Rclone

https://rclone.org/
Admin
Rclone is a command-line program to manage files on cloud storage, supporting over 70 cloud storage...
Tokens:570,712
Snippets:4,357
Trust Score:10
Update:3 weeks ago
Show doc for...
Tokens:
Raw
### Sample files-from.txt for --files-from

Source: https://rclone.org/filtering

Example files-from.txt for --files-from. Lines starting with # are ignored. Leading/trailing whitespace is stripped. Paths are relative to the root specified in the rclone command.

```plaintext
# comment
file1.jpg
subdir/file2.jpg

```

--------------------------------

### Interactive setup session for WebDAV remote

Source: https://rclone.org/webdav

Example interactive output showing the steps to create a WebDAV remote named 'remote' with vendor Nextcloud. User enters URL, vendor number, username, and password.

```text
No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / WebDAV
   \ "webdav"
[snip]
Storage> webdav
URL of http host to connect to
Choose a number from below, or type in your own value
 1 / Connect to example.com
   \ "https://example.com"
url> https://example.com/remote.php/webdav/
Name of the WebDAV site/service/software you are using
Choose a number from below, or type in your own value
 1 / Fastmail Files
   \ (fastmail)
 2 / Nextcloud
   \ (nextcloud)
 3 / Owncloud
   \ (owncloud)
 4 / Sharepoint Online, authenticated by Microsoft account
   \ (sharepoint)
 5 / Sharepoint with NTLM authentication, usually self-hosted or on-premises
   \ (sharepoint-ntlm)
 6 / rclone WebDAV server to serve a remote over HTTP via the WebDAV protocol
   \ (rclone)
 7 / Other site/service or software
   \ (other)
vendor> 2
User name
user> user
Password.
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank
y/g/n> y
Enter the password:
password:
Confirm the password:
password:
Bearer token instead of user/pass (e.g. a Macaroon)
bearer_token>
Remote config
Configuration complete.
Options:
- type: webdav
- url: https://example.com/remote.php/webdav/
- vendor: nextcloud
- user: user
- pass: *** ENCRYPTED ***
- bearer_token:
Keep this "remote" remote?
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

```

--------------------------------

### Interactive filefabric remote setup

Source: https://rclone.org/filefabric

Interactive setup output for creating a filefabric remote. Requires a permanent authentication token from the Enterprise File Fabric dashboard. The example uses url https://yourfabric.smestorage.com/ and a placeholder token.

```text
No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
[snip]
XX / Enterprise File Fabric
   \ "filefabric"
[snip]
Storage> filefabric
** See help for filefabric backend at: https://rclone.org/filefabric/ **

URL of the Enterprise File Fabric to connect to
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
 1 / Storage Made Easy US
   \ "https://storagemadeeasy.com"
 2 / Storage Made Easy EU
   \ "https://eu.storagemadeeasy.com"
 3 / Connect to your Enterprise File Fabric
   \ "https://yourfabric.smestorage.com"
url> https://yourfabric.smestorage.com/
ID of the root folder
Leave blank normally.

Fill in to make rclone start with directory of a given ID.

Enter a string value. Press Enter for the default ("").
root_folder_id> 
Permanent Authentication Token

A Permanent Authentication Token can be created in the Enterprise File
Fabric, on the users Dashboard under Security, there is an entry
you'll see called "My Authentication Tokens". Click the Manage button
to create one.

These tokens are normally valid for several years.

For more info see: https://docs.storagemadeeasy.com/organisationcloud/api-tokens

Enter a string value. Press Enter for the default ("").
permanent_token> xxxxxxxxxxxxxxx-xxxxxxxxxxxxxxxx
Edit advanced config? (y/n)
y) Yes
n) No (default)
y/n> n
Remote config
Configuration complete.
Options:
- type: filefabric
- url: https://yourfabric.smestorage.com/
- permanent_token: xxxxxxxxxxxxxxx-xxxxxxxxxxxxxxxx
Keep this "remote" remote?
y) Yes this is OK (default)
e) Edit this remote
d) Delete this remote
y/e/d> y

```

--------------------------------

### Interactive setup output for 1Fichier remote

Source: https://rclone.org/fichier

Example interactive session for configuring a remote named 'remote' with the 1Fichier backend. Requires a Premium subscription and an API key from https://1fichier.com/console/params.pl.

```text
No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
[snip]
XX / 1Fichier
   \ "fichier"
[snip]
Storage> fichier
** See help for fichier backend at: https://rclone.org/fichier/ **

Your API Key, get it from https://1fichier.com/console/params.pl
Enter a string value. Press Enter for the default ("").
api_key> example_key

Edit advanced config? (y/n)
y) Yes
n) No
y/n> 
Remote config
Configuration complete.
Options:
- type: fichier
- api_key: example_key
Keep this "remote" remote?
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

```

--------------------------------

### options/get example

Source: https://rclone.org/rc

Retrieves the current options, which include the vfs and mount sections referenced by the mount/mount examples. This is useful for viewing available vfsOpt and mountOpt parameters.

```bash
rclone rc options/get

```

--------------------------------

### Start interactive rclone config for OpenDrive

Source: https://rclone.org/opendrive

Run `rclone config` to begin the interactive setup process for creating a new remote. The subsequent interactive session guides you through choosing OpenDrive storage and entering credentials.

```bash
rclone config

```

```text
n) New remote
d) Delete remote
q) Quit config
e/n/d/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / OpenDrive
   \ "opendrive"
[snip]
Storage> opendrive
Username
username>
Password
y) Yes type in my own password
g) Generate random password
y/g> y
Enter the password:
password:
Confirm the password:
password:
Configuration complete.
Options:
- type: opendrive
- username:
- password: *** ENCRYPTED ***
Keep this "remote" remote?
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

```

--------------------------------

### Get OneDrive Drive ID with Microsoft Graph

Source: https://rclone.org/onedrive

Use these PowerShell commands to install the Microsoft Graph module, connect with the required scope, and retrieve the default drive ID for a user you want to impersonate. The output includes the drive ID (e.g., b!XYZ123) needed for the rclone remote setup.

```powershell
Install-Module Microsoft.Graph -Scope CurrentUser -Repository PSGallery -Force
Import-Module Microsoft.Graph.Files
Connect-MgGraph -Scopes "Files.ReadWrite.All"
# Follow the steps to allow access to your admin user
# Then run this for each user you want to impersonate to get the Drive ID
Get-MgUserDefaultDrive -UserId '{emailaddress}'
# This will give you output of the format:
# Name     Id                                                                 DriveType CreatedDateTime
# ----     --                                                                 --------- ---------------
# OneDrive b!XYZ123                                                           business  14/10/2023    1:00:58 pm
```

--------------------------------

### serve/start

Source: https://rclone.org/rc

Starts a new server instance with the given type, filesystem, and address. Returns the address and unique ID of the started server.

```APIDOC
## serve/start

### Description
Creates a new server with the specified parameters. This endpoint starts a new serve instance of the given type, serving the specified remote storage path on the given address.

### Method
POST

### Endpoint
serve/start

### Parameters
#### Request Body
- **type** (string) - Required - Type of server: `http`, `webdav`, `ftp`, `sftp`, `nfs`, etc.
- **fs** (string) - Required - Remote storage path to serve.
- **addr** (string) - Required - The ip:port to run the server on, eg ":1234" or "localhost:1234".
- **vfs_cache_mode** (string) - Optional - VFS cache mode, translated from `--vfs-cache-mode`.
- **vfsOpt** (object) - Optional - Nested JSON object for VFS options, e.g. `{"CacheMode": 2}`.
- **proxyOpt** (object) - Optional - Nested JSON object for proxy options, e.g. `{"AuthProxy": "http://127.0.0.1:8080"}`.
- **opt** (object) - Optional - Nested JSON object for protocol-specific options.

### Request Example
```
rclone rc serve/start type=nfs fs=remote: addr=:4321 vfs_cache_mode=full
rclone rc serve/start --json '{"type":"nfs","fs":"remote:","addr":":1234","vfs_cache_mode":"full"}'
rclone rc serve/start type=webdav fs=remote: vfsOpt='{"CacheMode": 2}' proxyOpt='{"AuthProxy": "http://127.0.0.1:8080"}'
```

### Response
#### Success Response (200)
- **addr** (string) - Address the server was started on.
- **id** (string) - Unique identifier for the server instance.

#### Response Example
```
{
    "addr": "[::]:4321",
    "id": "nfs-ecfc6852"
}
```

### Error Response
Returns an error if the server failed to start.
```

--------------------------------

### mount/mount examples

Source: https://rclone.org/rc

Shows various ways to create a mount point with the mount/mount rc command. Examples include using default mount type, specifying mountType, passing vfsOpt and mountOpt as JSON, using flat parameters, and using '*' for Windows drive letter assignment.

```bash
rclone rc mount/mount fs=mydrive: mountPoint=/home/<user>/mountPoint
rclone rc mount/mount fs=mydrive: mountPoint=/home/<user>/mountPoint mountType=mount
rclone rc mount/mount fs=TestDrive: mountPoint=/mnt/tmp vfsOpt='{"CacheMode": 2}' mountOpt='{"AllowOther": true}'
rclone rc mount/mount fs=TestDrive: mountPoint=/mnt/tmp vfs_cache_mode=writes volname=MyTestVolume
rclone rc mount/mount fs=mydrive: mountPoint=* mountType=cmount

```

--------------------------------

### Get temporary access token with gcloud

Source: https://rclone.org/googlecloudstorage

Gets a temporary access token for the service account using impersonation. The output shows a truncated token example.

```bash
$ gcloud auth application-default print-access-token  \
   --impersonate-service-account \
      gcs-read-only@${PROJECT_ID}.iam.gserviceaccount.com  

ya29.c.c0ASRK0GbAFEewXD [truncated]

```

--------------------------------

### Install rclone Docker plugin with custom options

Source: https://rclone.org/docker

Use these commands to remove any existing rclone plugin and install it with custom arguments and config path. The plugin is installed with alias 'rclone', grant-all-permissions, and sets args to '-v --allow-other' and config to '/etc/rclone'. After installation, the plugin is inspected to verify the setup.

```bash
docker plugin remove rclone
docker plugin install rclone/docker-volume-rclone:amd64 \
       --alias rclone --grant-all-permissions \
       args="-v --allow-other" config=/etc/rclone
docker plugin inspect rclone

```

--------------------------------

### Show running servers with serve/list and example output

Source: https://rclone.org/rc

Shows running serve commands with their IDs. Takes no parameters and returns a list of servers, each with id, addr, and params. The example output shows an NFS server on [::]:4321 with full cache mode.

```bash
rclone rc serve/list

```

```json
{
    "list": [
        {
            "addr": "[::]:4321",
            "id": "nfs-ffc2a4e5",
            "params": {
                "fs": "remote:",
                "opt": {
                    "ListenAddr": ":4321"
                },
                "type": "nfs",
                "vfsOpt": {
                    "CacheMode": "full"
                }
            }
        }
    ]
}

```

--------------------------------

### Example --sftp-ssh command

Source: https://rclone.org/sftp

Example setting for the --sftp-ssh option, showing how to specify an external ssh binary with arguments.

```bash
ssh -o ServerAliveInterval=20 user@example.com
```

--------------------------------

### Start rclone config for Cloudinary remote

Source: https://rclone.org/cloudinary

Run this command to begin the interactive setup for creating a new Cloudinary remote.

```bash
rclone config

```

--------------------------------

### Connection string examples

Source: https://rclone.org/docs

Shows basic connection string usage for http and sftp backends, including listing, copying, and using on-the-fly remotes.

```bash
rclone lsd ":http,url='https://pub.rclone.org':"
rclone lsf ":http,url='https://example.com':path/to/dir"
rclone copy ":http,url='https://example.com':path/to/dir" /tmp/dir
rclone copy :sftp,host=example.com:path/to/dir /tmp/dir

```

--------------------------------

### Example source files

Source: https://rclone.org/commands/rclone_copy

Example listing of two files in the source directory that are copied to the destination.

```text
sourcepath/one.txt
sourcepath/two.txt

```

--------------------------------

### macFUSE macports setup

Source: https://rclone.org/commands/rclone_mount

Required when macFUSE is installed via macports. Creates /usr/local/lib and symlinks the macFUSE library so rclone can locate it.

```bash
sudo mkdir /usr/local/lib
cd /usr/local/lib
sudo ln -s /opt/local/lib/libfuse.2.dylib

```

--------------------------------

### Copy files with :sftp: backend

Source: https://rclone.org/docs

Copies files and directories from example.com in the relative directory path/to/dir to /tmp/dir using the on-the-fly :sftp: backend.

```bash
rclone copy --sftp-host example.com :sftp:path/to/dir /tmp/dir

```

--------------------------------

### rclone gui startup logs

Source: https://rclone.org/gui

Example logs produced when starting the GUI. The terminal window needs to stay open to continue running the GUI.

```text
2026/04/14 11:36:04 NOTICE: Serving remote control on http://127.0.0.1:50803/
2026/04/14 11:36:04 NOTICE: Serving GUI on http://127.0.0.1:50802/
2026/04/14 11:36:04 NOTICE: GUI available at http://127.0.0.1:50802/login?pass=XXX&url=http%3A%2F%2F127.0.0.1%3A50803%2F&user=gui

```

--------------------------------

### serve/start reply with addr and id

Source: https://rclone.org/rc

Example reply from serve/start. The addr field shows the address the server was started on and id is the unique identifier used later with serve/stop.

```json
{
    "addr": "[::]:4321", // Address the server was started on
    "id": "nfs-ecfc6852" // Unique identifier for the server instance
}
```

--------------------------------

### config/paths example output

Source: https://rclone.org/rc

Example output of the config/paths endpoint, showing the paths to the config file, cache directory, and temporary directory.

```json
{
    "cache": "/home/USER/.cache/rclone",
    "config": "/home/USER/.rclone.conf",
    "temp": "/tmp"
}

```

--------------------------------

### Get drive config parameters

Source: https://rclone.org/drive

Fetch drive config parameters such as chunk_size and service_account_file. The first block shows the general syntax, the second shows usage examples for both CLI and rc.

```bash
rclone backend get remote: [options] [<arguments>+]

```

```bash
rclone backend get drive: [-o service_account_file] [-o chunk_size]
rclone rc backend/command command=get fs=drive: [-o service_account_file] [-o chunk_size]

```

--------------------------------

### Directory tree with symlinks for --links example (tree /tmp/a)

Source: https://rclone.org/local

Shows symlinks file1 -> ./file4 and file2 -> /home/user/file3 used to demonstrate the --links flag.

```shell
$ tree /tmp/a
/tmp/a
├── file1 -> ./file4
└── file2 -> /home/user/file3

```

--------------------------------

### Usage examples for rclone backend set

Source: https://rclone.org/http

Usage examples for the set command. The first shows the CLI form, the second shows the rc form with options, and the third shows setting the url option via the rc interface.

```bash
rclone backend set remote: [-o opt_name=opt_value] [-o opt_name2=opt_value2]

```

```bash
rclone rc backend/command command=set fs=remote: [-o opt_name=opt_value] [-o opt_name2=opt_value2]

```

```bash
rclone rc backend/command command=set fs=remote: -o url=https://example.com

```

--------------------------------

### Interactive B2 remote configuration session

Source: https://rclone.org/b2

Example of the interactive setup process for a B2 remote, showing prompts for account ID, application key, and endpoint. The remote is named 'remote'.

```text
No remotes found, make a new one\?
n) New remote
q) Quit config
n/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / Backblaze B2
   \ "b2"
[snip]
Storage> b2
Account ID or Application Key ID
account> 123456789abc
Application Key
key> 0123456789abcdef0123456789abcdef0123456789
Endpoint for the service - leave blank normally.
endpoint>
Remote config
Configuration complete.
Options:
- type: b2
- account: 123456789abc
- key: 0123456789abcdef0123456789abcdef0123456789
- endpoint:
Keep this "remote" remote?
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

```

--------------------------------

### Sample filter-file.txt for --filter-from

Source: https://rclone.org/filtering

Example filter file for --filter-from. Lines starting with # are comments. Rules are processed in order; include rules start with '+ ' and exclude rules with '- '. The line '- /dir/tmp/** # WARNING! This text will be treated as part of the path.' shows that inline comments are not supported and the text after # becomes part of the path.

```plaintext
# a sample filter rule file
- secret*.jpg
+ *.jpg
+ *.png
+ file2.avi
- /dir/tmp/** # WARNING! This text will be treated as part of the path.
- /dir/Trash/**
+ /dir/**
# exclude everything else
- *

```

--------------------------------

### Interactive setup output for HTTP remote

Source: https://rclone.org/http

Shows the interactive setup process for creating an HTTP remote named 'remote' with URL https://beta.rclone.org. The output includes the prompts and final configuration summary.

```text
No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / HTTP
   \ "http"
[snip]
Storage> http
URL of http host to connect to
Choose a number from below, or type in your own value
 1 / Connect to example.com
   \ "https://example.com"
url> https://beta.rclone.org
Remote config
Configuration complete.
Options:
- type: http
- url: https://beta.rclone.org
Keep this "remote" remote?
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Current remotes:

Name                 Type
====                 ====
remote               http

e) Edit existing remote
n) New remote
d) Delete remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
e/n/d/r/c/s/q> q

```

--------------------------------

### List files in a path with :http: backend

Source: https://rclone.org/docs

Lists files and directories in https://example.com/path/to/dir/ using the on-the-fly :http: backend.

```bash
rclone lsf --http-url https://example.com :http:path/to/dir

```

--------------------------------

### Interactive Files.com remote setup

Source: https://rclone.org/filescom

Example interactive session showing how to configure a new Files.com remote named 'remote'. Select 'filescom' as the storage type, enter your site subdomain, username, and password, then confirm the configuration.

```text
No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n

Enter name for new remote.
name> remote

Option Storage.
Type of storage to configure.
Choose a number from below, or type in your own value.
[snip]
XX / Files.com
  \ "filescom"
[snip]
Storage> filescom

Option site.
Your site subdomain (e.g. mysite) or custom domain (e.g. myfiles.customdomain.com)
Enter a value. Press Enter to leave empty.
site> mysite

Option username.
The username used to authenticate with Files.com.
Enter a value. Press Enter to leave empty.
username> user

Option password.
The password used to authenticate with Files.com.
Choose an alternative below. Press Enter for the default (n).
y) Yes, type in my own password
g) Generate random password
n) No, leave this optional password blank (default)
y/g/n> y
Enter the password:
password:
Confirm the password:
password:

Edit advanced config?
y) Yes
n) No (default)
y/n> n

Configuration complete.
Options:
- type: filescom
- site: mysite
- username: user
- password: *** ENCRYPTED ***
Keep this "remote" remote?
y) Yes this is OK (default)
e) Edit this remote
d) Delete this remote
y/e/d> y

```

--------------------------------

### include-file.txt sample

Source: https://rclone.org/filtering

Example include-file.txt used with --include-from. Contains a comment line and two patterns: *.jpg and file2.avi.

```text
# a sample include rule file
*.jpg
file2.avi

```

--------------------------------

### Interactive setup output for Huawei Drive remote

Source: https://rclone.org/huaweidrive

Example of the interactive configuration process for creating a remote named 'remote' with storage type 'huaweidrive'. It shows the prompts and responses, including OAuth client ID/secret and web browser authentication.

```text
No remotes found, make a new one?
n) New remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
n/r/c/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / Huawei Drive
   \ "huaweidrive"
[snip]
Storage> huaweidrive
OAuth Client Id - leave blank to use rclone's default.
client_id> 
OAuth Client Secret - leave blank to use rclone's default.
client_secret>
Remote config
Use web browser to automatically authenticate rclone with remote?
 * Say Y if the machine running rclone has a web browser you can use
 * Say N if running rclone on a (remote) machine without web browser access
If not sure try Y. If Y failed, try N.
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
Configuration complete.
Options:
- type: huaweidrive
- client_id: 
- client_secret: 
- token: {"access_token":"XXX","token_type":"Bearer","refresh_token":"XXX","expiry":"2024-03-16T13:57:58.955387075Z"}
Keep this "remote" remote?
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

```

--------------------------------

### addurl usage examples

Source: https://rclone.org/pikpak

Examples of using the addurl command. Downloads are stored in 'dirpath', or fallback to 'My Pack' if invalid. The -o name option sets a custom filename.

```shell
rclone backend addurl pikpak:dirpath url

```

```shell
rclone backend addurl pikpak:dirpath url -o name=custom_filename.zip

```

--------------------------------

### Interactive setup output for Yandex remote

Source: https://rclone.org/yandex

Example interactive session output when configuring a Yandex remote. Shows selecting 'yandex' storage, leaving client ID/secret blank, and authenticating via web browser. The token is stored in the remote configuration.

```text
No remotes found, make a new one?
n) New remote
s) Set configuration password
n/s> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / Yandex Disk
   \ "yandex"
[snip]
Storage> yandex
Yandex Client Id - leave blank normally.
client_id>
Yandex Client Secret - leave blank normally.
client_secret>
Remote config
Use web browser to automatically authenticate rclone with remote?
 * Say Y if the machine running rclone has a web browser you can use
 * Say N if running rclone on a (remote) machine without web browser access
If not sure try Y. If Y failed, try N.
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
Configuration complete.
Options:
- type: yandex
- client_id:
- client_secret:
- token: {"access_token":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","token_type":"OAuth","expiry":"2016-12-29T12:27:11.362788025Z"}
Keep this "remote" remote?
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
```

--------------------------------

### Directory tree for --one-file-system example

Source: https://rclone.org/local

Shows a directory hierarchy with mounted disks to illustrate the --one-file-system flag.

```shell
root
├── disk1     - disk1 mounted on the root
│   └── file3 - stored on disk1
├── disk2     - disk2 mounted on the root
│   └── file4 - stored on disk12
├── file1     - stored on the root disk
└── file2     - stored on the root disk

```

--------------------------------

### Interactive pCloud remote setup session

Source: https://rclone.org/pcloud

Example interactive session for creating a pCloud remote named 'remote'. The output shows the prompts and responses, including the token obtained via web browser authentication. Note that the token shown is a placeholder.

```text
No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / Pcloud
   \ "pcloud"
[snip]
Storage> pcloud
Pcloud App Client Id - leave blank normally.
client_id> 
Pcloud App Client Secret - leave blank normally.
client_secret> 
Edit advanced config?
y) Yes
n) No (default)
y/n> n
Remote config
Use web browser to automatically authenticate rclone with remote?
 * Say Y if the machine running rclone has a web browser you can use
 * Say N if running rclone on a (remote) machine without web browser access
If not sure try Y. If Y failed, try N.
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
Configuration complete.
Options:
- type: pcloud
- client_id:
- client_secret:
- token: {"access_token":"XXX","token_type":"bearer","expiry":"0001-01-01T00:00:00Z"}
Keep this "remote" remote?
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

```
Tokens:
Raw