ravedude

https://docs.rs/ravedude/0.2.2/ravedude
Admin
ravedude is a CLI utility and wrapper around avrdude that makes Rust development for AVR...
Tokens:1,090
Snippets:11
Trust Score:9.1
Update:5 months ago
Show doc for...
Tokens:
Raw
### Install Ravedude CLI

Source: https://docs.rs/ravedude

Install the latest version of ravedude from crates.io using cargo.

```bash
cargo +stable install --locked ravedude
```

--------------------------------

### Advanced Ravedude Configuration Options

Source: https://docs.rs/ravedude

Example of advanced Ravedude.toml configuration, including manual port specification, console port, output modes, and reset delays.

```toml
[general]
# if auto-detection is not working, you can hard-code a specific port here
# (the port can also be passed via the RAVEDUDE_PORT environment variable)
port = "/dev/ttyACM0"

# ravedude should open a serial console after flashing
open-console = true

# you can optionally specify a separate port for the console
# (can also be set with `--console-port` or RAVEDUDE_CONSOLE_PORT environment variable)
# console-port = "/dev/ttyACM1"

# console output mode. Can be ascii, hex, dec or bin
output-mode = "ascii"

# Print a newline after this byte
# not used with output_mode ascii
# hex (0x) and bin (0b) notations are supported.
# matching chars/bytes are NOT removed
# to add newlines after \n (in non-ascii mode), use \n, 0x0a or 0b00001010
# newline-on = '\n'

# Print a newline after n bytes
# not used with output_mode ascii
# defaults to 16 for hex and dec and 8 for bin
# if dividable by 4, bytes will be grouped to 4
# newline-after = 16

# baudrate for the serial console (this is **not** the avrdude flashing baudrate)
serial-baudrate = 57600

# time to wait for the board to be reset (in milliseconds).  this skips the manual prompt for resetting the board.
reset-delay = 2000
```

--------------------------------

### Custom Board Configuration in Ravedude.toml

Source: https://docs.rs/ravedude

Example configuration for a custom AVR board in Ravedude.toml, specifying general settings, board details, reset behavior, and avrdude parameters.

```toml
[general]
# port = ...
# open-console = true
# serial-baudrate = 57600

[board]
name = "Custom Arduino Uno"

[board.reset]
# The board automatically resets when attempting to flash
automatic = true

[board.avrdude]
# avrdude configuration
programmer = "arduino"
partno = "atmega328p"
baudrate = -1
do-chip-erase = true
```

--------------------------------

### Basic Ravedude Configuration

Source: https://docs.rs/ravedude

A minimal Ravedude.toml configuration for an off-the-shelf AVR board, specifying the board type and enabling the serial console.

```toml
[general]
board = "uno"

# ravedude should open a serial console after flashing
open-console = true
serial-baudrate = 57600
```

--------------------------------

### Configure Ravedude Runner in .cargo/config.toml

Source: https://docs.rs/ravedude

Configure ravedude as the runner for AVR targets in your project's .cargo/config.toml file. This enables using 'cargo run' for building and deploying.

```toml
[target.'cfg(target_arch = "avr")']
runner = "ravedude"
```
Tokens:
Raw