### Setup development environment

Source: https://php-enqueue.github.io/contribution

Commands to install dependencies and initialize the development environment.

```bash
composer install
./bin/pre-commit -i
./bin/dev -b
```

--------------------------------

### Run Magento Setup Upgrade

Source: https://php-enqueue.github.io/magento2/quick_tour

Execute this command to ensure Magento2 recognizes the newly installed module.

```bash
php bin/magento setup:upgrade
```

--------------------------------

### Install enqueue/null via Composer

Source: https://php-enqueue.github.io/transport/null

Use Composer to install the enqueue/null package. This is the required setup step before using the NULL transport.

```bash
$ composer require enqueue/null

```

--------------------------------

### Install Thruway and start WAMP router

Source: https://php-enqueue.github.io/transport/wamp

Install the Thruway library and start the SimpleWsRouter example to run a WAMP router on 127.0.0.1 port 9090.

```bash
$ composer require voryx/thruway
$ php vendor/voryx/thruway/Examples/SimpleWsRouter.php

```

--------------------------------

### Install with php-redis extension

Source: https://php-enqueue.github.io/transport/redis

Install the required system extension and the Enqueue Redis package.

```bash
$ apt-get install php-redis
$ composer require enqueue/redis
```

--------------------------------

### Install enqueue/laravel-queue and transport

Source: https://php-enqueue.github.io/laravel/quick_tour

Install the required packages using Composer.

```bash
$ composer require enqueue/laravel-queue enqueue/fs
```

--------------------------------

### Install with predis library

Source: https://php-enqueue.github.io/transport/redis

Install the Enqueue Redis package and the predis library.

```bash
$ composer require enqueue/redis predis/predis:^1
```

--------------------------------

### Install EnqueueBundle via Composer

Source: https://php-enqueue.github.io/bundle/quick_tour

Install the bundle and the filesystem transport using Composer.

```bash
$ composer require enqueue/enqueue-bundle enqueue/fs
```

--------------------------------

### Install enqueue/amqp-lib via Composer

Source: https://php-enqueue.github.io/transport/amqp_lib

Install the enqueue/amqp-lib package using Composer.

```bash
$ composer require enqueue/amqp-lib

```

--------------------------------

### Install Enqueue simple client and AMQP extension

Source: https://php-enqueue.github.io/client/quick_tour

Composer command to install the enqueue/simple-client and enqueue/amqp-ext packages.

```bash
$ composer require enqueue/simple-client enqueue/amqp-ext

```

--------------------------------

### Install enqueue/simple-client

Source: https://php-enqueue.github.io/laravel/quick_tour

Install the simple client library to use the Enqueue Simple Client in your Laravel application.

```bash
$ composer require enqueue/simple-client
```

--------------------------------

### Install Enqueue DBAL

Source: https://php-enqueue.github.io/transport/dbal

Install the required package via Composer.

```bash
$ composer require enqueue/dbal
```

--------------------------------

### Install enqueue/gps package

Source: https://php-enqueue.github.io/transport/gps

Install the Google Cloud Pub/Sub transport library using Composer.

```shell
$ composer require enqueue/gps

```

--------------------------------

### Install async dispatcher and transport

Source: https://php-enqueue.github.io/async_event_dispatcher/quick_tour

Use Composer to install the required async dispatcher library and a supported transport, such as the filesystem transport.

```bash
$ composer require enqueue/async-event-dispatcher enqueue/fs
```

--------------------------------

### Run documentation locally with Docker

Source: https://php-enqueue.github.io/

Execute this command from the repository root directory to start a Jekyll server for the documentation. The site will be accessible at http://localhost:4000/.

```bash
docker run -p 4000:4000 --rm --volume="${PWD}/docs:/srv/jekyll" -it jekyll/jekyll jekyll serve --watch
```

--------------------------------

### Install Enqueue Filesystem package

Source: https://php-enqueue.github.io/transport/filesystem

Use Composer to install the required package for filesystem transport.

```bash
$ composer require enqueue/fs
```

--------------------------------

### Install Enqueue SNS-SQS

Source: https://php-enqueue.github.io/transport/snsqs

Install the required package via Composer.

```bash
$ composer require enqueue/snsqs
```

--------------------------------

### Install enqueue/dsn with Composer

Source: https://php-enqueue.github.io/dsn

Install the enqueue/dsn package version 0.9.x using Composer.

```bash
composer req enqueue/dsn 0.9.x

```

--------------------------------

### Install Enqueue SQS

Source: https://php-enqueue.github.io/transport/sqs

Use Composer to install the Enqueue SQS package.

```bash
$ composer require enqueue/sqs
```

--------------------------------

### Install enqueue/wamp via Composer

Source: https://php-enqueue.github.io/transport/wamp

Install the enqueue/wamp package using Composer.

```bash
$ composer require enqueue/wamp

```

--------------------------------

### Install Enqueue Module via Composer

Source: https://php-enqueue.github.io/magento2/quick_tour

Run these commands in the application root directory to install the necessary libraries.

```bash
composer require "enqueue/magento2-enqueue:*@dev" "enqueue/amqp-ext"
```

--------------------------------

### Install Enqueue Monitoring via Composer

Source: https://php-enqueue.github.io/monitoring

Use this command to install the Enqueue monitoring package.

```bash
composer req enqueue/monitoring:0.9.x-dev
```

--------------------------------

### Configure AMQP Interop Connection

Source: https://php-enqueue.github.io/laravel/queues

Example configuration for an AMQP connection using the interop driver.

```php
<?php

// config/queue.php

return [
    // uncomment to set it as default
    // 'default' => env('QUEUE_DRIVER', 'interop'),

    'connections' => [
        'interop' => [
            'driver' => 'interop',

            // connects to localhost
            'dsn' => 'amqp:', //

            // could be "rabbitmq_dlx", "rabbitmq_delay_plugin", instance of DelayStrategy interface or null
            // 'delay_strategy' => 'rabbitmq_dlx'
        ],
    ],
];
```

--------------------------------

### Install async-command via Composer

Source: https://php-enqueue.github.io/bundle/async_commands

Use this command to install the async-command package in your project.

```bash
$ composer require enqueue/async-command:0.9.x-dev
```

--------------------------------

### Install Kafka transport

Source: https://php-enqueue.github.io/transport/kafka

Use composer to install the required rdkafka package.

```bash
$ composer require enqueue/rdkafka
```

--------------------------------

### Install AMQP Bunny transport

Source: https://php-enqueue.github.io/transport/amqp_bunny

Use Composer to install the enqueue/amqp-bunny package.

```bash
$ composer require enqueue/amqp-bunny
```

--------------------------------

### Install enqueue/stomp via Composer

Source: https://php-enqueue.github.io/transport/stomp

Use Composer to install the enqueue/stomp package.

```bash
$ composer require enqueue/stomp

```

--------------------------------

### Install Magento Enqueue via Composer

Source: https://php-enqueue.github.io/magento/quick_tour

Run these commands in the application root directory to install the necessary composer plugin and the Enqueue library.

```bash
composer require "magento-hackathon/magento-composer-installer:~3.0"
composer require "enqueue/magento-enqueue:*@dev" "enqueue/amqp-ext"
```

--------------------------------

### Install AMQP transport via Composer

Source: https://php-enqueue.github.io/transport/amqp

Use Composer to install the enqueue/amqp-ext package. Ensure the AMQP extension version is at least 1.9.3.

```bash
$ composer require enqueue/amqp-ext
```

--------------------------------

### Consume messages via CLI with setup-broker

Source: https://php-enqueue.github.io/client/quick_tour

Command to consume messages using the enqueue:consume command with verbose output and automatic broker setup.

```bash
$ php bin/enqueue.php enqueue:consume -vvv --setup-broker

```

--------------------------------

### Run consume command from console

Source: https://php-enqueue.github.io/quick_tour

Starts the consumption process by running the app.php script with the 'consume' command.

```bash
$ app.php consume

```

--------------------------------

### Install Enqueue Monolog Handler dependencies

Source: https://php-enqueue.github.io/monolog/send-messages-to-mq

Install the required packages including monolog, the queue interop handler, and the filesystem transport via composer.

```bash
composer require enqueue/monolog-queue-handler monolog/monolog enqueue/fs
```

--------------------------------

### enqueue:transport:consume command help

Source: https://php-enqueue.github.io/bundle/cli_commands

Displays the help information and available options for the enqueue:transport:consume command, which is used to start a worker that consumes messages from a broker.

```bash
./bin/console enqueue:transport:consume --help
Usage:
  enqueue:transport:consume [options] [--] <processor> [<queues>]...

Arguments:
  processor                              A message processor.
  queues                                 A queue to consume from

Options:
      --message-limit=MESSAGE-LIMIT      Consume n messages and exit
      --time-limit=TIME-LIMIT            Consume messages during this time
      --memory-limit=MEMORY-LIMIT        Consume messages until process reaches this memory limit in MB
      --niceness=NICENESS                Set process niceness
      --receive-timeout=RECEIVE-TIMEOUT  The time in milliseconds queue consumer waits for a message.
      --logger[=LOGGER]                  A logger to be used. Could be "default", "null", "stdout". [default: "default"]
  -t, --transport[=TRANSPORT]            The transport to consume messages from. [default: "default"]
  -h, --help                             Display this help message
  -q, --quiet                            Do not output any message
  -V, --version                          Display this application version
      --ansi                             Force ANSI output
      --no-ansi                          Disable ANSI output
  -n, --no-interaction                   Do not ask any interactive question
  -e, --env=ENV                          The Environment name. [default: "test"]
      --no-debug                         Switches off debug mode.
  -v|vv|vvv, --verbose                   Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

Help:
  A worker that consumes message from a broker. To use this broker you have to explicitly set a queue to consume from and a message processor service
```

--------------------------------

### Consume messages with bindTopic and consume

Source: https://php-enqueue.github.io/client/quick_tour

Shows how to bind a topic to a callback that processes messages and returns Processor::ACK, then start consuming.

```php
<?php

use Interop\Queue\Message;
use Interop\Queue\Processor;

/** @var \Enqueue\SimpleClient\SimpleClient $client */

$client->bindTopic('a_bar_topic', function(Message $psrMessage) {
    // processing logic here

    return Processor::ACK;
});

$client->consume();

```

--------------------------------

### enqueue:setup-broker command help

Source: https://php-enqueue.github.io/bundle/cli_commands

Displays the help information for the enqueue:setup-broker command, which configures the broker by creating queues and topics.

```bash
./bin/console enqueue:setup-broker --help
Usage:
  enqueue:setup-broker [options]
  enq:sb

Options:
  -c, --client[=CLIENT]  The client to consume messages from. [default: "default"]
  -h, --help             Display this help message
  -q, --quiet            Do not output any message
  -V, --version          Display this application version
      --ansi             Force ANSI output
      --no-ansi            Disable ANSI output
  -n, --no-interaction   Do not ask any interactive question
  -e, --env=ENV          The Environment name. [default: "test"]
      --no-debug         Switches off debug mode.
  -v|vv|vvv, --verbose   Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

Help:
  Setup broker. Configure the broker, creates queues, topics and so on.
```

--------------------------------

### Configure Symfony bundle

Source: https://php-enqueue.github.io/transport/kafka

Provides examples for configuring the Enqueue transport in Symfony, including basic DSN setup and extended configuration with custom Kafka options.

```yaml
# app/config/config.yml

enqueue:
    default:
        transport: "rdkafka:"
        client: ~
```

```yaml
# app/config/config.yml

enqueue:
    default:
        transport:
            dsn: "rdkafka://"
            global:
                ### Make sure this is unique for each application / consumer group and does not change
                ### Otherwise, Kafka won't be able to track your last offset and will always start according to
                ### `auto.offset.reset` setting.
                ### See Kafka documentation regarding `group.id` property if you want to know more
                group.id: 'foo-app'
                metadata.broker.list: 'example.com:1000'
            topic:
                auto.offset.reset: beginning
            ### Commit async is true by default since version 0.9.9.
            ### It is suggested to set it to true in earlier versions since otherwise consumers become extremely slow,
            ### waiting for offset to be stored on Kafka before continuing.
            commit_async: true
        client: ~
```

--------------------------------

### Install Gearman transport

Source: https://php-enqueue.github.io/transport/gearman

Use composer to install the required package.

```bash
$ composer require enqueue/gearman
```

--------------------------------

### Configure async event dispatcher

Source: https://php-enqueue.github.io/async_event_dispatcher/quick_tour

Set up the connection, registry, and async listener in config.php to prepare the event dispatcher for asynchronous operations.

```php
<?php

// config.php

use Enqueue\AsyncEventDispatcher\AsyncListener;
use Enqueue\AsyncEventDispatcher\AsyncProcessor;
use Enqueue\AsyncEventDispatcher\PhpSerializerEventTransformer;
use Enqueue\AsyncEventDispatcher\AsyncEventDispatcher;
use Enqueue\AsyncEventDispatcher\SimpleRegistry;
use Enqueue\Fs\FsConnectionFactory;
use Symfony\Component\EventDispatcher\EventDispatcher;

require_once __DIR__.'/vendor/autoload.php';

// it could be any other queue-interop/queue-interop compatible context.
$context = (new FsConnectionFactory('file://'.__DIR__.'/queues'))->createContext();
$eventQueue = $context->createQueue('symfony_events');

$registry = new SimpleRegistry(
    ['the_event' => 'default'],
    ['default' => new PhpSerializerEventTransformer($context)]
);

$asyncListener = new AsyncListener($context, $registry, $eventQueue);

$dispatcher = new EventDispatcher();

// the listener sends even as a message through MQ
$dispatcher->addListener('the_event', $asyncListener);

$asyncDispatcher = new AsyncEventDispatcher($dispatcher, $asyncListener);

// the listener is executed on consumer side.
$asyncDispatcher->addListener('the_event', function() {
});

$asyncProcessor = new AsyncProcessor($registry, $asyncDispatcher);
```

--------------------------------

### Send and consume command messages with SimpleClient and reply support

Source: https://php-enqueue.github.io/quick_tour

Binds command handlers, sets up the broker, sends commands, and optionally receives replies. Shows how to send a command with reply expectation and consume with ReplyExtension. Includes commented composer require lines for amqp-ext, amqp-bunny, amqp-lib, and fs.

```php
<?php
use Enqueue\SimpleClient\SimpleClient;
use Interop\Queue\Message;
use Interop\Queue\Context;
use Enqueue\Client\Config;
use Enqueue\Consumption\Extension\ReplyExtension;
use Enqueue\Consumption\Result;

// composer require enqueue/amqp-ext # or enqueue/amqp-bunny or enqueue/amqp-lib
$client = new SimpleClient('amqp:');

// composer require enqueue/fs
//$client = new SimpleClient('file://foo/bar');

$client->bindCommand('bar_command', function(Message $message) {
    // your bar command processor logic here
});

$client->bindCommand('baz_reply_command', function(Message $message, Context $context) {
    // your baz reply command processor logic here

    return Result::reply($context->createMessage('theReplyBody'));
});

$client->setupBroker();

// It is sent to one consumer.
$client->sendCommand('bar_command', 'aMessageData');

// It is possible to get reply
$promise = $client->sendCommand('bar_command', 'aMessageData', true);

// you can send several commands and only after start getting replies.

$replyMessage = $promise->receive(2000); // 2 sec

// this is a blocking call, it'll consume message until it is interrupted
$client->consume([new ReplyExtension()]);

```

--------------------------------

### Create AMQP context

Source: https://php-enqueue.github.io/transport/amqp

Demonstrates various ways to initialize the AmqpConnectionFactory, including default settings, DSN strings, and SSL configurations.

```php
<?php
use Enqueue\AmqpExt\AmqpConnectionFactory;

// connects to localhost
$connectionFactory = new AmqpConnectionFactory();

// same as above
$factory = new AmqpConnectionFactory('amqp:');

// same as above
$factory = new AmqpConnectionFactory([]);

// connect to AMQP broker at example.com
$factory = new AmqpConnectionFactory([
    'host' => 'example.com',
    'port' => 1000,
    'vhost' => '/',
    'user' => 'user',
    'pass' => 'pass',
    'persisted' => false,
]);

// same as above but given as DSN string
$factory = new AmqpConnectionFactory('amqp://user:pass@example.com:10000/%2f');

// SSL or secure connection
$factory = new AmqpConnectionFactory([
    'dsn' => 'amqps:',
    'ssl_cacert' => '/path/to/cacert.pem',
    'ssl_cert' => '/path/to/cert.pem',
    'ssl_key' => '/path/to/key.pem',
]);

$context = $factory->createContext();

// if you have enqueue/enqueue library installed you can use a factory to build context from DSN
$context = (new \Enqueue\ConnectionFactoryFactory())->create('amqp:')->createContext();
$context = (new \Enqueue\ConnectionFactoryFactory())->create('amqp+ext:')->createContext();
```

--------------------------------

### Install Enqueue MongoDB transport

Source: https://php-enqueue.github.io/transport/mongodb

Use Composer to install the MongoDB transport package.

```bash
$ composer require enqueue/mongodb
```

--------------------------------

### Configure config/enqueue.php

Source: https://php-enqueue.github.io/laravel/quick_tour

Create the configuration file to define the transport and client settings.

```php
<?php

// config/enqueue.php

return [
    'client' => [
        'transport' => [
            'default' => 'file://'.realpath(__DIR__.'/../storage/enqueue')
        ],
        'client' => [
              'router_topic'             => 'default',
              'router_queue'             => 'default',
              'default_queue'  => 'default',
        ],
    ],
];
```

--------------------------------

### Install Pheanstalk transport

Source: https://php-enqueue.github.io/transport/pheanstalk

Use Composer to install the required package for the Pheanstalk transport.

```bash
$ composer require enqueue/pheanstalk
```

--------------------------------

### Create AMQP context

Source: https://php-enqueue.github.io/transport/amqp_bunny

Demonstrates various ways to initialize the AmqpConnectionFactory and create a context, including local connections, custom configurations, and DSN strings.

```php
<?php
use Enqueue\AmqpBunny\AmqpConnectionFactory;

// connects to localhost
$factory = new AmqpConnectionFactory();

// same as above
$factory = new AmqpConnectionFactory('amqp:');

// same as above
$factory = new AmqpConnectionFactory([]);

// connect to AMQP broker at example.com
$factory = new AmqpConnectionFactory([
    'host' => 'example.com',
    'port' => 1000,
    'vhost' => '/',
    'user' => 'user',
    'pass' => 'pass',
    'persisted' => false,
]);

// same as above but given as DSN string
$factory = new AmqpConnectionFactory('amqp://user:pass@example.com:10000/%2f');

$context = $factory->createContext();

// if you have enqueue/enqueue library installed you can use a factory to build context from DSN
$context = (new \Enqueue\ConnectionFactoryFactory())->create('amqp:')->createContext();
$context = (new \Enqueue\ConnectionFactoryFactory())->create('amqp+bunny:')->createContext();
```

--------------------------------

### Configure SimpleClient with AMQP transport

Source: https://php-enqueue.github.io/client/quick_tour

PHP code showing how to instantiate SimpleClient with the 'amqp:' DSN. Requires the Composer autoloader.

```php
<?php
use Enqueue\SimpleClient\SimpleClient;

include __DIR__.'/vendor/autoload.php';

$client = new SimpleClient('amqp:');

```

--------------------------------

### Install Datadog package

Source: https://php-enqueue.github.io/monitoring

Install the required Datadog PHP stats package via Composer.

```bash
composer req datadog/php-datadogstatsd:^1.3
```

--------------------------------

### Install InfluxDB package

Source: https://php-enqueue.github.io/monitoring

Install the required InfluxDB PHP client package via Composer.

```bash
composer req influxdb/influxdb-php:^1.14
```

--------------------------------

### Create STOMP context with StompConnectionFactory

Source: https://php-enqueue.github.io/transport/stomp

Shows various ways to instantiate StompConnectionFactory and create a context, including default localhost, DSN strings, array configuration, and using ConnectionFactoryFactory.

```php
<?php
use Enqueue\Stomp\StompConnectionFactory;

// connects to localhost
$factory = new StompConnectionFactory();

// same as above
$factory = new StompConnectionFactory('stomp:');

// same as above
$factory = new StompConnectionFactory([]);

// connect via stomp to RabbitMQ (default) - the topic names are prefixed with /exchange
$factory = new StompConnectionFactory('stomp+rabbitmq:');

// connect via stomp to ActiveMQ - the topic names are prefixed with /topic
$factory = new StompConnectionFactory('stomp+activemq:');

// connect to stomp broker at example.com port 1000 using
$factory = new StompConnectionFactory([
    'host' => 'example.com',
    'port' => 1000,
    'login' => 'theLogin',
]);

// same as above but given as DSN string
$factory = new StompConnectionFactory('stomp://example.com:1000?login=theLogin');

$context = $factory->createContext();

// if you have enqueue/enqueue library installed you can use a factory to build context from DSN
$context = (new \Enqueue\ConnectionFactoryFactory())->create('stomp:')->createContext();

```

--------------------------------

### Create RdKafkaConnectionFactory context

Source: https://php-enqueue.github.io/transport/kafka

Demonstrates various ways to initialize the RdKafkaConnectionFactory, including connecting to localhost, using DSN strings, and passing custom global or topic configuration options.

```php
<?php
use Enqueue\RdKafka\RdKafkaConnectionFactory;

// connects to localhost:9092
$connectionFactory = new RdKafkaConnectionFactory();

// same as above
$connectionFactory = new RdKafkaConnectionFactory('kafka:');

// same as above
$connectionFactory = new RdKafkaConnectionFactory([]);

// connect to Kafka broker at example.com:1000 plus custom options
$connectionFactory = new RdKafkaConnectionFactory([
    'global' => [
        'group.id' => uniqid('', true),
        'metadata.broker.list' => 'example.com:1000',
        'enable.auto.commit' => 'false',
    ],
    'topic' => [
        'auto.offset.reset' => 'beginning',
    ],
]);

$context = $connectionFactory->createContext();

// if you have enqueue/enqueue library installed you can use a factory to build context from DSN
$context = (new \Enqueue\ConnectionFactoryFactory())->create('kafka:')->createContext();
```

--------------------------------

### Install WAMP transport packages

Source: https://php-enqueue.github.io/monitoring

Install the required Thruway packages via Composer to enable WAMP storage.

```bash
composer req thruway/pawl-transport:^0.5.0 thruway/client:^0.5.0
```

--------------------------------

### Declare and bind topics and queues

Source: https://php-enqueue.github.io/transport/snsqs

Create topics and queues on the broker and bind them to enable message routing.

```php
<?php
/** @var \Enqueue\SnsQs\SnsQsContext $context */

$inTopic = $context->createTopic('in');
$context->declareTopic($inTopic);

$out1Queue = $context->createQueue('out1');
$context->declareQueue($out1Queue);

$out2Queue = $context->createQueue('out2');
$context->declareQueue($out2Queue);

$context->bind($inTopic, $out1Queue);
$context->bind($inTopic, $out2Queue);

// to remove topic/queue use deleteTopic/deleteQueue method
//$context->deleteTopic($inTopic);
//$context->deleteQueue($out1Queue);
//$context->unbind(inTopic, $out1Queue);
```

--------------------------------

### Create CLI application with Enqueue commands

Source: https://php-enqueue.github.io/client/quick_tour

PHP script (bin/enqueue.php) that sets up a Symfony Console application with commands for setup-broker, routes, produce, and consume.

```php
#!/usr/bin/env php
<?php

// bin/enqueue.php

use Enqueue\Symfony\Client\SimpleConsumeCommand;
use Enqueue\Symfony\Client\SimpleProduceCommand;
use Enqueue\Symfony\Client\SimpleRoutesCommand;
use Enqueue\Symfony\Client\SimpleSetupBrokerCommand;
use Enqueue\Symfony\Client\SetupBrokerCommand;
use Symfony\Component\Console\Application;

/** @var \Enqueue\SimpleClient\SimpleClient $client */

$application = new Application();
$application->add(new SimpleSetupBrokerCommand($client->getDriver()));
$application->add(new SimpleRoutesCommand($client->getDriver()));
$application->add(new SimpleProduceCommand($client->getProducer()));
$application->add(new SimpleConsumeCommand(
    $client->getQueueConsumer(),
    $client->getDriver(),
    $client->getDelegateProcessor()
));

$application->run();

```

--------------------------------

### Example Controller Action for Profiling

Source: https://php-enqueue.github.io/bundle/debugging

An example controller action demonstrating how to use the producer to send events, which can then be inspected in the Symfony profiler.

```php
<?php

use Symfonyundle\FrameworkBundle\Controller\Controller;
use Symfony\Component\HttpFoundation\Request;
use Enqueue\Client\Message;
use Enqueue\Client\ProducerInterface;

class DefaultController extends Controller
    /**
     * @Route("/", name="homepage")
     */
    public function indexAction(Request $request)
    {
        /** @var ProducerInterface $producer */
        $producer = $this->get('enqueue.producer');

        $producer->sendEvent('foo_topic', 'Hello world');

        $producer->sendEvent('bar_topic', ['bar' => 'val']);

        $message = new Message();
        $message->setBody('baz');
        $producer->sendEvent('baz_topic', $message);

        // ...
    }
```

--------------------------------

### enqueue:routes command help

Source: https://php-enqueue.github.io/bundle/cli_commands

Displays the help information and available options for the enqueue:routes command, which lists all registered routes.

```bash
./bin/console enqueue:routes --help
Usage:
  enqueue:routes [options]
  debug:enqueue:routes

Options:
      --show-route-options  Adds ability to hide options.
  -c, --client[=CLIENT]     The client to consume messages from. [default: "default"]
  -h, --help                Display this help message
  -q, --quiet               Do not output any message
  -V, --version             Display this application version
      --ansi                Force ANSI output
      --no-ansi             Disable ANSI output
  -n, --no-interaction      Do not ask any interactive question
  -e, --env=ENV             The Environment name. [default: "test"]
      --no-debug            Switches off debug mode.
  -v|vv|vvv, --verbose      Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

Help:
  A command lists all registered routes.
```

--------------------------------

### Create context with predis and custom options

Source: https://php-enqueue.github.io/transport/redis

Initialize the Redis context with custom predis options for advanced control.

```php
<?php
use Enqueue\Redis\RedisConnectionFactory;
use Enqueue\Redis\PRedis;

$config = [
    'host' => 'localhost',
    'port' => 6379,
    'predis_options' => [
        'prefix'  => 'ns:'
    ]
];

$redis = new PRedis($config);

$factory = new RedisConnectionFactory($redis);
```

--------------------------------

### Broken pipe or closed connection error

Source: https://php-enqueue.github.io/transport/amqp_lib

Example of the exception thrown when the connection is lost.

```text
PHP Fatal error: Uncaught exception 'PhpAmqpLib\Exception\AMQPRuntimeException' with message 'Broken pipe or closed connection' in /some/path/vendor/php-amqplib/php-amqplib/PhpAmqpLib/Wire/IO/StreamIO.php:190
```

--------------------------------

### Run Queue Listener

Source: https://php-enqueue.github.io/yii/amqp_driver

Command to start the daemon process that listens for and executes queued tasks.

```bash
yii queue/listen
```

--------------------------------

### Display help for enqueue:consume

Source: https://php-enqueue.github.io/bundle/cli_commands

Displays the usage, arguments, and options for the enqueue:consume command.

```bash
./bin/console enqueue:consume --help
Usage:
  enqueue:consume [options] [--] [<client-queue-names>]...
  enq:c

Arguments:
  client-queue-names                     Queues to consume messages from

Options:
      --message-limit=MESSAGE-LIMIT      Consume n messages and exit
      --time-limit=TIME-LIMIT            Consume messages during this time
      --memory-limit=MEMORY-LIMIT        Consume messages until process reaches this memory limit in MB
      --niceness=NICENESS                Set process niceness
      --setup-broker                     Creates queues, topics, exchanges, binding etc on broker side.
      --receive-timeout=RECEIVE-TIMEOUT  The time in milliseconds queue consumer waits for a message.
      --logger[=LOGGER]                  A logger to be used. Could be "default", "null", "stdout". [default: "default"]
      --skip[=SKIP]                      Queues to skip consumption of messages from (multiple values allowed)
  -c, --client[=CLIENT]                  The client to consume messages from. [default: "default"]
  -h, --help                             Display this help message
  -q, --quiet                            Do not output any message
  -V, --version                          Display this application version
      --ansi                             Force ANSI output
      --no-ansi                          Disable ANSI output
  -n, --no-interaction                   Do not ask any interactive question
  -e, --env=ENV                          The Environment name. [default: "test"]
      --no-debug                         Switches off debug mode.
  -v|vv|vvv, --verbose                   Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

Help:
  A client's worker that processes messages. By default it connects to default queue. It select an appropriate message processor based on a message headers
```

--------------------------------

### Run Message Consume Command

Source: https://php-enqueue.github.io/magento/quick_tour

Execute the shell script to start consuming messages from the broker.

```bash
$ php shell/enqueue.php enqueue:consume -vvv --setup-broker
```

--------------------------------

### enqueue:produce command help

Source: https://php-enqueue.github.io/bundle/cli_commands

Displays the help information for the enqueue:produce command, which is used to send an event to a topic.

```bash
./bin/console enqueue:produce --help
Usage:
  enqueue:produce [options] [--] <message>

Arguments:
  message                  A message

Options:
  -c, --client[=CLIENT]    The client to send messages to. [default: "default"]
      --topic[=TOPIC]      The topic to send a message to
      --command[=COMMAND]  The command to send a message to
  -h, --help               Display this help message
  -q, --quiet              Do not output any message
  -V, --version            Display this application version
      --ansi               Force ANSI output
      --no-ansi            Disable ANSI output
  -n, --no-interaction     Do not ask any interactive question
  -e, --env=ENV            The Environment name. [default: "test"]
      --no-debug           Switches off debug mode.
  -v|vv|vvv, --verbose     Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

Help:
  Sends an event to the topic
```