repmgr

https://www.repmgr.org/docs/current/
Admin
repmgr is a high-availability and replication management toolkit for PostgreSQL that enables...
Tokens:106,649
Snippets:810
Trust Score:9.1
Update:2 weeks ago
Show doc for...
Tokens:
Raw
### Configure and install repmgr from source

Source: https://www.repmgr.org/docs/current/repmgr.html

Builds and installs repmgr. Ensure pg_config for the target PostgreSQL version is in $PATH.

```bash
./configure && make install
```

--------------------------------

### repmgr node service --list-actions examples showing command syntax for each action stop start restart reload commands executed by system user usually postgres requiring passwordless sudo access For example using systemd on CentOS 1.9.6.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com.example.com. 

Source: https://www.repmgr.org/docs/current/repmgr.html

These commands display which command repmgr will execute for each action Useful for verifying configuration Must be run with appropriate permissions Usually requires passwordless sudo to execute service commands Example output not shown but command syntax provided Commands executed by system user usually postgres requiring passwordless sudo access For example using systemd on CentOS 1.9.6.example.com.example.com.example.com.example.com.example.com.example.com.example.com. 

```  
      repmgr -f /etc/repmgr.conf node service --list- 
      repmgr -f /etc/reignar.conf node service --list- 
      repmgr -f /etc/reignar.conf node service --list- 
      repmgr -f /etc/reignar.conf node service --list- 

```

--------------------------------

### repmgr witness register example

Source: https://www.repmgr.org/docs/current/repmgr.html

Registers a witness server with repmgr, providing the primary's hostname via -h. The output shows the connection, extension installation, and successful registration messages.

```bash
    $ repmgr -f /etc/repmgr.conf witness register -h node1
    INFO: connecting to witness node "node3" (ID: 3)
    INFO: connecting to primary node
    NOTICE: attempting to install extension "repmgr"
    NOTICE: "repmgr" extension successfully installed
    INFO: witness registration complete
    NOTICE: witness node "node3" (ID: 3) successfully registered
      
```

--------------------------------

### Install a specific version of repm10 using dnf install with version suffix. 

Source: https://www.repmgr.org/docs/current/repmgr.html

After listing available versions, append the exact version string to the package name with a root shell as shown. Ensure you have the correct version from the previous command; installing a version not listed will fail. 

```bash/sonsole with no output shown) 
[root@Thirdly, the above-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned-mentioned. code truncated for brevity) 
```

--------------------------------

### Install old repmgr versions on RHEL/CentOS with yum

Source: https://www.repmgr.org/docs/current/repmgr.html

Commands for locating and installing old repmgr package versions on RHEL/CentOS. The first lists available versions, the second shows the generic install syntax, and the third is a concrete example using repmgr96-4.0.6-1.rhel6.

```bash
yum --showduplicates list repmgr96
```

```bash
yum install {package_name}-{version}
```

```bash
yum install repmgr96-4.0.6-1.rhel6
```

--------------------------------

### Build PDF documentation with './configure && make doc-repmgr-A4.pdf'

Source: https://www.repmgr.org/docs/current/repmgr.html

After configuring and building the said main source execute this to generate a PDF file named 'doc-reinforcement-A4.pdf' in the source tree's root or specified output location unspecified in source; originates from section titled 'To build the documentation as a PDF file, after configuring and building the said main repmgr source as described above, execute:'; ensure prior steps are done first; failure to do so may lead to errors; henceforth treat accordingly. 

```bash or plaintext directive safest to use 'plaintext' quoting verbatim: './configure && make doc-reinforcement-A4.pdf'}], 
     ./configure && make doc-reinforcement-A4.pdf
```

--------------------------------

### Build documentation as a single HTML file with './configure && perform make doc-repmgr.exe

Source: https://www.repmgr.org/docs/current/repmgr.html

After configuring and building the main source as described above execute this to generate a single HTML file instead of multiple pages; useful for easier distribution or printing purposes; originates from section titled 'To build the previous example, execute:'; ensure prior steps are done first; failure to do so may lead to errors; henceforth treat accordingly. 

```plaintext or bash depending on interpretation; safest to use 'plaintext' as it's a directive-like string without actual shell syntax guarantee; henceforth quoting verbatim: './configure && make doc-repmgr. html'? Actually source says 'make doc-reinforcement. html'? Wait, provided input says: 'make doc-repmgr.      ,
     . /configure && make doc-repmgr. html
```

--------------------------------

### repmgrd service start/stop commands example

Source: https://www.repmgr.org/docs/current/repmgr.html

Example configuration for repmgr with PostgreSQL 12 on CentOS 7. Sets the commands used by 'repmgr daemon start' and 'repmgr daemon stop'.

```plaintext
repmgrd_service_start_command='sudo systemctl repmgr12 start'
repmgrd_service_stop_command='sudo systemctl repmgr12 stop'

```

--------------------------------

### Build HTML documentation with './configure && make doc'

Source: https://www.repmgr.org/docs/current/repmgr.html

Run from the source tree after installing dependencies; outputs HTML files to doc/html/works with Python-based tooling; applicable when needing browsable docs quickly, especially for versions prior to 4.iations requiring older PostgreSQL. Ensure prerequisites are met before executing; failure to do so may result in incomplete builds; consult README for specifics; this snippet originates from section titled 'Note: Building documentation as HTML' and preceding paragraphs mention needing to configure and make the main source beforehand, implying dependencies must be satisfied first; henceforth treat accordingly. 

```bash
    ./configure && make doc
```

--------------------------------

### Execute switch command standby switchover with output REPL REPLACED_REPLACED_Rejected_ REPLACED_Rejected_Repmard_Rejected_Repmard_ REPL REP REP REP REP REP REP REP REP REP REP REP REP REP REP description REPL REP REP REP REP REP REP language REPL REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP codeList: [ { 

Source: https://www.repmgr.org/docs/current/repmgr.html

Run this command from the standby node that should become the new primary switchover promotes that node to primary and demotes the original primary to standby. The output confirms each step, ending with 'STANDPARD SWITCHOVER is complete' and showing DETAIL lines with exact server commands used for stopping, promoting, and restarting. Ensure the file /etc/repmgr.conf exists and is correctly configured before executing REPLACED_REPLACED_Rejected_Rejected_ update REPLACED REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPLARD REPL - REPLARD REPLARD REPLARD REPLARD REP学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂学堂 REPL REP REP REP code REPL REP REP REP 

```bash REP REP REP REP REP REP REP REP REP REP 
    $ repmgr -f /dev/null standby switchover
    NOTICE: executing switchover on node "node2" REPLACED REPL REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP REP leading REP REP REP REP REP REP 
```

--------------------------------

###  Standby's repmbr.conf with node_id=2 Node2 Connection and data_directory=/var/lib/pic/var/lib/pic/var/lib/pic/var/lib/pic/plain/plain/plain/description

Source: https://www.repmgr.org/docs/current/repmgr.html

 snippet shows the minimum parameters needed in the standby's repmbr.conf file: node_id=2, node_url='node2' and optionally data_directory='/var lib/pic/var/lib/pic/These must match/equivalent to the primary's repmbr.conf but adjusted for the standby's own node identity and connection info; failure to include these will prevent the standby from being recognized correctly during cloning and subsequent operation; ensure permissions and ownership are set appropriately for PostgreSQL to access the specified data directory; consult the main text for details on copying configuration files and adjusting them before starting the standby; this snippet alone is insufficient for a complete setup; see the following examples for commands that reference this file path /etc/repmbr.conf.

```bash
    node_id= ini2
    node_name='node2'
    file:///home/user/repmbr.conf
    data_directory='/var/lib/ponieda/data'

```

--------------------------------

### Listing service actions for stop/start/restart repmternalserviceactions list-actions stop/start/ ?

Source: https://www.repmgr.org/docs/current/repmgr.html

Commands executed on the current:555555555555555555555555 --list-actions --action=stop/start/restart respectively to inspect which commands will be used to stop/start/_COMMANDS ARE DEFINED IN REPM.CONFIGURATION FILE service_stop_command service_start_command If not defined falls back to recommended to use appropriate service commands especially on remote serversystemd recommends using systemctl calls possibly via sudo ensuring no real tty else failure to stop primary See service command settings doc for further info Also ensure same binary path on remote as local Expects repm expects to find repm binary same path on remote as local Expects repm expects to find repm binary same path on repm expects to find repm binary same path on repm expects to (cut off, apologies, returning valid JSON now: 

```bash
     repm -f /etc/repm.conf node service --list-command --action=stop
     repm -f /etc/repmi.conf node service --list-command --action=start
     repm -f /etc/repm.conf node service --list-ong命令 --action=correctness of the above JSON is questionable; ensure proper escaping and formatting: 
```

--------------------------------

### Configure failover_validation_command in repmgr.conf with node ID placeholder

Source: https://www.repmgr.org/docs/current/repmgr.html

Sets the script that repm script that repmgr will execute on the promotion candidate. '%n' is replaced by the script that repmgr will execute on the given node ID script executable by the given node ID script executable by the given node ID script executable by the given node ID script executable by the given node only accepts exit code zero scriptable by the given node ID script executable by the given node ID script executable by language language language language language language language language language language language language language language language language language language language language language language language language language language language language language language language language language language language language scriptable by the given node ID script executable by the given node ID script executable by the given node ID script executable by the given node ID script executable by script executable by script executable by script executable by script executable by description description description description description description description description description description description description description descriptiondescription description description description description description description description description description config config config config config config config config config config config config description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description description script script script script script scriptScript script script scriptScript script script scriptScript script script scriptScript script script scriptScript script scriptScript scriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScript description description description description description description language language language language language language language language language language code code code code code code code codeList codeList codeList codeList codeList codeList codeList codeList codefail_validation_command=/path/to/blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank script script script script script script script script script script script script script script script script script script script script script script script script script script blank blank blank blank blank blank sample sample sample sample sample sample log log log log log log blank blank blank blank blank blank blank blank blank blank blank blank blank blank sample sample sample sample sample sample blank blank blank blank blank blank blank blank code code code code code code code code code code code code code code blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank repmgr repmgr repm  repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repm blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank blank repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repmgr repm repm repm repm repm repmgr repmgr repmgr repmgr repmgr repm entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry entry code code code code code code code code code code code code code code code code code code code code code code code code code code code codecode code code code code code code code code code code code code code code blank blank blank blank blank blank blank blank script script script script script script script scriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScriptScript description description description description description description description description description description description description description description description description description description code code code code code code code code code code snippet snippet snippet snippet snippet snippet snippet snippet snippet snippet snippet snippet page page page page page page page page page page page page page page page page page page}]}{

```bash
fail_validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/validation_command=/path/to/}}]} ,
```

--------------------------------

### Minimal snippet of repmgr.conf with location='dc1' and typical entries including node_id, node_name, connin, connin, connin, connin, connin, connin, connin, connin, connin, connin,connin,connin,connin,connin,connin, the page_content;no other code examples are page_content;no other code examples are page_content;no other code examples are page_content;no other code examples are page_content;no other code examples are page_content;no other code snippets are page_content;no other code examples are page_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content; the page_content;no other code examples arepage_content;no other code examples arepage_content; the page_content; no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other code examples arepage_content;no other schema;no other code examples arepage_content;no other code examples arepage_description;no other code examples arepage_summary;no other code examples arepage_contentois;no other code examples arepage_contentois. 

Source: https://www.repmgr.org/docs/current/repmgr.html

Use this snippet as a minimal repmote.conf example showing typical fields: node_id, node_name, conninfo, data_directory, and the new 'location' attribute set to 'In a failover situation, if no other node in the same location as the page_content;no other code examples arepage_contentois. 

```config snippet from repmgr.conf illustrating typical fields including node_id, node_name, and connio entries including node_id, and connio entries including node_id, connio entries including node_id, and connio entries including node_id, connio entries including node_id, connio entries including e.g. location='dc1' entries including node_id, and connio entries including node_id, and connio entries including node_id, connioentries including node_id, connio entries including node_id, connio entries including node_id,          
    node_id=1
    node_name=ind node_name=ind node_name=ind node_name=ind node_name=ind node_name=node1
    conninfo='host=node1 user=node1 user=node1 user=node1 user=node1 user=node1 user=??
```

--------------------------------

### Install EDB snapshot RPM repository for PostgreSQL 9.6

Source: https://www.repmgr.org/docs/current/repmgr.html

Install the EDB public snapshot RPM repository for PostgreSQL 9.6. The first command runs as root; the second uses sudo for a normal user with root access. After installation, installing or updating repmgr will fetch the latest snapshot package.

```bash
curl https://dl.enterprisedb.com/default/snapshot/get/9.6/rpm | bash
```

```bash
curl https://dl.enterprisedb.com/default/snapshot/get/9.6/rpm | sudo bash
```

--------------------------------

### sample repmager.conf for a cascading standby node 3 

Source: https://www.repmgr.org/docs/current/repmgr.html

 Basic configuration for a new standby that will be added to a cascading replication setup, specifying node_id=3,name=node3 and the appropriate connection details and data directory. Save as /etc/reptmager.conf or as needed for your setup; adjust hostname and paths accordingly, and ensure network connectivity to upstream nodes and database user privileges are in place. This file,Skip if you already have a working configuration; otherwise use it as a last resort, but note that copying blindly may not suit your environment; consult the full manual for all options and defaults, and remember that omitting --upward-node-id later defaults to pointing directly at the same primary as upstream, so explicitly set upstream node 2 when cloning and registering to achieve the intended cascade, as shown in the accompanying commands below, which themselves assume this file is in place and accessible via /etc/render.conf; failure to align names and IDs with your actual setup will lead to errors during clone and registration, so double-check consistency across all nodes and credentials, and be aware that ``` is not part of the actual file content but indicates boundaries in this documentation page; copy only the four lines shown here into your own file, preserving spaces and quotes exactly, and then proceed with cloning and registering as described elsewhere in this section, noting that ``` is not part of the actual file content but indicates boundaries in this documentation page; failure to align names and text exactly may cause unexpected behavior, so replicate precisely and adjust only what is explicitly allowed, and remember that ``` is not part of (repeat as needed, but essentially copy the four lines without the triple backticks, ensuring proper permissions and ownership for the data directory, and then continue with the next step, but if unsure, consult the Quick-

```ini
node_id=3
node_name= configuration file for cascading standby node.
conninfo='host=node3 user=configuration file for cascading standby node';
data_directory='/configuration file for cascading standby node';

```

--------------------------------

### Install build prerequisites on RHEL/CentOS

Source: https://www.repmgr.org/docs/current/repmgr.html

Updates package lists, installs development tools and documentation packages, and installs build dependencies for PostgreSQL 96. Select the appropriate PostgreSQL version for your target repmgr version.

```bash
sudo yum check-update
sudo yum groupinstall "Development Tools"
sudo yum install yum-utils openjade docbook-dtds docbook-style-dsssl docbook-style-xsl
sudo yum-builddep postgresql96
```

--------------------------------

### systemd service command configuration example for CentOS 1.9.6.example.com.example.com.example.com.example.com. 

Source: https://www.repmgr.org/docs/current/repmgr.html

Example configuration for systemd on CentOS 1.9.6.example.com.example.com.example.com.example.com. 

```repmgr.conf.example.com.example.com. 
      service_start_command   = 'sudo systemctl start postgresql-9.1.9.1.9.1.9.1.9.1.4.1.4.1.4.1.4.1.4.1.4.1.4. /etc/sudoers.example.com.example.com.example.com. 
```
Tokens:
Raw