### Initializing DhcpConfig

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpConfig.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Example showing how to instantiate a DhcpConfig and use it to initialize a DhcpServer.

```rust
use core::net::Ipv4Addr;
use leasehund::{DhcpConfig, DhcpServer};

let mut dns_servers = heapless::Vec::<Ipv4Addr, 4>::new();
dns_servers.push(Ipv4Addr::new(8, 8, 8, 8)).ok();
dns_servers.push(Ipv4Addr::new(8, 8, 4, 4)).ok();

let config: DhcpConfig<4> = DhcpConfig {
    server_ip: Ipv4Addr::new(192, 168, 1, 1),
    subnet_mask: Ipv4Addr::new(255, 255, 255, 0),
    router: Some(Ipv4Addr::new(192, 168, 1, 1)),
    dns_servers,
    ip_pool_start: Ipv4Addr::new(192, 168, 1, 100),
    ip_pool_end: Ipv4Addr::new(192, 168, 1, 200),
    lease_time: 3600,
};

let server: DhcpServer<32, 4> = DhcpServer::with_config(config);
```

--------------------------------

### Initialize and run a basic DHCP server

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=u32+-%3E+bool

Instantiate a DhcpServer with required network parameters and start the server loop.

```rust
use core::net::Ipv4Addr;
use leasehund::DhcpServer;
use embassy_net::Stack;

let mut server = DhcpServer::<32, 4>::new(
    Ipv4Addr::new(192, 168, 1, 1),    // Server IP
    Ipv4Addr::new(255, 255, 255, 0),  // Subnet mask
    Ipv4Addr::new(192, 168, 1, 1),    // Router/Gateway
    Ipv4Addr::new(8, 8, 8, 8),        // DNS server
    Ipv4Addr::new(192, 168, 1, 100),  // IP pool start
    Ipv4Addr::new(192, 168, 1, 200),  // IP pool end
);

// Run the DHCP server (this will loop forever)
server.run(stack).await;
```

--------------------------------

### DhcpServer::run

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Starts the DHCP server loop.

```APIDOC
## DhcpServer::run

### Description
Starts the DHCP server, which listens for requests and manages leases. This method runs indefinitely and requires an Embassy network stack.

### Signature
`server.run(stack).await`
```

--------------------------------

### pub async fn run(&mut self, stack: Stack<'_>) -> !

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=std%3A%3Avec

Starts the DHCP server on the provided network stack. This method runs indefinitely and will panic if the UDP socket fails to bind to port 67.

```APIDOC
## pub async fn run(&mut self, stack: Stack<'_>) -> !

### Description
Runs the DHCP server forever on the provided network stack.

### Parameters
- **stack** (Stack<'_>) - Required - The network stack to bind the DHCP server to.

### Panics
Panics if the UDP socket cannot bind to port 67.
```

--------------------------------

### pub async fn run_with_callback<F>(&mut self, stack: Stack<'_>, callback: F) -> !

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=u32+-%3E+bool

Starts the DHCP server and invokes a provided callback function for every transaction event, such as lease assignments or releases.

```APIDOC
## pub async fn run_with_callback<F>(&mut self, stack: Stack<'_>, callback: F) -> !

### Description
Runs the DHCP server forever, invoking `callback` for every lease event. This is identical to `run` except that `TransactionEvent`s are forwarded to the caller via `callback` instead of being discarded.

### Parameters
- **stack** (Stack<'_>) - Required - The network stack instance to bind the DHCP server to.
- **callback** (F) - Required - A closure that implements `FnMut(TransactionEvent)` to handle lease events.
```

--------------------------------

### pub async fn run_with_callback<F>(&mut self, stack: Stack<'_>, callback: F) -> !

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=std%3A%3Avec

Starts the DHCP server and invokes a provided callback function for every transaction event, such as lease assignments or releases.

```APIDOC
## pub async fn run_with_callback<F>(&mut self, stack: Stack<'_>, callback: F) -> !

### Description
Runs the DHCP server forever, invoking `callback` for every lease event. This is identical to `run` except that `TransactionEvent`s are forwarded to the caller via `callback` instead of being discarded.

### Parameters
- **stack** (Stack<'_>) - Required - The network stack to bind the DHCP server to.
- **callback** (F) - Required - A closure that implements `FnMut(TransactionEvent)` to handle lease events.
```

--------------------------------

### DhcpServer::run

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=std%3A%3Avec

Starts the DHCP server loop to process incoming network requests.

```APIDOC
## DhcpServer::run

### Description
Runs the DHCP server, listening for and responding to DHCP requests. This method is asynchronous and typically runs in a loop.

### Signature
`server.run(stack).await`

### Parameters
- **stack** (embassy_net::Stack) - Required - The Embassy network stack instance.
```

--------------------------------

### DhcpServer::run

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=

Starts the DHCP server loop to process incoming network requests.

```APIDOC
## DhcpServer::run

### Description
Runs the DHCP server, listening for and responding to DHCP messages. This method loops indefinitely.

### Parameters
- **stack** (Stack) - Required - The Embassy network stack instance.
```

--------------------------------

### pub async fn run(&mut self, stack: Stack<'_>) -> !

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=u32+-%3E+bool

Starts the DHCP server on the provided network stack and runs it indefinitely. This method will panic if the underlying UDP socket fails to bind to port 67.

```APIDOC
## pub async fn run(&mut self, stack: Stack<'_>) -> !

### Description
Runs the DHCP server forever on the provided network stack.

### Parameters
- **stack** (Stack<'_>) - Required - The network stack instance to bind the DHCP server to.

### Panics
Panics if the UDP socket cannot bind to port 67.
```

--------------------------------

### Initialize DhcpServer

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=std%3A%3Avec

Demonstrates creating a new DhcpServer instance using direct parameters or the DhcpConfigBuilder for advanced configuration.

```rust
use core::net::Ipv4Addr;
use leasehund::DhcpServer;

let server = DhcpServer::<32, 4>::new(
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(255, 255, 255, 0),
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(8, 8, 8, 8),
    Ipv4Addr::new(192, 168, 1, 100),
    Ipv4Addr::new(192, 168, 1, 200),
);
```

```rust
use core::net::Ipv4Addr;
use leasehund::{DhcpServer, DhcpConfigBuilder};

let config = DhcpConfigBuilder::<4>::new()
    .server_ip(Ipv4Addr::new(10, 0, 1, 1))
    .subnet_mask(Ipv4Addr::new(255, 255, 0, 0))
    .router(Ipv4Addr::new(10, 0, 1, 1))
    .add_dns_server(Ipv4Addr::new(1, 1, 1, 1))
    .add_dns_server(Ipv4Addr::new(1, 0, 0, 1))
    .ip_pool(Ipv4Addr::new(10, 0, 100, 1), Ipv4Addr::new(10, 0, 199, 254))
    .lease_time(7200)
    .build();

let server: DhcpServer<32, 4> = DhcpServer::with_config(config);
```

--------------------------------

### DhcpServer::new

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=std%3A%3Avec

Initializes a new DHCP server instance with basic configuration parameters.

```APIDOC
## DhcpServer::new

### Description
Creates a new DHCP server instance using the provided network configuration parameters.

### Signature
`DhcpServer::<MAX_CLIENTS, MAX_DNS>::new(server_ip, subnet_mask, router, dns_server, pool_start, pool_end)`

### Parameters
- **server_ip** (Ipv4Addr) - Required - The IP address of the DHCP server.
- **subnet_mask** (Ipv4Addr) - Required - The subnet mask for the network.
- **router** (Ipv4Addr) - Required - The gateway/router IP address.
- **dns_server** (Ipv4Addr) - Required - The primary DNS server IP.
- **pool_start** (Ipv4Addr) - Required - The start of the IP address pool.
- **pool_end** (Ipv4Addr) - Required - The end of the IP address pool.
```

--------------------------------

### Initialize DhcpServer with new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Creates a new DHCP server instance using direct parameters for network configuration.

```rust
use core::net::Ipv4Addr;
use leasehund::DhcpServer;

let server = DhcpServer::<32, 4>::new(
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(255, 255, 255, 0),
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(8, 8, 8, 8),
    Ipv4Addr::new(192, 168, 1, 100),
    Ipv4Addr::new(192, 168, 1, 200),
);
```

--------------------------------

### Configure DHCP server with DhcpConfigBuilder

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=u32+-%3E+bool

Use the builder pattern to define advanced server settings before initializing the DhcpServer.

```rust
use core::net::Ipv4Addr;
use leasehund::{DhcpServer, DhcpConfigBuilder};
use embassy_net::Stack;

let config = DhcpConfigBuilder::<4>::new()
    .server_ip(Ipv4Addr::new(10, 0, 1, 1))
    .subnet_mask(Ipv4Addr::new(255, 255, 0, 0))
    .router(Ipv4Addr::new(10, 0, 1, 1))
    .add_dns_server(Ipv4Addr::new(1, 1, 1, 1))
    .add_dns_server(Ipv4Addr::new(1, 0, 0, 1))
    .add_dns_server(Ipv4Addr::new(8, 8, 8, 8))
    .ip_pool(
        Ipv4Addr::new(10, 0, 100, 1),
        Ipv4Addr::new(10, 0, 199, 254)
    )
    .lease_time(7200)
    .build();

let mut server: DhcpServer<32, 4> = DhcpServer::with_config(config);
server.run(stack).await;
```

--------------------------------

### pub async fn run_with_callback<F>(&mut self, stack: Stack<'_>, callback: F) -> !

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Runs the DHCP server indefinitely, invoking a provided callback function for every TransactionEvent that occurs.

```APIDOC
## run_with_callback

### Description
Runs the DHCP server forever, invoking `callback` for every lease event. This is identical to `run` except that `TransactionEvent`s are forwarded to the caller via `callback` instead of being discarded.

### Parameters
- **stack** (Stack<'_>) - Required - The network stack to run the DHCP server on.
- **callback** (F) - Required - A closure that implements FnMut(TransactionEvent) to handle lease events.
```

--------------------------------

### Initialize DHCPServerBuffers

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerBuffers.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Create a new instance of the DHCP server buffers using the new constructor.

```rust
use leasehund::DHCPServerBuffers;
let buffers = DHCPServerBuffers::new();
```

--------------------------------

### DhcpServer::new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=std%3A%3Avec

Creates a new DHCP server instance with a single DNS server configuration.

```APIDOC
## DhcpServer::new

### Description
Creates a new DHCP server with a single DNS server. For multiple DNS servers or advanced options, use `DhcpConfigBuilder` with `with_config`.

### Signature
`pub fn new(server_ip: Ipv4Addr, subnet_mask: Ipv4Addr, router: Ipv4Addr, dns_server: Ipv4Addr, ip_pool_start: Ipv4Addr, ip_pool_end: Ipv4Addr) -> Self`
```

--------------------------------

### DhcpServer::new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Creates a new DHCP server instance with a single DNS server configuration.

```APIDOC
## pub fn new(server_ip: Ipv4Addr, subnet_mask: Ipv4Addr, router: Ipv4Addr, dns_server: Ipv4Addr, ip_pool_start: Ipv4Addr, ip_pool_end: Ipv4Addr) -> Self

### Description
Creates a new DHCP server with a single DNS server. For multiple DNS servers or advanced options, use `DhcpConfigBuilder` with `with_config`.
```

--------------------------------

### pub async fn run(&mut self, stack: Stack<'_>) -> !

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Runs the DHCP server indefinitely on the provided network stack. This method will panic if the underlying UDP socket fails to bind to port 67.

```APIDOC
## run

### Description
Runs the DHCP server forever on the provided network stack.

### Parameters
- **stack** (Stack<'_>) - Required - The network stack to run the DHCP server on.

### Panics
Panics if the UDP socket cannot bind to port 67.
```

--------------------------------

### DHCPServerBuffers::new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerBuffers.html?search=

Creates a new instance of DHCPServerBuffers.

```APIDOC
## pub const fn new() -> Self

### Description
Creates a new set of DHCP server buffers.

### Signature
`pub const fn new() -> Self`

### Example
```rust
use leasehund::DHCPServerBuffers;
let buffers = DHCPServerBuffers::new();
```
```

--------------------------------

### DhcpServer::with_config

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=std%3A%3Avec

Creates a new DHCP server instance using a pre-configured DhcpConfig object.

```APIDOC
## DhcpServer::with_config

### Description
Creates a new DHCP server from a `DhcpConfig`.

### Signature
`pub const fn with_config(config: DhcpConfig<MAX_DNS>) -> Self`
```

--------------------------------

### Run DHCP Server with Callback

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Executes the DHCP server while forwarding TransactionEvents to a provided callback function for monitoring lease activity.

```rust
use embassy_net::Stack;
use leasehund::{DhcpServer, TransactionEvent};
use core::net::Ipv4Addr;

let mut server = DhcpServer::<32, 4>::new(
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(255, 255, 255, 0),
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(8, 8, 8, 8),
    Ipv4Addr::new(192, 168, 1, 100),
    Ipv4Addr::new(192, 168, 1, 200),
);

server.run_with_callback(stack, |event| {
    match event {
        TransactionEvent::Leased(ip, mac) => {
            // log or react to new lease
        }
        TransactionEvent::Released(ip, mac) => {
            // log or react to release
        }
    }
}).await;
```

--------------------------------

### Find next available IP address

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Demonstrates how to retrieve the next available IP address from the server's configured pool.

```rust
use core::net::Ipv4Addr;
use leasehund::{DhcpConfig, DhcpServer};

let mut dns_servers = heapless::Vec::<Ipv4Addr, 4>::new();
dns_servers.push(Ipv4Addr::new(1, 1, 1, 1)).ok();
let config: DhcpConfig<4> = DhcpConfig {
    server_ip: Ipv4Addr::new(10, 0, 0, 1),
    subnet_mask: Ipv4Addr::new(255, 255, 255, 0),
    router: Some(Ipv4Addr::new(10, 0, 0, 1)),
    dns_servers,
    ip_pool_start: Ipv4Addr::new(10, 0, 0, 100),
    ip_pool_end: Ipv4Addr::new(10, 0, 0, 102),
    lease_time: 3600,
};
let server: DhcpServer<32, 4> = DhcpServer::with_config(config);
let next = server.get_next_available_ip();
assert!(matches!(next, Some(ip) if ip == Ipv4Addr::new(10, 0, 0, 100)));
```

--------------------------------

### Initialize DHCPServerSocket

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerSocket.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Creates a new DHCP server UDP socket bound to port 67. Panics if the socket binding fails.

```rust
use leasehund::{DHCPServerSocket, DHCPServerBuffers};
let mut buffers = DHCPServerBuffers::new();
let socket = DHCPServerSocket::new(stack, &mut buffers);
```

--------------------------------

### Perform manual transaction handling

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=u32+-%3E+bool

Use the lease_one method for manual control over DHCP transaction events.

```rust
use core::net::Ipv4Addr;
use leasehund::{DhcpServer, DHCPServerSocket, DHCPServerBuffers, TransactionEvent, DhcpConfigBuilder};

let config = DhcpConfigBuilder::<4>::new()
    .server_ip(Ipv4Addr::new(10, 0, 1, 1))
    .subnet_mask(Ipv4Addr::new(255, 255, 0, 0))
    .router(Ipv4Addr::new(10, 0, 1, 1))
    .add_dns_server(Ipv4Addr::new(1, 1, 1, 1))
    .add_dns_server(Ipv4Addr::new(1, 0, 0, 1))
    .add_dns_server(Ipv4Addr::new(8, 8, 8, 8))
    .ip_pool(
        Ipv4Addr::new(10, 0, 100, 1),
        Ipv4Addr::new(10, 0, 199, 254)
    )
    .lease_time(7200)
    .build();
let mut server = DhcpServer::<32, 4>::with_config(config);
let mut buffers = DHCPServerBuffers::new();
let mut socket = DHCPServerSocket::new(stack, &mut buffers);
let _event: Result<TransactionEvent, _> = server.lease_one(&mut socket).await;
```

--------------------------------

### Initialize TransactionEvent

Source: https://docs.rs/leasehund/latest/leasehund/enum.TransactionEvent.html

Create a new TransactionEvent instance representing a lease event.

```rust
use leasehund::TransactionEvent;
use core::net::Ipv4Addr;
let event = TransactionEvent::Leased(Ipv4Addr::new(192, 168, 1, 100), [0x00, 0x11, 0x22, 0x33, 0x44, 0x55]);
```

--------------------------------

### DhcpServer Utility Methods

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html

Methods for managing the server state, including lease counts, pool status, and IP allocation.

```APIDOC
## Utility Methods

- `config(&self) -> &DhcpConfig<MAX_DNS>`: Gets a reference to the current configuration.
- `lease_count(&self) -> usize`: Gets the current number of active leases.
- `purge_expired_leases(&mut self)`: Removes all expired leases from the lease table.
- `is_pool_full(&self) -> bool`: Checks if the IP pool is full.
- `get_next_available_ip(&self) -> Option<Ipv4Addr>`: Finds the next available IP address in the configured pool.
```

--------------------------------

### DhcpConfigBuilder

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=

A fluent builder API for configuring the DHCP server with advanced settings.

```APIDOC
## DhcpConfigBuilder

### Description
Provides a fluent interface to configure the DHCP server settings before instantiation.

### Methods
- **server_ip(Ipv4Addr)** - Sets the server IP.
- **subnet_mask(Ipv4Addr)** - Sets the subnet mask.
- **router(Ipv4Addr)** - Sets the router/gateway IP.
- **add_dns_server(Ipv4Addr)** - Adds a DNS server to the configuration.
- **ip_pool(Ipv4Addr, Ipv4Addr)** - Sets the start and end range for the IP pool.
- **lease_time(u32)** - Sets the lease duration in seconds.
- **build()** - Returns the final configuration object.
```

--------------------------------

### DHCPServerBuffers::new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerBuffers.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Creates a new instance of DHCPServerBuffers, initializing the pre-allocated UDP socket buffers and metadata.

```APIDOC
## pub const fn new() -> Self

### Description
Creates a new set of DHCP server buffers for use by the DHCP server.

### Signature
`pub const fn new() -> Self`

### Example
```rust
use leasehund::DHCPServerBuffers;
let buffers = DHCPServerBuffers::new();
```
```

--------------------------------

### DhcpConfigBuilder

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=std%3A%3Avec

A fluent builder API for configuring the DHCP server with advanced options.

```APIDOC
## DhcpConfigBuilder

### Description
Provides a builder pattern to configure the DHCP server settings before initialization.

### Methods
- **server_ip(Ipv4Addr)**: Sets the server IP.
- **subnet_mask(Ipv4Addr)**: Sets the subnet mask.
- **router(Ipv4Addr)**: Sets the gateway IP.
- **add_dns_server(Ipv4Addr)**: Adds a DNS server to the configuration.
- **ip_pool(Ipv4Addr, Ipv4Addr)**: Sets the start and end of the IP address pool.
- **lease_time(u32)**: Sets the lease duration in seconds.
- **build()**: Consumes the builder and returns a configuration object.
```

--------------------------------

### DhcpConfigBuilder

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Fluent API for advanced DHCP server configuration.

```APIDOC
## DhcpConfigBuilder

### Description
Provides a builder pattern to construct complex DHCP configurations before initializing the server.

### Methods
- `.server_ip(Ipv4Addr)`: Sets the server IP.
- `.subnet_mask(Ipv4Addr)`: Sets the subnet mask.
- `.router(Ipv4Addr)`: Sets the gateway IP.
- `.add_dns_server(Ipv4Addr)`: Adds a DNS server to the configuration.
- `.ip_pool(start, end)`: Defines the range of assignable IP addresses.
- `.lease_time(u32)`: Sets the lease duration in seconds.
- `.build()`: Consumes the builder and returns a configuration object.
```

--------------------------------

### DHCPServerSocket::new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerSocket.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Creates a new instance of DHCPServerSocket bound to port 67.

```APIDOC
## pub fn new(stack: Stack<'a>, buffers: &'a mut DHCPServerBuffers) -> Self

### Description
Creates a new DHCP server UDP socket bound to port 67. This method initializes the socket using the provided network stack and buffers.

### Parameters
- **stack** (Stack<'a>) - Required - The network stack to use for the socket.
- **buffers** (&'a mut DHCPServerBuffers) - Required - Mutable reference to the buffers required by the DHCP server.

### Panics
Panics if the socket binding to port 67 fails.

### Example
```rust
use leasehund::{DHCPServerSocket, DHCPServerBuffers};
let mut buffers = DHCPServerBuffers::new();
let socket = DHCPServerSocket::new(stack, &mut buffers);
```
```

--------------------------------

### Run DHCP Server

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Executes the DHCP server indefinitely on the provided network stack. Panics if the UDP socket fails to bind to port 67.

```rust
use embassy_net::Stack;
use leasehund::DhcpServer;
use core::net::Ipv4Addr;

let mut server = DhcpServer::<32, 4>::new(
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(255, 255, 255, 0),
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(8, 8, 8, 8),
    Ipv4Addr::new(192, 168, 1, 100),
    Ipv4Addr::new(192, 168, 1, 200),
);

server.run(stack).await;
```

--------------------------------

### DhcpServer::lease_one

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Manually handles a single DHCP transaction event.

```APIDOC
## DhcpServer::lease_one

### Description
Processes a single DHCP transaction event using the provided socket and buffers. Useful for manual control over the server's event loop.

### Signature
`server.lease_one(&mut socket).await`
```

--------------------------------

### DhcpServer::lease_one

Source: https://docs.rs/leasehund/latest/leasehund/index.html?search=

Manually handles a single DHCP transaction event.

```APIDOC
## DhcpServer::lease_one

### Description
Processes a single DHCP transaction event using the provided socket.

### Parameters
- **socket** (DHCPServerSocket) - Required - The socket used for communication.
```

--------------------------------

### DhcpConfigBuilder API

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpConfigBuilder.html

Methods available for configuring and building a DHCP server configuration.

```APIDOC
## DhcpConfigBuilder

### new()
Creates a new configuration builder with default settings and no DNS servers.

### server_ip(ip: Ipv4Addr)
Sets the DHCP server IP address.

### subnet_mask(mask: Ipv4Addr)
Sets the subnet mask.

### router(router: Ipv4Addr)
Sets the default gateway/router IP address.

### no_router()
Removes the router option.

### add_dns_server(dns: Ipv4Addr)
Adds a DNS server to the configuration. If the maximum number of DNS servers is reached, the server is dropped.

### clear_dns_servers()
Clears all configured DNS servers.

### ip_pool(start: Ipv4Addr, end: Ipv4Addr)
Sets the IP address pool range.

### lease_time(seconds: u32)
Sets the lease time in seconds.

### build()
Builds and returns the final DhcpConfig object.
```

--------------------------------

### Define DHCPServerBuffers struct

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerBuffers.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

The internal structure definition for DHCPServerBuffers.

```rust
pub struct DHCPServerBuffers { /* private fields */ }
```

--------------------------------

### DHCPServerSocket::new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerSocket.html

Creates a new DHCP server UDP socket bound to port 67. Panics if the socket binding fails.

```APIDOC
## pub fn new(stack: Stack<'a>, buffers: &'a mut DHCPServerBuffers) -> Self

### Description
Creates a new DHCP server UDP socket bound to port 67. This method initializes the socket using the provided network stack and buffers.

### Parameters
- **stack** (Stack<'a>) - Required - The network stack to use for the socket.
- **buffers** (&'a mut DHCPServerBuffers) - Required - The buffers required for the DHCP server socket operations.

### Panics
Panics if the socket binding fails.

### Example
```rust
use leasehund::{DHCPServerSocket, DHCPServerBuffers};
let mut buffers = DHCPServerBuffers::new();
let socket = DHCPServerSocket::new(stack, &mut buffers);
```
```

--------------------------------

### DHCPServerSocket::new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerSocket.html?search=

Creates a new DHCP server UDP socket bound to port 67. Panics if the socket binding fails.

```APIDOC
## pub fn new(stack: Stack<'a>, buffers: &'a mut DHCPServerBuffers) -> Self

### Description
Creates a new DHCP server UDP socket bound to port 67. This is the primary constructor for initializing the socket.

### Parameters
- **stack** (Stack<'a>) - Required - The network stack to use for the socket.
- **buffers** (&'a mut DHCPServerBuffers) - Required - Mutable reference to the buffers required for DHCP server operations.

### Panics
Panics if the socket binding fails.

### Example
```rust
use leasehund::{DHCPServerSocket, DHCPServerBuffers};
let mut buffers = DHCPServerBuffers::new();
let socket = DHCPServerSocket::new(stack, &mut buffers);
```
```

--------------------------------

### DhcpServer::lease_one

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Processes DHCP packets asynchronously to handle a single lease or release transaction.

```APIDOC
## pub async fn lease_one(&mut self, socket: &mut DHCPServerSocket<'_>) -> Result<TransactionEvent, RecvError>

### Description
Processes packets until a single lease or release transaction completes. Returns `RecvError` if there was an error receiving a packet.
```

--------------------------------

### Define DhcpConfigBuilder struct

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpConfigBuilder.html?search=

The definition of the DhcpConfigBuilder struct with a configurable maximum number of DNS servers.

```rust
pub struct DhcpConfigBuilder<const MAX_DNS: usize = DEFAULT_MAX_DNS_SERVERS> { /* private fields */ }
```

--------------------------------

### DhcpServer::lease_one

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=u32+-%3E+bool

Processes network packets to complete a single DHCP lease or release transaction.

```APIDOC
## pub async fn lease_one(&mut self, socket: &mut DHCPServerSocket<'_>) -> Result<TransactionEvent, RecvError>

### Description
Processes packets until a single lease or release transaction completes.
```

--------------------------------

### Process DHCP transactions

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Uses lease_one to process network packets for a single lease or release transaction.

```rust
use leasehund::{DhcpServer, DHCPServerBuffers, DHCPServerSocket, TransactionEvent};
use core::net::Ipv4Addr;

let mut server = DhcpServer::<32, 4>::new(
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(255, 255, 255, 0),
    Ipv4Addr::new(192, 168, 1, 1),
    Ipv4Addr::new(8, 8, 8, 8),
    Ipv4Addr::new(192, 168, 1, 100),
    Ipv4Addr::new(192, 168, 1, 200),
);
let mut buffers = DHCPServerBuffers::new();
let mut socket = DHCPServerSocket::new(stack, &mut buffers);
let _event: Result<TransactionEvent, _> = server.lease_one(&mut socket).await;
```

--------------------------------

### DhcpServer::get_next_available_ip

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=

Retrieves the next available IP address from the configured pool.

```APIDOC
## pub fn get_next_available_ip(&self) -> Option<Ipv4Addr>

### Description
Searches the configured IP pool and returns the next available `Ipv4Addr` if one exists.
```

--------------------------------

### Define DHCPServerSocket

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerSocket.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

The struct definition for DHCPServerSocket.

```rust
pub struct DHCPServerSocket<'a> { /* private fields */ }
```

--------------------------------

### DHCPServerSocket::new

Source: https://docs.rs/leasehund/latest/leasehund/struct.DHCPServerSocket.html?search=std%3A%3Avec

Creates a new DHCP server UDP socket bound to port 67. This method will panic if the socket binding fails.

```APIDOC
## pub fn new(stack: Stack<'a>, buffers: &'a mut DHCPServerBuffers) -> Self

### Description
Creates a new DHCP server UDP socket bound to port 67. 

### Parameters
- **stack** (Stack<'a>) - Required - The network stack to use for the socket.
- **buffers** (&'a mut DHCPServerBuffers) - Required - Mutable reference to the buffers required for the DHCP server socket.

### Panics
Panics if the socket binding fails.

### Example
```rust
use leasehund::{DHCPServerSocket, DHCPServerBuffers};
let mut buffers = DHCPServerBuffers::new();
let socket = DHCPServerSocket::new(stack, &mut buffers);
```
```

--------------------------------

### DhcpConfig Struct Definition

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpConfig.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

The structure definition for DhcpConfig, utilizing a const generic for the maximum number of DNS servers.

```rust
pub struct DhcpConfig<const MAX_DNS: usize = DEFAULT_MAX_DNS_SERVERS> {
    pub server_ip: Ipv4Addr,
    pub subnet_mask: Ipv4Addr,
    pub router: Option<Ipv4Addr>,
    pub dns_servers: Vec<Ipv4Addr, MAX_DNS>,
    pub ip_pool_start: Ipv4Addr,
    pub ip_pool_end: Ipv4Addr,
    pub lease_time: u32,
}
```

--------------------------------

### DhcpServer::is_pool_full

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=u32+-%3E+bool

Checks if the configured IP address pool is currently full.

```APIDOC
## pub fn is_pool_full(&self) -> bool

### Description
Checks if the IP pool is full. Call `purge_expired_leases` first to reclaim expired entries if desired.
```

--------------------------------

### DhcpServer::lease_count

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=u32+-%3E+bool

Retrieves the current number of active leases managed by the server.

```APIDOC
## pub fn lease_count(&self) -> usize

### Description
Gets the current number of active leases.
```

--------------------------------

### DhcpServer::get_next_available_ip

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Finds the next available IP address within the configured IP pool.

```APIDOC
## pub fn get_next_available_ip(&self) -> Option<Ipv4Addr>

### Description
Finds the next available IP address in the configured pool.
```

--------------------------------

### DhcpServer::get_next_available_ip

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=std%3A%3Avec

Finds the next available IP address within the configured IP pool.

```APIDOC
## DhcpServer::get_next_available_ip

### Description
Finds the next available IP address in the configured pool.

### Signature
`pub fn get_next_available_ip(&self) -> Option<Ipv4Addr>`
```

--------------------------------

### DhcpServer::purge_expired_leases

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=Option%3CT%3E%2C+%28T+-%3E+U%29+-%3E+Option%3CU%3E

Removes all expired leases from the internal lease table.

```APIDOC
## pub fn purge_expired_leases(&mut self)

### Description
Removes all expired leases from the lease table.
```

--------------------------------

### DhcpServer::purge_expired_leases

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=std%3A%3Avec

Removes all expired leases from the internal lease table.

```APIDOC
## DhcpServer::purge_expired_leases

### Description
Removes all expired leases from the lease table.

### Signature
`pub fn purge_expired_leases(&mut self)`
```

--------------------------------

### DhcpServer::purge_expired_leases

Source: https://docs.rs/leasehund/latest/leasehund/struct.DhcpServer.html?search=

Removes all expired leases from the internal lease table.

```APIDOC
## pub fn purge_expired_leases(&mut self)

### Description
Clears the lease table by removing all entries that have expired.
```

--------------------------------

### Define RecvError Enum

Source: https://docs.rs/leasehund/latest/leasehund/enum.RecvError.html?search=

The structure of the RecvError enum, which currently contains a single variant for truncated packets.

```rust
pub enum RecvError {
    Truncated,
}
```

--------------------------------

### Define TransactionEvent Enum

Source: https://docs.rs/leasehund/latest/leasehund/enum.TransactionEvent.html

The structure of the TransactionEvent enum, containing variants for Leased and Released events.

```rust
pub enum TransactionEvent {
    Leased(Ipv4Addr, [u8; 6]),
    Released(Ipv4Addr, [u8; 6]),
}
```

=== COMPLETE CONTENT === This response contains all available snippets from this library. No additional content exists. Do not make further requests.