### Sequence Block Programming Example

Source: https://www.loxone.com/dede/kb/ablaufsteuerung

Demonstrates how to program the Loxone Sequence block by dragging elements from the library to the editor. Each line must start with a command, and comments can be added for clarity. This example illustrates a heating control scenario.

```Loxone Sequence
// Beispiel: Zweistufige Warmwasserbereitung

// Sequenz 1: Speicher 1 aufheizen
START SEQ 1
  IF WarmwasserSoll > Speicher1Temp THEN
    SET Heizung = ON
    SET Pumpe1 = ON
  ELSE
    SET Heizung = OFF
    SET Pumpe1 = OFF
  ENDIF
  WAIT 60 // Warte 60 Sekunden
  IF Speicher1Temp >= WarmwasserSoll THEN
    GOTO SEQ 2 // Wenn Speicher 1 voll, zur Sequenz 2 wechseln
  ENDIF
ENDSEQ

// Sequenz 2: Speicher 2 aufheizen
START SEQ 2
  IF WarmwasserSoll > Speicher2Temp THEN
    SET Heizung = ON
    SET Pumpe2 = ON
  ELSE
    SET Heizung = OFF
    SET Pumpe2 = OFF
  ENDIF
  WAIT 60 // Warte 60 Sekunden
  IF Speicher2Temp >= WarmwasserSoll THEN
    GOTO SEQ 1 // Wenn Speicher 2 voll, zur Sequenz 1 wechseln
  ENDIF
ENDSEQ

```

--------------------------------

### Example of Setting an Output using Formula

Source: https://www.loxone.com/dede/kb/ablaufsteuerung

Illustrates how to set and compare outputs using commands supported by the Loxone Formula block. This example shows setting output AQ1 based on input AI2 multiplied by 3.

```Loxone Sequence
// Beispiel: Ausgang setzen mit Formel
SET AQ1 = AI2 * 3

// Beispiel: Vergleich eines Ausgangs
IF AQ1 > 100 THEN
  // Aktion ausführen
ENDIF

```

--------------------------------

### Accessing CasaTunes Setup

Source: https://www.loxone.com/dede/kb/loxone-music-server-powered-by-casatunes

URLs to access the CasaTunes setup interface for managing the Music Server. This includes accessing it remotely via IP or locally using 'localhost'.

```http
http://"ip"/casasetup
http://localhost/casasetup
```

--------------------------------

### Loxone Intercom Firmware Update Management

Source: https://www.loxone.com/dede/kb/intercom

Guides on how to register for and install test firmware versions on the Loxone Intercom, and how to revert back to the official release version.

```APIDOC
## Loxone Intercom Firmware Update Management

### Description
This section explains how to manage firmware updates for the Loxone Intercom, specifically focusing on registering for and installing alpha (test) firmware versions and returning to the stable release version.

### Registering for Test Firmware
To enable the Intercom to install test firmware, execute the following command:

`http://<ip-intercom>/dev/cfg/updatelevel/alpha`

Once registered, a prompt will appear in the Intercom's web interface to install the new test firmware.

### Reverting to Release Version
After installing and testing the alpha firmware, it is crucial to re-register for the official release version to prevent future automatic updates to test versions. Use the following command:

`http://<ip-intercom>/dev/cfg/updatelevel/release`
```