### Implement Start Method in Plugin

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-150D5213-1015-4361-AB6B-6683362F9AB7

Example implementation of the Start method within a plugin to handle standards checking.

```VB.NET
Public Sub PlugIn_Start(ByVal pStartError As AcStError) _
                        Implements IAcStPlugin2.Start

    ' pStartError is not an actual programming error that needs to be handled,
    ' but a reference to an object that does not match the standards
    ' in the DWS file.

    ' If pStartError is an object, checking should start
    ' from that error, not the beginning of the current context.
    If IsNothing(pStartError) = False Then

        ' Get the ObjectId of the first object to check
        Dim badId As Long = pStartError.BadObjectId

        ' Find the index for ObjectId in the context list stored in m_objIDArray
        For m_curIndex = 0 To m_ContextList.Count - 1
            If m_ContextList.Item(m_curIndex) = badId Then
                m_curIndex = m_curIndex - 1
                PlugIn_Next()
            End If
        Next
    Else
        ' A valid AcStError object was not passed to the method.
        ' Checking should start at the beginning of the context list.
        m_curIndex = -1
        PlugIn_Next()
    End If
End Sub
```

```C#
public void PlugIn_Start(AcStError pStartError)
{
    // pStartError is not an actual programming error that needs to be handled,
    // but a reference to an object that does not match the standards
    // in the DWS file.

    // If pStartError is an object, checking should start
    // from that error, not the beginning of the current context.
    if ((pStartError == null) == false)
    {
        // Get the ObjectId of the first object to check
        long badId = pStartError.BadObjectId;

        // Find the index for ObjectId in the context list stored in m_objIDArray
        for (m_curIndex = 0; m_curIndex <= m_ContextList.Count - 1; m_curIndex++)
        {
            if (Convert.ToInt64(m_ContextList.GetItem(m_curIndex)) == badId)
            {
                m_curIndex = m_curIndex - 1;
                PlugIn_Next();
            }
        }
    }
    else
    {
        // A valid AcStError object was not passed to the method.
        // Checking should start at the beginning of the context list.
        m_curIndex = -1;
        PlugIn_Next();
    }
}

void IAcStPlugin2.Start(AcStError pStartError)
{
    PlugIn_Start(pStartError);
}
```

--------------------------------

### Initialize Command Version Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-RefGuide-acedGetCommandVersion

Example usage showing the initialization of a command version.

```cpp
Adesk::UInt8 commandVersion = acedInitCommandVersion();
```

--------------------------------

### Get or Create Excel Application Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-7AFF597F-D630-4489-8349-94EF67CCE1F0

Example demonstrating the retrieval or creation of an Excel application object.

```AutoLISP
(vlax-get-or-create-object "Excel.Application")
#<VLA-OBJECT _Application 0017bb5c>
```

--------------------------------

### Implement PlugIn_Start using BadObjectId

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-00013936-2FF5-4683-A2E0-E9C1684D526D

Example implementation of the PlugIn_Start method using the BadObjectId property to determine the starting point for standards checking.

```vbnet
Public Sub PlugIn_Start(ByVal pStartError As AcStError) _
                        Implements IAcStPlugin2.Start

    ' If pStartError is an object, checking should start
    ' from that error, not the beginning of the current context.
    If IsNothing(pStartError) = False Then

        ' Get the ObjectId of the first object to check
        Dim badId As Long = pStartError.BadObjectId

        ' Find the index for ObjectId in the context list stored in m_objIDArray
        For m_curIndex = 0 To m_ContextList.Count - 1
            If m_ContextList.Item(m_curIndex) = badId Then
                m_curIndex = m_curIndex - 1
                PlugIn_Next()
            End If
        Next
    Else
        ' A valid AcStError object was not passed to the method.
        ' Checking should start at the beginning of the context list.
        m_curIndex = -1
        PlugIn_Next()
    End If
End Sub
```

```csharp
public void PlugIn_Start(AcStError pStartError)
{
    // If pStartError is an object, checking should start
    // from that error, not the beginning of the current context.
    if ((pStartError == null) == false)
    {
        // Get the ObjectId of the first object to check
        long badId = pStartError.BadObjectId;

        // Find the index for ObjectId in the context list stored in m_objIDArray
        for (m_curIndex = 0; m_curIndex <= m_ContextList.Count - 1; m_curIndex++)
        {
            if (Convert.ToInt64(m_ContextList.GetItem(m_curIndex)) == badId)
            {
                m_curIndex = m_curIndex - 1;
                PlugIn_Next();
            }
        }
    }
    else
    {
        // A valid AcStError object was not passed to the method.
        // Checking should start at the beginning of the context list.
        m_curIndex = -1;
        PlugIn_Next();
    }
}
```

--------------------------------

### SetupForAudit Implementation Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-0F6EBB70-088B-407F-9B29-1B6507083E4A

Example demonstrating how to retrieve ModelSpaceProxy and PaperSpaceProxy within an IAcStPlugin2.SetupForAudit implementation.

```vbnet
Public Sub SetupForAudit(ByVal pDb As AcadDatabase, _
                         ByVal szPathName As String, _
                         ByVal stdNameArray As Object, _
                         ByVal stdPathArray As Object, _
                         ByVal stdDbArray As Object) _
                               Implements IAcStPlugin2.SetupForAudit

    ' Number of graphical objects contained in model space and paper space of
    ' the database being checked
    If Not IsNothing(pDb) Then
        Dim msProxy As IAcStBlockProxy = m_pManager.ModelSpaceProxy(pDb)
        Dim psProxy As IAcStBlockProxy = m_pManager.PaperSpaceProxy(pDb)

        Debug.Print("Object counts " & vbLf & "Model: " & msProxy.Count.ToString() &
                    vbLf & "Paper: " & psProxy.Count.ToString())
    End If
End Sub
```

```csharp
public void SetupForAudit(AcadDatabase pDb, string szPathName, object stdNameArray, 
                          object stdPathArray, object stdDbArray)
{
    // Number of graphical objects contained in model space and paper space of
    // the database being checked
    if (pDb != null)
    {
        IAcStBlockProxy msProxy = m_pManager.get_ModelSpaceProxy(pDb);
        IAcStBlockProxy psProxy = m_pManager.get_PaperSpaceProxy(pDb);

        Debug.Print("Object counts \nModel: " + msProxy.Count.ToString() +
                    "\nPaper: " + psProxy.Count.ToString());
    }
}
```

--------------------------------

### Brep.GetShellsStartingFrom(Shell startFrom)

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-ManagedRefGuide-Autodesk_AutoCAD_BoundaryRepresentation_Brep_GetShellsStartingFrom_Shell

Returns a collection of shells starting from a starting point.

```APIDOC
## Brep.GetShellsStartingFrom

### Description
Returns a collection of shells starting from a starting point.

### Syntax
**C#**
public BrepShellCollection GetShellsStartingFrom(Shell startFrom);

**Visual Basic**
Public Function GetShellsStartingFrom(startFrom As Shell) As BrepShellCollection

### Parameters
- **startFrom** (Shell) - Required - Input shell to start collecting from

### Returns
- **BrepShellCollection** - A collection of shells starting from the specified input shell.
```

--------------------------------

### Start a transaction

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-RefGuide-actrTransactionManager

Example usage of the actrTransactionManager macro to initiate a transaction.

```cpp
actrTransactionManager->startTransaction();
```

--------------------------------

### Registering Help for a Command

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-RefGuide-acedSetFunHelp_ACHAR__ACHAR__ACHAR__int

Example demonstrating how to register help for a custom function immediately after defining it with acedDefun.

```cpp
int funcload()
{
    char* exfun = "c:sld2ps";
    if (acedDefun(exfun, 0) != RTNORM)
        return 0;
    if (acedSetFunHelp(exfun, "sld2ps.chm" "sld2ps", 0) != RTNORM)
        return 0;
    return 1;
}
```

--------------------------------

### Brep.GetComplexsStartingFrom(Complex startFrom)

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-ManagedRefGuide-Autodesk_AutoCAD_BoundaryRepresentation_Brep_GetComplexsStartingFrom_Complex

Returns a collection of complexes starting from a starting point.

```APIDOC
## Brep.GetComplexsStartingFrom

### Description
Returns a collection of complexes starting from a starting point.

### Signature
`public BrepComplexCollection GetComplexsStartingFrom(Complex startFrom)`

### Parameters
- **startFrom** (Complex) - Required - Input complex to start collecting from

### Returns
- **BrepComplexCollection** - A collection of complexes starting from the specified point.
```

--------------------------------

### ImportProfile Method Examples

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-7C7D0F4F-06BE-400E-9E28-14E02AA9A93A

Examples demonstrating how to import a profile using VBA and Visual LISP.

```VBA
Sub Example_ImportProfile()
    ' This example imports a profile.
    ' NOTE: A dummy profile name is used so that your existing
    ' profiles are not changed.
    
    Dim preferences As AcadPreferences
    Dim strProfileToImport As String
    
    Set preferences = ThisDrawing.Application.preferences
    
    ' Specify the profile to delete.
    strProfileToImport = "TestProfile"
    
    ' Delete the profile
    ' The call will fail if "TestProfile" does not exist
    On Error GoTo Error
    preferences.Profiles.ImportProfile strProfileToImport, "TESTPROFILE.ARG", True
    
    Exit Sub
    
Error:
    MsgBox "ImportProfile of " & strProfileToImport & " failed. " & Err.Description, , "ImportProfile Example"
        
End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_ImportProfile()
    ;; This example imports a profile.
    ;; NOTE: A dummy profile name is used so that your existing
    ;; profiles are not changed.
    (setq acadObj (vlax-get-acad-object))
    (setq preferences (vla-get-Preferences acadObj))
    
    ;; Specify the profile to import.
    (setq strProfileToImport "TestProfile")
    (vla-ImportProfile (vla-get-Profiles preferences) strProfileToImport (findfile "TESTPROFILE.ARG") :vlax-true)
)
```

--------------------------------

### Create a Sphere Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-A80673FC-C26A-4CC8-9893-219154FFE59F

Examples demonstrating the creation of a sphere in model space and updating the viewport.

```VBA
Sub Example_AddSphere()
    ' This example creates a sphere in model space.
    
    Dim sphereObj As Acad3DSolid
    Dim centerPoint(0 To 2) As Double
    Dim radius As Double
    
    centerPoint(0) = 5#: centerPoint(1) = 5#: centerPoint(2) = 0#
    radius = 5#
    Set sphereObj = ThisDrawing.ModelSpace.AddSphere(centerPoint, radius)
        
     ' Change the viewing direction of the viewport
    Dim NewDirection(0 To 2) As Double
    NewDirection(0) = -1: NewDirection(1) = -1: NewDirection(2) = 1
    ThisDrawing.ActiveViewport.direction = NewDirection
    ThisDrawing.ActiveViewport = ThisDrawing.ActiveViewport
    ZoomAll

End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_AddSphere()
    ;; This example creates a sphere in model space.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the solid sphere
    (setq centerPoint (vlax-3d-point 5 5 0)
          radius 5)
  
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq sphereObj (vla-AddSphere modelSpace centerPoint radius))
        
    ;; Change the viewing direction of the viewport
    (setq NewDirection (vlax-3d-point -1 -1 1))
    (setq activeViewport (vla-get-ActiveViewport doc))
    (vla-put-Direction activeViewport NewDirection)
    (vla-put-ActiveViewport doc activeViewport)
    (vla-ZoomAll acadObj)
)
```

--------------------------------

### Brep.GetFacesStartingFrom(Face startFrom)

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-ManagedRefGuide-Autodesk_AutoCAD_BoundaryRepresentation_Brep_GetFacesStartingFrom_Face

Returns a collection of faces starting from a starting point.

```APIDOC
## Brep.GetFacesStartingFrom

### Description
Returns a collection of faces starting from a starting point.

### Syntax
#### C#
public BrepFaceCollection GetFacesStartingFrom(Face startFrom);

#### Visual Basic
Public Function GetFacesStartingFrom(startFrom As Face) As BrepFaceCollection

### Parameters
- **startFrom** (Face) - Required - Input face to start collecting from

### Returns
- **BrepFaceCollection** - A collection of faces starting from the specified face.
```

--------------------------------

### RunMacro Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-638E14CA-798C-42BC-8F2B-5E9D6952C707

Examples demonstrating how to load a DVB file, run a macro, and unload the file.

```VBA
Sub Example_RunMacro()
    ' This example loads a DVB file and runs a macro
    ' contained in the file using the RunMacro method.
    '
    ' This example uses a DVB file named drawline.dvb.
    ' You should change the example to use a file on your computer.
    '
    ' * Note: If you open a DVB file and then run the example to load it, there will be an error
    ' when the DVB file is unloaded.

    Dim FileName As String
    
    FileName = "c:\drawline.dvb"
    
    ' Load a sample VBA project DVB file
    LoadDVB FileName
    
    ' Run the drawline sample macro
    RunMacro "Module1.Drawline"
    
    ' Unload the drawline VBA project DVB file now that we are done
    UnloadDVB FileName
    
    MsgBox "The DVB file has been run!"

End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_RunMacro()
    ;; This example loads a DVB file and runs a macro
    ;; contained in the file using the RunMacro method.
    ;;
    ;; This example uses a DVB file named drawline.dvb.
    ;; You should change the example to use a file on your computer.
    ;;
    ;; * Note: If you open a DVB file and then run the example to load it, there will be an error
    ;; when the DVB file is unloaded.
    (setq acadObj (vlax-get-acad-object))

    (setq fileName (findfile ".\\Sample\\VBA\\drawline.dvb"))
    
    ;; Load a sample VBA project DVB file
    (vla-LoadDVB acadObj fileName)
    
    ;; Run the drawline sample macro
    (vla-RunMacro acadObj "Module1.Drawline")
    
    ;; Unload the drawline VBA project DVB file now that we are done
    (vla-UnloadDVB acadObj fileName)
    
    (alert "The DVB file has been run!")
)
```

--------------------------------

### Determine Curve Start Parameter Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-854C3C4D-1305-4920-9E42-D9ACB9E4363C

Example usage of vlax-curve-getStartParam to determine the start parameter of an ellipse object.

```AutoLISP
(vlax-curve-getstartparam ellipseObj)
0.0
```

--------------------------------

### Example Startup Script Content

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-5510017F-4656-478F-BD4C-AB6B1998BF55

A sample script file named _setup.scr_ that configures grid, linetype scale, and layer settings.

```text
grid on 
ltscale 3.0 
layer set 0 color red 0
```

--------------------------------

### EndAngle Property Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-5F2762C5-A24D-4A35-92F3-AC31311BE503

Examples demonstrating how to create an elliptical arc by setting the start and end angles.

```VBA
Sub Example_EndAngle()
    ' This example creates an ellipse and enters the start and
    ' end angles to create an elliptical arc.
    Dim ellObj As AcadEllipse
    Dim majAxis(0 To 2) As Double
    Dim center(0 To 2) As Double
    Dim radRatio As Double
    
    ' Create an ellipse in model space
    center(0) = 5#: center(1) = 5#: center(2) = 0#
    majAxis(0) = 10: majAxis(1) = 20#: majAxis(2) = 0#
    radRatio = 0.3
    Set ellObj = ThisDrawing.ModelSpace.AddEllipse(center, majAxis, radRatio)
    
    'Enter a start angle of 45 degrees, and an end angle of 270 degrees
    ellObj.startAngle = 45 * (3.14 / 180)
    ellObj.endAngle = 270 * (3.14 / 180)
    ZoomAll
    MsgBox "This ellipse has a start angle of " & ellObj.startAngle * (180 / 3.14) & " and the end angle of " & ellObj.endAngle * (180 / 3.14) & " degrees.", vbInformation, "EndAngle Example"
End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_EndAngle()
    ;; This example creates an ellipse and enters the start and
    ;; end angles to create an elliptical arc.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Create an ellipse in model space
    (setq center (vlax-3d-point 5 5 0)
          majAxis (vlax-3d-point 10 20 0)
          radRatio 0.3)
  
    (setq modelSpace (vla-get-ModelSpace doc))  
    (setq ellObj (vla-AddEllipse modelSpace center majAxis radRatio))
    
    ;; Enter a start angle of 45 degrees, and an end angle of 270 degrees
    (vla-put-StartAngle ellObj (* 45 (/ 3.14 180)))
    (vla-put-EndAngle ellObj (* 270 (/ 3.14 180)))
    (vla-ZoomAll acadObj)
    (alert (strcat "This ellipse has a start angle of " (rtos (* (vla-get-StartAngle ellObj) (/ 180 3.14)) 2) " and the end angle of " (rtos (* (vla-get-EndAngle ellObj) (/ 180 3.14)) 2) " degrees."))
)
```

--------------------------------

### Shell.GetFacesStartingFrom(Face startFrom)

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-ManagedRefGuide-Autodesk_AutoCAD_BoundaryRepresentation_Shell_GetFacesStartingFrom_Face

Returns a collection of faces starting from a starting point.

```APIDOC
## Shell.GetFacesStartingFrom

### Description
Returns a collection of faces starting from a starting point.

### Signature
`public ShellFaceCollection GetFacesStartingFrom(Face startFrom)`

### Parameters
- **startFrom** (Face) - Required - Input face to start collecting from

### Returns
- **ShellFaceCollection** - A collection of faces starting from the specified face.
```

--------------------------------

### Example: Setting StartParameter

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-E7C085E0-22CA-4E96-83A5-F8672277340E

Examples demonstrating how to create an ellipse and set its start and end parameters to define an arc.

```VBA
Sub Example_StartParameter()
    ' This example creates an ellipse and enters the start and
    ' end parameters to create an elliptical arc.
    Dim ellObj As AcadEllipse
    Dim majAxis(0 To 2) As Double
    Dim center(0 To 2) As Double
    Dim radRatio As Double
    
    ' Create an ellipse in model space
    center(0) = 5#: center(1) = 5#: center(2) = 0#
    majAxis(0) = 10: majAxis(1) = 20#: majAxis(2) = 0#
    radRatio = 0.3
    Set ellObj = ThisDrawing.ModelSpace.AddEllipse(center, majAxis, radRatio)
    
    ' Enter a start parameter of 1.57, and an end parameter of 6.28
    ellObj.StartParameter = 1.57
    ellObj.EndParameter = 6.28
    ZoomAll
    
    ' Find the start and end parameters for the ellipse
    MsgBox "The ellipse has a start parameter of " & ellObj.StartParameter & " and an end parameter of " & ellObj.EndParameter, vbInformation, "StartParameter Example"
End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_StartParameter()
    ;; This example creates an ellipse and enters the start and
    ;; end parameters to create an elliptical arc.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Create an ellipse in model space
    (setq center (vlax-3d-point 5 5 0)
          majAxis (vlax-3d-point 10 20 0)
          radRatio 0.3)
  
    (setq modelSpace (vla-get-ModelSpace doc))  
    (setq ellObj (vla-AddEllipse modelSpace center majAxis radRatio))
    
    ;; Enter a start parameter of 1.57, and an end parameter of 6.28
    (vla-put-StartParameter ellObj 1.57)
    (vla-put-EndParameter ellObj 6.28)
    (vla-ZoomAll acadObj)
    
    ;; Find the start and end parameters for the ellipse
    (alert (strcat "The ellipse has a start parameter of " (rtos (vla-get-StartParameter ellObj) 2) " and an end parameter of " (rtos (vla-get-EndParameter ellObj) 2)))
)
```

--------------------------------

### Create a directory using vl-mkdir

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-02D5CC9E-9394-4630-AE14-133F5F03D7B1

Examples demonstrating directory creation on different operating systems.

```AutoLISP
(vl-mkdir "c:\\mydirectory")
```

```AutoLISP
(vl-mkdir "/mydirectory")
```

--------------------------------

### SetView Method Examples

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-A56246A7-65B5-4B62-9AF4-BD2FDC27FF1C

Examples demonstrating how to create a new view, define its properties, and apply it to the active viewport.

```vba
Sub Example_SetView()
    ' This example creates a new view.
    ' It then changes the active viewport to
    ' the newly created view.
    
    ' Create a new view
    Dim viewObj As AcadView
    Set viewObj = ThisDrawing.Views.Add("TESTVIEW")
    
    ' Set the view characteristics
    viewObj.center(0) = 374: viewObj.center(1) = 313
    viewObj.Width = 450
    viewObj.Height = 354
    
    ' Get the current active viewport
    Dim viewportObj As AcadViewport
    Set viewportObj = ThisDrawing.ActiveViewport
    MsgBox "Change to the saved view.", , "SetView Example"
       
    ' Set the view in the viewport
    viewportObj.SetView viewObj
    ThisDrawing.ActiveViewport = viewportObj
        
    ThisDrawing.Regen True
    
End Sub
```

```visual-lisp
(vl-load-com)
(defun c:Example_SetView()
    ;; This example creates a new view.
    ;; It then changes the active viewport to
    ;; the newly created view.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))

    ;; Create a new view
    (setq viewObj (vla-Add (vla-get-Views doc) "TESTVIEW"))
    
    ;; Set the view characteristics
    (setq centerPoint (vlax-make-safearray vlax-vbDouble '(0 . 1)))
    (vlax-safearray-fill centerPoint '(374 313))
    (vla-put-Center viewObj centerPoint)
    (vla-put-Width viewObj 450)
    (vla-put-height viewObj 354)
    
    ; Get the current active viewport
    (setq viewportObj (vla-get-ActiveViewport doc))
    (alert "Change to the saved view.")
       
    ;; Set the view in the viewport
    (vla-SetView viewportObj viewObj)
    (vla-put-ActiveViewport doc viewportObj)
        
    (vla-Regen doc :vlax-true)
)
```

--------------------------------

### PlotToDevice Method Examples

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-55FEED17-E697-4CF3-B9C3-6ACCF060672F

Examples demonstrating how to configure the layout and initiate a plot to a device using VBA and Visual LISP.

```VBA
Sub Example_PlotToDevice()
    ' This example sends a plot of the current drawing
    ' to the default device for your system.
    
    ThisDrawing.ActiveLayout.ConfigName = "DWF6 ePlot.pc3"
    
    ThisDrawing.Plot.PlotToDevice
    
End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_PlotToDevice()
    ;; This example sends a plot of the current drawing
    ;; to the current device.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))

    (vla-put-ConfigName (vla-get-ActiveLayout doc) "DWF6 ePlot.pc3")

    (vla-PlotToDevice (vla-get-Plot doc))
)
```

--------------------------------

### Extended Entity Definition Data Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-A2A628B0-3699-4740-A215-C560E7242F63

Example of extended data (xdata) structure following an entity definition, starting with the 1001 group code.

```text
1001
AME_SOL
1002
{
1070
 0
1071
 1.95059E+06
1070
 519
1010
2.54717
1020
2.122642
1030
2.049201
1005
ECD
1005
EE9
1005
0
1040
0.0
1040
1.0
1000
MILD_STEEL
```

--------------------------------

### Read and Write Registry Examples

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-0B9E26CF-2410-482E-B568-7FE05B9F013C

Examples demonstrating reading from a registry key, writing data to it, and reading the updated value.

```AutoLISP
(vl-registry-read "HKEY_CURRENT_USER\Test")
nil

(vl-registry-write "HKEY_CURRENT_USER\Test" "" "test data")
"test data"

(vl-registry-read "HKEY_CURRENT_USER\Test")
"test data"
```

--------------------------------

### AssocArrayPolarParameters.StartAngle

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-ManagedRefGuide-Autodesk_AutoCAD_DatabaseServices_AssocArrayPolarParameters_StartAngle

Gets or sets the start angle for the polar array parameters in degrees.

```APIDOC
## Property: StartAngle

### Description
Gets or sets the start angle of the polar array. The value is measured in degrees.

### Signature
- **C#**: public double StartAngle
- **Visual Basic**: Public Property StartAngle() As double

### Conditions
- **Access**: Read / Write
```

--------------------------------

### ScaleEntity Method Examples

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-F5A968AB-47BC-4D86-A04D-5985FF217596

Examples demonstrating how to create a polyline and apply the ScaleEntity method to resize it.

```VBA
Sub Example_ScaleEntity()
    ' This example creates a lightweight polyline
    ' and then scales that polyline.
    
    ' Create the polyline
    Dim plineObj As AcadLWPolyline
    Dim points(0 To 11) As Double
    points(0) = 1: points(1) = 2
    points(2) = 1: points(3) = 3
    points(4) = 2: points(5) = 3
    points(6) = 3: points(7) = 3
    points(8) = 4: points(9) = 4
    points(10) = 4: points(11) = 2
    Set plineObj = ThisDrawing.ModelSpace.AddLightWeightPolyline(points)
    plineObj.Closed = True
    ZoomAll
            
    MsgBox "Scale the polyline by 0.5", , "ScaleEntity Example"
    
    ' Define the scale
    Dim basePoint(0 To 2) As Double
    Dim scalefactor As Double
    basePoint(0) = 4: basePoint(1) = 4.25: basePoint(2) = 0
    scalefactor = 0.5
    
    ' Scale the polyline
    plineObj.ScaleEntity basePoint, scalefactor
    
    ZoomAll
    MsgBox "Scale completed.", , "ScaleEntity Example"
    
End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_ScaleEntity()
    ;; This example creates a lightweight polyline
    ;; and then scales that polyline.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))

    ;; Create the polyline
    (setq points (vlax-make-safearray vlax-vbDouble '(0 . 11)))
    (vlax-safearray-fill points '(1 2
                                  1 3
                                  2 3
                                  3 3
                                  4 4
                                  4 2
                                 )
    )

    (setq modelSpace (vla-get-ModelSpace doc))
    (setq plineObj (vla-AddLightWeightPolyline modelSpace points))
    (vla-put-Closed plineObj :vlax-true)
    (vla-ZoomAll acadObj)
            
    (alert "Scale the polyline by 0.5")
    
    ;; Define the scale
    (setq basePoint (vlax-3d-point 4 4.25 0)
          scalefactor 0.5)
    
    ;; Scale the polyline
    (vla-ScaleEntity plineObj basePoint scalefactor)
    
    (vla-ZoomAll acadObj)
    (alert "Scale completed.")
)
```

--------------------------------

### Add Method Examples

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-6DB6EFDF-C393-4BD0-9E59-A57BCDA3456F

Examples demonstrating the creation of various drawing objects by adding them to their respective collections.

```APIDOC
## Add Method Usage

### Description
The Add method is used to create and append new objects to specific collections within the current drawing, such as Blocks, Layers, or Groups.

### Examples

#### Add Block
```vba
Set blockObj = ThisDrawing.Blocks.Add(insertionPnt, "New_Block")
```

#### Add Dictionary
```vba
Set dictObj = ThisDrawing.Dictionaries.Add("New_Dictionary")
```

#### Add Dimension Style
```vba
Set DimStyleObj = ThisDrawing.DimStyles.Add("New_Dimstyle")
```

#### Add Group
```vba
Set groupObj = ThisDrawing.Groups.Add("New_Group")
```

#### Add Layer
```vba
Set layerObj = ThisDrawing.Layers.Add("New_Layer")
```

#### Add Registered Application
```vba
Set RegAppObj = ThisDrawing.RegisteredApplications.Add("New_RegApp")
```
```

--------------------------------

### AssocBlendSurfaceActionBody.StartEdgeContinuity

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-ManagedRefGuide-Autodesk_AutoCAD_DatabaseServices_AssocBlendSurfaceActionBody_StartEdgeContinuity

Gets or sets the start edge continuity for the blend surface action body.

```APIDOC
## Property: StartEdgeContinuity

### Description
Gets or sets the start edge continuity value for the AssocBlendSurfaceActionBody. This property wraps the ObjectARX AcDbAssocBlendSurfaceActionBody::startEdgeContinuity() and AcDbAssocBlendSurfaceActionBody::setStartEdgeContinuity() methods.

### Signature
- **C#**: public short StartEdgeContinuity;
- **Visual Basic**: Public Property StartEdgeContinuity() As short

### Namespace
Autodesk.AutoCAD.DatabaseServices
```

--------------------------------

### Implement SetupForAudit in VB.NET

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-CE5219B4-CE8D-4318-B4FD-69FD9036B91C

This method initializes the plug-in context by caching the database to be checked and iterating through DWS files to cache standards information. Do not store references to the DWS database objects as they may become invalid.

```VB.NET
Public Sub SetupForAudit(ByVal pDb As AcadDatabase, _
                         ByVal szPathName As String, _
                         ByVal stdNameArray As Object, _
                         ByVal stdPathArray As Object, _
                         ByVal stdDbArray As Object) _
                               Implements IAcStPlugin2.SetupForAudit

    ' Used to define the context which the plug-in will operate.

    ' The drawing to be checked and the DWS files being used are passed
    ' to the plug-in at this point. Store the DWS standards definitions
    ' and the objects to be checked. The GetObjectFilter() method is used
    ' to specify the object type that the plug-in should check for errors.

    ' WARNING!: Do not save a reference to the database object,
    ' as it may not be valid going forward.

    If Not IsNothing(pDb) Then
        ' Store a reference to the DWG to be checked
        m_pCheckDatabase = pDb

        ' Verify the reference to the DWG is valid object
        If Not IsNothing(m_pCheckDatabase) Then
            ' << Change based on standards implementation >>
            For Each acObj As AcadObject In m_pCheckDatabase.Layers
                If acObj.ObjectName = "AcDbLayerTableRecord" Then
                    m_ContextList.Add(acObj.ObjectID, True)
                End If
            Next
        End If

        Dim iDWS As Integer

        ' Iterate each of the DWS files and cache the objects to use to fix errors
        For iDWS = 0 To UBound(stdDbArray)
            ' Get the DWS database
            m_pDWSDatabase = stdDbArray(iDWS)

            ' << Change based on standards implementation >>
            Dim pStdLayer As AcadLayer

            ' Iterate the layers in the database
            Dim i As Integer = 0
            For Each pStdLayer In m_pDWSDatabase.Layers
                Dim layerCache As New LayerCache()
                ' Cache the properties of the layers in the DWS database
                layerCache.Name = pStdLayer.Name
                layerCache.Color = pStdLayer.color
                layerCache.Lineweight = pStdLayer.Lineweight

                layerCache.StandardFileName = stdNameArray(iDWS)

                ' Create a fix object to be used later to correct a standards violation
                Dim pFix As New AcStFix()
                pFix.Description = "Layer fix"
                pFix.StandardFileName = layerCache.StandardFileName
                pFix.FixObjectName = pStdLayer.Name

                If pFix.PropertyCount = 0 Then
                    pFix.PropertyValuePut("Color", pStdLayer.color)
                    pFix.PropertyValuePut("Lineweight", pStdLayer.Lineweight)
                End If

                layerCache.StandardsFix = pFix
                ReDim Preserve m_LayerCacheArray(i)
                m_LayerCacheArray(i) = layerCache
                layerCache = Nothing
                pFix = Nothing
                i = i + 1
            Next

            m_pDWSDatabase = Nothing
        Next
    End If
End Sub
```

--------------------------------

### Example of pop-error-mode usage

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-60AFEFAD-1DF5-448F-A2E9-D7260DB279E4

Demonstrates how to use pop-error-mode within a custom error handler setup.

```AutoLISP
(defun my_err (err_msg)
    (if (/= err_msg "Function cancelled")
      (prompt (strcat "\nError: " err_msg))
    )
    (command "._undo" "_e")
    (command "._U")
    (setq *error* olderr)
  (princ)
)

(defun myUtil (key / )
    (setq olderr *error*
          *error* my_err)
    (*push-error-using-command*)         ; Indicate use of the command function instead of command-s
                                         ; in a custom error handler

    (command "._undo" "_group")          ; The following will not be executed in this sample, but is good 
                                         ; framework for setting up your own error handlers
  
    (/ 1 0)                              ; Call a function with incorrect values to trigger the custom error handler
                                         ; Remove when setting up your code
   
    ;; Perform your tasks here

    (command "._undo" "_e")
    (setq *error* olderr)                ; Restore old *error* handler
    (*pop-error-mode*)                   ; End the use of *push-error-using-command*
)
```

--------------------------------

### Create a 3D Cone Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-95CCDBE3-C787-4FF5-AE5F-A94B0F2DF505

Examples demonstrating how to create a 3D solid cone and adjust the viewport to view it.

```VBA
Sub Example_AddCone()
    ' This example creates a cone in model space.
   
    Dim coneObj As Acad3DSolid
    Dim radius As Double
    Dim center(0 To 2) As Double
    Dim height As Double
    
    ' Define the cone
    center(0) = 0#: center(1) = 0#: center(2) = 0#
    radius = 5#
    height = 20#
    
    ' Create the Cone (3DSolid) object in model space
    Set coneObj = ThisDrawing.ModelSpace.AddCone(center, radius, height)
    
    ' Change the viewing direction of the viewport to better see the cone
    Dim NewDirection(0 To 2) As Double
    NewDirection(0) = -1: NewDirection(1) = -1: NewDirection(2) = 1
    ThisDrawing.ActiveViewport.direction = NewDirection
    ThisDrawing.ActiveViewport = ThisDrawing.ActiveViewport
    ZoomAll
End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_AddCone()
    ;; This example creates a cone in model space.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the cone
    (setq center (vlax-3d-point 0 0 0)
          coneRadius 5
	         coneHeight 20)
    
    ;; Create the Cone (3DSolid) object in model space
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq coneObj (vla-AddCone modelSpace center coneRadius coneHeight))
  
    ;; Change the viewing direction of the viewport to better see the cone
    (setq NewDirection (vlax-3d-point -1 -1 1))
    (setq activeViewport (vla-get-ActiveViewport doc))
    (vla-put-Direction activeViewport NewDirection)
    (vla-put-ActiveViewport doc activeViewport)
    (vla-ZoomAll acadObj)
)
```

--------------------------------

### Property Promotion Examples

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-A65FBCCF-CC5D-47E8-9117-D577D9CB9D8A

Comparison of output format for StartPoint property based on the context parameter.

```AutoLISP
StartPoint (type: AcGePoint3d)  (LocalName: StartPoint) = 6.250000   8.750000  0.000000
```

```AutoLISP
StartPoint/X (type: double)  (LocalName: Start X) = 6.250000
StartPoint/Y (type: double)  (LocalName: Start Y) = 8.750000
StartPoint/Z (type: double)  (LocalName: Start Z) = 0.000000
```

--------------------------------

### Get RCS file path in C++

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-RefGuide-AcDbPointCloudDefEx__getRcsFilePath_AcString__const

Retrieves the file path for a given RCS GUID.

```cpp
const TCHAR* getRcsFilePath(
    const AcString& guid
) const;
```

--------------------------------

### GetUCSMatrix Example

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-85495614-C788-45C7-8E26-2BC8A2C3A490

Examples demonstrating how to create a UCS, retrieve its transformation matrix, and apply it to a circle object.

```VBA
Sub Example_GetUCSMatrix()
    ' This example creates a new UCS and finds the UCS matrix for it.
    ' It then creates a circle using WCS coordinates and
    ' transforms the circle for the UCS.
    
    ' Define a new UCS and turn on the UCS icon at the origin.
    Dim ucsObj As AcadUCS
    Dim origin(0 To 2) As Double
    Dim xAxisPoint(0 To 2) As Double
    Dim yAxisPoint(0 To 2) As Double
    
    origin(0) = 2: origin(1) = 2: origin(2) = 0
    xAxisPoint(0) = 3: xAxisPoint(1) = 2: xAxisPoint(2) = 0
    yAxisPoint(0) = 2: yAxisPoint(1) = 3: yAxisPoint(2) = 0
    
    Set ucsObj = ThisDrawing.UserCoordinateSystems.Add(origin, xAxisPoint, yAxisPoint, "UCS1")
    ThisDrawing.ActiveUCS = ucsObj
    ThisDrawing.ActiveViewport.UCSIconOn = True
    ThisDrawing.ActiveViewport.UCSIconAtOrigin = True
    ThisDrawing.ActiveViewport = ThisDrawing.ActiveViewport
    
    ' Create a circle using WCS coordinates
    Dim circleObj As AcadCircle
    Dim center(0 To 2) As Double
    Dim radius As Double
    center(0) = 1: center(1) = 1: center(2) = 0
    radius = 0.5
    Set circleObj = ThisDrawing.ModelSpace.AddCircle(center, radius)
    ZoomAll
    
    ' Get the UCS transformation matrix
    Dim TransMatrix As Variant
    TransMatrix = ucsObj.GetUCSMatrix()
    
    ' Transform the circle to the UCS coordinates
    MsgBox "Transform the circle.", , "GetUCSMatrix Example"
    circleObj.TransformBy (TransMatrix)
    circleObj.Update
    
    MsgBox "The circle is transformed.", , "GetUCSMatrix Example"
        
End Sub
```

```Visual LISP
(vl-load-com)
(defun c:Example_GetUCSMatrix()
    ;; This example creates a new UCS and finds the UCS matrix for it.
    ;; It then creates a circle using WCS coordinates and
    ;; transforms the circle for the UCS.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
  
    ;; Define a new UCS and turn on the UCS icon at the origin.
    (setq origin (vlax-3d-point 2 2 0)
          xAxisPoint (vlax-3d-point 3 2 0)
          yAxisPoint (vlax-3d-point 2 3 0))
    
    (setq ucsObj (vla-Add (vla-get-UserCoordinateSystems doc) origin xAxisPoint yAxisPoint "UCS1"))
    (vla-put-ActiveUCS doc ucsObj)
    (vla-put-UCSIconOn (vla-get-ActiveViewport doc) :vlax-true)
    (vla-put-UCSIconAtOrigin (vla-get-ActiveViewport doc) :vlax-true)
    (vla-put-ActiveViewport doc (vla-get-ActiveViewport doc))
    
    ;; Create a circle using WCS coordinates
    (setq center (vlax-3d-point 1 1 0)
          radius 0.5)
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq circleObj (vla-AddCircle modelSpace center radius))
    (vla-ZoomAll acadObj)
    
    ;; Get the UCS transformation matrix
    (setq TransMatrix (vla-GetUCSMatrix ucsObj))
    
    ;; Transform the circle to the UCS coordinates
    (alert "Transform the circle.")
    (vla-TransformBy circleObj TransMatrix)
    (vla-Update circleObj)
    
    (alert "The circle is transformed.")
)
```

--------------------------------

### Invoking Help Calls

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-RefGuide-acedHelp_ACHAR__ACHAR__int

Examples demonstrating how to trigger help for specific commands or custom help files.

```cpp
_/* Bring up Help for the TRIM command in AutoCAD
Help (by default acad.chm) */_
acedHelp(NULL, "trim", 0); 

_/* Bring up Help for the topic my_dialog in the file
myfile.chm. */_
acedHelp("myfile.chm", "my_dialog", 0);
```

--------------------------------

### AssocBlendSurfaceActionBody.StartEdgeBulge

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-ManagedRefGuide-Autodesk_AutoCAD_DatabaseServices_AssocBlendSurfaceActionBody_StartEdgeBulge

Gets or sets the start edge bulge value for the blend surface action body.

```APIDOC
## Property: StartEdgeBulge

### Description
Gets or sets the start edge bulge value for the AssocBlendSurfaceActionBody. This property wraps the ObjectARX AcDbAssocBlendSurfaceActionBody::startEdgeBulge() and AcDbAssocBlendSurfaceActionBody::setStartEdgeBulge() methods.

### Signature
- **C#**: public double StartEdgeBulge;
- **Visual Basic**: Public Property StartEdgeBulge() As double

### Namespace
Autodesk.AutoCAD.DatabaseServices
```

--------------------------------

### Startup Script with Template Syntax

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-5510017F-4656-478F-BD4C-AB6B1998BF55

Command line syntax for creating a new drawing from a template and executing a script file immediately after.

```text
_executable_path_ /t MyTemplate /b setup
```

```text
_executable_path_ -t MyTemplate -b setup
```

--------------------------------

### BeginShortcutMenuOSnap Event Implementation

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-A244B425-3107-4F3B-97C6-229FCA1286EA

An example of intercepting the shortcut menu start while in osnap mode using VBA.

```VBA
Private Sub AcadDocument_BeginShortcutMenuOSnap(ShortcutMenu As AutoCAD.IAcadPopupMenu)
    ' This example intercepts a shortcut menu start while you are in the osnap mode.
    '
    MsgBox "You have just initiated a shortcut menu in osnap mode!"
End Sub
```

--------------------------------

### Get Lower Boundary of Safearray Dimensions

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-8ABBA8A8-D421-48D2-BCBC-34DA1C728A78

Retrieves the starting index for the first and second dimensions of a safearray.

```AutoLISP
(vlax-safearray-get-l-bound tmatrix 1)
```

```AutoLISP
(vlax-safearray-get-l-bound tmatrix 2)
```

--------------------------------

### Handle BeginShortcutMenuGrip Event in VBA

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-6E178381-061D-48FB-95C9-3D077AB1A1EF

An example of intercepting the shortcut menu start while in grip mode using VBA.

```VBA
Private Sub AcadDocument_BeginShortcutMenuGrip(ShortcutMenu As AutoCAD.IAcadPopupMenu)
    ' This example intercepts a shortcut menu start while you are in the grip mode.
    '
    MsgBox "You have just initiated a shortcut menu in grip mode!"
End Sub
```

--------------------------------

### Using acdbGetPreviewBitmapFromDwg to Display a Preview

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-RefGuide-acdbGetPreviewBitmapFromDwg_ACHAR__HBITMAP__HPALETTE_

Example demonstrating how to call the function and render the resulting bitmap and palette to a device context.

```cpp
HBITMAP hBitmap;
HPALETTE hPal;
acdbGetPreviewBitmapFromDwg("foo.dwg", &hBitmap, &hPal);

_// Palette_
CPalette* oldPal = pDC->SelectPalette(CPalette::FromHandle(hPal),TRUE);
pDC->RealizePalette();

CBitmap bm;
bm.Attach(hBitmap);

CDC dcMem; 
dcMem.CreateCompatibleDC(pDC);

CBitmap *pOldBitmap = dcMem.SelectObject(&bm);
pDC->BitBlt(0, 0, 1000,1000, &dcMem, 0, 0, SRCCOPY);

dcMem.SelectObject(pOldBitmap);

pDC->SelectPalette(oldPal,TRUE );
pDC->RealizePalette();

bm.DeleteObject();
DeleteObject(hBitmap);
DeleteObject(hPal);
```

--------------------------------

### Start

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=OARX-ManagedRefGuide-__MEMBERTYPE_Methods_Autodesk_AutoCAD_Runtime_ProgressMeter

Initializes the progress meter.

```APIDOC
## Start

### Description
Initializes and starts the progress meter display.
```

--------------------------------

### Example Command Script File

Source: https://help.autodesk.com/view/OARX/2026/ENU?guid=GUID-9F648910-2D8C-4AED-B796-FD977D52872E

A sample script file demonstrating command execution and the use of comments to document script actions.

```text
; Turn grid on
grid on
; Set scale for linetypes
ltscale 3.0
; Set current layer and its color
layer set 0 color red 0

; Blank line above to end the LAYER command
```