### Folded instructions example

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=

Example output of folded instructions for a simple add function, as shown in the fold_instructions documentation.

```wasm
(module
    (func $foo (param i32 i32) (result i32)
        (i32.add
            (local.get 0)
            (local.get 1))
    )
)
```

--------------------------------

### Start print_instantiation_arg function

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=std%3A%3Avec

Starts the function that prints a single core instantiation argument.

```rust
pub(crate) fn print_instantiation_arg(
    &mut self,
    state: &State,
    arg: &InstantiationArg,
) -> Result<()> {
```

--------------------------------

### print_component_start

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=

Prints a component start function: writes a newline, starts a "start " group, prints the function index, then iterates over arguments and results, printing "value " and "result value " groups. Increments the component values counter for each result.

```rust
self.newline(offset)?;
self.start_group("start ")?;
self.print_idx(&state.component.func_names, start.func_index)?;

for arg in start.arguments.iter() {
    self.result.write_str(" ")?;
    self.start_group("value ")?;
    self.print_idx(&state.component.value_names, *arg)?;
    self.end_group()?;
}

for _ in 0..start.results {
    self.result.write_str(" ")?;
    self.start_group("result ")?;
    self.start_group("value ")?;
    self.print_name(&state.component.value_names, state.component.values)?;
    self.end_group()?;
    self.end_group()?;
    state.component.values += 1;
}

self.end_group()?; // start

Ok(())
```

--------------------------------

### PrintFmtWrite::start_line

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintFmtWrite.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Indicates that a new line in the output is starting at the binary_offset provided.

```APIDOC
## [METHOD] [ENDPOINT]

### Description
Indicates that a new line in the output is starting at the `binary_offset` provided.

### Method
N/A

### Endpoint
N/A

### Parameters
#### Path Parameters
- **binary_offset** (Option<u64>) - Required - The binary offset of the new line.

### Request Example
N/A

### Response
#### Success Response (200)
- **result** (Result) - The result of the start line operation.

#### Response Example
N/A
```

--------------------------------

### Config::offsets_and_lines

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.Config.html?search=

Gets line-by-line WAT disassembly with binary offsets for each line.

```APIDOC
## Config::offsets_and_lines

### Description
Get the line-by-line WAT disassembly for the given Wasm, along with the binary offsets for each line.

### Method
`pub fn offsets_and_lines<'a>(&self, wasm: &[u8], storage: &'a mut String) -> Result<impl Iterator<Item = (Option<u64>, &'a str)> + 'a>`

### Parameters
- **wasm** (&[u8]) - Required - The WebAssembly binary to disassemble.
- **storage** (&'a mut String) - Required - A mutable string buffer used to store the output.

### Returns
- `Result<impl Iterator<Item = (Option<u64>, &'a str)> + 'a>` - An iterator yielding pairs of optional binary offset and line text.
```

--------------------------------

### PrintIoWrite::start_line

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintIoWrite.html?search=

Indicates that a new line in the output is starting at the binary_offset provided.

```APIDOC
## start_line

### Description
Indicates that a new line in the output is starting at the `binary_offset` provided.

### Method
`fn start_line(&mut self, binary_offset: Option<u64>)`

### Parameters
- `binary_offset` (Option<u64>) - The binary offset of the start of the line.

### Returns
- No return value.
```

--------------------------------

### Print::start_line

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/print.rs.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Indicates that a new line in the output is starting at the provided binary offset. Enables correlating binary offsets to lines in the output.

```APIDOC
## [TRAIT_METHOD] Print::start_line

### Description
Indicates that a new line in the output is starting at the `binary_offset` provided. Not all new lines have a binary offset associated with them but this method should be called for new lines in the output. This enables correlating binary offsets to lines in the output.

### Method
`fn start_line(&mut self, binary_offset: Option<u64>)`

### Parameters
- **binary_offset** (`Option<u64>`) - Required - The binary offset of the new line, if any.

### Returns
- `()` - No return value.

### Default Implementation
Does nothing.

### Example
```rust
use wasmprinter::Print;

struct MyPrinter;

impl Print for MyPrinter {
    fn start_line(&mut self, binary_offset: Option<u64>) {
        // handle line start
    }
}
```
```

--------------------------------

### print_core_instantiation_arg

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=

Prints a core instantiation argument by starting a group with "with ", writing the argument name, then handling the instance kind by printing the instance index. Ends the group and returns Ok.

```rust
self.start_group("with ")?;
self.print_str(arg.name)?;
self.result.write_str(" ")?;
match arg.kind {
    InstantiationArgKind::Instance => {
        self.start_group("instance ")?;
        self.print_idx(&state.core.instance_names, arg.index)?;
        self.end_group()?;
    }
}
self.end_group()?;
Ok(())
```

--------------------------------

### Config::new constructor

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.Config.html?search=

Creates a new Config object that's ready to start printing wasm binaries to strings.

```rust
pub fn new() -> Self
```

--------------------------------

### PrintTermcolor::start_line

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintTermcolor.html?search=std%3A%3Avec

Indicates that a new line in the output is starting at the `binary_offset` provided.

```APIDOC
## start_line

### Description
Indicates that a new line in the output is starting at the `binary_offset` provided.

### Method
`fn start_line(&mut self, binary_offset: Option<u64>)`

### Parameters
- `binary_offset` (Option<u64>) - Required - The binary offset of the new line.

### Returns
None.
```

--------------------------------

### Start a group in wasmprinter output

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=std%3A%3Avec

Starts a new group in the output by writing an opening parenthesis, the group name, and resetting color. Increments nesting and records the current line for later group closing.

```rust
fn start_group(&mut self, name: &str) -> Result<()> {
    write!(self.result, "(")?;
    self.result.start_keyword()?;
    write!(self.result, "{name}")?;
    self.result.reset_color()?;
    self.nesting += 1;
    self.group_lines.push(self.line);
    Ok(())
}
```

--------------------------------

### Start group for component external kind

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=std%3A%3Avec

Starts a group with a label corresponding to the given component external kind. The label is used as a prefix for the printed name.

```rust
match kind {
            ComponentExternalKind::Module => {
                self.start_group("core module ")?;
            }
            ComponentExternalKind::Component => {
                self.start_group("component ")?;
            }
            ComponentExternalKind::Instance => {
                self.start_group("instance ")?;
            }
            ComponentExternalKind::Func => {
                self.start_group("func ")?;
            }
            ComponentExternalKind::Value => {
                self.start_group("value ")?;
            }
            ComponentExternalKind::Type => {
                self.start_group("type ")?;
            }
        }
        Ok(())
```

--------------------------------

### NamedLocalPrinter::start_local

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html

Starts printing a local, handling named locals and group management.

```rust
fn start_local(
        &mut self,
        names_for: ParameterNames,
        local: u32,
        dst: &mut Printer,
        state: &State,
    ) -> Result<()> {
        let name = match names_for {
            ParameterNames::Type(ty) => state.core.parameter_names.index_to_name.get(&(ty, local)),
            ParameterNames::Tag(ty) => state
                .core
                .tag_parameter_names
                .index_to_name
                .get(&(ty, local)),
            ParameterNames::Locals(func) => {
                state.core.local_names.index_to_name.get(&(func, local))
            }
            ParameterNames::None => None,
        };

        // Named locals must be in their own group, so if we have a name we need
        // to terminate the previous group.
        if name.is_some() && self.in_group {
            dst.end_group()?;
            self.in_group = false;
        }

        if self.first {
            self.first = false;
        } else {
            dst.result.write_str(" ")?;
        }

        // Next we either need a separator if we're already in a group or we
        // need to open a group for our new local.
        if !self.in_group {
            dst.start_group(self.group_name)?;
            dst.result.write_str(" ")?;
            self.in_group = true;
        }

        // Print the optional name if given...
        match name {
            Some(name) => {
                name.write(dst)?;
                dst.result.write_str(" ")?;
                self.end_group_after_local = true;
            }
            None if dst.config.name_unnamed && matches!(names_for, ParameterNames::Locals(_)) => {
                write!(dst.result, "$#local{local} ")?;
                self.end_group_after_local = true;
            }
            None => {
                self.end_group_after_local = false;
            }
        }
        Ok(())
    }
```

--------------------------------

### print_component_instantiation_arg

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=

Prints a component instantiation argument by starting a group with "with ", writing the argument name, then printing the component external kind. Ends the group and returns Ok.

```rust
self.start_group("with ")?;
self.print_str(arg.name)?;
self.result.write_str(" ")?;
self.print_component_external_kind(state, arg.kind, arg.index)?;
self.end_group()?;
Ok(())
```

--------------------------------

### Config::offsets_and_lines method

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.Config.html?search=

Get the line-by-line WAT disassembly for the given Wasm, along with the binary offsets for each line.

```rust
pub fn offsets_and_lines<'a>(
    &self,
    wasm: &[u8],
    storage: &'a mut String,
) -> Result<impl Iterator<Item = (Option<u64>, &'a str)> + 'a>
```

--------------------------------

### Print::start_line

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/print.rs.html?search=std%3A%3Avec

Indicates that a new line in the output is starting at the `binary_offset` provided. Not all new lines have a binary offset associated with them but this method should be called for new lines in the output.

```APIDOC
## [TRAIT_METHOD] Print::start_line

### Description
Indicates that a new line in the output is starting at the `binary_offset` provided. Not all new lines have a binary offset associated with them but this method should be called for new lines in the output. This enables correlating binary offsets to lines in the output.

### Method
`fn start_line(&mut self, binary_offset: Option<u64>)`

### Parameters
- **binary_offset** (`Option<u64>`) - Required - The binary offset of the new line, if any.

### Returns
- `()` - No return value.

### Default Implementation
Does nothing.

### Example
```rust
use wasmprinter::Print;

struct MyPrinter;
impl Print for MyPrinter {
    fn start_line(&mut self, binary_offset: Option<u64>) {
        if let Some(offset) = binary_offset {
            println!("Line at offset {}", offset);
        }
    }
}
```
```

--------------------------------

### print_import method

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=

Prints a single import by starting an import group, writing module, name, and import type.

```rust
fn print_import(&mut self, state: &State, import: &Import<'_>, index: bool) -> Result<()> {
    self.start_group("import ")?;
    self.print_str(import.module)?;
    self.result.write_str(" ")?;
    self.print_str(import.name)?;
    self.result.write_str(" ")?;
    self.print_import_ty(state, &import.ty, index)?;
    self.end_group()?;
    Ok(())
}
```

--------------------------------

### start_group and end_group helper functions

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

These functions manage the opening and closing of groups in the output. `start_group` writes an opening parenthesis, starts a keyword, writes the group name, resets color, increments nesting, and records the current line. `end_group` decrements nesting, pops the recorded line, adds a newline if needed, and writes a closing parenthesis.

```rust
    fn start_group(&mut self, name: &str) -> Result<()> {
        write!(self.result, "(")?;
        self.result.start_keyword()?;
        write!(self.result, "{name}")?;
        self.result.reset_color()?;
        self.nesting += 1;
        self.group_lines.push(self.line);
        Ok(())
    }

    fn end_group(&mut self) -> Result<()> {
        self.nesting -= 1;
        if let Some(line) = self.group_lines.pop() {
            if line != self.line {
                self.newline_unknown_pos()?;
            }
        }
        self.result.write_str(")")?;
        Ok(())
    }
```

--------------------------------

### Get line-by-line WAT disassembly with binary offsets

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=

Returns an iterator over (binary offset, line) pairs for the WAT disassembly. Uses a custom Print implementation to track line start positions and offsets.

```rust
pub fn offsets_and_lines<'a>(
    &self,
    wasm: &[u8],
    storage: &'a mut String,
) -> Result<impl Iterator<Item = (Option<u64>, &'a str)> + 'a> {
    struct TrackingPrint<'a> {
        dst: &'a mut String,
        lines: Vec<usize>,
        line_offsets: Vec<Option<u64>>,
    }

    impl Print for TrackingPrint<'_> {
        fn write_str(&mut self, s: &str) -> io::Result<()> {
            self.dst.push_str(s);
            Ok(())
        }
        fn start_line(&mut self, offset: Option<u64>) {
            self.lines.push(self.dst.len());
            self.line_offsets.push(offset);
        }
    }

    let mut output = TrackingPrint {
        dst: storage,
        lines: Vec::new(),
        line_offsets: Vec::new(),
    };
    self.print(wasm, &mut output)?;

    let TrackingPrint {
        dst,
        lines,
        line_offsets,
    } = output;
    let end = dst.len();
    let dst = &dst[..];
    let mut offsets = line_offsets.into_iter();
    let mut lines = lines.into_iter().peekable();

    Ok(std::iter::from_fn(move || {
        let offset = offsets.next()?;
        let i = lines.next()?;
        let j = lines.peek().copied().unwrap_or(end);
        let line = &dst[i..j];
        Some((offset, line))
    }))
}
```

--------------------------------

### Print::start_keyword

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/print.rs.html?search=std%3A%3Avec

Sets the colors settings for a keyword (`(module ...)`) to be printed.

```APIDOC
## [TRAIT_METHOD] Print::start_keyword

### Description
Sets the colors settings for a keyword (`(module ...)`) to be printed.

### Method
`fn start_keyword(&mut self) -> io::Result<()>`

### Parameters
None.

### Returns
- `io::Result<()>` - Ok(()) on success, or an I/O error.

### Default Implementation
Does nothing.

### Example
```rust
use wasmprinter::Print;

struct MyPrinter;
impl Print for MyPrinter {
    fn start_keyword(&mut self) -> std::io::Result<()> {
        print!("\x1b[34m"); // blue
        Ok(())
    }
}
```
```

--------------------------------

### Print::start_keyword

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/print.rs.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Sets the colors settings for a keyword (`(module ...)`) to be printed.

```APIDOC
## [TRAIT_METHOD] Print::start_keyword

### Description
Sets the colors settings for a keyword (`(module ...)`) to be printed.

### Method
`fn start_keyword(&mut self) -> io::Result<()>`

### Parameters
None

### Returns
- `io::Result<()>` - Ok(()) on success, or an I/O error.

### Default Implementation
Does nothing.

### Example
```rust
use wasmprinter::Print;
use std::io;

struct MyPrinter;

impl Print for MyPrinter {
    fn start_keyword(&mut self) -> io::Result<()> {
        // set color for keywords
        Ok(())
    }
}
```
```

--------------------------------

### PrintIoWrite::start_keyword

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintIoWrite.html?search=

Sets the colors settings for a keyword (`(module ...)`) to be printed.

```APIDOC
## start_keyword

### Description
Sets the colors settings for a keyword (`(module ...)`) to be printed.

### Method
`fn start_keyword(&mut self) -> Result<()>`

### Returns
- `Result<()>` - Ok if successful, or an error.
```

--------------------------------

### Config::print

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.Config.html?search=

Prints a WebAssembly binary to the given output in the WebAssembly Text Format.

```APIDOC
## Config::print

### Description
Print a WebAssembly binary. This function takes an entire `wasm` binary blob and prints it to the `result` in the WebAssembly Text Format.

### Method
`pub fn print(&self, wasm: &[u8], result: &mut impl Print) -> Result<()>`

### Parameters
- **wasm** (&[u8]) - Required - The WebAssembly binary to print.
- **result** (&mut impl Print) - Required - The output sink to write the text format to.

### Returns
- `Result<()>` - Ok if printing succeeded, or an error.
```

--------------------------------

### Operand stack types example

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=

Example output showing operand stack types within function bodies, as shown in the print_operand_stack documentation.

```wasm
(module
  (type (;0;) (func))
  (func (;0;) (type 0)
    i32.const 4
    ;; [i32]
    i32.const 5
    ;; [i32 i32]
    i32.add
    ;; [i32]
    drop
    ;; []
  )
)
```

--------------------------------

### PrintFmtWrite::start_keyword

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintFmtWrite.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Sets the colors settings for a keyword ((module ...)) to be printed.

```APIDOC
## [METHOD] [ENDPOINT]

### Description
Sets the colors settings for a keyword (`(module ...)`) to be printed.

### Method
N/A

### Endpoint
N/A

### Parameters
None

### Request Example
N/A

### Response
#### Success Response (200)
- **result** (Result) - The result of the color setting operation.

#### Response Example
N/A
```

--------------------------------

### Print intrinsic function

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=std%3A%3Avec

Prints an intrinsic function by starting a 'core func' group, printing the function name, then starting the provided group, invoking the body closure, and ending both groups.

```rust
self.start_group("core func ")?;
        self.print_name(&state.core.func_names, state.core.funcs)?;
        self.result.write_str(" ")?;
        self.start_group(group)?;
        body(self, state)?;
        self.end_group()?;
        self.end_group()?;
```

--------------------------------

### Print::start_name

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/print.rs.html?search=std%3A%3Avec

Sets the colors settings for a name (`$foo`) to be printed.

```APIDOC
## [TRAIT_METHOD] Print::start_name

### Description
Sets the colors settings for a name (`$foo`) to be printed.

### Method
`fn start_name(&mut self) -> io::Result<()>`

### Parameters
None.

### Returns
- `io::Result<()>` - Ok(()) on success, or an I/O error.

### Default Implementation
Does nothing.

### Example
```rust
use wasmprinter::Print;

struct MyPrinter;
impl Print for MyPrinter {
    fn start_name(&mut self) -> std::io::Result<()> {
        print!("\x1b[36m"); // cyan
        Ok(())
    }
}
```
```

--------------------------------

### Print::start_name

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/print.rs.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Sets the colors settings for a name (`$foo`) to be printed.

```APIDOC
## [TRAIT_METHOD] Print::start_name

### Description
Sets the colors settings for a name (`$foo`) to be printed.

### Method
`fn start_name(&mut self) -> io::Result<()>`

### Parameters
None

### Returns
- `io::Result<()>` - Ok(()) on success, or an I/O error.

### Default Implementation
Does nothing.

### Example
```rust
use wasmprinter::Print;
use std::io;

struct MyPrinter;

impl Print for MyPrinter {
    fn start_name(&mut self) -> io::Result<()> {
        // set color for names
        Ok(())
    }
}
```
```

--------------------------------

### PrintIoWrite::start_name

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintIoWrite.html?search=

Sets the colors settings for a name ($foo) to be printed.

```APIDOC
## start_name

### Description
Sets the colors settings for a name (`$foo`) to be printed.

### Method
`fn start_name(&mut self) -> Result<()>`

### Returns
- `Result<()>` - Ok if successful, or an error.
```

--------------------------------

### Config::new and builder methods

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html

Provides the Config constructor and builder methods for print_offsets, print_skeleton, name_unnamed, fold_instructions, print_operand_stack, and indent_text. Each returns &mut Self for chaining.

```rust
impl Config {
    /// Creates a new [`Config`] object that's ready to start printing wasm
    /// binaries to strings.
    pub fn new() -> Self {
        Self::default()
    }

    /// Whether or not to print binary offsets of each item as comments in the
    /// text format whenever a newline is printed.
    pub fn print_offsets(&mut self, print: bool) -> &mut Self {
        self.print_offsets = print;
        self
    }

    /// Whether or not to print only a "skeleton" which skips function bodies,
    /// data segment contents, element segment contents, etc.
    pub fn print_skeleton(&mut self, print: bool) -> &mut Self {
        self.print_skeleton = print;
        self
    }

    /// Assign names to all unnamed items.
    ///
    /// If enabled then any previously unnamed item will have a name synthesized
    /// that looks like `$#func10` for example. The leading `#` indicates that
    /// it's `wasmprinter`-generated. The `func` is the namespace of the name
    /// and provides extra context about the item when referenced. The 10 is the
    /// local index of the item.
    ///
    /// Note that if the resulting text output is converted back to binary the
    /// resulting `name` custom section will not be the same as before.
    pub fn name_unnamed(&mut self, enable: bool) -> &mut Self {
        self.name_unnamed = enable;
        self
    }

    /// Print instructions in folded form where possible.
    ///
    /// This will cause printing to favor the s-expression (parenthesized) form
    /// of WebAssembly instructions. For example this output would be generated
    /// for a simple `add` function:
    ///
    /// ```wasm
    /// (module
    ///     (func $foo (param i32 i32) (result i32)
    ///         (i32.add
    ///             (local.get 0)
    ///             (local.get 1))
    ///     )
    /// )
    /// ```
    pub fn fold_instructions(&mut self, enable: bool) -> &mut Self {
        self.fold_instructions = enable;
        self
    }

    /// Print the operand stack types within function bodies,
    /// flagging newly pushed operands when color output is enabled. E.g.:
    ///
    /// ```wasm
    /// (module
    ///   (type (;0;) (func))
    ///   (func (;0;) (type 0)
    ///     i32.const 4
    ///     ;; [i32]
    ///     i32.const 5
    ///     ;; [i32 i32]
    ///     i32.add
    ///     ;; [i32]
    ///     drop
    ///     ;; []
    ///   )
    /// )
    /// ```
    #[cfg(feature = "validate")]
    pub fn print_operand_stack(&mut self, enable: bool) -> &mut Self {
        self.print_operand_stack = enable;
        self
    }

    /// Select the string to use when indenting.
    ///
    /// The indent allowed here are arbitrary and unchecked. You should enter
    /// blank text like `" "` or `"\t"`, rather than something like `"(;;)"`.
    ///
    /// The default setting is double spaces `" "`
    pub fn indent_text(&mut self, text: impl Into<String>) -> &mut Self {
        self.indent_text = text.into();
        self
    }

    /// Print a WebAssembly binary.
    ///
    /// This function takes an entire `wasm` binary blob and prints it to the
    /// `result` in the WebAssembly Text Format.
    pub fn print(&self, wasm: &[u8], result: &mut impl Print) -> Result<()> {
```

--------------------------------

### Initialize Printer and print WAT disassembly

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=

Initializes a Printer with default settings and calls print_contents to generate WAT disassembly for the given Wasm bytes.

```rust
result,
code_section_hints: Vec::new(),
group_lines: Vec::new(),
line: 0,
nesting: 0,
}
.print_contents(wasm)
```

--------------------------------

### print_type_keyword method

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=

Prints a type keyword by starting a type group, writing the keyword, and resetting color.

```rust
fn print_type_keyword(&mut self, keyword: &str) -> Result<()> {
    self.result.start_type()?;
    self.result.write_str(keyword)?;
    self.result.reset_color()?;
    Ok(())
}
```

--------------------------------

### PrintFmtWrite::start_name

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintFmtWrite.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Sets the colors settings for a name ($foo) to be printed.

```APIDOC
## [METHOD] [ENDPOINT]

### Description
Sets the colors settings for a name (`$foo`) to be printed.

### Method
N/A

### Endpoint
N/A

### Parameters
None

### Request Example
N/A

### Response
#### Success Response (200)
- **result** (Result) - The result of the color setting operation.

#### Response Example
N/A
```

--------------------------------

### Config::new

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.Config.html?search=

Creates a new Config object ready to print wasm binaries.

```APIDOC
## Config::new

### Description
Creates a new `Config` object that’s ready to start printing wasm binaries to strings.

### Method
`pub fn new() -> Self`

### Parameters
None.

### Returns
- `Self` - A new `Config` instance.
```

--------------------------------

### Config

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.Config.html

Configuration for printing WebAssembly binaries to text format.

```APIDOC
## Config::new

### Description
Creates a new `Config` object that's ready to start printing wasm binaries to strings.

### Method
`pub fn new() -> Self`

### Parameters
None.

### Returns
A new `Config` instance.

```

```APIDOC
## Config::print_offsets

### Description
Sets whether to print binary offsets of each item as comments in the text format whenever a newline is printed.

### Method
`pub fn print_offsets(&mut self, print: bool) -> &mut Self`

### Parameters
- **print** (bool) - Required - Whether to print offsets.

### Returns
A mutable reference to `self` for chaining.

```

```APIDOC
## Config::print_skeleton

### Description
Sets whether to print only a "skeleton" which skips function bodies, data segment contents, element segment contents, etc.

### Method
`pub fn print_skeleton(&mut self, print: bool) -> &mut Self`

### Parameters
- **print** (bool) - Required - Whether to print skeleton.

### Returns
A mutable reference to `self` for chaining.

```

```APIDOC
## Config::name_unnamed

### Description
Assign names to all unnamed items. If enabled, any previously unnamed item will have a name synthesized that looks like `$#func10` for example. The leading `#` indicates that it's `wasmprinter`-generated. The `func` is the namespace of the name and provides extra context about the item when referenced. The `10` is the local index of the item.

### Method
`pub fn name_unnamed(&mut self, enable: bool) -> &mut Self`

### Parameters
- **enable** (bool) - Required - Whether to enable naming of unnamed items.

### Returns
A mutable reference to `self` for chaining.

```

```APIDOC
## Config::fold_instructions

### Description
Print instructions in folded form where possible. This will cause printing to favor the s-expression (parenthesized) form of WebAssembly instructions.

### Method
`pub fn fold_instructions(&mut self, enable: bool) -> &mut Self`

### Parameters
- **enable** (bool) - Required - Whether to enable folded instruction printing.

### Returns
A mutable reference to `self` for chaining.

```

```APIDOC
## Config::print_operand_stack

### Description
Print the operand stack types within function bodies, flagging newly pushed operands when color output is enabled. Available on **crate feature `validate`** only.

### Method
`pub fn print_operand_stack(&mut self, enable: bool) -> &mut Self`

### Parameters
- **enable** (bool) - Required - Whether to enable operand stack printing.

### Returns
A mutable reference to `self` for chaining.

```

```APIDOC
## Config::indent_text

### Description
Select the string to use when indenting. The indent allowed here are arbitrary and unchecked. You should enter blank text like `" "` or `"\t"`, rather than something like `"(;;)"`. The default setting is double spaces `"  "`.

### Method
`pub fn indent_text(&mut self, text: impl Into<String>) -> &mut Self`

### Parameters
- **text** (impl Into<String>) - Required - The string to use for indentation.

### Returns
A mutable reference to `self` for chaining.

```

```APIDOC
## Config::print

### Description
Print a WebAssembly binary. This function takes an entire `wasm` binary blob and prints it to the `result` in the WebAssembly Text Format.

### Method
`pub fn print(&self, wasm: &[u8], result: &mut impl Print) -> Result<()>`

### Parameters
- **wasm** (&[u8]) - Required - The WebAssembly binary to print.
- **result** (&mut impl Print) - Required - The output sink to print to.

### Returns
A `Result<()>` indicating success or failure.

```

```APIDOC
## Config::offsets_and_lines

### Description
Get the line-by-line WAT disassembly for the given Wasm, along with the binary offsets for each line.

### Method
`pub fn offsets_and_lines<'a>(&self, wasm: &[u8], storage: &'a mut String) -> Result<impl Iterator<Item = (Option<u64>, &'a str)> + 'a>`

### Parameters
- **wasm** (&[u8]) - Required - The WebAssembly binary to disassemble.
- **storage** (&'a mut String) - Required - A mutable string to store the disassembly output.

### Returns
A `Result` containing an iterator of `(Option<u64>, &'a str)` pairs, where the first element is the binary offset (if available) and the second is the line of WAT text.

```

--------------------------------

### Print resume_table (resume_table)

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/operator.rs.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Prints a resume_table instruction with its on clauses. Temporarily adjusts nesting for label handling and prints each handler variant.

```rust
fn resume_table(&mut self, table: ResumeTable) -> Result<()> {
    // The start_group("resume/resume_throw") have already
    // increased the nesting depth, but the labels are defined
    // above this `resume` or `resume_throw`. Therefore we
    // temporarily decrement this nesting count and increase it
    // below after printing the on clauses.
    self.printer.nesting -= 1;
    for handle in table.handlers {
        self.result().write_str(" ")?;
        self.printer.start_group("on")?;
        match handle {
            Handle::OnLabel { tag, label } => {
                self.tag_index(tag)?;
                self.relative_depth(label)?;
            }
            Handle::OnSwitch { tag } => {
                self.tag_index(tag)?;
                self.result().write_str(" switch")?;
            }
        }
        self.printer.end_group()?;
    }
    self.printer.nesting += 1;
    Ok(())
}
```

--------------------------------

### Payload rules for I32Const and I64Const

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/operator.rs.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Payload rules for I32Const and I64Const. They start a literal, write the value with a leading space, and reset the color.

```rust
632    (payload $self:ident I32Const $val:ident) => (
633        $self.result().start_literal()?;
634        write!($self.result(), " {}", $val)?;
635        $self.result().reset_color()?;
636    );
637    (payload $self:ident I64Const $val:ident) => (
638        $self.result().start_literal()?;
639        write!($self.result(), " {}", $val)?;
640        $self.result().reset_color()?;
641    );
```

--------------------------------

### Print component type reference

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html

Prints a component type reference by starting a group, printing the index using the component type names, and ending the group.

```rust
pub(crate) fn print_component_type_ref(&mut self, state: &State, idx: u32) -> Result<()> {
    self.start_group("type ")?;
    self.print_idx(&state.component.type_names, idx)?;
    self.end_group()?;
    Ok(())
}
```

--------------------------------

### End a group at a given offset

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=std%3A%3Avec

Ends a group at a specific byte offset, adding a newline if offsets are printed or if the group started on a different line. Writes a closing parenthesis.

```rust
fn end_group_at_pos(&mut self, offset: u64) -> Result<()> {
    self.nesting -= 1;
    let start_group_line = self.group_lines.pop();
    if self.config.print_offsets {
        self.newline(offset)?;
    } else if let Some(line) = start_group_line {
        if line != self.line {
            self.newline(offset)?;
        }
    }
    self.result.write_str(")")?;
    Ok(())
}
```

--------------------------------

### Print::start_type

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/print.rs.html?search=std%3A%3Avec

Sets the colors settings for a type (`(param i32)`) to be printed.

```APIDOC
## [TRAIT_METHOD] Print::start_type

### Description
Sets the colors settings for a type (`(param i32)`) to be printed.

### Method
`fn start_type(&mut self) -> io::Result<()>`

### Parameters
None.

### Returns
- `io::Result<()>` - Ok(()) on success, or an I/O error.

### Default Implementation
Does nothing.

### Example
```rust
use wasmprinter::Print;

struct MyPrinter;
impl Print for MyPrinter {
    fn start_type(&mut self) -> std::io::Result<()> {
        print!("\x1b[35m"); // magenta
        Ok(())
    }
}
```
```

--------------------------------

### Print::start_type

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/print.rs.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Sets the colors settings for a type (`(param i32)`) to be printed.

```APIDOC
## [TRAIT_METHOD] Print::start_type

### Description
Sets the colors settings for a type (`(param i32)`) to be printed.

### Method
`fn start_type(&mut self) -> io::Result<()>`

### Parameters
None

### Returns
- `io::Result<()>` - Ok(()) on success, or an I/O error.

### Default Implementation
Does nothing.

### Example
```rust
use wasmprinter::Print;
use std::io;

struct MyPrinter;

impl Print for MyPrinter {
    fn start_type(&mut self) -> io::Result<()> {
        // set color for types
        Ok(())
    }
}
```
```

--------------------------------

### define_visit! macro: payload rules for I32Const and I64Const

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/operator.rs.html

These rules print constant values as literals, starting a literal group, writing the value with a leading space, and resetting the color.

```rust
    (payload $self:ident I32Const $val:ident) => (
        $self.result().start_literal()?;
        write!($self.result(), " {}", $val)?;
        $self.result().reset_color()?;
    );
    (payload $self:ident I64Const $val:ident) => (
        $self.result().start_literal()?;
        write!($self.result(), " {}", $val)?;
        $self.result().reset_color()?;
    );
```

--------------------------------

### print_types: Iterate over type section entries

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=std%3A%3Avec

This snippet shows the print_types function that iterates over a TypeSectionReader, printing each type with its offset. It uses into_iter_with_offsets to get offset and rec_group pairs.

```rust
    fn print_types(&mut self, state: &mut State, parser: TypeSectionReader<'_>) -> Result<()> {
        for ty in parser.into_iter_with_offsets() {
            let (offset, rec_group) = ty?;
            self.newline(offset)?;
            self.print_rec(state, Some(offset), rec_group, false)?;
        }
        Ok(())
    }
```

--------------------------------

### print_file

Source: https://docs.rs/wasmprinter/latest/wasmprinter/fn.print_file.html

Reads a WebAssembly file from the filesystem and prints it into an in-memory `String`.

```APIDOC
## Function `print_file`

### Description
Reads a WebAssembly file from the filesystem and prints it into an in-memory `String`.

### Signature
```rust
pub fn print_file(file: impl AsRef<Path>) -> Result<String>
```

### Parameters
- **file** (`impl AsRef<Path>`) - Required - The path to the WebAssembly file to read and print.

### Returns
- `Result<String>` - The printed WebAssembly representation as a `String`, or an error if reading or printing fails.
```

--------------------------------

### End a group in wasmprinter output

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=std%3A%3Avec

Ends a group by decrementing nesting, adding a newline if the group started on a different line, and writing a closing parenthesis. Uses `newline_unknown_pos` when the position is not known.

```rust
fn end_group(&mut self) -> Result<()> {
    self.nesting -= 1;
    if let Some(line) = self.group_lines.pop() {
        if line != self.line {
            self.newline_unknown_pos()?;
        }
    }
    self.result.write_str(")")?;
    Ok(())
}
```

--------------------------------

### Config::print method

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.Config.html?search=

Print a WebAssembly binary. This function takes an entire `wasm` binary blob and prints it to the `result` in the WebAssembly Text Format.

```rust
pub fn print(&self, wasm: &[u8], result: &mut impl Print) -> Result<()>
```

--------------------------------

### Print Component Type Declarations

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=std%3A%3Avec

Prints a component type by pushing a new state, starting a 'component' group, and iterating over declarations. Handles core type, type, alias, and export declarations.

```rust
pub(crate) fn print_component_type<'a>(
    &mut self,
    states: &mut Vec<State>,
    decls: Vec<ComponentTypeDeclaration<'a>>,
) -> Result<()> {
    states.push(State::new(Encoding::Component));
    self.newline_unknown_pos()?;
    self.start_group("component")?;
    for decl in decls {
        self.newline_unknown_pos()?;
        match decl {
            ComponentTypeDeclaration::CoreType(ty) => self.print_core_type(states, ty)?,
            ComponentTypeDeclaration::Type(ty) => self.print_component_type_def(states, ty)?,
            ComponentTypeDeclaration::Alias(alias) => {
                self.print_component_alias(states, alias)?;
            }
            ComponentTypeDeclaration::Export { name, ty } => {
                self.start_group("export ")?;
                self.print_component_kind_name(states.last_mut().unwrap(), ty.kind())?;
                self.result.write_str(" ")?;
                self.print_component_extern_name(&name)?;
            }
        }
    }
    self.end_group()?;
    states.pop();
    Ok(())
}
```

--------------------------------

### Print Module Type Declarations

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=std%3A%3Avec

Prints a module type by pushing a new state, starting a 'module' group, and iterating over declarations. Handles type, outer alias, export, and import declarations.

```rust
pub(crate) fn print_module_type(
    &mut self,
    states: &mut Vec<State>,
    decls: Vec<ModuleTypeDeclaration>,
) -> Result<()> {
    states.push(State::new(Encoding::Module));
    self.newline_unknown_pos()?;
    self.start_group("module")?;
    for decl in decls {
        self.newline_unknown_pos()?;
        match decl {
            ModuleTypeDeclaration::Type(rec) => {
                self.print_rec(states.last_mut().unwrap(), None, rec, false)?
            }
            ModuleTypeDeclaration::OuterAlias { kind, count, index } => {
                self.print_outer_alias(states, kind, count, index)?;
            }
            ModuleTypeDeclaration::Export { name, ty } => {
                self.start_group("export ")?;
                self.print_str(name)?;
                self.result.write_str(" ")?;
                self.print_import_ty(states.last_mut().unwrap(), &ty, false)?;
                self.end_group()?;
            }
            ModuleTypeDeclaration::Import(import) => {
                self.print_import(states.last_mut().unwrap(), &import, false)?;
            }
        }
    }
    self.end_group()?;
    states.pop();
    Ok(())
}
```

--------------------------------

### Print component type reference

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/component.rs.html?search=std%3A%3Avec

Prints a component type reference by starting a group labeled "type ", printing the index using the component type names, and ending the group.

```rust
    pub(crate) fn print_component_type_ref(&mut self, state: &State, idx: u32) -> Result<()> {
        self.start_group("type ")?;
        self.print_idx(&state.component.type_names, idx)?;
        self.end_group()?;
        Ok(())
    }
```

--------------------------------

### PrintFmtWrite::start_type

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintFmtWrite.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Sets the colors settings for a type ((param i32)) to be printed.

```APIDOC
## [METHOD] [ENDPOINT]

### Description
Sets the colors settings for a type (`(param i32)`) to be printed.

### Method
N/A

### Endpoint
N/A

### Parameters
None

### Request Example
N/A

### Response
#### Success Response (200)
- **result** (Result) - The result of the color setting operation.

#### Response Example
N/A
```

--------------------------------

### Macros for StructGet, StructGetS, StructGetU, and StructSet payload printing

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/operator.rs.html?search=std%3A%3Avec

Print the struct type index and field index for struct get and set operations. All four macros share the same printing logic.

```rust
(payload $self:ident StructGet $ty:ident $field:ident) => (
    $self.struct_type_index($ty)?;
    $self.push_str(" ")?;
    $self.printer.print_field_idx($self.state, $ty, $field)?;
);
```

```rust
(payload $self:ident StructGetS $ty:ident $field:ident) => (
    $self.struct_type_index($ty)?;
    $self.push_str(" ")?;
    $self.printer.print_field_idx($self.state, $ty, $field)?;
);
```

```rust
(payload $self:ident StructGetU $ty:ident $field:ident) => (
    $self.struct_type_index($ty)?;
    $self.push_str(" ")?;
    $self.printer.print_field_idx($self.state, $ty, $field)?;
);
```

```rust
(payload $self:ident StructSet $ty:ident $field:ident) => (
    $self.struct_type_index($ty)?;
    $self.push_str(" ")?;
    $self.printer.print_field_idx($self.state, $ty, $field)?;
);
```

--------------------------------

### PrintTermcolor::start_keyword

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintTermcolor.html?search=std%3A%3Avec

Sets the colors settings for a keyword (`(module ...)`) to be printed.

```APIDOC
## start_keyword

### Description
Sets the colors settings for a keyword (`(module ...)`) to be printed.

### Method
`fn start_keyword(&mut self) -> Result<()>`

### Parameters
None.

### Returns
- `Result<()>` - Ok(()) on success, or an error.
```

--------------------------------

### PrintIoWrite::start_type

Source: https://docs.rs/wasmprinter/latest/wasmprinter/struct.PrintIoWrite.html?search=

Sets the colors settings for a type (`(param i32)`) to be printed.

```APIDOC
## start_type

### Description
Sets the colors settings for a type (`(param i32)`) to be printed.

### Method
`fn start_type(&mut self) -> Result<()>`

### Returns
- `Result<()>` - Ok if successful, or an error.
```

--------------------------------

### end_group_at_pos helper function

Source: https://docs.rs/wasmprinter/latest/src/wasmprinter/lib.rs.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Closes a group at a specific offset. If `print_offsets` is enabled, it always adds a newline at the offset; otherwise, it adds a newline only if the group started on a different line. Then writes a closing parenthesis.

```rust
    fn end_group_at_pos(&mut self, offset: u64) -> Result<()> {
        self.nesting -= 1;
        let start_group_line = self.group_lines.pop();
        if self.config.print_offsets {
            self.newline(offset)?;
        } else if let Some(line) = start_group_line {
            if line != self.line {
                self.newline(offset)?;
            }
        }
        self.result.write_str(")")?;
        Ok(())
    }
```