### IOCP Deck for Multiple 3592-C07/TS1120 Controllers

Source: https://www.ibm.com/docs/en/3592-rackmount/index_topic=pc-host-configuration-3592-c07-ts1120-3592-c06-controller

This IOCP deck configuration is used by the host to install multiple 3592-C07 or TS1120 (C06) Controllers (DOPEY, GRUMPY, DOC). It defines control units, I/O devices, and partition assignments for each controller, specifying FICON CHPID assignments and switch settings.

```assembler
***********************************************************************
* ELC010 CU'S
* DOPEY ADDRESS 700.16 LIBPORT ID 1 FICON CHPIDS A1,A5,D2,D6 SW 51
* GRUMPY ADDRESS 710.16 LIBPORT ID 2 FICON CHPIDS A1,A5 SW 51
* DOC ADDRESS 720.16 LIBPORT ID 3 FICON CHPIDS D2,D6 SW 51
***********************************************************************
*
*DOPEY
CNTLUNIT CUNUMBR=1A10,PATH=(CSS(1),A1,A5,D2,D6), X
LINK=(CSS(1),2F,5F,8F,BF), X
UNITADD=((00,16)),UNIT=3590
*$HCDC$ DESC='ELC010 DOPEY C07 LAB 1520'
TAPE0700 IODEVICE ADDRESS=(0700,16),CUNUMBR=(1A10), X
UNITADD=00,UNIT=3590, X
PART=(CSS(1),PC5,PC7,PC8,PCB,PCC,PCH,VMT13)
*
*GRUMPY
CNTLUNIT CUNUMBR=2A10,PATH=(CSS(1),A1,A5), X
LINK=(CSS(1),30,60), X
UNITADD=((00,16)),UNIT=3590
*$HCDC$ DESC='ELC010 GRUMPY C07 LAB 1520'
TAPE0710 IODEVICE ADDRESS=(0710,16),CUNUMBR=(2A10), X
UNITADD=00,UNIT=3590, X
PART=(CSS(1),PC5,PC7,PC8,PCB,PCC,PCH,VMT13)
*
*DOC
CNTLUNIT CUNUMBR=1D20,PATH=(CSS(1),D2,D6), X
LINK=(CSS(1),88,CA), X
UNITADD=((00,16)),UNIT=3590
*$HCDC$ DESC='ELC010 DOC C07 LAB 1520'
TAPE0720 IODEVICE ADDRESS=(0720,16),CUNUMBR=(1D20), X
UNITADD=00,UNIT=3590, X
PART=(CSS(1),PC5,PC7,PC8,PCB,PCC,PCH,VMT13)
*
```

--------------------------------

### IOCP Deck for 3590 A60 and TS1120 (C06) Controllers

Source: https://www.ibm.com/docs/en/3592-rackmount/index_topic=pc-host-configuration-3592-c07-ts1120-3592-c06-controller

This IOCP deck configuration installs a 3590 Model A60 controller ('LAUREL') and a TS1120 (C06) Controller ('HARDY'), both with 3592 Model J1A tape drives. It details control unit parameters, I/O device definitions, and partition assignments, including FICON, ESCON, and FICON-ESCON converter path options.

```assembler
*******************************************************************             Col 80
* 3592     DRIVES:  A60
*               FICON   F4,F5 SW=20                                            
*               ESCON 4D,4E SW=BB    
*               LAUREL A60 SERNO 006                                             
*******************************************************************
LAUREL CNTLUNIT  CUNUMBR=0F41,PATH=(4D,4E,F4,F5),                                 X
               UNITADD=((00,16)),LINK=(94,94,06,07),                              X
               UNIT=3590                                                
TAPE0780 IODEVICE ADDRESS=(780,16),UNIT=3590,CUNUMBR=(0F41),                      X
               UNITADD=00           
******************************************************************* 
* 3592 DRIVES:   C06    
*            FICON NATIVE EC,ED                                      
*            ESCON  14,15,16,17   
*            FICON FCV   F2,F3,FE,FF  (FICON-ESCON CONVERTER) 
*            HARDY  C06  SERNO 247                                         
******************************************************************* 
HARDY CNTLUNIT  CUNUMBR=14C,PATH=(F2,F3,FE,FF,EC),                                X
               UNITADD=((00,16)),LINK=(06,0E,16,1E,32),                           X
               UNIT=3590                                                
TAPE07C0 IODEVICE ADDRESS=(07C0,16),UNIT=3590,CUNUMBR=(14C),                      X
               UNITADD=00 

```