### Launch nzodbcsetup.exe from command line Source: https://www.ibm.com/docs/en/netezza?topic=icow-installing-odbc-driver-by-using-gui-2 Command to start the GUI installation program from the command line. The example uses the C: drive, but you can install wherever appropriate. ```plaintext C:\>nzodbcsetup.exe ``` -------------------------------- ### nzsql command to test installation Source: https://www.ibm.com/docs/en/netezza?topic=aslpa-using-cpan-comprehensive-perl-archive-network-1 Start the interactive SQL terminal to test the installation. The example shows the welcome message and a successful query of the Unquote function. ```shell [nz@host]$ nzsql Welcome to nzsql, the IBM Netezza SQL interactive terminal. Type: \h for help with SQL commands ? for help on internal slash commands \g or terminate with semicolon to execute query \q to quit SYSTEM(ADMIN)=> select unquote('"hello"'); UNQUOTE hello (1 row) ``` -------------------------------- ### Installation script output example Source: https://www.ibm.com/docs/en/netezza?topic=platform-running-installation-script-data-plane-deployment Example output shown during execution of the installation script, including validation, API checks, bucket creation, and final success status. ```text ============================================================ Netezza GCP Data Plane Deployment ============================================================ 2026-06-15 15:00:00 - INFO - Loading configuration from config.yaml 2026-06-15 15:00:00 - INFO - Configuration loaded successfully ============================================================ Starting Input Validation ============================================================ 2026-06-15 15:00:00 - INFO - Project ID validation passed: my-netezza-project 2026-06-15 15:00:00 - INFO - Region validation passed: us-east4 2026-06-15 15:00:00 - INFO - Zones validation passed: us-east4-a, us-east4-b, us-east4-c 2026-06-15 15:00:00 - INFO - CIDR validation passed 2026-06-15 15:00:01 - INFO - Authenticating with GCP... 2026-06-15 15:00:01 - INFO - GCP authentication successful ============================================================ Validating Required GCP APIs ============================================================ 2026-06-15 15:00:02 - INFO - ✓ All required APIs are enabled ============================================================ Creating Infrastructure Bucket ============================================================ 2026-06-15 15:00:03 - INFO - Creating bucket: netezza-infra-my-netezza-project 2026-06-15 15:00:04 - INFO - Bucket created successfully ... 2026-06-15 15:45:00 - INFO - Deployment status: SUCCEEDED ============================================================ ✓ Netezza GCP Installation Completed Successfully ============================================================ ``` -------------------------------- ### Example output for starting replication Source: https://www.ibm.com/docs/en/netezza?topic=administering-starting-stopping-replication-given-database Example command and output when starting replication on database MYDB-1. The output confirms that the replication scheduler started successfully. ```bash nzdr replication start --db-name MYDB-1 Successfully started replication scheduler on db MYDB-1. ``` -------------------------------- ### Example: start replication on node CPDS-A Source: https://www.ibm.com/docs/en/netezza?topic=administering-starting-stopping-replication-given-node Example of starting replication on node CPDS-A and the expected success message. ```bash nzdr replication start --node-name CPDS-A Successfully started replication scheduler on node CPDS-A. ``` -------------------------------- ### nzcm --installed output example Source: https://www.ibm.com/docs/en/netezza?topic=extension-installation-troubleshooting Example output confirming that the R adapter is installed, showing version 11.2.1.1. ```text nzcm --installed | grep r_ae r_ae | 11.2.1.1 | ``` -------------------------------- ### Test installation with nzsql Source: https://www.ibm.com/docs/en/netezza?topic=adapter-using-cpan-comprehensive-perl-archive-network Test the installation by starting nzsql and running the unquote function. The example shows the expected output: selecting unquote('"hello"') returns 'hello'. ```bash [nz@host]$ nzsql ``` ```bash [nz@host]$ nzsql Welcome to nzsql, the IBM Netezza SQL interactive terminal. Type: \h for help with SQL commands ? for help on internal slash commands \g or terminate with semicolon to execute query \q to quit SYSTEM(ADMIN)=> select unquote('"hello"'); UNQUOTE hello (1 row) ``` -------------------------------- ### R--version output example Source: https://www.ibm.com/docs/en/netezza?topic=extension-installation-troubleshooting Example output from the R--version command, confirming that R is successfully installed. ```text /nz/export/ae/languages/r/3.5/host64/bin/R--version R version 3.5.1 (2018-07-02) -- "Feather Spray" Copyright (C) 2018 The R Foundation for Statistical Computing Platform: x86_64-pc-linux-gnu (64-bit) R is free software and comes with ABSOLUTELY NO WARRANTY. You are welcome to redistribute it under the terms of the GNU General Public License versions 2 or 3. For more information about these matters see http://www.gnu.org/licenses/. ``` -------------------------------- ### Example output from nzhostrestore Source: https://www.ibm.com/docs/en/netezza?topic=restore-host-data-directory-catalog Example output from the nzhostrestore command. It shows the sequence of steps, including confirmation prompts, warnings about hardware ID reassignment and rollback, and the final message to start the system with 'nzstart'. ```text Starting host restore Extracting host data archive ... Restore host data archived Thu Dec 24 03:42:02 EST 2009? (y/n) [n] `y` Stopping the system ... Starting topology restore ... Stopping the system ... Warning: The hardware ids will be reassigned. The hardware id assignments from the archived system catalog have been saved in '/tmp/hwids-old.z.tar' Reinitializing hardware metadata ... Restoring the devmap / topology tables ... Stopping the system ... Starting the system ... Waiting for system to go online ... Checking for orphaned SPU tables ... Loading hardware ids ... Topology recovery completed successfully. Stopping the system ... Warning: The restore will now rollback spu data to Thu Dec 24 03:42:02 EST 2009. This operation cannot be undone. Ok to proceed? (y/n) [n] **y** Installing system catalog to '/nz/data.1.0' ... StarSynchronizing data on spus ... done. Stopping the system ... Restore complete. You can now start the system using 'nzstart'. ``` -------------------------------- ### Sample startupsvr.log messages Source: https://www.ibm.com/docs/en/netezza?topic=sl-startup-server Example log entries from the startupsvr.log file showing the startup process, including program start, system start, and SPU reboot messages. ```plaintext 2012-12-12 18:11:43.951689 EST Info: NZ-00022: --- program 'startupsvr' (25173) starting on host 'nzhost' ... --- 2012-12-12 18:11:43.952733 EST Info: NZ-00307: starting the system, restart = no 2012-12-12 18:11:43.952778 EST Info: NZ-00313: running onStart: 'prepareForStart' 2012-12-12 18:11:43 EST: Rebooting SPUs via RICMP ... ``` -------------------------------- ### Run INZA package installer Source: https://www.ibm.com/docs/en/netezza?topic=analytics-installing-upgrading-netezza-performance-server Starts the interactive INZA package installer. The script prompts for installation options and guides through the process. ```bash [nz@e1n1 inza]$ ./inzaPackageInstaller.sh ``` -------------------------------- ### Example nzstop and nzstart commands Source: https://www.ibm.com/docs/en/netezza?topic=npspn-changing-default-port-numbers Example output showing the nzstop and nzstart commands run from the /nz/kit/sys/init directory as the nz user. ```shell [nz@nzhost init]$ `nzstop` [nz@nzhost init]$ `nzstart` ``` -------------------------------- ### Create sample library mylib Source: https://www.ibm.com/docs/en/netezza?topic=npssr-create-replace-library-2 Example command to create a library named mylib with automatic load and external host and SPU object files. The expected output is 'CREATE LIBRARY'. ```sql MYDB.SCHEMA(MYUSER)=> `CREATE LIBRARY mylib AUTOMATIC LOAD EXTERNAL HOST OBJECT '/home/nz/libs/mylib.o_x86' EXTERNAL SPU OBJECT '/home/nz/libs/mylib.o_spu10';` CREATE LIBRARY ``` -------------------------------- ### Example: Create and populate SIMPLE1, call SIMPLE2RCV_ADV and RCV2SIMPLE_NUM, then query and drop tables Source: https://www.ibm.com/docs/en/netezza?topic=operations-rcv2simple-num This example creates a simple table SIMPLE1, inserts three rows, calls NZM..SIMPLE2RCV_ADV to convert it to a matrix (RCV1) and metadata (RCV_META1), then calls NZM..RCV2SIMPLE_NUM to convert back to a simple table (SIMPLE3). It then selects from the resulting tables and drops all created tables. The output shows the return values and the resulting tables. ```sql **CREATE TABLE SIMPLE1 (ID INTEGER, V1 DOUBLE, V2 DOUBLE, V3 DOUBLE); INSERT INTO SIMPLE1 VALUES(1,100001, 100002, 100003); INSERT INTO SIMPLE1 VALUES(4, 200001, 200002, 200003); INSERT INTO SIMPLE1 VALUES(9, 300001, 300002, 300003); CALL NZM..SIMPLE2RCV_ADV('outtable=RCV1, outmeta=RCV_META1, intable=SIMPLE1, incolumnlist=., id=ID'); CALL NZM..RCV2SIMPLE_NUM('intable=RCV1,outtable=SIMPLE3, colprefix=column'); SELECT * FROM SIMPLE3; SELECT * FROM RCV1; SELECT * FROM RCV_META1; DROPTABLE SIMPLE1; DROP TABLE SIMPLE3; DROP TABLE RCV1; DROP TABLE RCV_META1;** ``` ```sql _SIMPLE2RCV_ADV ---------------- 3 (1 row) RCV2SIMPLE_NUM ---------------- 3 (1 row) ID | COLUMN1 | COLUMN2 | COLUMN3 ----+---------+---------+--------- 2 | 200001 | 200002 | 200003 3 | 300001 | 300002 | 300003 1 | 100001 | 100002 | 100003 (3 rows) ROW | COL | VALUE -----+-----+-------- 1| 1 | 100001 1| 2 | 100002 1| 3 | 100003 2| 1 | 200001 2| 2 | 200002 2| 3 | 200003 3| 1 | 300001 3| 2 | 300002 3| 3 | 300003 (9 rows) COLID | COLNAME | COLDICT | OUTCOLBEG | OUTCOLEND -------+---------+---------+-----------+----------- 1 | V1| | 1 | 1 2 | V2| | 2 | 2 3 | V3| | 3 | 3 (3 rows)_ ``` -------------------------------- ### Sample output for Kerberos configuration (SHOW AUTHENTICATION ALL;) Source: https://www.ibm.com/docs/en/netezza?topic=npsscr-show-authentication-2 Example command and output for a Kerberos configuration, displaying the authentication method and Kerberos-specific attributes. ```sql SYSTEM.ADMIN (ADMIN) => `SHOW AUTHENTICATION ALL;` AUTH_OPTION | AUTH_VALUE --------------------------------+-------------------------- AUTHENTICATION METHOD | KERBEROS AUTHMTHD KERBEROS REALM | SOMEBOX.MYDOMAIN.COM AUTHMTHD KERBEROS KDC | myservr.mydomain.com:88 AUTHMTHD KERBEROS USERCASE | matchdb ``` -------------------------------- ### Initiate Netezza backup with nzbackup using NetBackup connector Source: https://www.ibm.com/docs/en/netezza?topic=server-initiate-backups-from-netezza-performance-cli Use this syntax to start a backup from the command line. You must specify the NetBackup datastore server and NetBackup Policy. Alternatively, set the environment variables DATASTORE_SERVER and DATASTORE_POLICY, but the -connectorArgs argument takes precedence if both are provided. ```shell nzbackup -db dbname -connector netbackup -connectorArgs "DATASTORE_SERVER=NetBackup_master_server:DATASTORE_POLICY= NetBackup_policy_name" ``` -------------------------------- ### Get SPUPad value with string_pad_get and commit Source: https://www.ibm.com/docs/en/netezza?topic=scuths-tables-spupad-operations-1 Retrieves the character at index 4 from the SPUPads using string_pad_get, returning one row per row in multi_dslice. The COMMIT ends the transaction started in the previous example. ```sql MYDB.SCHEMA(MYUSER)=> `SELECT string_pad_get(4) FROM multi_dslice;` STRING_PAD_GET ---------------- z z z z z z z z z (9 rows) MYDB.SCHEMA(MYUSER)=> `COMMIT;` COMMIT ``` -------------------------------- ### Initialize dsm.sys and dsm.opt files Source: https://www.ibm.com/docs/en/netezza?topic=connector-setting-up-tivoli-storage-manager-client-backups Copy the sample configuration files to their active locations in the API bin64 directory. ```bash cd /opt/tivoli/tsm/client/api/bin64 # cp dsm.opt.smp dsm.opt # cp dsm.sys.smp dsm.sys ``` -------------------------------- ### Example output of nzbnrver Source: https://www.ibm.com/docs/en/netezza?topic=installation-installing-networker Example output of nzbnrver showing that NetWorker 19.1.0.2 is installed (nw64=19.1.0.2) while other backup clients are not installed. ```bash nzbnrver tsm32=not installed tsm64=not installed nb32=not installed nb64=not installed nw32=not installed nw64=19.1.0.2 ``` -------------------------------- ### Example: Power on and check nodes for enclosures 5-6 Source: https://www.ibm.com/docs/en/netezza?topic=system-platform-netezza-performance-server-software-expansion Example commands to power on and check the power status of nodes in enclosures 5 and 6. ```bash for node in e{5..6}n{1..4}bmc; do echo $node; ipmitool -I lanplus -H $node -U USERID -P PASSW0RD power on ; done for node in e{5..6}n{1..4}bmc; do echo $node; ipmitool -I lanplus -H $node -U USERID -P PASSW0RD power status ; done ``` -------------------------------- ### Example: get console service IP Source: https://www.ibm.com/docs/en/netezza?topic=security-setting-up-ssl-certificates-aws Example command to get the console service IP using the private endpoint namespace. ```bash oc -n ibm-nz-cyclops-private get svc | awk '{print $4}' ``` -------------------------------- ### SHOW SESSION ALL; example with output Source: https://www.ibm.com/docs/en/netezza?topic=npsscr-show-session-1 Example of showing information about all sessions, including the command and its output table. ```sql SHOW SESSION ALL; ``` ```text SESSION_ID | PID | USERNAME | DBNAME | TYPE | CONNECT_TIME | SESSION_STATE_NAME | SQLTEXT | PRIORITY | CLIENT_PID | CLIENT_IP -----------+-------+----------+--------+------+---------------------+---------------- 16010 | 11807 | ADMIN | SYSTEM | sql | 2008-03-19 12:45:12 | idle | | 3 | 11806 | 127.0.0.1 16011 | 11809 | ADMIN | SYSTEM | sql | 2008-03-19 12:45:16 | active | show session all; | 3 | 11808 | 127.0.0.1 ``` -------------------------------- ### Example output of installing NetWorker client RPM Source: https://www.ibm.com/docs/en/netezza?topic=installation-installing-networker Example of installing the NetWorker client RPM and its expected output, including a NOKEY warning. ```bash rpm -ivh lgtoclnt-19.1.0.2-1.x86_64.rpm warning: lgtoclnt-19.1.0.2-1.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID 5301dfb7: NOKEY Preparing... ################################# [100%] Updating / installing... 1:lgtoclnt-19.1.0.2-1 ################################# [100%] ``` -------------------------------- ### Example deployment output Source: https://www.ibm.com/docs/en/netezza?topic=platform-deploying-netezza-engine During execution, you see output similar to this example, which shows the deployment progress and final details. ```text ============================================================ Netezza Engine Deployment ============================================================ 2026-06-15 15:00:00 - INFO - Loading configuration from engine.yaml 2026-06-15 15:00:00 - INFO - Configuration loaded successfully ============================================================ Validating Configuration ============================================================ 2026-06-15 15:00:01 - INFO - Engine name validation passed: netezza-engine 2026-06-15 15:00:01 - INFO - Storage configuration validated 2026-06-15 15:00:01 - INFO - Resource allocation validated 2026-06-15 15:00:01 - INFO - Network configuration validated ============================================================ Verifying GKE Cluster ============================================================ 2026-06-15 15:00:02 - INFO - Connecting to GKE cluster... 2026-06-15 15:00:03 - INFO - Cluster connection successful 2026-06-15 15:00:03 - INFO - Cluster has sufficient resources ============================================================ Creating Kubernetes Resources ============================================================ 2026-06-15 15:00:05 - INFO - Creating namespace: netezza 2026-06-15 15:00:06 - INFO - Creating persistent volume claims... 2026-06-15 15:00:10 - INFO - Creating config maps... ============================================================ Deploying Netezza Engine ============================================================ 2026-06-15 15:00:15 - INFO - Deploying engine pods... 2026-06-15 15:00:20 - INFO - Deploying SPU pods (4 SPUs)... 2026-06-15 15:05:00 - INFO - All SPU pods running ============================================================ Deployment Complete ============================================================ 2026-06-15 15:15:20 - INFO - Netezza engine deployed successfully 2026-06-15 15:15:20 - INFO - Engine Name: netezza-engine 2026-06-15 15:15:20 - INFO - External IP: 34.123.45.67 2026-06-15 15:15:20 - INFO - Connection Port: 5480 ``` -------------------------------- ### INZA installer interactive session example Source: https://www.ibm.com/docs/en/netezza?topic=analytics-installing-upgrading-netezza-performance-server Example interactive session of the INZA package installer. Shows the prompts and expected responses for installing Netezza Analytics packages, selecting the compressed file, resetting repository configuration, and running the cartridge installer in Express mode. ```text Do you want to install the Netezza Analytics packages? (y/n): y Confirm that the following packages should be installed. Netezza Analytics package: YES Do you want to install the above selections? Enter "y" to continue, "x" to exit or any other key to be prompted to modify your selection: y Installing Netezza Analytics packages... Available compressed installation file or files: [0] /nz/var/inza/inza-11.2.27.zip [1] A compressed file in a different directory or with a non-standard name. Enter your selection: 0 . . . Installing NZCM v.11.2.27... Do you want to reset the repository configuration? [y]/n y . . . Do you want to run the Netezza Analytics cartridge installer now? (y/n): y Do you want to do an Express (e) installation or a Custom (c) installation (e/c): e Confirm that the following components should be installed. 1) MapReduce: YES 2) Matrix: YES 3) IBM Netezza In-database Analytics: YES 4) Spatial: YES (ESRI) Do you want to install the selected components? Enter "y" to continue, "x" to exit or any other key to be prompted to change your selection: y ``` -------------------------------- ### Run installation script Source: https://www.ibm.com/docs/en/netezza?topic=overview-deploying-google-cloud-platform From the install directory, run the installation script. The script validates configuration and CIDR ranges, checks required GCP APIs, creates infrastructure bucket, uploads files, creates Infrastructure Manager deployment, executes it, and monitors progress. Provides real-time monitoring with status updates every 10 seconds. Deployment typically takes 30-60 minutes. ```bash cd install python3 deploy_dataplane.py ``` -------------------------------- ### Example output of oc get mcp Source: https://www.ibm.com/docs/en/netezza?topic=restore-configuring-multipathconf-netezza-performance-server-connector-nodes Example output of 'oc get mcp' showing the nps-shared pool with UPDATING=True and the node role changed to SchedulingDisabled. ```bash oc get mcp NAME CONFIG UPDATED UPDATING DEGRADED MACHINECOUNT READYMACHINECOUNT UPDATEDMACHINECOUNT DEGRADEDMACHINECOUNT AGE master rendered-master-d8537132ffb6d789ce8b2a7257833bf9 True False False 3 3 3 0 14d nps-shared rendered-nps-shared-053d2105bc50eeb67b4cb50614e9a0da False True False 3 0 0 0 8d unset rendered-unset-442d08db52ce65c62d60b906718744f6 True False False 0 0 0 0 14d worker rendered-worker-442d08db52ce65c62d60b906718744f6 True False False 3 3 3 0 14d ``` -------------------------------- ### Example: Describe pod and output Source: https://www.ibm.com/docs/en/netezza?topic=server-accessing-storage-inside-backup-restore-pods Example command and its output showing the mounts available in the pod bnr-local-storage-server-0. ```bash oc describe pod bnr-local-storage-server-0 -n nps-1 ``` ```text Containers: bnr-storage-cont: Image: image-registry.openshift-image-registry.svc:5000/nz-repo/storage-server:release-11.2.2.2 Port: Host Port: Limits: cpu: 4 memory: 20Gi Requests: cpu: 4 memory: 8Gi Environment: POD_NAMESPACE: aru-bnr-test (v1:metadata.namespace) POD_UID: (v1:metadata.uid) POD_NODENAME: (v1:spec.nodeName) **Mounts:** /bnrdata from bnr-data (rw) /pod/local0 from bnr-storage-vol-0 (rw) ``` -------------------------------- ### Select Install option in IBM Installation Manager Source: https://www.ibm.com/docs/en/netezza?topic=backups-installing-tivoli-storage-manager-tsm-server-linux Selects option 1 to start installing the software packages in IBM Installation Manager. ```text =====> IBM Installation Manager Select: 1. Install - Install software packages **-----> 1** ``` -------------------------------- ### Example output of oc get mcp Source: https://www.ibm.com/docs/en/netezza?topic=started-dedicating-ip-addresses-netezza-performance-server-instances Example output from oc get mcp showing the nps-shared pool with UPDATED=False and UPDATING=True, indicating the pool is not yet updated. ```bash e1n1# oc get mcp NAME CONFIG UPDATED **UPDATING** DEGRADED MACHINECOUNT READYMACHINECOUNT UPDATEDMACHINECOUNT DEGRADEDMACHINECOUNT AGE master rendered-master-aec3a54834de8715e079c49ea9a3a8c7 True False False 3 3 3 0 84d nps-shared rendered-nps-shared-e5216ea81dadff7f261afc5b1f3eaff7 False **True** False 4 0 0 0 84d unset rendered-unset-5e88a8717e36c1156f7779ecadeb9c5c True False False 1 1 1 0 84d worker rendered-worker-5e88a8717e36c1156f7779ecadeb9c5c True False False 0 0 0 0 84d ``` -------------------------------- ### Example output of nzinstall display Source: https://www.ibm.com/docs/en/netezza?topic=server-deploying-netezza-performance-1122x Example output of the nzinstall display command, showing deployed instances with their network devices, host nodes, and SPU nodes. ```bash e1n1# nzinstall display Log file: /var/log/appliance/application/support-tools/nzinstall-20210824082755.log NPS namespace : nps-1 -- network device : fbond.4084 -- host nodes : ['e1n4', 'e2n1', 'e2n2', 'e2n3', 'e2n4'] -- SPU nodes : ['e3n1', 'e3n2', 'e3n3', 'e3n4'] NPS namespace : nps-2 -- network device : fbond.4085 -- host nodes : ['e1n4', 'e2n1', 'e2n2', 'e2n3', 'e2n4'] -- SPU nodes : ['e4n1', 'e4n2', 'e4n3', 'e4n4'] ``` -------------------------------- ### Run install.sh to start TSM installation Source: https://www.ibm.com/docs/en/netezza?topic=backups-installing-tivoli-storage-manager-tsm-server-linux Runs the install.sh script to start the TSM server installation. The second block shows the command as it appears at the root shell prompt. ```bash ./install.sh ``` ```bash [root@~ ~]# ./install.sh ``` -------------------------------- ### Example: precheck and deployment commands Source: https://www.ibm.com/docs/en/netezza?topic=overview-deployment-procedure Example commands for running precheck and deployment operations using the script at /opt/nps/nzswsetup.py. Precheck must be executed before deployment. ```bash python3 /opt/nps/nzswsetup.py --operation=precheck python3 /opt/nps/nzswsetup.py --operation=deployment ``` -------------------------------- ### Start replication for nodes with ./nzdr replication start Source: https://www.ibm.com/docs/en/netezza?topic=30xx-setting-up-replication-between-systems Use these commands to start replication for nodes that are not active. The example shows starting replication for CPDS-A and CPDS-B. ```text [nz@e1n1-npshost nrs]$ ./nzdr replication start --node-name CPDS-A Successfully started replication scheduler on node CPDS-A. [nz@e1n1-npshost nrs]$ ./nzdr replication start --node-name CPDS-B Successfully started replication scheduler on node CPDS-B. ``` -------------------------------- ### Verify package installation with nzIsPackageInstalled() Source: https://www.ibm.com/docs/en/netezza?topic=library-cran Checks whether a package is installed on Netezza using nzIsPackageInstalled(). The example verifies the installation of the bitops package. ```R nzIsPackageInstalled(bitops) ``` -------------------------------- ### Install Packages with I Source: https://www.ibm.com/docs/en/netezza?topic=sutsmcb-installing-tivoli-storage-manager-tsm-server-linux Type 'I' to install the packages. The output shows the installation summary with the packages to be installed and the progress bar. ```text =====> IBM Installation Manager> Install> Prerequisites> Shared Directory> Location> Features> Custom panels> Summary Target Location: Package Group Name : IBM Spectrum Protect Installation Directory : /opt/tivoli/tsm Shared Resources Directory : /opt/IBM/IBMIMShared Translations: English Packages to be installed: IBM Spectrum Protect server 8.1.10.20200521_1523 IBM Spectrum Protect languages 8.1.10.20200521_1521 IBM Spectrum Protect storage agent 8.1.10.20200521_1521 IBM Spectrum Protect device driver 8.1.10.20200521_1522 IBM Spectrum Protect Operations Center 8.1.10000.20200519_1120 Options: G. Generate an Installation Response File B. Back, I. Install, C. Cancel **-----> [I]** 25% 50% 75% 100% ------------------|------------------|------------------|------------------| ............................................................................ ``` -------------------------------- ### epochStart() Source: https://www.ibm.com/docs/en/netezza?topic=cplusnzaetimestampfielddita-static-public-member-functions-documentation Gets the encoded epoch start. Returns the encoded epoch start as a 64-bit integer. ```APIDOC ## epochStart() ### Description Gets the encoded epoch start. ### Method epochStart() ### Returns - **int64_t** - The encoded epoch start. ``` -------------------------------- ### Example cd to version directory Source: https://www.ibm.com/docs/en/netezza?topic=later-redeploying-container-11302-if1 Example of the cd command using a specific version directory (v11.3.0.X). Adjust the version to match your environment. ```bash cd /opt/ibm/appliance/storage/ips/ips1_deployment/v11.3.0.X ```