### Install and run the EyeTrackVR Docs site

Source: https://docs.eyetrackvr.dev/development/docs/dev_docs

Steps to set up the EyeTrackVR Docs site locally: clone the repository, navigate to the vitepress folder, install Yarn packages, and start the development server.

```sh
git clone https://github.com/EyeTrackVR/EyeTrackVR-Docs.git
```

```sh
cd vitepress
```

```sh
 yarn
```

```sh
yarn dev
```

--------------------------------

### GET /restartDevice

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Restarts the ESP itself.

```APIDOC
## [GET] /restartDevice

### Description
Restarts the ESP itself.

### Method
GET

### Endpoint
http://{device_name}.local:81/control/builtin/command/restartDevice

### Parameters
None

### Response
#### Success Response (200)
- **status** (string) - Confirmation that the device is restarting.

#### Response Example
{
  "status": "restarting"
}
```

--------------------------------

### GET /getStoredConfig

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Returns a JSON object of the device's current config.

```APIDOC
## [GET] /getStoredConfig

### Description
Returns a JSON object of the device's current config.

### Method
GET

### Endpoint
http://{device_name}.local:81/control/builtin/command/getStoredConfig

### Parameters
None

### Response
#### Success Response (200)
- **config** (object) - The current configuration.

#### Response Example
{
  "config": {}
}
```

--------------------------------

### GET /resetConfig

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Clears the current config in memory and RAM.

```APIDOC
## [GET] /resetConfig

### Description
Clears the current config in memory and RAM.

### Method
GET

### Endpoint
http://{device_name}.local:81/control/builtin/command/resetConfig

### Parameters
None

### Response
#### Success Response (200)
- **status** (string) - Confirmation that the config was reset.

#### Response Example
{
  "status": "reset"
}
```

--------------------------------

### Example git commit message

Source: https://docs.eyetrackvr.dev/development/docs/standards

Example of a git commit message following the project's style. The commit title uses the 'feat' type, the body lists details, and the footer includes a 'BREAKING CHANGE' note. The comment after the footer is optional and only used if needed.

```bash
feat: add a new feature # this is the commit title

- added new thing # some detail about the new thing

BREAKING CHANGE: this is a breaking change #this line is optionaland only used if needed
```

--------------------------------

### GET /ping

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Returns the status of the device.

```APIDOC
## [GET] /ping

### Description
Returns the status of the device.

### Method
GET

### Endpoint
http://{device_name}.local:81/control/builtin/command/ping

### Parameters
None

### Response
#### Success Response (200)
- **status** (string) - The status of the device.

#### Response Example
{
  "status": "ok"
}
```

--------------------------------

### GET /save

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Writes any changes to the flash. This is required for any endpoint that modifies the config.

```APIDOC
## [GET] /save

### Description
Writes any changes to the flash. This is required for any endpoint that modifies the config.

### Method
GET

### Endpoint
http://{device_name}.local:81/control/builtin/command/save

### Parameters
None

### Response
#### Success Response (200)
- **status** (string) - Confirmation that changes were saved.

#### Response Example
{
  "status": "saved"
}
```

--------------------------------

### POST /setDevice

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Sets the OTA and mDNS settings.

```APIDOC
## [POST] /setDevice

### Description
Sets the OTA and mDNS settings.

### Method
POST

### Endpoint
http://{device_name}.local:81/control/builtin/command/setDevice

### Parameters
#### Query Parameters
- **hostname** (string) - Required - The hostname for the ESP, used by OTA and mDNS.
- **service** (string) - Required - The service to look for when scanning mDNS devices. Should be set to `openiristracker`.
- **ota_password** (string) - Required - The password for the OTA service.
- **ota_port** (integer) - Required - The port for the OTA service.
- **firmware_name** (string) - Optional - The name of the binary file for OTA. Deprecated and will be removed.

### Request Example
{
  "hostname": "esp32",
  "service": "openiristracker",
  "ota_password": "password",
  "ota_port": 3232,
  "firmware_name": "firmware.bin"
}

### Response
#### Success Response (200)
- **status** (string) - Confirmation that the device settings were updated.

#### Response Example
{
  "status": "ok"
}
```

--------------------------------

### Required Parts List

Source: https://docs.eyetrackvr.dev/how_to_build/v4_full_build

Lists the components needed for the V4 build, as displayed in the source.

```text
2 × Supported ESP32 Camera Boards
2 × Cameras Without IR Filters
1 × V4 IR Emitter Kit
3 × USB-C cables
1 × USB hub
1 × Set of 3D printed mounts
```

--------------------------------

### GET /restartCamera

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Restarts the camera.

```APIDOC
## [GET] /restartCamera

### Description
Restarts the camera.

### Method
GET

### Endpoint
http://{device_name}.local:81/control/builtin/command/restartCamera

### Parameters
None

### Response
#### Success Response (200)
- **status** (string) - Confirmation that the camera is restarting.

#### Response Example
{
  "status": "restarting"
}
```

--------------------------------

### OTA configuration for firmware versions 1.0.0 and under (ini/user_config.ini)

Source: https://docs.eyetrackvr.dev/firmware_guide/upload_and_update_firmware.html

Configuration block for enabling OTA in the ini/user_config.ini file. Set enableota to 1, provide the device's IP or mDNS name, set a password, and specify the OTA server port. This is required before changing to an OTA environment.

```ini
[ota]
enableota = 1
otaserverip = "openiristrackerL.local" # here we use a custom mDNS name
otapassword = "12345678"
otaserverport = 3232

```

--------------------------------

### V3 Max Bin Exposure Calculation (2 LEDs @ 3.2 mA)

Source: https://docs.eyetrackvr.dev/getting_started/led_safety

Worst-case calculation for V3 module using high-bin LEDs (8 mW/sr @ 20 mA), resulting in ~11.4% of the ICNIRP corneal limit.

```text
Ie_single  = 8 × (3.2 / 20) = 1.28 mW/sr
E_single   = 1.28 / (1.5)² = 0.57 mW/cm²
E_total    = 0.57 × 2 = 1.14 mW/cm²
→ ~11.4% of ICNIRP corneal limit
```

--------------------------------

### POST /setCamera

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Sets all of the camera settings.

```APIDOC
## [POST] /setCamera

### Description
Sets all of the camera settings.

### Method
POST

### Endpoint
http://{device_name}.local:81/control/builtin/command/setCamera

### Parameters
#### Query Parameters
- **camera_setting** (string) - Required - The camera setting to change.
- **value** (string) - Required - The value to set.

### Request Example
{
  "camera_setting": "brightness",
  "value": "50"
}

### Response
#### Success Response (200)
- **status** (string) - Confirmation that the camera settings were updated.

#### Response Example
{
  "status": "ok"
}
```

--------------------------------

### Camera Parameters

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Configuration parameters for the camera, including flipping, resolution, quality, and brightness.

```APIDOC
## Camera Parameters

### Description
These parameters control camera behavior: vertical/horizontal flipping, frame resolution, JPEG quality, and brightness.

### Parameters
- **vflip** (integer) - Optional - Whether to flip the frames vertically. Value: 0 or 1.
- **framesize** (integer) - Optional - A value between 0-7 indicating the frame resolution. Larger number - higher resolution.
- **hflip** (integer) - Optional - Whether to flip the frames horizontally. Value: 0 or 1.
- **quality** (integer) - Optional - The JPEG quality level: 1-63? Smaller number = higher quality, more latency and less fps.
- **brightness** (integer) - Optional - The `agc_gain` of the camera. Larger number = more bright.
```

--------------------------------

### POST /wifi

Source: https://docs.eyetrackvr.dev/firmware_guide/rest_api.html

Adds a new wifi network, or writes over an existing one.

```APIDOC
## [POST] /wifi

### Description
Adds a new wifi network, or writes over an existing one.

### Method
POST

### Endpoint
http://{device_name}.local:81/control/builtin/command/wifi

### Parameters
#### Query Parameters
- **ssid** (string) - Required - The SSID of the network.
- **password** (string) - Required - The password of the network.
- **networkName** (string) - Required - The unique name (given by you) to refer to that network in memory.
- **channel** (integer) - Required - The channel for the wifi network to broadcast on. Only 1-14 are allowed.
- **power** (integer) - Required - The transmission power of the ESP for that network config. Use the wifi_power_t enum values.
- **adhoc** (boolean) - Required - Whether to enable AP mode or not.

### Request Example
{
  "ssid": "MyNetwork",
  "password": "password",
  "networkName": "home",
  "channel": 6,
  "power": 78,
  "adhoc": false
}

### Response
#### Success Response (200)
- **status** (string) - Confirmation that the wifi network was added.

#### Response Example
{
  "status": "ok"
}
```

--------------------------------

### Git commands to update firmware to newest version

Source: https://docs.eyetrackvr.dev/firmware_guide/upload_and_update_firmware.html

Commands to update the OpenIris firmware repository: enter the cloned directory, stash local config changes, pull the latest changes, and apply the stashed changes. Use git reset --hard if something goes wrong.

```bash
cd C:/OpenIris/
git stash
git pull
git stash apply

```