### Quickstart: setup, wallet creation, and operations

Source: https://docs.polygon.technology/wallets/agentic-wallets

A step-by-step quickstart covering setup, access key export, wallet creation, funding, balances, sending, swapping, and agent registration. All commands are dry-run by default; add --broadcast to execute.

```bash
# 1. Create an EOA and get a project access key
polygon-agent setup --name "MyAgent"

# 2. Set your access key
export SEQUENCE_PROJECT_ACCESS_KEY=<access-key>

# 3. Create a wallet (opens browser for one-time approval)
polygon-agent wallet create

# 4. Fund the wallet
polygon-agent fund

# 5. Start operating
polygon-agent balances
polygon-agent send --symbol USDC --to 0x... --amount 10 --broadcast
polygon-agent swap --from USDC --to USDT --amount 5 --broadcast

# 6. Register your agent onchain
polygon-agent agent register --name "MyAgent" --broadcast
```

--------------------------------

### Install and setup Polygon Agent CLI

Source: https://docs.polygon.technology/payment-services/agentic-payments/solutions/treasury-yield-sweep

Install the CLI globally, initialize the treasury agent, and create a smart wallet with DeFi capabilities enabled.

```bash
npm install -g @polygonlabs/agent-cli
polygon-agent setup --name "treasury"
polygon-agent wallet create --defi --usdc-limit 50000
```

--------------------------------

### Install and Setup Polygon Agent CLI

Source: https://docs.polygon.technology/payment-services/agentic-payments/solutions/cross-corridor-payouts

Install the CLI globally and initialize the treasury agent with a specified USDC limit.

```bash
npm install -g @polygonlabs/agent-cli
polygon-agent setup --name "ap-treasury"
polygon-agent wallet create --usdc-limit 100000
```

--------------------------------

### Setup and create smart wallet example

Source: https://docs.polygon.technology/payment-services/agentic-payments/cli/setup-and-wallets

A complete workflow for initializing a machine, creating a smart wallet with specific spending caps and DeFi access, and verifying the wallet status.

```bash
# One-time per machine
polygon-agent setup --name "treasury"

# Smart wallet with caps
polygon-agent wallet create \
  --name treasury \
  --chain polygon \
  --usdc-limit 1000 \
  --usdt-limit 1000 \
  --defi

# Confirm
polygon-agent wallet list
polygon-agent wallet address --name treasury
```

--------------------------------

### Install and set up Polygon Agent CLI for Polymarket

Source: https://docs.polygon.technology/payment-services/agentic-payments/solutions/polymarket-hedging

Installs the @polygonlabs/agent-cli globally, creates a hedging desk wallet with a USDC limit, and performs one-time Polymarket setup: importing an EOA private key and approving the proxy wallet. The smart wallet funds the Polymarket proxy on each buy; size --usdc-limit to match the maximum notional you intend to hedge.

```bash
npm install -g @polygonlabs/agent-cli
polygon-agent setup --name "hedging-desk"
polygon-agent wallet create --usdc-limit 5000

# One-time Polymarket setup
polygon-agent polymarket set-key 0xYOUR_EOA_PRIVATE_KEY
polygon-agent polymarket approve --broadcast
```

--------------------------------

### Install WalletKit with npm

Source: https://docs.polygon.technology/tools/wallets/walletkit

Install the @walletkit/react-link and walletkit-js packages to get started with the SDK. This is an alternative to yarn.

```bash
npm i @walletkit/react-link walletkit-js
```

--------------------------------

### Install Heimdall (specific version example)

Source: https://docs.polygon.technology/pos/how-to/validator/validator-packages

Example command to install a specific Heimdall version, node type, and network. This example installs v0.11.0 for mainnet sentry. Heimdall versions below v0.11.0 fell out of consensus at the Kyoto hardfork.

```shell
  # Example:
  curl -L https://raw.githubusercontent.com/0xPolygon/install/heimdall-v2/heimdall-v2.sh | bash -s -- v0.11.0 mainnet sentry
```

--------------------------------

### dapp-launchpad init help

Source: https://docs.polygon.technology/tools/dApp-development/launchpad/commands

Displays help for the `init` command.

```bash
dapp-launchpad init -h
```

--------------------------------

### Install Bor specific version example

Source: https://docs.polygon.technology/pos/how-to/full-node/full-node-packages

Example command to install a specific version of Bor for a sentry node on Mainnet.

```shell
# Example:
# curl -L https://raw.githubusercontent.com/0xPolygon/install/main/bor.sh | bash -s -- v2.2.9 mainnet sentry
```

--------------------------------

### Install Heimdall specific version example

Source: https://docs.polygon.technology/pos/how-to/full-node/full-node-packages

Example command to install a specific version of Heimdall for a validator node on Mainnet.

```shell
# Example:
# curl -L https://raw.githubusercontent.com/maticnetwork/install/heimdall-v2/heimdall-v2.sh | bash -s -- v0.2.15 mainnet validator
```

--------------------------------

### Install Sequence Connect and Indexer packages

Source: https://docs.polygon.technology/wallets/treasury-wallet

Install the frontend and backend dependencies. The frontend uses @0xsequence/connect, wagmi, and viem for client session grants, while the backend uses @0xsequence/indexer for monitoring.

```bash
# Frontend (client session grant)
pnpm install @0xsequence/connect wagmi viem

# Backend (monitoring)
pnpm install @0xsequence/indexer
```

--------------------------------

### Initialize a new dApp Launchpad project

Source: https://docs.polygon.technology/tools/dApp-development/launchpad/quickstart

Creates a new directory, scaffolds a minimal dApp project, and installs required packages. Replace <PROJECT-NAME> with your project name.

```bash
dapp-launchpad init <PROJECT-NAME>
```

--------------------------------

### Clean up sentry node setup

Source: https://docs.polygon.technology/pos/how-to/validator/validator-ansible

Runs the clean playbook to start over if an issue occurs during setup.

```sh
ansible-playbook -l sentry playbooks/clean.yml
```

--------------------------------

### Setup project and create wallet

Source: https://docs.polygon.technology/payment-services/agentic-payments/cli/index

Initializes the project and creates a smart wallet. The setup command writes the EOA and OMS access key to ~/.polygon-agent/builder.json. The wallet create command opens a browser approval flow and pairs a smart wallet using a six-digit code.

```bash
polygon-agent setup --name "my-project"
polygon-agent wallet create
```

--------------------------------

### ABIManager Example: Set and Get ABI for ERC20PredicateProxy

Source: https://docs.polygon.technology/tools/matic-js/advanced/abi-manager

Concrete example using 'testnet' and 'amoy' as network and version. Sets and gets the ABI for 'ERC20PredicateProxy' with bridge type 'pos'. The 'abi value' is a placeholder.

```javascript
import { ABIManager } from '@maticnetwork/maticjs'


const manager = new ABIManager('testnet','amoy');
await manager.init();

// set abi

manager.setABI('ERC20PredicateProxy','pos', 'abi value');

// get abi

manager.getABI('ERC20PredicateProxy','pos');
```

--------------------------------

### GET /transactions example response

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/bridge-hub/api-reference

Example JSON response for the /transactions endpoint, showing a transaction object and the nextStartAfterCursor for pagination.

```json
{
  "data": [
    {
      "hubUID": "tx-0001",
      "sourceNetwork": 1,
      "destinationNetwork": 2442,
      "transactionHash": "0xabc123...",
      "blockNumber": 19500000,
      "timestamp": 1710000000,
      "leafType": "ASSET",
      "originTokenNetwork": 1,
      "originTokenAddress": "0x0000000000000000000000000000000000000000",
      "receiverAddress": "0xdef456...",
      "fromAddress": "0x789abc...",
      "amount": "1000000000000000000",
      "depositCount": 42,
      "leafIndexForProof": 42,
      "globalIndex": "42",
      "status": "READY_TO_CLAIM",
      "lastUpdatedAt": 1710000300,
      "claimTransactionHash": null,
      "claimBlockNumber": null,
      "claimTimestamp": null
    }
  ],
  "nextStartAfterCursor": "eyJsYXN0SWQiOiJ0eC0wMDAxIn0="
}
```

--------------------------------

### Install v2 packages for buyers and sellers

Source: https://docs.polygon.technology/payment-services/agentic-payments/x402/guides/migration-v1-to-v2

Install commands for v2 packages. Buyers install @x402/fetch, @x402/core, @x402/evm, and viem. Sellers using Express install @x402/express, @x402/core, @x402/evm, and express.

```bash
# Buyers
npm install @x402/fetch @x402/core @x402/evm viem

# Sellers (Express)
npm install @x402/express @x402/core @x402/evm express
```

--------------------------------

### Clean up validator node setup

Source: https://docs.polygon.technology/pos/how-to/validator/validator-ansible

Runs the Ansible playbook 'playbooks/clean.yml' to start over if an issue is encountered during the validator node setup.

```sh
ansible-playbook -l validator playbooks/clean.yml
```

--------------------------------

### Start the development environment

Source: https://docs.polygon.technology/tools/dApp-development/launchpad/quickstart

Starts the local test blockchain, deploys contracts, and lists pre-funded wallets. Open http://localhost:3000 in a browser. Changes to smart contract or frontend code update automatically.

```bash
dapp-launchpad dev
```

--------------------------------

### Monitor installation progress with screen

Source: https://docs.polygon.technology/pos/how-to/full-node/full-node-gcp

Use screen to watch the installation progress, especially when bootstrapping from a snapshot. Disconnect with Control+a d.

```bash
# inside the connected session
screen -dr
```

--------------------------------

### JSON response structure for GET /bridges

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/aggkit-bridge-service/api-reference

Example JSON response from the GET /bridges endpoint, showing the bridges array and pagination object.

```json
{
  "bridges": [
    {
      "tx_hash": "0x8d1b60d0eaab6f609955bdd371e8004f47349cc809ff1bee81dc9d37237a031c",
      "deposit_count": 42,
      "origin_network": 0,
      "destination_network": 1,
      "origin_address": "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266",
      "destination_address": "0x70997970C51812dc3A010C7d01b50e0d17dc79C8",
      "amount": "1000000000000000000",
      "block_timestamp": 1695563045,
      "ready_for_claim": true
    }
  ],
  "pagination": {
    "page": 1,
    "limit": 10,
    "total": 150
  }
}
```

--------------------------------

### Deploy consumer instance with environment variables

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/bridge-hub/deployment

Start a new consumer with the network's configuration using environment variables. Set NETWORK_ID, NETWORK, BRIDGE_CONTRACT_ADDRESS, BRIDGE_SERVICE_URL, and MONGODB_CONNECTION_URI, then run 'bun start'.

```bash
NETWORK_ID=42161 \
NETWORK=mainnet \
BRIDGE_CONTRACT_ADDRESS=0x... \
BRIDGE_SERVICE_URL=https://aggkit-42161.example.com \
MONGODB_CONNECTION_URI=mongodb://... \
bun start
```

--------------------------------

### GET /sync-status - Component Synchronization Status - curl request

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/aggkit-bridge-service/api-reference

Example request to get the synchronization status of L1, L2, and bridge components.

```bash
curl "http://localhost:5577/bridge/v1/sync-status"
```

--------------------------------

### dapp-launchpad init command

Source: https://docs.polygon.technology/tools/dApp-development/launchpad/commands

Initializes a new project in a new directory. If no project name is provided, a random name is chosen. The `-t, --template` option specifies the scaffold template (default: `"javascript"`).

```bash
dapp-launchpad init [PROJECT-NAME]
```

--------------------------------

### Initialize Matic.js with Web3ClientPlugin and use()

Source: https://docs.polygon.technology/tools/matic-js/get-started

Imports and installs the Web3ClientPlugin from @maticnetwork/maticjs-web3 using use(). This is the setup shown for coding with Matic.js after installing the relevant libraries.

```javascript
import { use } from '@maticnetwork/maticjs'
import { Web3ClientPlugin } from '@maticnetwork/maticjs-web3'

// install web3 plugin
use(Web3ClientPlugin)
```

--------------------------------

### SDK Installation

Source: https://docs.polygon.technology/cross-chain/api-reference/overview

Install the @0xtrails/api SDK package and initialize the client with your base URL and access key.

```APIDOC
## SDK Installation

### Description
Install the SDK package and initialize the client.

### Installation
pnpm install @0xtrails/api

### Initialization
import { TrailsApi } from "@0xtrails/api";

const trails = new TrailsApi({
  baseUrl: "https://trails-api.sequence.app/rpc/Trails/",
  accessKey: process.env.TRAILS_ACCESS_KEY,
});
```

--------------------------------

### OMSWallet.init(publishableKey:)

Source: https://docs.polygon.technology/wallets/sdk/swift/api-reference

Initializes the OMSWallet SDK with a publishable key.

```APIDOC
## OMSWallet.init(publishableKey:)

### Description
Initializes the OMSWallet SDK with a publishable key.

### Method
Initializer

### Signature
public convenience init(publishableKey: String) throws

### Parameters
- **publishableKey** (String) - Required - The publishable key for the SDK.

### Throws
An error if initialization fails.
```

--------------------------------

### View production deployment help

Source: https://docs.polygon.technology/tools/dApp-development/launchpad/smart-contracts

Displays all available options for the production deployment command.

```bash
dapp-launchpad deploy -h
```

--------------------------------

### GET /health-check - Example Response

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/bridge-hub/api-reference

JSON response indicating the service is healthy.

```json
{
  "status": "success",
  "data": {
    "status": "success",
    "message": "All services are working correctly"
  }
}
```

--------------------------------

### Copy smart contracts environment file

Source: https://docs.polygon.technology/tools/dApp-development/launchpad/quickstart

Copies the .env.example file to .env in the smart-contracts directory. Set PRIVATE_KEY_DEPLOYER to a private key from a wallet you control; other variables are optional.

```bash
cd ../smart-contracts
cp .env.example .env
```

--------------------------------

### GET /transactions example request

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/bridge-hub/api-reference

Example curl command to query bridge transactions with status filter and limit. Returns JSON with transaction data and pagination cursor.

```bash
curl "https://bridge-hub.example.com/transactions?status=READY_TO_CLAIM&limit=2"
```

--------------------------------

### Read API: Get ERC20 balance

Source: https://docs.polygon.technology/tools/matic-js/api-architecture

Read methods do not publish anything on the blockchain and do not consume gas. This example gets the balance of an ERC20 token for a user address.

```javascript
const erc20 = posClient.erc20('<token address>');
const balance = await erc20.getBalance('<user address>')
```

--------------------------------

### Copy Parameter File Template

Source: https://docs.polygon.technology/chain-development/cdk/cdk-opgeth/devnet-deployment-guide

Create the configuration file by copying the provided example template.

```bash
cp ./tools/createSovereignGenesis/create-genesis-sovereign-params.json.example ./tools/createSovereignGenesis/create-genesis-sovereign-params.json
```

--------------------------------

### GET /health-check - Example Request

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/bridge-hub/api-reference

Curl command to check the service health status.

```bash
curl "https://bridge-hub.example.com/health-check"
```

--------------------------------

### Example Response for GET /claims

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/aggkit-bridge-service/api-reference

The JSON response structure returned when querying claim transactions.

```json
{
  "claims": [
    {
      "tx_hash": "0xa9fa5418144f7c8c1b78cd0e5560d6550411667ef937b554636a613f933b3d9f",
      "global_index": "0x000000000000000000000000000000000000000000000000000000000000002a",
      "amount": "1000000000000000000",
      "block_timestamp": 1695563145,
      "bridge_tx_hash": "0x8d1b60d0eaab6f609955bdd371e8004f47349cc809ff1bee81dc9d37237a031c"
    }
  ]
}
```

--------------------------------

### Install dependencies for Fetch client

Source: https://docs.polygon.technology/payment-services/agentic-payments/x402/guides/quickstart-buyers

Install the necessary x402 v2 packages and viem for signing when using the Fetch API.

```bash
bun install @x402/fetch @x402/core @x402/evm viem dotenv
```

--------------------------------

### GET /token-mappings - Example Request

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/bridge-hub/api-reference

Curl command to retrieve token address mappings between networks.

```bash
curl "https://bridge-hub.example.com/token-mappings"
```

--------------------------------

### Create an npm project

Source: https://docs.polygon.technology/tools/dApp-development/common-tools/hardhat

Initialize a new npm project in a dedicated directory.

```bash
mkdir hardhat-test
cd hardhat-test/
npm init
```

--------------------------------

### Install V2 packages for buyers and sellers

Source: https://docs.polygon.technology/payment-services/agentic-payments/x402/guides/migration-v1-to-v2

Use these commands to install the necessary V2 packages for both buyer and seller environments.

```bash
npm install @x402/axios @x402/core @x402/evm
# Sellers
npm install @x402/express @x402/core @x402/evm
```

--------------------------------

### GET /token-metadata - Example Request

Source: https://docs.polygon.technology/interoperability/agglayer/integrations/bridge-hub/api-reference

Curl command to retrieve token metadata including name, symbol, and decimals.

```bash
curl "https://bridge-hub.example.com/token-metadata"
```

--------------------------------

### Install the SDK

Source: https://docs.polygon.technology/wallets/sdk/typescript/quickstart

Install the @polygonlabs/oms-wallet package using pnpm.

```bash
pnpm add @polygonlabs/oms-wallet
```

--------------------------------

### x402-pay command examples

Source: https://docs.polygon.technology/payment-services/agentic-payments/cli/x402-pay

Shows two example invocations of polygon-agent x402-pay: a simple GET request and a POST request with method, body, and header flags. The command always settles USDC as part of the call; there is no --broadcast flag.

```bash
polygon-agent x402-pay --url https://api.example.com/v1/lookups/company
```

```bash
polygon-agent x402-pay \
  --url https://api.example.com/v1/inference \
  --method POST \
  --body '{"prompt":"hi"}' \
  --header "X-Trace-Id:abc"
```