flexiWAN

https://docs.flexiwan.com/
Admin
flexiWAN is an open-source SD-WAN and SASE platform that brings modularity and flexibility to...
Tokens:146,785
Snippets:1,112
Trust Score:9.1
Update:1 week ago
Show doc for...
Tokens:
Raw
### Boot Ubuntu installer in serial console mode

Source: https://docs.flexiwan.com/6.5.1/guides/ubuntu.html

Enter this command at the boot prompt to start the Ubuntu installer with serial console output. Use this if the device has a serial console and shows 'graphics initialization failed' or 'Error setting up gfxboot'. Adjust the baud rate (115200) if needed.

```bash
install console=ttyS0,115200n8 vga=none
```

--------------------------------

### Start flexiwan-router service

Source: https://docs.flexiwan.com/6.5.1/troubleshoot/overview.html

Run 'systemctl start flexiwan-router' to start the flexiWAN router service and confirm the device connects back to flexiManage after a fwkill command.

```bash
systemctl start flexiwan-router
```

--------------------------------

### Start minicom with serial setup

Source: https://docs.flexiwan.com/6.5.1/troubleshoot/advanced.html

Starts minicom to configure the serial port. After running, select 'Serial port setup' and change the Serial Device to /dev/ttyUSB2.

```bash
minicom -s
```

--------------------------------

### Start flexiEdge agent

Source: https://docs.flexiwan.com/6.5.1/troubleshoot/overview.html

Run 'fwagent start' to start the flexiEdge agent. This is used when troubleshooting device registration failure.

```bash
fwagent start
```

--------------------------------

### Install flexiWAN router

Source: https://docs.flexiwan.com/6.5.1/guides/hetzner.html

Run after adding the repository to install the flexiWAN router package.

```bash
apt-get install -y flexiwan-router
```

--------------------------------

### Add flexiWAN repository and install flexiwan-router

Source: https://docs.flexiwan.com/6.5.1/guides/manual.html

Run these commands as root on Ubuntu 20.04 LTS. The first command adds the flexiWAN key to the apt-key local database and the repository to apt-get. The second installs the flexiWAN software, turning the device into a flexiEdge device.

```bash
sudo curl -sL https://deb.flexiwan.com/setup | sudo bash -
sudo apt-get install -y flexiwan-router
```

--------------------------------

### Install flexiWAN and run System Checker

Source: https://docs.flexiwan.com/6.5.1/guides/digitalocean.html

Run this one-line command after SSHing into the Droplet to add the flexiWAN repository, install the flexiwan-router package, and run the System Checker.

```bash
sudo curl -sL https://deb.flexiwan.com/setup | sudo bash - && sudo apt-get install -y flexiwan-router && sudo fwsystem_checker
```

--------------------------------

### Start vRouter with Apply API

Source: https://docs.flexiwan.com/6.5.1/api/nbapi.html

Applies to a specific device to start the vRouter. The request body contains only the method 'start'.

```json
{"method":"start"}
```

--------------------------------

### Elevate privileges and add flexiWAN repository

Source: https://docs.flexiwan.com/6.5.1/guides/gcp.html

Run these commands in the SSH session to elevate privileges and add the flexiWAN repository. The first command switches to root, the second downloads and runs the setup script.

```bash
sudo su
```

```bash
sudo curl -sL https://deb.flexiwan.com/setup | sudo bash -
```

--------------------------------

### Install Ansible on Ubuntu 18.04

Source: https://docs.flexiwan.com/6.5.1/guides/aws-installation.html

Install Ansible and required Python Boto libraries on Ubuntu 18.04. Run these commands before using the AWS installation script.

```bash
sudo apt update
sudo apt install software-properties-common
sudo apt-add-repository ppa:ansible/ansible
sudo apt update
sudo apt install ansible python-boto3 python3-boto3 python-boto python3-boto

```

--------------------------------

### Install flexiWAN router on GCP VM

Source: https://docs.flexiwan.com/6.5.1/guides/gcp.html

Install the flexiWAN router package on the GCP VM using apt. After installation, run fwsystem_checker to prepare the VM.

```bash
apt install flexiwan-router
```

--------------------------------

### Start vRouter

Source: https://docs.flexiwan.com/api/nbapi.html

Applies to a specific device to start the vRouter.

```json
{"method":"start"}

```

--------------------------------

### Start flexiAgent

Source: https://docs.flexiwan.com/6.5.1/troubleshoot/agent-service.html

Starts flexiAgent after a stop or if it stopped trying to register or connect.

```bash
sudo fwagent start

```
Tokens:
Raw