SpeedyBee

https://docs.speedybee.cn/en/
Admin
SpeedyBee provides flight controllers, ESCs, and a companion mobile application designed to enable...
Tokens:28,980
Snippets:548
Trust Score:3.6
Update:2 months ago
Show doc for...
Tokens:
Raw
### Example Calculation for Current Scale

Source: https://docs.speedybee.cn/en/fpv/esc/esc-common-issues/how-to-calibrate-the-current-sensor.html

A practical application of the scale adjustment formula using specific consumption and recharge values.

```text
New scale = 400 × (1100 / 1000) = 440
```

--------------------------------

### Configure OSD for Betaflight 4.3.0 and earlier

Source: https://docs.speedybee.cn/en/fpv/dji-air-unit/how-to-solve-the-issue-of-no-osd-on-the-dji-air-unit.html

CLI commands for older firmware versions, requiring explicit serial port configuration.

```text
set osd_displayport_device = MSP
set displayport_msp_serial = 0
save
```

--------------------------------

### Configure Analog OSD via CLI

Source: https://docs.speedybee.cn/en/fpv/vtx_vrx/what-is-a-vtx/what-to-do-if-theres-no-analog-osd.html

Use these commands in the Betaflight CLI tab to switch the OSD device to MAX7456 and save the configuration.

```text
set osd_displayport_device = MAX7456
set vcd_video_system = AUTO
save
```

--------------------------------

### Configure Betaflight CLI for Meteor LED Control

Source: https://docs.speedybee.cn/en/fpv/meteor-led-led/%E5%A6%82%E4%BD%95%E9%80%9A%E8%BF%87%E9%81%A5%E6%8E%A7%E5%99%A8%E6%8E%A7%E5%88%B6%E6%B5%81%E6%98%9F%E7%81%AF%E5%B8%A6/how-to-control-the-meteor-led-strip-via-transmitter.html

CLI commands to remap the LED_STRIP resource to PINIO for various flight controller models. Replace XXX with the specific pad ID for custom configurations.

```text
set pinio_box = 0,40,255,255
set pinio_config = 129,1,1,1

resource LED_STRIP 1 NONE
resource PINIO 2 C09

save
```

```text
set pinio_box = 0,40,255,255
set pinio_config = 129,1,1,1

resource LED_STRIP 1 NONE
resource PINIO 2 A08

save
```

```text
set pinio_box = 0,40,255,255
set pinio_config = 129,1,1,1

resource LED_STRIP 1 NONE
resource PINIO 2 C08

save
```

```text
set pinio_box = 0,40,255,255
set pinio_config = 129,1,1,1

resource LED_STRIP 1 NONE
resource PINIO 2 A08

save
```

```text
sqlCopyEditset pinio_box = 0,40,255,255
set pinio_config = 129,1,1,1

resource LED_STRIP 1 NONE
resource PINIO 2 C08

save
```

```text
set pinio_box = 0,40,255,255
set pinio_config = 129,1,1,1

resource LED_STRIP 1 NONE
resource PINIO 2 D12

save
```

```text
set pinio_box = 255,40,255,255
set pinio_config = 1,1,1,1

resource LED_STRIP 1 NONE
resource PINIO 2 XXX

save
```

--------------------------------

### Configure OSD for Betaflight 4.4.0 and newer

Source: https://docs.speedybee.cn/en/fpv/dji-air-unit/how-to-solve-the-issue-of-no-osd-on-the-dji-air-unit.html

Use these commands in the Betaflight CLI to enable MSP displayport for firmware versions 4.4.0 and above.

```text
set osd_displayport_device = MSP
set vcd_video_system = HD
save
```

--------------------------------

### Configure OSD for Betaflight 4.4.0

Source: https://docs.speedybee.cn/en/fpv/dji-air-unit/how-to-solve-the-issue-of-no-osd-on-the-dji-air-unit.html

Specific CLI commands for enabling MSP displayport on Betaflight 4.4.0 firmware.

```text
set osd_displayport_device = MSP
save
```

--------------------------------

### Map Servo to LED or CC pads in Betaflight CLI

Source: https://docs.speedybee.cn/en/fpv/fc-flight-controller/flight-control-servo-usage-tutorial/how-to-use-a-servo-with-the-f405-aio-in-betaflight.html

Use these commands to reassign the LED or Camera Control pads to servo output. Ensure the servo feature is enabled in the firmware before execution.

```text
LED：
resource LED_STRIP 1 none
resource SERVO 1 a08
save

CC:
resource CAMERA_CONTROL 1 none
resource SERVO 1 d15
save
```

--------------------------------

### Configure Standard SBUS in Betaflight CLI

Source: https://docs.speedybee.cn/en/fpv/fpv-drones/bee35-drone/bee35-using-dji-fpv-remote-controller.html

Use this command when the DJI FPV Goggles are set to 'Standard' mode.

```text
set sbus_baud_fast = OFF
save
```

--------------------------------

### Configure Servos on F405V3 via CLI

Source: https://docs.speedybee.cn/en/fpv/fc-flight-controller/flight-control-servo-usage-tutorial/how-to-use-a-servo-with-f7v3-f405v3-v4-in-betaflight..html

Remaps M5 and M6 pads to servo outputs for the F405V3 flight controller.

```text
resource MOTOR 5 none
resource MOTOR 6 none
resource SERVO 1 B00
resource SERVO 2 B01
save
```
Tokens:
Raw