### Simple Makefile Example

Source: https://makefiletutorial.com/

This is the most basic Makefile. It defines a single target 'hello' that echoes 'Hello, World'. Ensure commands are indented with TABs.

```makefile
hello:
	echo "Hello, World"
```

--------------------------------

### Build C Program Using Implicit Rules

Source: https://makefiletutorial.com/

This example demonstrates how Make can compile and link a C program using its implicit rules. It sets the CC and CFLAGS variables and defines a target 'blah' that depends on 'blah.o', which Make automatically compiles from 'blah.c'.

```makefile
CC = gcc # Flag for implicit rules
CFLAGS = -g # Flag for implicit rules. Turn on debug info

# Implicit rule #1: blah is built via the C linker implicit rule
# Implicit rule #2: blah.o is built via the C compilation implicit rule, because blah.c exists
blah: blah.o

blah.c:
	echo "int main() { return 0; }" > blah.c

clean:
	rm -f blah*
```

--------------------------------

### Makefile with Always-Running Targets

Source: https://makefiletutorial.com/

This example illustrates a Makefile where targets will always execute because a dependency is never created. It shows how Make handles missing dependencies.

```makefile
some_file: other_file
	echo "This will always run, and runs second"
	touch some_file

other_file:
	echo "This will always run, and runs first"
```

--------------------------------

### Set Default Shell to Bash

Source: https://makefiletutorial.com/

Change the default shell for executing commands by setting the SHELL variable. This example sets it to `/bin/bash`.

```makefile
SHELL=/bin/bash

cool:
	echo "Hello from bash"
```

--------------------------------

### Recursive vs. Simply Expanded Variables in Make

Source: https://makefiletutorial.com/

Understand the difference between recursive (`=`) and simply expanded (`:=`) variables. Recursive variables are evaluated when used, while simply expanded variables are evaluated when defined. This example shows how a variable defined later affects a recursive variable but not a simply expanded one.

```makefile
# Recursive variable. This will print "later" below
one = one ${later_variable}
# Simply expanded variable. This will not print "later" below
two := two ${later_variable}

later_variable = later

all:
	echo $(one)
	echo $(two)
```

--------------------------------

### Build a C Program with Makefile

Source: https://makefiletutorial.com/

This Makefile defines targets for compiling a C program. It demonstrates how Make selects the default target and resolves dependencies step-by-step.

```makefile
blah: blah.o
	cc blah.o -o blah # Runs third

blah.o: blah.c
	cc -c blah.c -o blah.o # Runs second

# Typically blah.c would already exist, but I want to limit any additional required files
blah.c:
	echo "int main() { return 0; }" > blah.c # Runs first
```

--------------------------------

### Basic Hello World Target

Source: https://makefiletutorial.com/

A simple Makefile target that prints 'Hello, World'. This target has no prerequisites and will execute its commands if the target file does not exist.

```makefile
hello:
	echo "Hello, World"
	echo "This line will print if the file hello does not exist."
```

--------------------------------

### Defining and Calling Custom Functions with call

Source: https://makefiletutorial.com/

Shows how to define a custom function by assigning a string with parameter placeholders (`$(0)`, `$(1)`, etc.) to a variable. The `call` function is then used to invoke this custom function with specific arguments.

```makefile
sweet_new_fn = Variable Name: $(0) First: $(1) Second: $(2) Empty Variable: $(3) 

all:
	# Outputs "Variable Name: sweet_new_fn First: go Second: tigers Empty Variable:"
	@echo $(call sweet_new_fn, go, tigers)

```

--------------------------------

### Efficient Compilation with Static Pattern Rules in Makefile

Source: https://makefiletutorial.com/

This demonstrates the efficient way to compile .c files into .o files using a static pattern rule. It defines a single rule that applies to all objects in the 'objects' list.

```makefile
objects = foo.o bar.o all.o
all: $(objects)
	$(CC) $^ -o all

# Syntax - targets ...: target-pattern: prereq-patterns ...
# In the case of the first target, foo.o, the target-pattern matches foo.o and sets the "stem" to be "foo".
# It then replaces the '%' in prereq-patterns with that stem
$(objects): %.o: %.c
	$(CC) -c $^ -o $@

all.c:
	echo "int main() { return 0; }" > all.c

# Note: all.c does not use this rule because Make prioritizes more specific matches when there is more than one match.
%.c:
	touch $@

clean:
	rm -f *.c *.o all
```

--------------------------------

### Makefile Rule Syntax

Source: https://makefiletutorial.com/

Illustrates the general syntax of a Makefile rule, including targets, prerequisites, and commands. Commands must be indented with a TAB character.

```makefile
targets: prerequisites
	command
	command
	command
```

--------------------------------

### Manual Compilation Rules in Makefile

Source: https://makefiletutorial.com/

This shows the manual way to compile .c files into .o files without using static pattern rules. Each object file requires its own explicit rule.

```makefile
objects = foo.o bar.o all.o
all: $(objects)
	$(CC) $^ -o all

foo.o: foo.c
	$(CC) -c foo.c -o foo.o

bar.o: bar.c
	$(CC) -c bar.c -o bar.o

all.o: all.c
	$(CC) -c all.c -o all.o

all.c:
	echo "int main() { return 0; }" > all.c

# Note: all.c does not use this rule because Make prioritizes more specific matches when there is more than one match.
%.c:
	touch $@

clean:
	rm -f *.c *.o all
```

--------------------------------

### Static Pattern Rules with Filters in Makefile

Source: https://makefiletutorial.com/

Demonstrates using the `filter` function within static pattern rules to match specific file extensions like .o and .result. Ensure `PHONY` is declared for targets like 'all' to prevent conflicts with implicit rules.

```makefile
obj_files = foo.result bar.o lose.o
src_files = foo.raw bar.c lose.c

all: $(obj_files)
# Note: PHONY is important here. Without it, implicit rules will try to build the executable "all", since the prereqs are ".o" files.
.PHONY: all 

# Ex 1: .o files depend on .c files. Though we don't actually make the .o file.
$(filter %.o,$(obj_files)): %.o: %.c
		echo "target: $@ prereq: $<"

# Ex 2: .result files depend on .raw files. Though we don't actually make the .result file.
$(filter %.result,$(obj_files)): %.result: %.raw
		echo "target: $@ prereq: $<"

%.c %.raw:
	touch $@

clean:
	rm -f $(src_files)
```

--------------------------------

### Utilize Automatic Variables in Makefile

Source: https://makefiletutorial.com/

Demonstrates the use of automatic variables: $@ (target name), $? (newer prerequisites), $^ (all prerequisites), and $< (first prerequisite). Ensure prerequisites exist or are created before use.

```makefile
hey: one two
	# Outputs "hey", since this is the target name
	echo $@

	# Outputs all prerequisites newer than the target
	echo $?

	# Outputs all prerequisites
	echo $^

	# Outputs the first prerequisite
	echo $< 

	touch hey

one:
	touch one

two:
	touch two

clean:
	rm -f hey one two

```

--------------------------------

### Pattern Rule for Creating Empty .c Files in Makefile

Source: https://makefiletutorial.com/

A simple pattern rule that creates empty .c files when they are needed as prerequisites. It uses `touch $@` to create the target file, where '$@' represents the target filename.

```makefile
%.c:
	   touch $@

```

--------------------------------

### C Source File

Source: https://makefiletutorial.com/

A minimal C source file with a main function that returns 0.

```c
// blah.c
int main() { return 0; }
```

--------------------------------

### String Substitution with patsubst, Shorthand, and Suffix Replacement

Source: https://makefiletutorial.com/

Shows multiple ways to perform string substitution: `patsubst` with a wildcard, its shorthand `$(foo:%.o=%.c)`, and the suffix-only shorthand `$(foo:.o=.c)`. All achieve similar results for this pattern.

```makefile
foo := a.o b.o l.a c.o
one := $(patsubst %.o,%.c,$(foo))
# This is a shorthand for the above
two := $(foo:%.o=%.c)
# This is the suffix-only shorthand, and is also equivalent to the above.
three := $(foo:.o=.c)

all:
	echo $(one)
	echo $(two)
	echo $(three)

```

--------------------------------

### Conditional Logic with the if Function

Source: https://makefiletutorial.com/

Demonstrates the `if` function, which executes the second argument if the first argument is non-empty, and the third argument otherwise. It shows both a non-empty and an empty condition.

```makefile
foo := $(if this-is-not-empty,then!,else!)
empty :=
bar := $(if $(empty),then!,else!)

all:
	@echo $(foo)
	@echo $(bar)

```

--------------------------------

### Makefile: Conditional if/else

Source: https://makefiletutorial.com/

Use `ifeq` and `else` to conditionally execute targets based on variable equality. Ensure the variable is defined before use.

```makefile
foo = ok

all:
ifeq ($(foo), ok)
	echo "foo equals ok"
else
	echo "nope"
endif
```

--------------------------------

### Define Default 'all' Target in Makefile

Source: https://makefiletutorial.com/

Use an 'all' target as the first rule to ensure it runs by default when 'make' is called without specifying a target. This is useful for building multiple components.

```makefile
all: one two three

one:
	touch one
two:
	touch two
three:
	touch three

clean:
	rm -f one two three

```

--------------------------------

### Pattern Rule for Compiling .c to .o Files in Makefile

Source: https://makefiletutorial.com/

Defines a general pattern rule to compile any .c file into a corresponding .o file using the CC compiler, CFLAGS, and CPPFLAGS variables. The '%' wildcard matches the stem for both target and prerequisite.

```makefile
%.o : %.c
		$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@

```

--------------------------------

### vpath Directive for Prerequisite Search Paths

Source: https://makefiletutorial.com/

The `vpath` directive specifies directories where Make should search for prerequisites matching a given pattern. The `%` wildcard can be used in the pattern. This allows targets to be defined without explicit paths to their prerequisites.

```makefile
vpath %.h ../headers ../other-directory

# Note: vpath allows blah.h to be found even though blah.h is never in the current directory
some_binary: ../headers blah.h
	touch some_binary

../headers:
	mkdir ../headers

# We call the target blah.h instead of ../headers/blah.h, because that's the prereq that some_binary is looking for
# Typically, blah.h would already exist and you wouldn't need this.
blah.h:
	touch ../headers/blah.h

clean:
	rm -rf ../headers
	rm -f some_binary
```

--------------------------------

### Replacing Spaces with Commas using subst

Source: https://makefiletutorial.com/

Demonstrates replacing spaces with commas using the `subst` function. Note that spaces in arguments are significant and can be part of the search or replacement string.

```makefile
comma := ,
empty:=
space := $(empty) $(empty)
foo := a b c
bar := $(subst $(space),$(comma),$(foo))

all: 
	@echo $(bar)

```

--------------------------------

### Multiline Commands in Make

Source: https://makefiletutorial.com/

Use a backslash (`\`) at the end of a line to continue a command onto the next line. This is helpful for commands that are too long to fit comfortably on a single line.

```makefile
some_file:
	echo This line is too long, so \
		it is broken up into multiple lines
```

--------------------------------

### C File Compilation with Prerequisite

Source: https://makefiletutorial.com/

An improved Makefile target for compiling a C file. It includes 'blah.c' as a prerequisite, ensuring that the 'blah' executable is recompiled only if 'blah.c' has a newer timestamp.

```makefile
blah: blah.c
	cc blah.c -o blah
```

--------------------------------

### Pattern-Specific Variables in Make

Source: https://makefiletutorial.com/

Variables can be set for targets that match a specific pattern (e.g., `%.c`). This enables applying settings to a group of related files.

```makefile
%.c: one = cool

blah.c:
	echo one is defined: $(one)

other:
	echo one is nothing: $(one)
```

--------------------------------

### String Substitution with Extra Spaces

Source: https://makefiletutorial.com/

Illustrates how extra spaces in `subst` arguments can introduce unwanted spaces in the output. This highlights the importance of precise argument formatting.

```makefile
comma := ,
empty:=
space := $(empty) $(empty)
foo := a b c
bar := $(subst $(space), $(comma) , $(foo)) # Watch out!

all: 
	# Output is ", a , b , c". Notice the spaces introduced
	@echo $(bar)

```

--------------------------------

### Include Makefiles Directive

Source: https://makefiletutorial.com/

The `include` directive allows Make to read and incorporate directives from other makefiles. This is useful for modularizing makefiles or including auto-generated ones.

```makefile
include filenames...
```

--------------------------------

### Export All Variables Automatically

Source: https://makefiletutorial.com/

Use the `.EXPORT_ALL_VARIABLES:` special target to automatically export all Make variables to the environment for sub-make processes. This is an alternative to explicitly exporting each variable with `export`.

```makefile
.EXPORT_ALL_VARIABLES:
new_contents = "hello:\n\techo \$\$(cooly)"

cooly = "The subdirectory can see me!"
# This would nullify the line above: unexport cooly

all:
	mkdir -p subdir
	printf $(new_contents) | sed -e 's/^ //' > subdir/makefile
	@echo "---MAKEFILE CONTENTS---"
	@cd subdir && cat makefile
	@echo "---END MAKEFILE CONTENTS---"
	cd subdir && $(MAKE)

clean:
	rm -rf subdir

```

--------------------------------

### Automated C/C++ Project Makefile

Source: https://makefiletutorial.com/

This Makefile automatically finds C/C++ source files, determines dependencies using GCC flags, and compiles the project. It creates a build directory and handles header file inclusion.

```makefile
# Thanks to Job Vranish (https://spin.atomicobject.com/2016/08/26/makefile-c-projects/)
TARGET_EXEC := final_program

BUILD_DIR := ./build
SRC_DIRS := ./src

# Find all the C and C++ files we want to compile
# Note the single quotes around the * expressions. The shell will incorrectly expand these otherwise, but we want to send the * directly to the find command.
SRCS := $(shell find $(SRC_DIRS) -name '*.cpp' -or -name '*.c' -or -name '*.s')

# Prepends BUILD_DIR and appends .o to every src file
# As an example, ./your_dir/hello.cpp turns into ./build/./your_dir/hello.cpp.o
OBJS := $(SRCS:%=$(BUILD_DIR)/%.o)

# String substitution (suffix version without %).
# As an example, ./build/hello.cpp.o turns into ./build/hello.cpp.d
DEPS := $(OBJS:.o=.d)

# Every folder in ./src will need to be passed to GCC so that it can find header files
INC_DIRS := $(shell find $(SRC_DIRS) -type d)
# Add a prefix to INC_DIRS. So moduleA would become -ImoduleA. GCC understands this -I flag
INC_FLAGS := $(addprefix -I,$(INC_DIRS))

# The -MMD and -MP flags together generate Makefiles for us!
# These files will have .d instead of .o as the output.
CPPFLAGS := $(INC_FLAGS) -MMD -MP

# The final build step.
$(BUILD_DIR)/$(TARGET_EXEC): $(OBJS)
	$(CXX) $(OBJS) -o $@ $(LDFLAGS)

# Build step for C source
$(BUILD_DIR)/%.c.o: %.c
	mkdir -p $(dir $@)
	$(CC) $(CPPFLAGS) $(CFLAGS) -c $< -o $@

# Build step for C++ source
$(BUILD_DIR)/%.cpp.o: %.cpp
	mkdir -p $(dir $@)
	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $< -o $@


.PHONY: clean
clean:
	rm -r $(BUILD_DIR)

# Include the .d makefiles. The - at the front suppresses the errors of missing
# Makefiles. Initially, all the .d files will be missing, and we don't want those
# errors to show up.
-include $(DEPS)

```

--------------------------------

### Iterating with the foreach Function

Source: https://makefiletutorial.com/

Appends an exclamation mark to each word in a space-separated list using the `foreach` function. The first argument is the variable name for each item, the second is the list, and the third is the text to expand.

```makefile
foo := who are you
# For each "word" in foo, output that same word with an exclamation after
bar := $(foreach wrd,$(foo),$(wrd)!)

all:
	# Output is "who! are! you!"
	@echo $(bar)

```

--------------------------------

### Reference variables using $() or ${}

Source: https://makefiletutorial.com/

Variables can be referenced using either the `$(VAR)` or `${VAR}` syntax. The `$VAR` syntax is discouraged.

```makefile
x := dude

all:
	echo $(x)
	echo ${x}

	# Bad practice, but works
	echo $x 
```

--------------------------------

### Use variables in Makefile targets

Source: https://makefiletutorial.com/

Define and reference variables using `:=` or `=`. Variables are strings and can be used to manage lists of files or other dynamic values.

```makefile
files := file1 file2
some_file: $(files)
	echo "Look at this variable: " $(files)
	touch some_file

file1:
	touch file1
file2:
	touch file2

clean:
	rm -f file1 file2 some_file
```

--------------------------------

### Define a 'clean' target

Source: https://makefiletutorial.com/

Use this target to remove output files generated by other targets. It's not a special keyword and must be explicitly called with `make clean`.

```makefile
some_file:
	touch some_file

clean:
	rm -f some_file
```

--------------------------------

### Makefile: Check MAKEFLAGS with findstring

Source: https://makefiletutorial.com/

Inspect `$(MAKEFLAGS)` using `findstring` to conditionally execute targets based on passed make flags. Run with `make -i` to trigger the echo statement.

```makefile
all:
# Search for the "-i" flag. MAKEFLAGS is just a list of single characters, one per flag. So look for "i" in this case.
ifneq (,$(findstring i, $(MAKEFLAGS)))
	echo "i was passed to MAKEFLAGS"
endif
```

--------------------------------

### Recursive Make with $(MAKE)

Source: https://makefiletutorial.com/

Use the special `$(MAKE)` variable instead of `make` for recursive calls to ensure Make flags are passed correctly and the sub-make is not affected by flags of the parent `make` process.

```makefile
new_contents = "hello:\n\ttouch inside_file"
all:
	mkdir -p subdir
	printf $(new_contents) | sed -e 's/^ //' > subdir/makefile
	cd subdir && $(MAKE)

clean:
	rm -rf subdir

```

--------------------------------

### Using `define`/`endef` for Multi-line Commands in Make

Source: https://makefiletutorial.com/

The `define` directive creates a variable containing multiple lines of commands. Each command within a `define` block is executed in a separate shell, unlike commands separated by semicolons within a single line.

```makefile
one = export blah="I was set!"; echo $$blah

define two
export blah="I was set!"
echo $$blah
endef

all:
	@echo "This prints 'I was set'"
	@$(one)
	@echo "This does not print 'I was set' because each command runs in a separate shell"
	@$(two)
```

--------------------------------

### Appending to Simply Expanded Variables in Make

Source: https://makefiletutorial.com/

Demonstrates how to append to a simply expanded variable (`:=`). This is useful for building up strings or lists. Recursive definitions would lead to an infinite loop error if used for appending in this manner.

```makefile
one = hello
# one gets defined as a simply expanded variable (:=) and thus can handle appending
one := ${one} there

all:
	echo $(one)
```

--------------------------------

### Use `wildcard` Function with '*' in Makefile

Source: https://makefiletutorial.com/

Employ the `wildcard` function to safely use the '*' wildcard for filesystem searches. This prevents unexpected behavior when no files match the pattern.

```makefile
# Print out file information about every .c file
print: $(wildcard *.c)
	ls -la  $?

```

--------------------------------

### Executing Shell Commands with shell

Source: https://makefiletutorial.com/

Uses the `shell` function to execute a command in the system's shell. Note that this function replaces newlines in the command's output with spaces, which can lead to unformatted output.

```makefile
all: 
	@echo $(shell ls -la) # Very ugly because the newlines are gone!

```

--------------------------------

### Correctly Use `wildcard` with '*' in Makefile Variables

Source: https://makefiletutorial.com/

Always use the `wildcard` function when assigning patterns with '*' to variables to ensure correct expansion. Direct assignment like `*.o` will not expand.

```makefile
thing_wrong := *.o # Don't do this! '*' will not get expanded
thing_right := $(wildcard *.o)

all: one two three four

# Fails, because $(thing_wrong) is the string "*.o"
one: $(thing_wrong)

# Stays as *.o if there are no files that match this pattern :(
two: *.o 

# Works as you would expect! In this case, it does nothing.
three: $(thing_right)

# Same as rule three
four: $(wildcard *.o)

```

--------------------------------

### Phony Targets with .PHONY

Source: https://makefiletutorial.com/

Declare targets using `.PHONY` to prevent Make from confusing them with actual files. This ensures the target's commands always run, even if a file with the same name exists.

```makefile
some_file:
	touch some_file
	touch clean

.PHONY: clean
clean:
	rm -f some_file
	rm -f clean
```

--------------------------------

### Handling Spaces in Makefile Variables

Source: https://makefiletutorial.com/

Spaces at the end of a line in a Makefile variable assignment are preserved, while leading spaces are stripped. Use `$(nullstring)` to create a variable with a single space, useful for precise spacing.

```makefile
with_spaces = hello   # with_spaces has many spaces after "hello"
after = $(with_spaces)there

nullstring =
space = $(nullstring) # Make a variable with a single space.

all:
	echo "$(after)"
	echo start"$(space)"end
```

--------------------------------

### C File Compilation Target

Source: https://makefiletutorial.com/

A basic Makefile target to compile a single C file. It defines a prerequisite to ensure recompilation only when the source file changes.

```makefile
blah:
	cc blah.c -o blah
```

--------------------------------

### Target-Specific Variables in Make

Source: https://makefiletutorial.com/

Variables can be assigned values specific to a particular target. This allows for customization of build steps based on the target being invoked.

```makefile
all: one = cool

all:
	echo one is defined: $(one)

other:
	echo one is nothing: $(one)
```

--------------------------------

### Makefile: Check if Variable is Empty

Source: https://makefiletutorial.com/

Use `ifeq` with `strip` to check if a variable is empty or contains only whitespace. `nullstring` checks for an absolutely empty variable.

```makefile
nullstring =
foo = $(nullstring) # end of line; there is a space here

all:
ifeq ($(strip $(foo)),)
	echo "foo is empty after being stripped"
endif
ifeq ($(nullstring),)
	echo "nullstring doesn't even have spaces"
endif
```

--------------------------------

### Define Multiple Rules for Same Target with Double-Colon

Source: https://makefiletutorial.com/

Use double-colon rules to define multiple commands for the same target. Single colons would result in a warning and only the last set of commands executing.

```makefile
all: blah

blah::
	echo "hello"

blah::
	echo "hello again"
```

--------------------------------

### Basic String Substitution with subst

Source: https://makefiletutorial.com/

Uses the `subst` function to replace occurrences of a substring within a string. Ensure there are no unintended spaces in the arguments.

```makefile
bar := ${subst not,"totally", "I am not superman"}
all: 
	@echo $(bar)

```

--------------------------------

### Access Environment Variables in Make

Source: https://makefiletutorial.com/

Make automatically creates variables from environment variables. Use `$$` to echo the shell's environment variable.

```makefile
# Run this with "export shell_env_var='I am an environment variable'; make"
all:
	# Print out the Shell variable
	echo $$shell_env_var

	# Print out the Make variable
	echo $(shell_env_var)
```

--------------------------------

### Command Execution in Separate Shells

Source: https://makefiletutorial.com/

Each command in a Makefile recipe is executed in a new shell, meaning commands like `cd` do not affect subsequent commands unless they are on the same line or chained with '\'.

```makefile
all: 
	cd ..
	# The cd above does not affect this line, because each command is effectively run in a new shell
	echo `pwd`

	# This cd command affects the next because they are on the same line
	cd ..;echo `pwd`

	# Same as above
	cd ..; \
	echo `pwd`

```

--------------------------------

### Suppress Errors with '-' Prefix

Source: https://makefiletutorial.com/

Prefix a command with a hyphen (`-`) to suppress its error message and allow `make` to continue execution. Use `make -i` to suppress errors for all commands.

```makefile
one:
	# This error will be printed but ignored, and make will continue to run
	-false
	touch one

```

--------------------------------

### Undefined Variables as Empty Strings in Make

Source: https://makefiletutorial.com/

In Makefiles, referencing an undefined variable results in an empty string, not an error. This behavior can be leveraged for conditional logic or default values.

```makefile
all:
	# Undefined variables are just empty strings!
	echo $(nowhere)
```

--------------------------------

### Export Variables for Sub-Make Processes

Source: https://makefiletutorial.com/

Use the `export` directive to make Make variables available to all shell commands and sub-make processes. Variables not exported are local to the current Makefile.

```makefile
shell_env_var=Shell env var, created inside of Make
export shell_env_var
all:
	echo $(shell_env_var)
	echo $$shell_env_var
```

```makefile
new_contents = "hello:\n\techo \$\$(cooly)"

all:
	mkdir -p subdir
	printf $(new_contents) | sed -e 's/^ //' > subdir/makefile
	@echo "---MAKEFILE CONTENTS---"
	@cd subdir && cat makefile
	@echo "---END MAKEFILE CONTENTS---"
	cd subdir && $(MAKE)

# Note that variables and exports. They are set/affected globally.
cooly = "The subdirectory can see me!"
export cooly
# This would nullify the line above: unexport cooly

clean:
	rm -rf subdir

```

```makefile
one=this will only work locally
export two=we can run subcommands with this

all: 
	@echo $(one)
	@echo $$one
	@echo $(two)
	@echo $$two

```

--------------------------------

### Silence Command Echoing with '@'

Source: https://makefiletutorial.com/

Prefix a command with '@' to prevent it from being printed to the console. Alternatively, use `make -s` to silence all commands.

```makefile
all: 
	@echo "This make line will not be printed"
	echo "But this will"
```

--------------------------------

### Filtering List Elements with filter

Source: https://makefiletutorial.com/

Selects elements from a list that match a specific pattern (e.g., ending with `.o`). The `filter` function is useful for selecting items based on criteria.

```makefile
obj_files = foo.result bar.o lose.o
filtered_files = $(filter %.o,$(obj_files))

all:
	@echo $(filtered_files)

```

--------------------------------

### Makefile Rule with Multiple Targets

Source: https://makefiletutorial.com/

When a rule has multiple targets, the associated commands are executed for each target. The automatic variable $@ represents the current target name.

```makefile
all: f1.o f2.o

f1.o f2.o:
	echo $@

```

--------------------------------

### Error Handling with .DELETE_ON_ERROR

Source: https://makefiletutorial.com/

The `.DELETE_ON_ERROR` directive instructs Make to delete the target of a rule if any command within that rule fails (returns a non-zero exit status). This helps prevent Make from attempting to use partially built or corrupted targets in subsequent steps.

```makefile
.DELETE_ON_ERROR:
all: one two

one:
	touch one
	false

two:
	touch two
	false
```

--------------------------------

### Using Double Dollar Sign for Shell Variables

Source: https://makefiletutorial.com/

Use `$$` to represent a literal dollar sign in a command, allowing you to use shell variables within Makefiles. Distinguishes between Makefile variables (`$(var)`) and shell variables (`$$var`).

```makefile
make_var = I am a make variable
all:
	# Same as running "sh_var='I am a shell variable'; echo $sh_var" in the shell
	sh_var='I am a shell variable'; echo $$sh_var

	# Same as running "echo I am a make variable" in the shell
	echo $(make_var)
```

--------------------------------

### Overriding Command-Line Variables in Make

Source: https://makefiletutorial.com/

Use the `override` directive to ensure a variable defined within the Makefile takes precedence over any variable with the same name passed on the command line. Variables without `override` can be overridden by command-line arguments.

```makefile
# Overrides command line arguments
override option_one = did_override
# Does not override command line arguments
option_two = not_override
all:
	echo $(option_one)
	echo $(option_two)
```

--------------------------------

### Makefile: Check if Variable is Defined

Source: https://makefiletutorial.com/

Use `ifdef` to check if a variable is defined, regardless of its value. `ifndef` checks for an undefined variable.

```makefile
bar =
foo = $(bar)

all:
ifdef foo
	echo "foo is defined"
endif
ifndef bar
	echo "but bar is not"
endif

```

--------------------------------

### Conditional Variable Assignment with `?=` in Make

Source: https://makefiletutorial.com/

The `?=` operator assigns a variable's value only if the variable has not been set previously. This is useful for providing default values that can be overridden.

```makefile
one = hello
one ?= will not be set
two ?= will be set

all:
	echo $(one)
	echo $(two)
```

--------------------------------

### Appending to Variables with `+=` in Make

Source: https://makefiletutorial.com/

The `+=` operator appends to an existing variable's value. This is a common way to build up lists or strings incrementally.

```makefile
foo := start
foo += more

all:
	echo $(foo)
```

--------------------------------

### Variable assignment with quotes

Source: https://makefiletutorial.com/

Single and double quotes are treated as literal characters by Make and do not affect variable assignment. They are primarily for shell commands.

```makefile
a := one two# a is set to the string "one two"
b := 'one two' # Not recommended. b is set to the string "'one two'"
all:
	printf '$a'
	printf $b
```

=== COMPLETE CONTENT === This response contains all available snippets from this library. No additional content exists. Do not make further requests.