ThingPark Enterprise

https://docs.thingpark.com/thingpark-enterprise/latest/docs/
Admin
ThingPark Enterprise is an IoT connectivity management solution enabling deployment of private,...
Tokens:762,161
Snippets:11,332
Trust Score:8.6
Update:6 months ago
Show doc for...
Tokens:
Raw
### Install and Start Local Repository

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/appliance/installation/upgrade-procedure/local-repository-installation?persistLocale=true&persistLocale=true&persistLocale=true

Execute this script to install and start the local repository from mounted external media. The script copies files and provides the repository URL. Use the -s parameter to specify a different network.

```bash
[support@TPE-HOST iso]$ ./install.sh -f /home/support  
Copying 3640 files on /home/support/install...  
Done  
Starting local repository  
URL of the local repository:  
http://localrepository1.actility.local:8089  

```

--------------------------------

### Install LRR Firmware and Start Service

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/cisco-ixm?persistLocale=true&persistLocale=true&persistLocale=true&persistLocale=true

Install the LRR firmware package and start the packet forwarder service.

```bash
packet-forwarder install firmware flash:<lrr installation package>
packet-forwarder start
```

--------------------------------

### Install LRR Firmware and Start Services

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/cisco-ixm?persistLocale=true&persistLocale=true&persistLocale=true

Install the LRR firmware package from flash memory, start the packet forwarder service, and reload the gateway to apply changes.

```bash
# in Gateway(config)# mode
packet-forwarder install firmware flash:<lrr installation package>
packet-forwarder start
exit
reload
```

--------------------------------

### Install LRR Firmware and Start Services

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/cisco-ixm

Install the LRR firmware package from flash memory, start the packet forwarder service, and reload the gateway. This completes the LRR installation.

```bash
packet-forwarder install firmware flash:<lrr installation package>
```

```bash
packet-forwarder start
```

```bash
exit
```

```bash
reload
```

--------------------------------

### Start StatefulSet

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/kubernetes/administration/administration-tasks

Scale up a statefulset to a specified number of replicas to start it. This command starts the `lrc` statefulset with two replicas.

```bash
$ kubectl scale sts lrc --replicas=2
statefulset.apps/lrc scaled
```

--------------------------------

### Verify ThingPark Image Installation

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/kerlink-base-stations?persistLocale=true

Displays the contents of the /user/.update file to verify if the ThingPark image has been successfully installed. The status for installed packages should show 'OK'.

```bash
cat /user/.update
```

--------------------------------

### Example Image File Permissions

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/gemtek-browan

This is an example of the expected file permissions for a base station image file, indicating it is executable.

```text
-rwxr-xr-x. 1 root root 11M Jun 17 17:14 [GEMTEK base station image file name]
```

--------------------------------

### Resource Creation Example

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/api-subscriber/control-plane?persistLocale=true&persistLocale=true&persistLocale=true&persistLocale=true

Demonstrates the process of creating a new device resource using a POST request.

```APIDOC
## POST /thingpark/wireless/rest/subscriptions/mine/devices

### Description
Creates a new device resource within a subscription.

### Method
POST

### Endpoint
/thingpark/wireless/rest/subscriptions/mine/devices

### Request Body
- **connectivity** (string) - Required - The connectivity type, e.g., 'LORAWAN'.
- **activation** (string) - Required - The activation mode, e.g., 'OTAA'.
- **appEUI** (string) - Required - The application EUI of the device.
- **EUI** (string) - Required - The unique EUI of the device.
- **model** (object) - Required - Contains information about the device model.
  - **ID** (string) - Required - The ID of the device model.
- **appKey** (string) - Required - The application key for the device.

### Request Example
```json
{
   "connectivity":"LORAWAN",
   "activation":"OTAA",
   "appEUI":"ACDE48234567ABCD",
   "EUI":"ACDE48234567ABCD",
   "model":{
      "ID":"LORA/GenericA.1_ETSI_Rx2-SF12"
   },
   "appKey":"DEC499C69E9C939E413B663961636C61"
}
```

### Response
#### Success Response (201 Created)
- **now** (integer) - Timestamp of the creation.
- **occContext** (object) - Contextual information about the creation.
  - **version** (integer) - Version of the context.
  - **lastUpdate** (integer) - Timestamp of the last update.
  - **who** (string) - Identifier of the user who performed the action.
- **name** (string) - The name of the created device.
- **model** (object) - Information about the device model.
  - **commercialName** (string) - Commercial name of the model.
  - **logo** (string) - URL to the model's logo.
  - **typeMAC** (string) - MAC type of the model.
  - **type** (string) - Type of the device.
  - **macMajorVersion** (integer) - Major version of the MAC layer.
  - **macMinorVersion** (integer) - Minor version of the MAC layer.
  - **ID** (string) - The ID of the device model.
- **connectivity** (string) - The connectivity type.
- **vendor** (object) - Information about the device vendor.
  - **name** (string) - Name of the vendor.
  - **commercialName** (string) - Commercial name of the vendor.
  - **commercialDescription** (string) - Description of the vendor.
  - **ID** (string) - The ID of the vendor.
  - **logo** (string) - URL to the vendor's logo.
- **creationDate** (integer) - Timestamp of the creation date.
- **activation** (string) - The activation mode.
- **appEUI** (string) - The application EUI.
- **appKey** (string) - The application key.

#### Response Example
```json
{
   "now":1546611169519,
   "occContext":{
      "version":1,
      "lastUpdate":1546611169000,
      "who":"John Doe"
   },
   "name":"New device 533011",
   "model":{
      "commercialName":"LoRaWAN 1.0 - class A - Rx2_SF12",
      "logo":"/thingpark/wireless/rest/resources/files/logo/deviceProfile/3043",
      "typeMAC":"LoRaMAC",
      "type":"A",
      "macMajorVersion":0,
      "macMinorVersion":3,
      "ID":"LORA/GenericA.1_ETSI_Rx2-SF12"
   },
   "connectivity":"LORAWAN",
   "vendor":{
      "name":"Generic",
      "commercialName":"Generic",
      "commercialDescription":"LoRaWAN generic devices.",
      "ID":"generic",
      "logo":"/thingpark/wireless/rest/resources/files/logo/deviceVendor/313"
   },
   "creationDate":1546611169159,
   "activation":"OTAA",
   "nwAddress":null,
   "nwKey":null,
   "appKeys":null,
   "appEUI":"ACDE48234567ABCD",
   "appKey":"81CF679FFD70F5BD2B28C7A206BF4D6C",
   ...
}
```
```

--------------------------------

### Install LRR Package

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/tektelic-base-stations?persistLocale=true&persistLocale=true&persistLocale=true

Run the post-installation script to flash the base station with the ThingPark image after extracting the files. This process takes a few minutes.

```bash
./postinstall.sh  
```

--------------------------------

### Basics Station Configuration File

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/configure-base-station-using-basics-station

This is a sample station.conf file. Ensure parameters like antenna_gain and log_level are set correctly for your gateway. For some gateways, a 'routerid' field may need to be added.

```json
{
  "SX1301_conf": {
    "lorawan_public": true,
    "clksrc": 0,
    "pps": true,
    "device": "/dev/spidev0.0",
    "radio_0": {"enable": true, "freq": 867500000, "rssi_offset": -166, "tx_enable": true, "type": "SX1257", "antenna_gain": 0},
    "radio_1": {"enable": true, "freq": 868300000, "rssi_offset": -166, "tx_enable": false, "type": "SX1257", "antenna_gain": 0},
    "tx_gain_lut": [
      {"dig_gain": 0, "mix_gain": 11, "pa_gain": 0, "dac_gain": 3, "rf_power": -6},
      {"dig_gain": 0, "mix_gain": 13, "pa_gain": 0, "dac_gain": 3, "rf_power": -3},
      {"dig_gain": 0, "mix_gain": 9, "pa_gain": 1, "dac_gain": 3, "rf_power": 0},
      {"dig_gain": 0, "mix_gain": 10, "pa_gain": 1, "dac_gain": 3, "rf_power": 3},
      {"dig_gain": 0, "mix_gain": 12, "pa_gain": 1, "dac_gain": 3, "rf_power": 6},
      {"dig_gain": 0, "mix_gain": 10, "pa_gain": 2, "dac_gain": 3, "rf_power": 10},
      {"dig_gain": 0, "mix_gain": 11, "pa_gain": 2, "dac_gain": 3, "rf_power": 11},
      {"dig_gain": 0, "mix_gain": 11, "pa_gain": 2, "dac_gain": 3, "rf_power": 12},
      {"dig_gain": 2, "mix_gain": 12, "pa_gain": 2, "dac_gain": 3, "rf_power": 13},
      {"dig_gain": 0, "mix_gain": 13, "pa_gain": 2, "dac_gain": 3, "rf_power": 14},
      {"dig_gain": 0, "mix_gain": 15, "dac_gain": 3, "pa_gain": 2, "rf_power": 16},
      {"dig_gain": 0, "mix_gain": 10, "pa_gain": 3, "dac_gain": 3, "rf_power": 20},
      {"dig_gain": 0, "mix_gain": 12, "dac_gain": 3, "pa_gain": 3, "rf_power": 23},
      {"dig_gain": 0, "dac_gain": 3, "mix_gain": 13, "pa_gain": 3, "rf_power": 25},
      {"dig_gain": 0, "dac_gain": 3, "mix_gain": 15, "pa_gain": 3, "rf_power": 26},
      {"dig_gain": 0, "mix_gain": 15, "dac_gain": 3, "pa_gain": 3, "rf_power": 27}
    ]
  },
  "station_conf": {
    "nocca":   false,
    "nodc":    false,
    "nodwell": false,
    "log_file": "~temp/station.log",
    "log_level": "XDEBUG",
    "log_size": 10000000,
    "log_rotate": 3,
    "TC_TIMEOUT": "2s"
  }
}

```

--------------------------------

### Retrieve Devices (Python)

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/api-subscriber/control-plane/quickstart?persistLocale=true&persistLocale=true

Get device data using the requests library. Ensure 'requests' is installed and token is valid.

```python
devices = requests.get(  
    f"https://{platform_hostname}/thingpark/wireless/rest/subscriptions/mine/devices",  
    headers = { 'Authorization': f"Bearer {token['access_token']}", 'Accept': 'application/json' },  
).json()  

```

--------------------------------

### Check Packet Forwarder Status

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/cisco-ixm

Verify that the packet forwarder service is running after installation and reboot. This confirms the successful setup.

```bash
show packet-forwarder status
```

--------------------------------

### Retrieve Base Stations (Python)

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/api-subscriber/control-plane/quickstart?persistLocale=true&persistLocale=true

Get base station data using the requests library. Ensure 'requests' is installed and token is valid.

```python
base_stations = requests.get(  
    f"https://{platform_hostname}/thingpark/wireless/rest/partners/mine/bss",  
    headers = { 'Authorization': f"Bearer {token['access_token']}", 'Accept': 'application/json' },  
).json()  

```

--------------------------------

### Retrieve Helm Example Values Files

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/kubernetes/installation/install-preparation?persistLocale=true&persistLocale=true&persistLocale=true&persistLocale=true

Fetches sample Helm values files for data stack and ThingPark stack configurations. Ensure the RELEASE variable is set to the correct Thingpark Enterprise Release tag.

```bash
export NAMESPACE=thingpark-enterprise  
export RELEASE=<release name>  
export CONFIG_REPO_BASEURL=https://raw.githubusercontent.com/actility/thingpark-enterprise-kubernetes/v$RELEASE  
eval $(curl $CONFIG_REPO_BASEURL/VERSIONS)  
curl -O $CONFIG_REPO_BASEURL/examples/customization/values-data-stack.yaml  
curl -O $CONFIG_REPO_BASEURL/examples/customization/values-thingpark-stack.yaml  
```

--------------------------------

### Example Benchmark Script Execution and Output

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/appliance/size-hardware?persistLocale=true&persistLocale=true&persistLocale=true&persistLocale=true&persistLocale=true&persistLocale=true

This example demonstrates the execution of the tpebench.sh script with specified node IPs and shows a sample of the output, including hardware and sysbench information for each node. Note that TPE services should ideally be stopped before running the script for accurate results.

```bash
$ tpe-bench.sh --node2 192.168.250.17 --node3 192.168.250.18
TPE-Bench on node 2. The support password could be required
Connection to 192.168.250.17 closed.
TPE-Bench on node 2 : Download report. The support password could be required
tpe-bench.out.yaml                                                                                                                                                        100%  974KB 116.6MB/s   00:00
TPE-Bench on node 3. The support password could be required
Connection to 192.168.250.18 closed.
TPE-Bench on node 3 : Download report. The support password could be required
tpe-bench.out.yaml                                                                                                                                                        100%   90KB  19.7MB/s   00:00
##################################################################################################
#
#  Node 1 bench
#
##################################################################################################
#################################################
TPE services seem to be running.
Bench results may be affected.
TPE should be stopped before running the script.
#################################################

Get the meta informations

Get the hardware informations

Get the sysbench informations

CPU model:  Intel(R) Xeon(R) Gold 6226R CPU @ 2.90GHz
CPU score:  M (45991)
RAM:        M(15.6 G)
Disk size:  XL (157 G)
Disk write score: XXL(3578 w/s)
Disk read score: L(4247 r/s)

Server segment is M
Detailed result: tpe-bench.out-node1.yaml
##################################################################################################
#
#  Node 2 bench
#
##################################################################################################
#################################################
TPE services seem to be running.
Bench results may be affected.
TPE should be stopped before running the script.
#################################################

Get the meta informations

Get the hardware informations

Get the sysbench informations




CPU model:  Intel(R) Xeon(R) Gold 6226R CPU @ 2.90GHz
CPU score:  L (46872)
RAM:        M(15.6 G)
Disk size:  L (125 G)
Disk write score: XXL(3203 w/s)
Disk read score: L(4039 r/s)

Server segment is M
Detailed result: tpe-bench.out-node2.yaml
##################################################################################################
#
#  Node 3 bench
#
##################################################################################################
#################################################
TPE services seem to be running.
Bench results may be affected.
TPE should be stopped before running the script.
#################################################

Get the meta informations

Get the hardware informations

Get the sysbench informations

CPU model:  Intel(R) Xeon(R) Gold 6226R CPU @ 2.90GHz
CPU score:  XXL (45585)
RAM:        S-M-L-XL (2.9 G)
Disk size:  S-M-L-XL (20 G)
Disk write score: XXL (1073 w/s)
Disk read score: XXL (78343 r/s)

Server segment is S-M-L-XL
Detailed result: tpe-bench.out-node3.yaml


```

--------------------------------

### Noise Scan Result CSV Example

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/network-tools/spectrum-analysis/noise-scan-process?persistLocale=true&persistLocale=true&persistLocale=true

This CSV format represents the output of a noise scan performed by a Base Station using a Semtech HAL. Each line typically starts with a frequency in Hz, followed by RSSI values at that frequency and subsequent steps.

```csv
863000000,0.0,0,-0.5,0,-1.0,0,-1.5,0,-2.0,0,-2.5,0,-3.0,0,-3.5,0,-4.0,0,-4.5,0,-5.0,0,-5.5,0,-6.0,0,-6.5,0,-7.0,0,-7.5,0,-8.0,0,-8.5,0,-9.0,0,  
-9.5,0,-10.0,0,-10.5,0,-11.0,0,-11.5,0,-12.0,0,-12.5,0,-13.0,0,-13.5,0,-14.0,0,-14.5,0,-15.0,0,-15.5,0,-16.0,0,-16.5,0,-17.0,0,-17.5,0,-18.0,0,  
-18.5,0,-19.0,0,-19.5,0,-20.0,0,-20.5,0,-21.0,0,-21.5,0,-22.0,0,-22.5,0,-23.0,0,-23.5,0,-24.0,0,-24.5,0,-25.0,0,-25.5,0,-26.0,0,-26.5,0,-27.0,0,  
-27.5,0,-28.0,0,-28.5,0,-29.0,0,-29.5,0,-30.0,0,-30.5,0,-31.0,0,-31.5,0,-32.0,0,-32.5,0,-33.0,0,-33.5,0,-34.0,0,-34.5,0,-35.0,0,-35.5,0,-36.0,0,  
-36.5,0,-37.0,0,-37.5,0,-38.0,0,-38.5,0,-39.0,0,-39.5,0,-40.0,0,-40.5,0,-41.0,0,-41.5,0,-42.0,0,-42.5,0,-43.0,0,-43.5,0,-44.0,0,-44.5,0,-45.0,0,  
-45.5,0,-46.0,0,-46.5,0,-47.0,0,-47.5,0,-48.0,0,-48.5,0,-49.0,0,-49.5,0,-50.0,0,-50.5,0,-51.0,0,-51.5,0,-52.0,0,-52.5,0,-53.0,0,-53.5,0,-54.0,0,  
-54.5,0,-55.0,0,-55.5,0,-56.0,0,-56.5,0,-57.0,0,-57.5,0,-58.0,0,-58.5,0,-59.0,0,-59.5,0,-60.0,0,-60.5,0,-61.0,0,-61.5,0,-62.0,0,-62.5,0,-63.0,0,  
-63.5,0,-64.0,0,-64.5,0,-65.0,0,-65.5,0,-66.0,0,-66.5,0,-67.0,0,-67.5,0,-68.0,0,-68.5,0,-69.0,0,-69.5,0,-70.0,0,-70.5,0,-71.0,0,-71.5,0,-72.0,0,  
-72.5,0,-73.0,0,-73.5,0,-74.0,0,-74.5,0,-75.0,0,-75.5,0,-76.0,0,-76.5,0,-77.0,0,-77.5,0,-78.0,0,-78.5,0,-79.0,0,-79.5,0,-80.0,0,-80.5,0,-81.0,0,  
-81.5,0,-82.0,0,-82.5,0,-83.0,0,-83.5,0,-84.0,0,-84.5,0,-85.0,0,-85.5,0,-86.0,0,-86.5,0,-87.0,0,-87.5,0,-88.0,0,-88.5,0,-89.0,0,-89.5,0,-90.0,0,  
-90.5,0,-91.0,0,-91.5,0,-92.0,0,-92.5,0,-93.0,0,-93.5,0,-94.0,0,-94.5,0,-95.0,0,-95.5,0,-96.0,0,-96.5,0,-97.0,0,-97.5,0,-98.0,0,-98.5,0,-99.0,0,  
-99.5,0,-100.0,0,-100.5,0,-101.0,0,-101.5,0,-102.0,0,-102.5,0,-103.0,0,-103.5,0,-104.0,0,-104.5,17,-105.0,23,-105.5,417,-106.0,736,-106.5,1353,  
-107.0,4729,-107.5,3219,-108.0,2770,-108.5,2833,-109.0,399,-109.5,115,-110.0,30,-110.5,0,-111.0,0,-111.5,0,-112.0,0,-112.5,0,-113.0,0,-113.5,0,  
-114.0,0,-114.5,0,-115.0,0,-115.5,0,-116.0,0,-116.5,0,-117.0,0,-117.5,0,-118.0,0,-118.5,0,-119.0,0,-119.5,0,-120.0,0,-120.5,0,-121.0,0,-121.5,0,  
-122.0,0,-122.5,0,-123.0,0,-123.5,0,-124.0,0,-124.5,0,-125.0,0,-125.5,0,-126.0,0,-126.5,0,-127.0,0,  
-127.5,0 863050000,0.0,0,-0.5,0,...
```

--------------------------------

### Set up environment for Helm upgrade

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/kubernetes/administration/administration-tasks

Use your release tag name to ensure the correct configuration is used. Set the deployment namespace, ThingPark segment, and hosting environment.

```bash
# Use your release tag name to be sure to use appropriate configuration  
export RELEASE=<tag name>  
export CONFIG_REPO_BASEURL=https://raw.githubusercontent.com/actility/thingpark-enterprise-kubernetes/$RELEASE  
eval $(curl $CONFIG_REPO_BASEURL/VERSIONS)  
# Set the deployment namespace as an environment variable  
export NAMESPACE=thingpark-enterprise  
# Set the ThingPark segment chosen at capacity planning step  
# Value in l,xl,xxl  
export SEGMENT=<segment>  
# Set the targeted environment  
# Value azure,amazon  
export HOSTING=<hosting>  

```

--------------------------------

### Install Public Key for Packet Forwarder

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/cisco-ixm?persistLocale=true&persistLocale=true&persistLocale=true&persistLocale=true

Install the public key file required for the packet forwarder installation.

```bash
packet-forwarder install pubkey flash:<pubkey file>
```

--------------------------------

### Start Deployment

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/kubernetes/administration/administration-tasks

Scale up a deployment to a specified number of replicas to start it. This command starts the `twa-core` deployment with two replicas.

```bash
$ kubectl scale deploy twa-core --replicas=2
deployment.apps/twa-core scaled
```

--------------------------------

### Install LRR Package

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/gemtek-browan?persistLocale=true

Run this command on the base station after ensuring the image file has executable permissions. This command flashes the base station with the ThingPark image.

```bash
./[GEMTEK base station image file name]
```

--------------------------------

### Install Public Key for Packet Forwarder

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/cisco-ixm?persistLocale=true&persistLocale=true&persistLocale=true

Install the public key file from flash memory. This is a required step before installing the LRR firmware.

```bash
configure terminal
# in Gateway(config)# mode
packet-forwarder install pubkey flash:<pubkey file>
```

--------------------------------

### Install Public Key for Packet Forwarder

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/cisco-ixm

Install the public key file from flash memory. This is part of the LRR software installation process.

```bash
configure terminal
```

```bash
packet-forwarder install pubkey flash:<pubkey file>
```

--------------------------------

### Apply Storage Class for AWS or Azure

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/kubernetes/installation/cluster-wide-resources

Creates recommended StorageClasses for AWS or Azure environments. Review storage prerequisites for other hosting options.

```bash
kubectl -n $NAMESPACE apply -f $CONFIG_REPO_BASEURL/examples/storage/storage-class-$HOSTING.yaml  
```

--------------------------------

### Enable USB and Copy LRR Installation Packages

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/user-guide/base-stations/connect-new-base-station/install-thingpark-image/cisco-ixm

Enable USB storage on the base station and then copy the LRR installation package and the public key file from the USB drive to the base station's flash memory.

```bash
usb enable
copy usb:/<lrr installation package> flash:
copy usb:/<pubkey file> flash:
```

--------------------------------

### GET /subscriptions/mine/multicastGroups/frames

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/api-tpe/control-plane/device-manager/changelog?persistLocale=true&persistLocale=true&persistLocale=true

Deprecated: Use GET /subscriptions/mine/multicastGroups/frames/aggregated instead.

```APIDOC
## GET /subscriptions/mine/multicastGroups/frames

### Description
Deprecated: This endpoint must no longer be used. Use `GET /subscriptions/mine/multicastGroups/frames/aggregated` in replacement.

### Method
GET

### Endpoint
/subscriptions/mine/multicastGroups/frames
```

--------------------------------

### Prepare File IO Benchmark with Sysbench

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/appliance/size-hardware

Prepares the file system for a file IO benchmark by creating test files. Ensure the target directory has sufficient disk space (10GB in this example).

```bash
sysbench fileio --file-total-size=10G prepare
```

--------------------------------

### Install Thingpark Data Controllers

Source: https://docs.thingpark.com/thingpark-enterprise/latest/docs/ocp-tpe/kubernetes/installation/cluster-wide-resources?persistLocale=true&persistLocale=true&persistLocale=true&persistLocale=true

Deploy the `thingpark-data-controllers` chart using Helm. Ensure you have a `values-data-stack-all.yaml` file with your specific configurations.

```bash
helm upgrade -i tpe-data-controllers -n $NAMESPACE \ 
  actility/thingpark-data-controllers --version $THINGPARK_DATA_CONTROLLERS_VERSION \ 
  -f values-data-stack-all.yaml  
```
Tokens:
Raw