lines builder.

```APIDOC
## DeleteAllGuideLines()

### Description
Deletes all guide lines in the MW design guide lines builder.

### Method
DeleteAllGuideLines

### Return Type
NXOpen::Tooling::MWDesignGuideLinesBuilder

```
Tokens:
Raw