### Exif::build

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/enum.Exif.html

Starts building EXIF metadata from common fields.

```APIDOC
## pub fn build() -> ExifFields

### Description
Initializes an ExifFields builder to construct EXIF metadata from common fields. This builder supports chaining methods like .orientation() and .copyright().

### Returns
- **ExifFields** - A builder object for constructing EXIF metadata.
```

--------------------------------

### DecodeRequest Usage Example

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeRequest.html

Demonstrates how to perform full-buffer and streaming decodes using a DecodePool and a cancellation token.

```rust
use zenjpeg::decode::{Decoder, DecodePool};

let decoder = Decoder::new();
let pool = DecodePool::new();

// Full-buffer decode with pool
let result = decoder.request(&jpeg_data)
    .pool(&pool)
    .stop(&cancel_token)
    .decode()?;

// Streaming decode with pool
let reader = decoder.request(&jpeg_data)
    .pool(&pool)
    .scanline_reader()?;
```

--------------------------------

### Example Implementation

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/trait.Stop.html

A custom implementation of the Stop trait using an AtomicBool to signal cancellation.

```rust
use enough::{Stop, StopReason};
use core::sync::atomic::{AtomicBool, Ordering};

pub struct MyStop<'a> {
    cancelled: &'a AtomicBool,
}

impl Stop for MyStop<'_> {
    fn check(&self) -> Result<(), StopReason> {
        if self.cancelled.load(Ordering::Relaxed) {
            Err(StopReason::Cancelled)
        } else {
            Ok(())
        }
    }
}
```

--------------------------------

### Configure Encoder Options

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/index.html

Examples of configuring YCbCr, XYB, and Grayscale modes, including quality settings.

```rust
// YCbCr mode (standard JPEG - most compatible)
let config = EncoderConfig::ycbcr(85, ChromaSubsampling::Quarter)
    .progressive(true)                        // Progressive JPEG (~3% smaller)
    .sharp_yuv(true)                          // Better color edges (~3x slower)
    .icc_profile(bytes);                      // Attach ICC profile

// XYB mode (perceptual color space - better quality)
let config = EncoderConfig::xyb(85, XybSubsampling::BQuarter)
    .progressive(true);

// Grayscale mode
let config = EncoderConfig::grayscale(85);

// Quality can also use enum variants:
let config = EncoderConfig::ycbcr(Quality::ApproxSsim2(90.0), ChromaSubsampling::None);
let config = EncoderConfig::ycbcr(Quality::ApproxButteraugli(1.0), ChromaSubsampling::Quarter);
```

--------------------------------

### Initialize EncoderConfig with custom tables

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Example of initializing an EncoderConfig instance with specific quality and subsampling settings, including custom quantization tables.

```rust
let config = EncoderConfig::ycbcr(85, ChromaSubsampling::Quarter)
    .tables(Box::new(tables));
```

--------------------------------

### Decode JPEG Quick Start

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/index.html

Basic usage of the Decoder to process image data.

```rust
use zenjpeg::decoder::{Decoder, DecodeResult, Result};

fn decode_jpeg(data: &[u8]) -> Result<DecodeResult> {
    Decoder::new().decode(data, enough::Unstoppable)
}
```

--------------------------------

### Get Recommended Quality and Subsampling

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/detect/struct.JpegProbe.html

Uses the probe to determine the recommended quality and subsampling settings for re-encoding.

```rust
let probe = zenjpeg::detect::probe(&source_jpeg)?;
let config = EncoderConfig::ycbcr(
    probe.recommended_quality(),
    probe.recommended_subsampling(),
).auto_optimize(true);
```

--------------------------------

### Configure Limits with builder methods

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.Limits.html

Example of using the builder pattern to set specific resource constraints on a Limits instance.

```rust
use zenjpeg::encoder::Limits;

let limits = Limits::default()
    .max_pixels(100_000_000)       // 100 megapixels
    .max_memory(512 * 1024 * 1024) // 512 MB
    .max_output(50 * 1024 * 1024); // 50 MB output
```

--------------------------------

### Access decoded coefficients

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodedCoefficients.html

Example showing how to decode JPEG data and access specific DCT coefficients.

```rust
use zenjpeg::decode::Decoder;

let decoder = Decoder::new();
let coeffs = decoder.decode_coefficients(&jpeg_data)?;

// Access Y component DC coefficient for first block
let y_dc = coeffs.components[0].block(0)[0];
println!("Y DC: {}", y_dc);
```

--------------------------------

### Handle DecodeWarnings

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/enum.DecodeWarning.html

Example of iterating through collected warnings after a decoding operation.

```rust
use zenjpeg::decoder::{Decoder, DecodeWarning};

let result = Decoder::new().decode(&data, enough::Unstoppable)?;
for warning in result.warnings() {
    match warning {
        DecodeWarning::MissingHuffmanTables => eprintln!("MJPEG: used standard tables"),
        DecodeWarning::TruncatedScan { .. } => eprintln!("Scan data was truncated"),
        _ => {}
    }
}
```

--------------------------------

### Pixel Implementations

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/trait.Pixel.html

Examples of Pixel trait implementations for various pixel types and their corresponding layouts.

```rust
impl Pixel for Bgr<u8> {
    const LAYOUT: PixelLayout = PixelLayout::Bgr8Srgb
}
```

```rust
impl Pixel for Bgra<u8> {
    const LAYOUT: PixelLayout = PixelLayout::Bgra8Srgb
}
```

```rust
impl Pixel for Gray<f32> {
    const LAYOUT: PixelLayout = PixelLayout::GrayF32Linear
}
```

```rust
impl Pixel for Gray<u8> {
    const LAYOUT: PixelLayout = PixelLayout::Gray8Srgb
}
```

```rust
impl Pixel for Gray<u16> {
    const LAYOUT: PixelLayout = PixelLayout::Gray16Linear
}
```

```rust
impl Pixel for RGB<f32> {
    const LAYOUT: PixelLayout = PixelLayout::RgbF32Linear
}
```

```rust
impl Pixel for RGB<u8> {
    const LAYOUT: PixelLayout = PixelLayout::Rgb8Srgb
}
```

```rust
impl Pixel for RGB<u16> {
    const LAYOUT: PixelLayout = PixelLayout::Rgb16Linear
}
```

```rust
impl Pixel for RGBA<f32> {
    const LAYOUT: PixelLayout = PixelLayout::RgbaF32Linear
}
```

```rust
impl Pixel for RGBA<u8> {
    const LAYOUT: PixelLayout = PixelLayout::Rgba8Srgb
}
```

```rust
impl Pixel for RGBA<u16> {
    const LAYOUT: PixelLayout = PixelLayout::Rgba16Linear
}
```

--------------------------------

### Conditional Result Checking

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Example of using is_ok_and to check a Result against a predicate.

```rust
let x: Result<u32, &str> = Ok(2);
assert_eq!(x.is_ok_and(|x| x > 1), true);

let x: Result<u32, &str> = Ok(0);
assert_eq!(x.is_ok_and(|x| x > 1), false);

let x: Result<u32, &str> = Err("hey");
assert_eq!(x.is_ok_and(|x| x > 1), false);

let x: Result<String, &str> = Ok("ownership".to_string());
assert_eq!(x.as_ref().is_ok_and(|x| x.len() > 1), true);
println!("still alive {:?}", x);
```

--------------------------------

### Cloning Result Contents

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Examples of using .cloned() on Result types containing references.

```rust
let val = 12;
let x: Result<&i32, i32> = Ok(&val);
assert_eq!(x, Ok(&12));
let cloned = x.cloned();
assert_eq!(cloned, Ok(12));
```

```rust
let mut val = 12;
let x: Result<&mut i32, i32> = Ok(&mut val);
assert_eq!(x, Ok(&mut 12));
let cloned = x.cloned();
assert_eq!(cloned, Ok(12));
```

--------------------------------

### Flattening Nested Results

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Examples of flattening nested Result types.

```rust
let x: Result<Result<&'static str, u32>, u32> = Ok(Ok("hello"));
assert_eq!(Ok("hello"), x.flatten());

let x: Result<Result<&'static str, u32>, u32> = Ok(Err(6));
assert_eq!(Err(6), x.flatten());

let x: Result<Result<&'static str, u32>, u32> = Err(6);
assert_eq!(Err(6), x.flatten());
```

```rust
let x: Result<Result<Result<&'static str, u32>, u32>, u32> = Ok(Ok(Ok("hello")));
assert_eq!(Ok(Ok("hello")), x.flatten());
assert_eq!(Ok("hello"), x.flatten().flatten());
```

--------------------------------

### Unwrap Unchecked Examples

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/type.EncodeResult.html

Demonstrates usage of unwrap_unchecked and unwrap_err_unchecked, noting that calling these on the wrong variant is undefined behavior.

```rust
let x: Result<u32, &str> = Ok(2);
assert_eq!(unsafe { x.unwrap_unchecked() }, 2);
```

```rust
let x: Result<u32, &str> = Err("emergency failure");
unsafe { x.unwrap_unchecked() }; // Undefined behavior!
```

```rust
let x: Result<u32, &str> = Ok(2);
unsafe { x.unwrap_err_unchecked() }; // Undefined behavior!
```

```rust
let x: Result<u32, &str> = Err("emergency failure");
assert_eq!(unsafe { x.unwrap_err_unchecked() }, "emergency failure");
```

--------------------------------

### Copying Result Contents

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Examples of using .copied() on Result types containing references.

```rust
let val = 12;
let x: Result<&i32, i32> = Ok(&val);
assert_eq!(x, Ok(&12));
let copied = x.copied();
assert_eq!(copied, Ok(12));
```

```rust
let mut val = 12;
let x: Result<&mut i32, i32> = Ok(&mut val);
assert_eq!(x, Ok(&mut 12));
let copied = x.copied();
assert_eq!(copied, Ok(12));
```

--------------------------------

### Transposing Result and Option

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Example of transposing a Result of an Option into an Option of a Result.

```rust
#[derive(Debug, Eq, PartialEq)]
struct SomeErr;

let x: Result<Option<i32>, SomeErr> = Ok(Some(5));
let y: Option<Result<i32, SomeErr>> = Some(Ok(5));
assert_eq!(x.transpose(), y);
```

--------------------------------

### Apply CropRegion to Decoder

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/enum.CropRegion.html

Example of using CropRegion with the Decoder to crop a specific area of an image.

```rust
use zenjpeg::decode::{Decoder, CropRegion};

// Crop a 100x100 region starting at (50, 50)
let result = Decoder::new()
    .crop(CropRegion::pixels(50, 50, 100, 100))
    .decode(&jpeg_data, enough::Unstoppable)?;
assert_eq!(result.width(), 100);
assert_eq!(result.height(), 100);
```

--------------------------------

### Chain fallible operations with and_then

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Use and_then to chain operations that return a Result. The first example demonstrates basic usage, while the second shows file system metadata retrieval.

```rust
assert_eq!(Ok(2).and_then(sq_then_to_string), Ok(4.to_string()));
assert_eq!(Ok(1_000_000).and_then(sq_then_to_string), Err("overflowed"));
assert_eq!(Err("not a number").and_then(sq_then_to_string), Err("not a number"));
```

```rust
use std::{io::ErrorKind, path::Path};

// Note: on Windows "/" maps to "C:\"
let root_modified_time = Path::new("/").metadata().and_then(|md| md.modified());
assert!(root_modified_time.is_ok());

let should_fail = Path::new("/bad/path").metadata().and_then(|md| md.modified());
assert!(should_fail.is_err());
assert_eq!(should_fail.unwrap_err().kind(), ErrorKind::NotFound);
```

--------------------------------

### Checking Result Status

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Examples of checking if a Result is Ok or Err.

```rust
let x: Result<i32, &str> = Ok(-3);
assert_eq!(x.is_ok(), true);

let x: Result<i32, &str> = Err("Some error message");
assert_eq!(x.is_ok(), false);
```

```rust
let x: Result<i32, &str> = Ok(-3);
assert_eq!(x.is_err(), false);

let x: Result<i32, &str> = Err("Some error message");
assert_eq!(x.is_err(), true);
```

--------------------------------

### Generate Mozjpeg Quantization Tables

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.MozjpegTables.html

Demonstrates how to generate quantization tables using standard or custom presets for a specific quality level.

```rust
use zenjpeg::encode::{MozjpegTables, QuantTablePreset};

// Standard mozjpeg quality 85 with default (Robidoux) tables
let tables = MozjpegTables::generate(85, QuantTablePreset::default());

// Or with a specific preset
let tables = MozjpegTables::generate(75, QuantTablePreset::MssimTuned);
```

--------------------------------

### Decode JPEG with Decoder

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeConfig.html

Demonstrates basic decoding using default settings and configuring output for f32 sRGB.

```rust
use zenjpeg::decoder::Decoder;

// Default (u8 sRGB, fastest)
let result = Decoder::new().decode(&jpeg_data, enough::Unstoppable)?;
let pixels: &[u8] = result.pixels_u8().unwrap();

// f32 sRGB with unclamped IDCT
let result = Decoder::new()
    .output_target(OutputTarget::SrgbF32)
    .decode(&jpeg_data, enough::Unstoppable)?;
let pixels: &[f32] = result.pixels_f32().unwrap();
```

--------------------------------

### Configure JPEG encoding parameters

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/index.html

Shows how to customize encoding settings for different color modes and quality metrics.

```rust
use zenjpeg::encoder::{EncoderConfig, Quality, ChromaSubsampling, XybSubsampling};

// YCbCr (standard JPEG) - reusable config
let config = EncoderConfig::ycbcr(85, ChromaSubsampling::Quarter)
    .progressive(true)                        // Progressive JPEG (~3% smaller)
    .optimize_huffman(true)                   // Optimal Huffman tables (default)
    .sharp_yuv(true)                          // Better color edges (~3x slower)
    .restart_mcu_rows(4);                      // MCU rows between restart markers (default)

// XYB (perceptual color space)
let config = EncoderConfig::xyb(85, XybSubsampling::BQuarter)
    .progressive(true);

// Grayscale
let config = EncoderConfig::grayscale(85);

// Quality can also use enum variants:
let config = EncoderConfig::ycbcr(Quality::ApproxMozjpeg(80), ChromaSubsampling::Quarter);
let config = EncoderConfig::ycbcr(Quality::ApproxSsim2(90.0), ChromaSubsampling::None);
let config = EncoderConfig::ycbcr(Quality::ApproxButteraugli(1.0), ChromaSubsampling::Quarter);
```

--------------------------------

### Apply pre-blur to EncoderConfig

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Demonstrates setting a Gaussian blur sigma value to optimize file size before encoding.

```rust
let config = EncoderConfig::ycbcr(85, ChromaSubsampling::Quarter)
    .pre_blur(0.4);
```

--------------------------------

### OptimizationPreset Methods

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/enum.OptimizationPreset.html

Methods available on the OptimizationPreset enum to query configuration details.

```APIDOC
## pub fn all() -> impl Iterator<Item = Self>

Returns an iterator over all available preset variants.

## pub const fn is_progressive(self) -> bool

Returns true if the preset uses progressive encoding.

## pub const fn uses_trellis(self) -> bool

Returns true if the preset enables trellis quantization.

## pub const fn uses_aq(self) -> bool

Returns true if the preset uses jpegli adaptive quantization (AQ).

## pub const fn quant_table_source(self) -> QuantTableSource

Returns the quantization table source for the preset.

## pub const fn scan_strategy(self) -> ScanStrategy

Returns the scan strategy for the preset.

## pub const fn name(self) -> &'static str

Returns the short name of the preset for display or logging purposes.
```

--------------------------------

### Configure ZenJPEG dependencies

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/index.html

Various Cargo.toml configurations for different use cases, including decoder support, parallel processing, and UltraHDR.

```toml
zenjpeg = { version = "0.6", features = ["decoder"] }
```

```toml
zenjpeg = "0.6"
```

```toml
zenjpeg = { version = "0.6", features = ["decoder", "parallel"] }
```

```toml
zenjpeg = { version = "0.6", default-features = false }
```

```toml
zenjpeg = { version = "0.6", features = ["decoder", "ultrahdr"] }
```

--------------------------------

### Apply Custom Encoding Tables

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Demonstrates how to apply and modify custom encoding tables for experimentation, bypassing standard quality scaling.

```rust
use zenjpeg::encode::{EncoderConfig, ChromaSubsampling};
use zenjpeg::encode::tuning::EncodingTables;

let mut tables = EncodingTables::default_ycbcr();
tables.scale_quant(0, 0, 0.8);  // Reduce DC quantization
```

--------------------------------

### Creating and using an EncodeRequest

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncodeRequest.html

Demonstrates how to create an EncodeRequest from an EncoderConfig and use it to encode image data.

```rust
use zenjpeg::encoder::{EncoderConfig, ChromaSubsampling};

let config = EncoderConfig::ycbcr(85.0, ChromaSubsampling::Quarter);

// Reuse config with different metadata per image
let jpeg1 = config.request()
    .icc_profile(&srgb_bytes)
    .encode(&pixels1, 1920, 1080)?;
```

--------------------------------

### EncoderConfig and Request Pattern

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/index.html

Demonstrates how to create a reusable EncoderConfig and apply per-image metadata using the request pattern.

```APIDOC
## EncoderConfig and Request Pattern

### Description
Use `EncoderConfig` to define global encoding settings like quality and subsampling. Use the `.request()` method to apply specific metadata (ICC profiles, EXIF data) per image before calling `.encode()`.

### Methods
- **EncoderConfig::ycbcr(quality, subsampling)**: Initializes a new configuration.
- **.auto_optimize(bool)**: Enables or disables automatic optimization.
- **.progressive(bool)**: Sets progressive encoding mode.
- **.request()**: Creates a request builder for specific image metadata.
- **.icc_profile(bytes)**: Sets the ICC profile for the image.
- **.exif(Exif)**: Sets EXIF metadata.
- **.encode(pixels, width, height)**: Encodes the image data.
```

--------------------------------

### Estimate Memory Usage for Decoding

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeConfig.html

Calculate the peak memory required for decoding an image of specific dimensions before starting the process.

```rust
use zenjpeg::decode::Decoder;

let decoder = Decoder::new();
let estimated = decoder.estimate_memory_usage(4096, 4096);
println!("Estimated peak memory: {} MB", estimated / 1024 / 1024);
```

--------------------------------

### Calculate Product of Result Items

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Demonstrates using the product method on an iterator of Results, which short-circuits on the first Err encountered.

```rust
let nums = vec!["5", "10", "1", "2"];
let total: Result<usize, _> = nums.iter().map(|w| w.parse::<usize>()).product();
assert_eq!(total, Ok(100));
let nums = vec!["5", "10", "one", "2"];
let total: Result<usize, _> = nums.iter().map(|w| w.parse::<usize>()).product();
assert!(total.is_err());
```

--------------------------------

### Use Unstoppable in a function

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.Unstoppable.html

Example showing how to pass Unstoppable to a function expecting a Stop trait implementation when cancellation is not required.

```rust
use enough::{Stop, Unstoppable};

fn process(data: &[u8], stop: impl Stop) -> Vec<u8> {
    // ...
}

// Caller doesn't need cancellation
let data = [1u8, 2, 3];
let result = process(&data, Unstoppable);
```

--------------------------------

### Perform an image encoding request

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncodeRequest.html

Demonstrates how to configure an encoding request with an ICC profile and execute the encoding process.

```rust
let jpeg2 = config.request()
    .icc_profile(&p3_bytes)
    .encode(&pixels2, 3840, 2160)?;
```

--------------------------------

### HuffmanTableSet::from_standard

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.HuffmanTableSet.html

Builds a HuffmanTableSet using the standard JPEG Annex K tables defined in ITU-T T.81.

```APIDOC
## pub fn from_standard() -> Result<Self>

### Description
Builds tables from the JPEG standard Huffman tables (Annex K of ITU-T T.81). These tables are defined in the JPEG specification and are generally less efficient than the default trained tables.

### Returns
- **Result<Self>** - A Result containing the initialized HuffmanTableSet or an error.
```

--------------------------------

### Into Ok

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Result.html

Returns the Ok value without panicking, intended for infallible results.

```rust
fn only_good_news() -> Result<String, !> {
    Ok("this is fine".into())
}

let s: String = only_good_news().into_ok();
println!("{s}");
```

--------------------------------

### Exif::raw

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/enum.Exif.html

Creates an Exif instance from raw TIFF bytes. The bytes should not include the APP1 prefix.

```APIDOC
## pub fn raw(bytes: impl Into<Vec<u8>>) -> Self

### Description
Creates an EXIF instance from raw TIFF bytes. The provided bytes should be raw TIFF data without the 'Exif\0\0' APP1 prefix, as the encoder adds that automatically.

### Parameters
- **bytes** (impl Into<Vec<u8>>) - Required - The raw TIFF data bytes.
```

--------------------------------

### Manage Resource Limits and Cancellation

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/index.html

Configure memory and pixel limits for DoS protection and implement cooperative cancellation using a stop token.

```rust
use zenjpeg::decoder::Decoder;
use zenjpeg::types::Limits;
use enough::Unstoppable;

// Set resource limits (DoS protection)
let decoder = Decoder::new()
    .max_pixels(100_000_000)      // 100 megapixels max
    .max_memory(512_000_000);     // 512 MB max allocation

// Or use Limits struct
let limits = Limits {
    max_pixels: Some(100_000_000),
    max_memory: Some(512_000_000),
    max_output: None,
};
let decoder = Decoder::new().limits(limits);

// Custom stop token for cancellation
let result = decoder.decode(data, &my_cancel_token)?;
```

--------------------------------

### Perform basic JPEG encoding

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/index.html

Demonstrates the standard workflow for encoding RGB bytes into a JPEG using YCbCr configuration.

```rust
use zenjpeg::encoder::{EncoderConfig, ChromaSubsampling, PixelLayout, Unstoppable};

let config = EncoderConfig::ycbcr(85, ChromaSubsampling::Quarter);
let mut enc = config.encode_from_bytes(1920, 1080, PixelLayout::Rgb8Srgb)?;
enc.push_packed(&rgb_bytes, Unstoppable)?;
let jpeg = enc.finish()?;
```

--------------------------------

### aq_enabled

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Enable or disable adaptive quantization (jpegli AQ).

```APIDOC
## pub fn aq_enabled(self, enable: bool) -> Self

### Description
Enable or disable adaptive quantization (jpegli AQ). When enabled (default), the encoder computes per-block AQ strengths from luminance data.

### Parameters
- **enable** (bool) - Required - Enable or disable adaptive quantization.
```

--------------------------------

### Create an encode request with metadata

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Shows how to generate an EncodeRequest from a base configuration to apply per-image metadata like ICC profiles and EXIF data.

```rust
use zenjpeg::encoder::{EncoderConfig, ChromaSubsampling, Exif, Orientation};

let config = EncoderConfig::ycbcr(85.0, ChromaSubsampling::Quarter);

// Reuse config, vary metadata per image
let jpeg = config.request()
    .icc_profile(&srgb_bytes)
    .exif(Exif::build().orientation(Orientation::Rotate90))
    .encode(&pixels, 1920, 1080)?;
```

--------------------------------

### recommended_quality

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/detect/struct.JpegProbe.html

Returns the recommended zenjpeg quality for re-encoding, aiming for a butteraugli delta of 0.3 or less.

```APIDOC
## fn recommended_quality(&self) -> Quality

### Description
Returns the lowest quality level that keeps butteraugli delta ≤ 0.3 from the source — barely perceptible degradation.
```

--------------------------------

### Decoder Configuration and Request

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/type.Decoder.html

Methods for configuring the decoder and initiating a decode request.

```APIDOC
## Decoder Configuration

### pub fn new() -> Self
Creates a new decoder configuration with default settings.

### pub fn output_format(self, format: PixelFormat) -> Self
Sets the output pixel format.

### pub fn chroma_upsampling(self, method: ChromaUpsampling) -> Self
Sets the chroma upsampling method (Triangle or NearestNeighbor).

### pub fn idct_method(self, method: IdctMethod) -> Self
Sets the integer IDCT algorithm (Jpegli or Libjpeg).

### pub fn deblock(self, mode: DeblockMode) -> Self
Enable post-decode deblocking to reduce JPEG block artifacts.

### pub fn max_pixels(self, pixels: u64) -> Self
Sets the maximum number of pixels allowed for DoS protection.

### pub fn max_memory(self, bytes: u64) -> Self
Sets the maximum memory allowed for allocations during decoding.

### pub fn limits(self, limits: Limits) -> Self
Sets resource limits from a Limits struct.

### pub fn request<'a>(&'a self, data: &'a [u8]) -> DecodeRequest<'a>
Creates a per-job decode request binding this config with JPEG data.
```

--------------------------------

### pub fn preserve(self, config: PreserveConfig) -> Self

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeConfig.html

Configure what metadata and secondary images to preserve during decode.

```APIDOC
## pub fn preserve(self, config: PreserveConfig) -> Self

### Description
Configure what metadata and secondary images to preserve during decode.

### Parameters
- **config** (PreserveConfig) - Required - The configuration for metadata and secondary image preservation.
```

--------------------------------

### pub fn max_pixels(self, pixels: u64) -> Self

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeConfig.html

Sets the maximum number of pixels allowed for DoS protection. Default is 100 megapixels. Set to 0 for unlimited.

```APIDOC
## pub fn max_pixels(self, pixels: u64) -> Self

### Description
Sets the maximum number of pixels allowed (for DoS protection). Default is 100 megapixels. Set to 0 for unlimited.

### Parameters
- **pixels** (u64) - Required - Maximum number of pixels allowed.
```

--------------------------------

### ProfileGuard::new

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/profile/struct.ProfileGuard.html

Creates a new instance of ProfileGuard with a specified name.

```APIDOC
## pub fn new(_name: &'static str) -> Self

### Description
Creates a new ProfileGuard instance. This is typically used to start a profiling scope.

### Parameters
- **_name** (&'static str) - Required - The name associated with the profile guard.
```

--------------------------------

### Request Decode with Pool

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeConfig.html

Shows how to create a decode request using a configuration and optionally binding it to a thread pool.

```rust
use zenjpeg::decode::{Decoder, DecodePool};

let decoder = Decoder::new().chroma_upsampling(ChromaUpsampling::NearestNeighbor);
let pool = DecodePool::new();

// With pool (server)
let result = decoder.request(&jpeg_data)
    .pool(&pool)
    .decode()?;

// Without pool (standalone)
let result = decoder.request(&jpeg_data).decode()?;
```

--------------------------------

### Configure Decoder Dependency

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/index.html

Add the zenjpeg dependency with the decoder feature enabled in your Cargo.toml.

```toml
[dependencies]
zenjpeg = { version = "0.6", features = ["decoder"] }
```

--------------------------------

### pub fn copyright(self, copyright: impl Into<String>) -> Self

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.ExifFields.html

Sets the EXIF copyright tag for the image metadata.

```APIDOC
## pub fn copyright(self, copyright: impl Into<String>) -> Self

### Description
Set the EXIF copyright tag. Standard format is “Copyright, Owner Name, Year” but any string works.

### Parameters
- **copyright** (impl Into<String>) - Required - The copyright string to set.
```

--------------------------------

### Encode from raw bytes

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Demonstrates creating an encoder instance from raw byte buffers with a specified pixel layout.

```rust
use zenjpeg::{EncoderConfig, ChromaSubsampling, PixelLayout, Unstoppable};
let config = EncoderConfig::ycbcr(85.0, ChromaSubsampling::Quarter);
let mut enc = config.encode_from_bytes(1920, 1080, PixelLayout::Rgb8Srgb)?;
enc.push_packed(&rgb_bytes, Unstoppable)?;
let jpeg = enc.finish()?;
```

--------------------------------

### then

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/lossless/enum.LosslessTransform.html

Composes two transforms by applying them in sequence.

```APIDOC
### pub fn then(self, other: Self) -> Self

Returns a new transform that is the result of applying `self` followed by `other`.
```

--------------------------------

### MozjpegTables::generate_ex

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.MozjpegTables.html

Generates encoding tables with explicit control over baseline JPEG compatibility clamping.

```APIDOC
## MozjpegTables::generate_ex(quality: u8, preset: QuantTablePreset, force_baseline: bool) -> Box<EncodingTables>

### Description
Generates encoding tables with baseline clamping control. This is similar to `generate`, but allows explicit control over whether to clamp values to 255 for baseline JPEG compatibility.

### Parameters
- **quality** (u8) - Quality level 1-100.
- **preset** (QuantTablePreset) - Which base table variant to use.
- **force_baseline** (bool) - If true, clamp all values to 255 (baseline JPEG).
```

--------------------------------

### Configuration Methods

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeConfig.html

Methods available on the DecodeConfig builder to customize the decoding process.

```APIDOC
## Configuration Methods

### strictness(self, strictness: Strictness) -> Self
Sets the strictness level for error handling. Options include Strict, Balanced (default), Lenient, and Permissive.

### strict(self) -> Self
Convenience method to set strict mode (fail on any recoverable error).

### lenient(self) -> Self
Convenience method to set lenient mode (recover from all errors).

### permissive(self) -> Self
Convenience method to set permissive mode (maximum libjpeg-turbo compatibility).

### output_target(self, target: OutputTarget) -> Self
Sets the output target controlling precision, transfer function, and IDCT variant.

### gain_map(self, handling: GainMapHandling) -> Self
Sets how UltraHDR gain maps are handled.

### auto_orient(self, enable: bool) -> Self
Controls automatic EXIF orientation correction. Enabled by default.

### transform(self, transform: LosslessTransform) -> Self
Sets an explicit lossless transform to apply during decode in DCT-coefficient space.

### orientation(self, hint: OrientationHint) -> Self
Sets the orientation strategy for decode, combining EXIF auto-correction and explicit transforms.

### dequant_bias(self, enable: bool) -> Self
Enables optimal Laplacian dequantization biases for higher quality output at the cost of performance.

### crop(self, region: CropRegion) -> Self
Sets a crop region for decode to output only a sub-region of the image.

### num_threads(self, n: usize) -> Self
Sets the number of threads for parallel decode paths. 0 (default) uses the global thread pool.
```

--------------------------------

### recommended_subsampling

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/detect/struct.JpegProbe.html

Returns the recommended chroma subsampling mode that matches the source JPEG.

```APIDOC
## fn recommended_subsampling(&self) -> ChromaSubsampling

### Description
Returns the recommended ChromaSubsampling matching the source JPEG to preserve the original subsampling mode.
```

--------------------------------

### finish_into(&mut self, output: &mut Vec<u8>) -> Result<()>

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.BytesEncoder.html

Completes the encoding process and writes the resulting JPEG data directly into the provided buffer.

```APIDOC
## pub fn finish_into(&mut self, output: &mut Vec<u8>) -> Result<()>

### Description
Finish encoding, writing directly to the provided buffer. This is the most efficient way to complete encoding as it avoids intermediate allocations. The buffer is cleared before writing.

### Example
```rust
let mut output = Vec::new();
encoder.finish_into(&mut output)?;
// output now contains the JPEG data
```
```

--------------------------------

### Encode RGB pixels using EncoderConfig

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Demonstrates creating an encoder from RGB pixel types and performing a streaming encode operation.

```rust
use rgb::RGB;
use zenjpeg::{EncoderConfig, ChromaSubsampling, Unstoppable};

let config = EncoderConfig::ycbcr(85.0, ChromaSubsampling::Quarter);
let mut enc = config.encode_from_rgb::<RGB<u8>>(1920, 1080)?;
enc.push_packed(&pixels, Unstoppable)?;
let jpeg = enc.finish()?;
```

--------------------------------

### pub fn limits(self, limits: Limits) -> Self

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeConfig.html

Sets resource limits from a Limits struct.

```APIDOC
## pub fn limits(self, limits: Limits) -> Self

### Description
Sets resource limits from a Limits struct. This applies max_pixels and max_memory from the Limits struct.

### Parameters
- **limits** (Limits) - Required - The limits configuration struct.
```

--------------------------------

### Configure Decoder Strictness

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodeConfig.html

Demonstrates setting different strictness levels for error handling during the decoding process.

```rust
use zenjpeg::decode::{Decoder, Strictness};

// Strict mode for validation
let decoder = Decoder::new().strictness(Strictness::Strict);

// Balanced mode (default) for production
let decoder = Decoder::new().strictness(Strictness::Balanced);

// Lenient mode for corrupt file recovery
let decoder = Decoder::new().strictness(Strictness::Lenient);

// Permissive mode for maximum compatibility
let decoder = Decoder::new().strictness(Strictness::Permissive);
```

--------------------------------

### pub fn orientation(self, orientation: Orientation) -> Self

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.ExifFields.html

Sets the EXIF orientation tag, which determines how image viewers should rotate or flip the image for display.

```APIDOC
## pub fn orientation(self, orientation: Orientation) -> Self

### Description
Sets the EXIF orientation tag. This controls how image viewers should rotate/flip the image for display.

### Parameters
- **orientation** (Orientation) - Required - The orientation value to apply.
```

--------------------------------

### Configure Huffman Strategy

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Sets the Huffman table strategy using booleans, explicit strategies, or custom table sets. Progressive mode requires HuffmanStrategy::Optimize.

```rust
use zenjpeg::encoder::{EncoderConfig, HuffmanStrategy, HuffmanTableSet};

// Boolean (same as old optimize_huffman)
let config = EncoderConfig::ycbcr(85, sub).huffman(true);

// Explicit strategy
let config = EncoderConfig::ycbcr(85, sub).huffman(HuffmanStrategy::FixedAnnexK);

// Custom tables
let tables = HuffmanTableSet::annex_k()?;
let config = EncoderConfig::ycbcr(85, sub).huffman(tables);
```

--------------------------------

### Estimate JPEG decoding resources in Rust

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/heuristics/fn.estimate_decode.html

Calculates output buffer size, peak memory, and typical decoding time for a given image resolution and pixel format.

```rust
use zenjpeg::heuristics::estimate_decode;
use zenjpeg::decoder::PixelFormat;

let est = estimate_decode(1920, 1080, PixelFormat::Rgb);
println!("Output buffer: {:.1} MB", est.output_bytes as f64 / 1_000_000.0);
println!("Peak memory: {:.1} MB", est.peak_memory_bytes as f64 / 1_000_000.0);
println!("Time: {:.0}ms (typical)", est.time_ms);
```

--------------------------------

### PixelLayout Conversions

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/enum.PixelLayout.html

Conversion methods between PixelLayout and legacy PixelFormat.

```APIDOC
## impl From<PixelFormat> for PixelLayout
Converts from legacy PixelFormat to explicit PixelLayout.

## impl From<PixelLayout> for PixelFormat
Converts from PixelLayout to legacy PixelFormat.
```

--------------------------------

### MozjpegTables::generate

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.MozjpegTables.html

Generates encoding tables using mozjpeg’s quality scaling formula based on a provided quality level and preset.

```APIDOC
## MozjpegTables::generate(quality: u8, preset: QuantTablePreset) -> Box<EncodingTables>

### Description
Generates encoding tables using mozjpeg’s quality scaling formula. The quality value is converted to a scale factor using the standard libjpeg/mozjpeg formula.

### Parameters
- **quality** (u8) - Quality level 1-100 (higher = better quality, larger files).
- **preset** (QuantTablePreset) - Which base table variant to use.

### Returns
An EncodingTables object with the scaled luminance and chrominance tables.
```

--------------------------------

### Implement Stop for Option<T> in hot loops

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/trait.Stop.html

Demonstrates using Option<T> to optimize hot loops by conditionally checking stop status.

```rust
use enough::{Stop, StopReason, Unstoppable};

fn hot_loop(stop: &dyn Stop) -> Result<(), StopReason> {
    let stop = stop.may_stop().then_some(stop);
    for i in 0..1000 {
        stop.check()?; // None → Ok(()), Some → delegates
    }
    Ok(())
}

assert!(hot_loop(&Unstoppable).is_ok());
```

--------------------------------

### Import Encoder API Components

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/index.html

Import core types, configuration options, and result types from the encoder module.

```rust
use zenjpeg::encoder::{
    // Core types
    EncoderConfig,          // Builder for encoder configuration
    BytesEncoder,           // Encoder for raw byte buffers
    RgbEncoder,             // Encoder for rgb crate types
    YCbCrPlanarEncoder,     // Encoder for planar YCbCr

    // Configuration
    Quality,                // Quality settings (ApproxJpegli, ApproxMozjpeg, etc.)
    PixelLayout,            // Pixel format for raw bytes
    ChromaSubsampling,      // 4:4:4, 4:2:0, 4:2:2, 4:4:0
    ColorMode,              // YCbCr, XYB, Grayscale
    DownsamplingMethod,     // Box, GammaAware, GammaAwareIterative

    // Cancellation
    Stop,                   // Trait for cancellation tokens
    Unstoppable,            // Use when no cancellation needed

    // Results
    Error, Result,          // Error handling
};
```

--------------------------------

### Configure Encoder for JPEG Quality

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Initializes an EncoderConfig with specific quality and chroma subsampling settings, matching the behavior of jpeg_set_quality.

```rust
// Match jpeg_set_quality() behavior (2 tables)
let config = EncoderConfig::ycbcr(85, ChromaSubsampling::Quarter)
    .separate_chroma_tables(false);
```

--------------------------------

### Implement cooperative cancellation

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/index.html

Demonstrates how to pass a cancellation token to push methods, supporting both non-cancellable operations and atomic boolean flags.

```rust
use zenjpeg::encoder::Unstoppable;
use std::sync::atomic::AtomicBool;

// No cancellation
enc.push_packed(&data, Unstoppable)?;

// With AtomicBool
let cancel = AtomicBool::new(false);
enc.push_packed(&data, &cancel)?;
```

--------------------------------

### validate

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Validate the configuration, returning an error for invalid combinations.

```APIDOC
## pub fn validate(&self) -> Result<()>

### Description
Validate the configuration, returning an error for invalid combinations, such as progressive mode with disabled Huffman optimization.
```

--------------------------------

### Encode JPEG from Raw Bytes

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/index.html

Create an encoder configuration and encode raw RGB bytes into a JPEG image.

```rust
use zenjpeg::encoder::{EncoderConfig, ChromaSubsampling, PixelLayout, Unstoppable};

// Create reusable config (quality + color mode in constructor)
let config = EncoderConfig::ycbcr(85, ChromaSubsampling::Quarter)
    .progressive(true);

// Encode from raw bytes
let mut enc = config.encode_from_bytes(1920, 1080, PixelLayout::Rgb8Srgb)?;
enc.push_packed(&rgb_bytes, Unstoppable)?;
let jpeg = enc.finish()?;
```

--------------------------------

### Streaming Encoder Creation

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncodeRequest.html

Methods to initialize streaming encoders from various input types.

```APIDOC
## Streaming Encoder Methods

- **encode_from_bytes(width: u32, height: u32, layout: PixelLayout) -> Result<BytesEncoder>**: Create a streaming encoder from raw byte input.
- **encode_from_rgb<P: Pixel>(width: u32, height: u32) -> Result<RgbEncoder<P>>**: Create a streaming encoder from rgb crate pixel types.
- **encode_from_ycbcr_planar(width: u32, height: u32) -> Result<YCbCrPlanarEncoder>**: Create a streaming encoder from planar YCbCr data.
```

--------------------------------

### quant_source

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Sets the quantization table source. This is a convenience method, though quant_table_config is preferred for full control.

```APIDOC
## pub fn quant_source(self, source: QuantTableSource) -> Self

### Description
Sets the quantization table source. Convenience method for setting the source.

### Parameters
- **source** (QuantTableSource) - Required - The source for the quantization tables.
```

--------------------------------

### pub fn to_bytes(&self) -> Option<Vec<u8>>

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.ExifFields.html

Converts the configured EXIF fields into raw TIFF bytes.

```APIDOC
## pub fn to_bytes(&self) -> Option<Vec<u8>>

### Description
Convert to raw TIFF bytes. Returns None if no fields are set.

### Returns
- **Option<Vec<u8>>** - The raw TIFF bytes if fields are present, otherwise None.
```

--------------------------------

### pub fn tables(self, tables: Box<EncodingTables>) -> Self

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Applies custom encoding tables for experimentation, replacing default quantization tables and zero-bias configuration.

```APIDOC
## pub fn tables(self, tables: Box<EncodingTables>) -> Self

### Description
Apply custom encoding tables for experimentation. This replaces both quantization tables and zero-bias configuration with values from the provided `EncodingTables`.

### Notes
- Tables must match the color mode (YCbCr or XYB).
- When using `ScalingParams::Exact`, quality scaling is bypassed.
- When using `ScalingParams::Scaled`, tables are scaled by quality.
```

--------------------------------

### Using may_stop with dyn Stop

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/trait.Stop.html

Demonstrates using may_stop to optimize hot loops when working with dynamic dispatch.

```rust
use enough::{Stop, StopReason, Unstoppable};

fn process(stop: &dyn Stop) -> Result<(), StopReason> {
    let stop = stop.may_stop().then_some(stop);
    // stop is Option<&dyn Stop>, which impl Stop:
    // None → check() always returns Ok(()), Some → delegates
    for i in 0..100 {
        stop.check()?;
    }
    Ok(())
}

// Unstoppable: may_stop() returns false, so stop is None
assert!(process(&Unstoppable).is_ok());
```

--------------------------------

### DecodePool::new

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodePool.html

Creates a new instance of DecodePool with the default parallel threshold of 4.

```APIDOC
## pub fn new() -> Self

### Description
Creates a new decode pool with the default parallel threshold (4). This threshold balances single-image latency and total system throughput.
```

--------------------------------

### pub fn restart_mcu_rows(self, rows: u16) -> Self

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Sets the restart marker interval in MCU rows. Restart markers enable parallel decoding, error recovery, and random access.

```APIDOC
## pub fn restart_mcu_rows(self, rows: u16) -> Self

### Description
Set the restart marker interval in MCU rows (default: 4). This guarantees MCU-row-aligned restart boundaries, which is required for the fused chroma upsample and color conversion decode path.

### Parameters
- **rows** (u16) - The number of MCU rows between restart markers. Use 0 to disable restart markers.
```

--------------------------------

### Profile encoder phases with profile_scope

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/profile/index.html

Use profile_scope! to measure execution time of a block and ProfileStats::print_summary to output results.

```rust
profile_scope!("dct");
// ... do DCT work ...
// automatically records time when scope ends

// At end of encode:
ProfileStats::print_summary();
```

--------------------------------

### Limits Configuration

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.Limits.html

The Limits struct provides builder methods to configure resource constraints for encoding and decoding operations.

```APIDOC
## struct Limits

### Description
Resource limits for encoding and decoding operations. All fields are `Option<u64>` where `None` means no limit.

### Methods
- **max_pixels(pixels: u64) -> Self**: Sets the maximum number of pixels allowed (width * height).
- **max_memory(bytes: u64) -> Self**: Sets the maximum total memory allocation in bytes.
- **max_output(bytes: u64) -> Self**: Sets the maximum output size in bytes.
- **effective_max_pixels() -> u64**: Returns the pixel limit, or `u64::MAX` if unlimited.
- **effective_max_memory() -> u64**: Returns the memory limit, or `u64::MAX` if unlimited.
- **effective_max_output() -> u64**: Returns the output size limit, or `u64::MAX` if unlimited.

### Example
```rust
use zenjpeg::encoder::Limits;

let limits = Limits::default()
    .max_pixels(100_000_000)
    .max_memory(512 * 1024 * 1024)
    .max_output(50 * 1024 * 1024);
```
```

--------------------------------

### Estimate Memory Usage for Encoding

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/index.html

Calculate typical and upper-bound memory requirements for a specific image resolution and encoder configuration.

```rust
use zenjpeg::{EncoderConfig, ChromaSubsampling};

let config = EncoderConfig::ycbcr(85.0, ChromaSubsampling::Quarter);

// Typical estimate
let estimate = config.estimate_memory(1920, 1080);

// Guaranteed upper bound
let ceiling = config.estimate_memory_ceiling(1920, 1080);
```

--------------------------------

### Accessing JPEG Probe Data

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/decoder/struct.DecodedExtras.html

Retrieve and display encoder information and quality estimates from the JPEG header analysis.

```rust
let extras = decoded.extras().unwrap();
if let Some(probe) = extras.probe() {
    println!("Encoder: {:?}", probe.encoder);
    println!("Quality: {:.0} ({:?})", probe.quality.value, probe.quality.scale);
}
```

--------------------------------

### Configure Quantization Tables

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Sets the quantization table configuration using the type-safe QuantTableConfig enum.

```rust
use zenjpeg::encode::{EncoderConfig, ChromaSubsampling, QuantTableConfig};

let config = EncoderConfig::ycbcr(85, ChromaSubsampling::Quarter)
    .quant_table_config(QuantTableConfig::MozjpegRobidoux);
```

--------------------------------

### request

Source: https://docs.rs/zenjpeg/0.8.4/zenjpeg/encoder/struct.EncoderConfig.html

Create a per-image encode request from this config.

```APIDOC
## pub fn request(&self) -> EncodeRequest<'_>

### Description
Create a per-image encode request from this config. Returns an EncodeRequest that can bind per-image metadata (ICC, EXIF, XMP) and controls without modifying the reusable config.
```