### Enable adb access on Wingtech

Source: https://efforg.github.io/rayhunter/wingtech-ct2mhs01.html

Use the installer utility to start adb, then open an adb shell.

```bash
./installer util wingtech-start-adb --admin-password 12345678
adb shell
```

--------------------------------

### Run the Rayhunter installer

Source: https://efforg.github.io/rayhunter/print.html

Commands to initiate the installer for Orbic or Kajeet/Smartspot devices, including optional arguments for custom credentials and the USB-based installation method.

```bash
# For Orbic:
./installer orbic --admin-password 'mypassword'

# For Kajeet/Smartspot:
./installer orbic --admin-password '$m@rt$p0tc0nf!g'

# Note: the arguments --admin-username 'myusername' and --admin-ip 'mydeviceip'
#       may be required if different from the default.

# Or install over USB if you want ADB and a root shell (not recommended for most users)
./installer orbic-usb
```

--------------------------------

### Check Rayhunter installer help

Source: https://efforg.github.io/rayhunter/installing-from-release.html

Use these commands to view help for the installer and its utility subcommand. Useful for finding installation commands for other supported devices.

```bash
./installer --help
./installer util --help
```

--------------------------------

### Enable telnet access on Wingtech

Source: https://efforg.github.io/rayhunter/wingtech-ct2mhs01.html

Use the installer utility to start telnet, then connect via telnet to 192.168.1.1.

```bash
./installer util wingtech-start-telnet --admin-password 12345678
telnet 192.168.1.1
```

--------------------------------

### Build and install Rayhunter

Source: https://efforg.github.io/rayhunter/installing-from-source.html

Builds everything and installs to a device. Replace 'orbic' with your device type.

```bash
./scripts/build-dev.sh
./scripts/install-dev.sh orbic  # replace 'orbic' with your device type
```

--------------------------------

### Run Moxee installer

Source: https://efforg.github.io/rayhunter/print.html

Executes the installer for the Moxee device. Provide custom admin credentials or IP address if they differ from the defaults.

```bash
__
./installer moxee --admin-password 'mypassword'

# Note: the arguments --admin-username 'myusername' and --admin-ip 'mydeviceip'
#       may be required if different from the default.
```

--------------------------------

### Rayhunter installer progress messages

Source: https://efforg.github.io/rayhunter/wingtech-ct2mhs01.html

Expected output during installation, showing the installer stuck at 'Testing rayhunter ...'.

```text
Starting telnet ... ok
Connecting via telnet to 192.168.1.1 ... ok
Sending file /data/rayhunter/config.toml ... ok
Sending file /data/rayhunter/rayhunter-daemon ... ok
Sending file /etc/init.d/rayhunter_daemon ... ok
Rebooting device and waiting 30 seconds for it to start up.
Testing rayhunter ...
```

--------------------------------

### Run UZ801 Installer

Source: https://efforg.github.io/rayhunter/uz801.html

Execute the installer script while the device is fully booted and connected to the computer. Use the --admin-ip argument if the device IP is not the default 192.168.100.1.

```bash
./installer uz801
```

--------------------------------

### Resource busy error output

Source: https://efforg.github.io/rayhunter/print.html

Example error message when ModemManager prevents the installer from claiming the AT interface.

```text
Failed to start adb on the PinePhone's modem

Caused by:
    0: detach_and_claim_interface({USB_INTERFACE_NUMBER}) failed
    1: Resource busy (os error 16)
```

--------------------------------

### Run Rayhunter installer for Moxee

Source: https://efforg.github.io/rayhunter/moxee.html

Installs Rayhunter on the Moxee Hotspot. The password is the device admin password; if the username, password, or IP address differ from defaults, provide them via --admin-username and --admin-ip. The installer is similar to the Orbic installer but with better defaults for more recording space.

```bash
./installer moxee --admin-password 'mypassword'

# Note: the arguments --admin-username 'myusername' and --admin-ip 'mydeviceip'
#       may be required if different from the default.
```

--------------------------------

### Install Rayhunter on Wingtech

Source: https://efforg.github.io/rayhunter/wingtech-ct2mhs01.html

Run the installer with the admin password. Replace '12345678' with your own password.

```bash
./installer wingtech --admin-password 12345678  # replace with your own password
```

--------------------------------

### Run Rayhunter installer for TP-Link

Source: https://efforg.github.io/rayhunter/tplink-m7350.html

Execute the installer script specifically for the TP-Link M7350 device.

```bash
./installer tplink
```

--------------------------------

### Rayhunter install commands for Orbic and Kajeet

Source: https://efforg.github.io/rayhunter/orbic.html

Run the installer with the appropriate admin password. The password is the one used for the device admin menu; on Verizon Orbic it is the WiFi password, and on Kajeet/Smartspot it is '$m@rt$p0tc0nf!g'. Provide custom admin username or IP if changed from defaults. USB installation is for advanced users who want ADB and a root shell.

```bash
#!/bin/bash
# For Orbic:
./installer orbic --admin-password 'mypassword'

# For Kajeet/Smartspot:
./installer orbic --admin-password '$m@rt$p0tc0nf!g'

# Note: the arguments --admin-username 'myusername' and --admin-ip 'mydeviceip'
#       may be required if different from the default.

# Or install over USB if you want ADB and a root shell (not recommended for most users)
./installer orbic-usb

```

--------------------------------

### Install Rayhunter on PinePhone

Source: https://efforg.github.io/rayhunter/pinephone.html

Run the installer on the PinePhone itself. This must be executed on the device, not remotely.

```bash
./installer pinephone
```

--------------------------------

### Open shell on Moxee after installation

Source: https://efforg.github.io/rayhunter/moxee.html

After running the installer, there is no root shell and ADB is not enabled. Use this command to access a shell on the device.

```bash
./installer util orbic-shell
```

--------------------------------

### Run Rayhunter installer for Orbic and TP-Link devices

Source: https://efforg.github.io/rayhunter/installing-from-release.html

Run the installer with the appropriate device argument. For Orbic, provide the admin password (and optionally username/IP if changed). For TP-Link, no password is needed. On Windows, run in PowerShell, not CMD.

```bash
# For Orbic:
./installer orbic --admin-password 'mypassword'

# Important notes:
# - the arguments --admin-username 'myusername' and --admin-ip 'mydeviceip'
#   may be required if different from the default.
# - on Windows this command should be run in PowerShell and not the Command
#   Prompt (CMD) where characters like quotes are treated differently.

# For TP-Link:
./installer tplink
```

--------------------------------

### WebDAV configuration in config.toml

Source: https://efforg.github.io/rayhunter/configuration.html

Example configuration block for enabling WebDAV uploads in the Rayhunter config.toml file.

```toml
[webdav]
url = "https://dav.example.com/rayhunter/"
username = "user"
password = "pass"
upload_timeout_secs = 300
poll_interval_secs = 3600
min_age_secs = 86400
delete_on_upload = false
```

--------------------------------

### rayhunter-check usage examples

Source: https://efforg.github.io/rayhunter/reanalyzing.html

Examples of using rayhunter-check to analyze QMDL and PCAP files, check all files in a directory, and run in debug mode. The --path option is required and can point to a file or directory.

```bash
rayhunter-check -p ~/Downloads/myfile.qmdl
```

```bash
rayhunter-check -p ~/Downloads/myfile.pcap
```

```bash
rayhunter-check -p ~/Downloads #Check all files in downloads
```

```bash
rayhunter-check -d -p ~/Downloads/myfile.qmdl #run in debug mode
```

--------------------------------

### Obtain root shell on TP-Link

Source: https://efforg.github.io/rayhunter/tplink-m7350.html

Use the installer utility to gain root shell access to the device.

```bash
./installer util tplink-shell
```

--------------------------------

### Enable adb on PinePhone modem

Source: https://efforg.github.io/rayhunter/pinephone.html

Enable adb access to the modem. This command starts adb and then opens a shell.

```bash
./installer util pinephone-start-adb
adb shell
```

--------------------------------

### Run orbic-shell utility after install

Source: https://efforg.github.io/rayhunter/orbic.html

Use this command after the installer to access a shell without enabling ADB or root. This is the recommended way to get a shell on the device.

```bash
./installer util orbic-shell

```

--------------------------------

### Run rayhunter-daemon in debug mode on PC

Source: https://efforg.github.io/rayhunter/installing-from-source.html

Sets up a local qmdl store and config.toml with debug_mode=true, then runs the daemon. Skips DIAG, display, key input, battery worker, and WiFi client; recording endpoints won't work, but frontend and read-only APIs do.

```bash
mkdir -p ./qmdl && printf 'entries = []\n' > ./qmdl/manifest.toml
cat > config.toml <<'EOF'
qmdl_store_path = "./qmdl"
port = 8080
debug_mode = true
EOF
cargo run -p rayhunter-daemon --bin rayhunter-daemon -- ./config.toml
```

--------------------------------

### Typical Rayhunter filesystem layout

Source: https://efforg.github.io/rayhunter/porting.html

Shows the conventional directory structure for Rayhunter installation. The daemon binary, config file, and qmdl directory are placed under /data/rayhunter/. If a different path is used, update the qmdl_store_path setting in config.toml.

```text
_
/data/rayhunter/rayhunter-daemon
/data/rayhunter/config.toml
/data/rayhunter/qmdl/
```

--------------------------------

### Rayhunter installation failure error

Source: https://efforg.github.io/rayhunter/wingtech-ct2mhs01.html

Error message shown when the installer fails to connect to the device. Ensure your computer is connected to the hotspot's WiFi network.

```text
Testing rayhunter ...
Failed to install rayhunter on the Wingtech CT2MHS01

Caused by:
    0: error sending request for url (http://192.168.1.1:8080/index.html)
    1: client error (Connect)
    2: tcp connect error: Network is unreachable (os error 101)
    3: Network is unreachable (os error 101)
```

--------------------------------

### Run frontend dev server

Source: https://efforg.github.io/rayhunter/installing-from-source.html

Runs the SvelteKit frontend separately on your PC while the Rust parts run on the target device. Assumes rayhunter-daemon is listening on localhost:8080. Use API_TARGET to specify a custom backend IP:port.

```bash
cd daemon/web

# Assumes rayhunter-daemon is listening on localhost:8080
npm run dev

# Use a custom target IP:port where the backend runs
API_TARGET=http://192.168.1.1:8080 npm run dev
```