### read()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Starts an asynchronous read cycle for the sensor.

```APIDOC
## void read()

### Description
Coordinates enabling the sensor, selecting filters in sequence, and calling the FreqCount library to obtain a full color reading (R, G, and B).
```

--------------------------------

### begin()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Initializes the sensor object. This must be called once during the setup() phase for every instance.

```APIDOC
## void begin()

### Description
Initializes the object data. This method must be called once during setup() for every object instance as it cannot be fully initialized in the constructor.
```

--------------------------------

### Define class inheritance and usage example

Source: https://majicdesigns.github.io/MD_TCS230/graph_legend.html

A set of C++ class definitions used to demonstrate various inheritance and containment relationships in Doxygen graphs.

```cpp
/*! Invisible class because of truncation */
class Invisible { };
/*! Truncated class, inheritance relation is hidden */
class Truncated : public Invisible { };
/* Class not documented with doxygen comments */
class Undocumented { };
/*! Class that is inherited using public inheritance */
class PublicBase : public Truncated { };
/*! A template class */
template<class T> class Templ { };
/*! Class that is inherited using protected inheritance */
class ProtectedBase { };
/*! Class that is inherited using private inheritance */
class PrivateBase { };
/*! Class that is used by the Inherited class */
class Used { };
/*! Super class that inherits a number of other classes */
class Inherited : public PublicBase,
protected ProtectedBase,
private PrivateBase,
public Undocumented,
public Templ<int>
{
private:
Used *m_usedClass;
};
```

--------------------------------

### bool available()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Checks if a sensor reading is complete and ready for processing.

```APIDOC
## bool available()

### Description
Determines when a sensor read has completed. Returns true when a value is ready for processing, allowing calls to getRGB() or getRaw().

### Returns
- **bool** - true if data is available, false otherwise.
```

--------------------------------

### Library Configuration Constants

Source: https://majicdesigns.github.io/MD_TCS230/_m_d___t_c_s230_8h.html

General constants for array sizing and pin definition.

```cpp
const uint8_t RGB_SIZE = 3;
const uint8_t NO_PIN = 0xff;
```

--------------------------------

### MD_TCS230(uint8_t s2, uint8_t s3, uint8_t s0, uint8_t s1)

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Instantiates the class with pins for color filter selection and prescaler control.

```APIDOC
## MD_TCS230(uint8_t s2, uint8_t s3, uint8_t s0, uint8_t s1)

### Description
Instantiate a new instance of the class. Optionally, s0 and s1 can be specified to allow changes to the prescaler.

### Parameters
- **s2** (uint8_t) - Arduino output pin connected to sensor s2 input.
- **s3** (uint8_t) - Arduino output pin connected to sensor s3 input.
- **s0** (uint8_t) - Arduino output pin connected to sensor s0 input.
- **s1** (uint8_t) - Arduino output pin connected to sensor s1 input.
```

--------------------------------

### MD_TCS230(uint8_t s2, uint8_t s3, uint8_t s0, uint8_t s1, uint8_t oe)

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Constructor to instantiate a new MD_TCS230 object and configure the hardware pins.

```APIDOC
## MD_TCS230(uint8_t s2, uint8_t s3, uint8_t s0, uint8_t s1, uint8_t oe)

### Description
Instantiates a new instance of the MD_TCS230 class. Configures the Arduino pins connected to the sensor's control inputs.

### Parameters
- **s2** (uint8_t) - Arduino output pin connected to sensor s2 input.
- **s3** (uint8_t) - Arduino output pin connected to sensor s3 input.
- **s0** (uint8_t) - Arduino output pin connected to sensor s0 input.
- **s1** (uint8_t) - Arduino output pin connected to sensor s1 input.
- **oe** (uint8_t) - Arduino output pin connected to sensor oe input.
```

--------------------------------

### MD_TCS230(uint8_t s2, uint8_t s3)

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Instantiates the class with the minimum required pins for color filter selection.

```APIDOC
## MD_TCS230(uint8_t s2, uint8_t s3)

### Description
Instantiate a new instance of the class using the minimum required pins for color filter selection.

### Parameters
- **s2** (uint8_t) - Arduino output pin connected to sensor s2 input.
- **s3** (uint8_t) - Arduino output pin connected to sensor s3 input.
```

--------------------------------

### MD_TCS230(uint8_t s2, uint8_t s3, uint8_t oe)

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Instantiates the class with pins for color filter selection and an optional output enable pin for multiple sensors.

```APIDOC
## MD_TCS230(uint8_t s2, uint8_t s3, uint8_t oe)

### Description
Instantiate a new instance of the class. Optionally, the oe pin can be specified if multiple sensors are to be connected.

### Parameters
- **s2** (uint8_t) - Arduino output pin connected to sensor s2 input.
- **s3** (uint8_t) - Arduino output pin connected to sensor s3 input.
- **oe** (uint8_t) - Arduino output pin connected to sensor oe input.
```

--------------------------------

### Sensor Configuration Methods

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Methods to configure sensor hardware settings such as filters, frequency scaling, and calibration.

```APIDOC
## Configuration Methods

### begin()
Initializes the sensor hardware.

### setFilter(uint8_t f)
Sets the color filter.

### setFrequency(uint8_t f)
Sets the frequency scaling.

### setEnable(bool t)
Enables or disables the sensor.

### setSampling(uint8_t t)
Sets the sampling mode.

### setDarkCal(sensorData *d)
Sets the dark calibration data.

### setWhiteCal(sensorData *d)
Sets the white calibration data.
```

--------------------------------

### Library Dependencies

Source: https://majicdesigns.github.io/MD_TCS230/_m_d___t_c_s230_8h.html

Required header files for the MD_TCS230 library functionality.

```cpp
#include <Arduino.h>
#include <FreqCount.h>
```

--------------------------------

### Include MD_TCS230 Library

Source: https://majicdesigns.github.io/MD_TCS230/_m_d___t_c_s230_8cpp.html

Include the library header file to access TCS230 sensor functionality.

```cpp
#include <MD_TCS230.h>
```

--------------------------------

### MD_TCS230 Constructor

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Initializes the MD_TCS230 object with the specified pin assignments for the sensor control lines.

```APIDOC
## MD_TCS230(uint8_t s2, uint8_t s3, [uint8_t s0, uint8_t s1], [uint8_t oe])

### Description
Constructs the sensor object. Various overloads allow specifying pins for S2, S3, S0, S1, and OE control lines.

### Parameters
- **s2** (uint8_t) - Required - Pin connected to S2
- **s3** (uint8_t) - Required - Pin connected to S3
- **s0** (uint8_t) - Optional - Pin connected to S0
- **s1** (uint8_t) - Optional - Pin connected to S1
- **oe** (uint8_t) - Optional - Pin connected to OE
```

--------------------------------

### Data Acquisition Methods

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Methods to read and retrieve color data from the sensor.

```APIDOC
## Data Acquisition Methods

### read()
Triggers a sensor reading.

### available()
Returns true if new data is available.

### getRGB(colorData *rgb)
Retrieves the processed RGB color data.

### getRaw(sensorData *d)
Retrieves the raw sensor data.

### readSingle()
Performs a single reading and returns the value as uint32_t.
```

--------------------------------

### setWhiteCal(sensorData *d)

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Sets the white balance calibration data using a pointer to a sensorData structure.

```APIDOC
## void setWhiteCal(sensorData *d)

### Description
Sets the values to be used as the white balance calibration data. These numbers can be obtained from getRaw() during the calibration process.

### Parameters
- **d** (sensorData *) - Required - Pointer to a sensorData structure containing the calibration data.
```

--------------------------------

### readSingle()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Performs a synchronous, blocking read of the sensor.

```APIDOC
## uint32_t readSingle()

### Description
Initiates a blocking read of the sensor. Returns the raw data in Hz once the cycle is complete.

### Returns
- **uint32_t** - The raw data read from the sensor in Hz.
```

--------------------------------

### MD_TCS230 Class Methods

Source: https://majicdesigns.github.io/MD_TCS230/functions.html

A collection of public methods available in the MD_TCS230 class for sensor initialization, configuration, and data acquisition.

```APIDOC
## MD_TCS230 Class Methods

### Available Methods
- **MD_TCS230()**: Constructor for the sensor object.
- **~MD_TCS230()**: Destructor for the sensor object.
- **begin()**: Initializes the sensor hardware.
- **available()**: Checks if new sensor data is available.
- **read()**: Reads the current color values.
- **readSingle()**: Reads a single color component.
- **getRaw()**: Retrieves raw sensor data.
- **getRGB()**: Retrieves processed RGB color values.
- **setDarkCal()**: Sets the dark calibration values.
- **setWhiteCal()**: Sets the white calibration values.
- **setEnable()**: Enables or disables the sensor.
- **setFilter()**: Configures the color filter settings.
- **setFrequency()**: Sets the output frequency scaling.
- **setSampling()**: Configures the sampling rate.
```

--------------------------------

### setFrequency()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Sets the frequency prescaler for the sensor output.

```APIDOC
## void MD_TCS230::setFrequency(uint8_t f)

### Description
Set the outputs s0, s1 to match the specified frequency prescaler. This is one of the defined values TCS230_FREQ_*.

### Parameters
- **f** (uint8_t) - Required - The required filter, one of TCS230_FREQ_*.
```

--------------------------------

### Array Size Macro

Source: https://majicdesigns.github.io/MD_TCS230/_m_d___t_c_s230_8h.html

Macro to calculate the number of elements in an array.

```cpp
#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
```

--------------------------------

### setEnable()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Enables or disables the sensor output using the OE pin or frequency scaling pins.

```APIDOC
## void MD_TCS230::setEnable(bool t)

### Description
Enable (true) or disable (false) sensor output. The method uses the OE pin if defined, or the S0/S1 pins to set the frequency to TCS230_FREQ_OFF.

### Parameters
- **t** (bool) - Required - True to enable the device, false to disable.
```

--------------------------------

### getRGB()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Retrieves the last sensor reading in RGB format.

```APIDOC
## void getRGB(colorData *rgb)

### Description
Retrieves the last read sensor data in RGB format into the provided structure.

### Parameters
- **rgb** (colorData*) - Required - Pointer to a colorData structure to receive the RGB data.
```

--------------------------------

### getRaw()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Retrieves the raw sensor data from the last reading.

```APIDOC
## void getRaw(sensorData *d)

### Description
Retrieves the last read sensor data as raw counts into the provided structure.

### Parameters
- **d** (sensorData*) - Required - Pointer to a sensorData structure to receive the RGB data.
```

--------------------------------

### MD_TCS230 Library Functions

Source: https://majicdesigns.github.io/MD_TCS230/functions_func.html

A list of public methods available in the MD_TCS230 class for sensor interaction.

```APIDOC
## MD_TCS230 Class Methods

- **available()**: Checks if sensor data is available.
- **begin()**: Initializes the sensor.
- **getRaw()**: Retrieves raw sensor data.
- **getRGB()**: Retrieves color data in RGB format.
- **MD_TCS230()**: Constructor for the class.
- **read()**: Reads sensor values.
- **readSingle()**: Reads a single sensor value.
- **setDarkCal()**: Sets dark calibration values.
- **setEnable()**: Enables or disables the sensor.
- **setFilter()**: Configures the sensor color filter.
- **setFrequency()**: Sets the sensor output frequency.
- **setSampling()**: Configures the sampling rate.
- **setWhiteCal()**: Sets white calibration values.
- **~MD_TCS230()**: Destructor for the class.
```

--------------------------------

### setSampling(uint8_t t)

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Sets the sampling period divisor for the sensor. Higher divisors result in shorter sample times, which are faster but less accurate.

```APIDOC
## void setSampling(uint8_t t)

### Description
Sets the sampling period divisor. The library defaults to a maximum of 1000ms for a sample (divisor = 1). Higher divisors create shorter sample times (e.g., 5 = 200ms, 10 = 100ms, 100 = 10ms). Shorter samples are less accurate and only recommended when the range of colors to be detected are highly separated on the RGB color chart.

### Parameters
- **t** (uint8_t) - Required - Cycle time divisor.
```

--------------------------------

### Frequency Scaling Constants

Source: https://majicdesigns.github.io/MD_TCS230/_m_d___t_c_s230_8h.html

Constants used for setting the TCS230 frequency prescaler.

```cpp
const uint8_t TCS230_FREQ_HI = 0;
const uint8_t TCS230_FREQ_MID = 1;
const uint8_t TCS230_FREQ_LO = 2;
const uint8_t TCS230_FREQ_OFF = 3;
```

--------------------------------

### setFilter()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Sets the photodiode filter type for the sensor.

```APIDOC
## void MD_TCS230::setFilter(uint8_t f)

### Description
Set the outputs s2, s3 to match the specified photodiode filter. This is one of the defined values TCS230_RGB_*.

### Parameters
- **f** (uint8_t) - Required - The required filter, one of TCS230_RGB_*.
```

--------------------------------

### setDarkCal()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Sets the dark calibration data for the sensor using a provided sensorData structure.

```APIDOC
## void MD_TCS230::setDarkCal(sensorData *d)

### Description
Sets the values to be used as the dark calibration data. These numbers can be obtained from getRaw() during the calibration process.

### Parameters
- **d** (sensorData*) - Required - Pointer to a sensorData structure containing the calibration data.
```

--------------------------------

### Color Filter Selection Constants

Source: https://majicdesigns.github.io/MD_TCS230/_m_d___t_c_s230_8h.html

Constants for selecting the color detector filter on the TCS230 sensor.

```cpp
const uint8_t TCS230_RGB_R = 0;
const uint8_t TCS230_RGB_G = 1;
const uint8_t TCS230_RGB_B = 2;
const uint8_t TCS230_RGB_X = 3;
```

--------------------------------

### Debug Macros

Source: https://majicdesigns.github.io/MD_TCS230/_m_d___t_c_s230_8cpp.html

Macros used for serial debugging. Set DEBUG_TCS230 to 1 to enable output.

```cpp
#define DEBUG_TCS230 0
#define DUMP(s, v)
#define DUMPS(s)
```

--------------------------------

### ~MD_TCS230()

Source: https://majicdesigns.github.io/MD_TCS230/class_m_d___t_c_s230.html

Destructor for the MD_TCS230 class.

```APIDOC
## ~MD_TCS230()

### Description
Class destructor. Releases allocated memory and performs cleanup when the object is no longer required.
```

--------------------------------

### sensorData Structure Definition

Source: https://majicdesigns.github.io/MD_TCS230/structsensor_data.html

The sensorData struct contains an array of three int32_t values representing raw R, G, and B readings.

```cpp
int32_t | **value** [RGB_SIZE]
```

=== COMPLETE CONTENT === This response contains all available snippets from this library. No additional content exists. Do not make further requests.