Doosan Robotics API

https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/
Admin
Doosan Robotics API is a C/C++ library that allows user applications to directly communicate with...
Tokens:780,134
Snippets:6,751
Trust Score:9.7
Update:1 month ago
Show doc for...
Tokens:
Raw
### start_rt_control usage example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/rt/session_lifecycle/start_rt_control.rst.txt

A complete example demonstrating how to connect to the controller, configure RT output, and start the real-time data stream.

```cpp
#include "DRFLEx.h"
#include <iostream>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;
    drfl.connect_rt_control("192.168.137.100", 12347);

    std::string version = "v1.0";
    float period = 0.001f;   // 1 msec = 1 kHz
    int lossCount = 4;

    // Configure RT output and start streaming
    drfl.set_rt_control_output(version, period, lossCount);

    if (drfl.start_rt_control())
        std::cout << "RT streaming started." << std::endl;
    else
        std::cout << "Failed to start RT streaming." << std::endl;

    return 0;
}
```

--------------------------------

### connect_rt_control usage example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/rt/session_lifecycle/connect_rt_control.rst.txt

A complete example demonstrating how to instantiate the CDRFLEx class and establish a UDP connection for RT control before starting the streaming process.

```cpp
#include "DRFLEx.h"
#include <iostream>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    // Connect to the robot controller via UDP for RT control
    if (drfl.connect_rt_control("192.168.137.100", 12347)) {
        std::cout << "RT connection established successfully." << std::endl;

        // Ready to configure input/output schema and start RT streaming
        drfl.start_rt_control();
    } 
    else {
        std::cout << "RT connection failed." << std::endl;
    }

    return 0;
}
```

--------------------------------

### Example Configuration for EtherNet/IP Welding Signals

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/applications/welding/digital_eip_interface/app_weld_set_interface_eip_r2m_process.html

This example demonstrates mapping the welding start, robot ready, and error reset signals to specific byte and bit positions in the EtherNet/IP communication frame.

```cpp
CONFIG_DIGITAL_WELDING_INTERFACE_PROCESS processSetting;

// Welding Start Signal Mapping
processSetting._WeldingStart._bEnable      = 1;
processSetting._WeldingStart._bByteOffset  = 5;
processSetting._WeldingStart._bBitOffset   = 3;
processSetting._WeldingStart._bCommDataType = 4;  // 8-bit data

// Robot Ready Signal Mapping
processSetting._RobotReady._bEnable      = 1;
processSetting._RobotReady._bByteOffset  = 8;
processSetting._RobotReady._bBitOffset   = 0;
processSetting._RobotReady._bCommDataType = 4;

// Error Reset Signal Mapping
processSetting._ErrorReset._bEnable      = 1;
processSetting._ErrorReset._bByteOffset  = 10;
processSetting._ErrorReset._bBitOffset   = 2;
processSetting._ErrorReset._bCommDataType = 4;

// Apply configuration
bool result = Drfl.app_weld_set_interface_eip_r2m_process(processSetting);
```

--------------------------------

### Configuring welding interface signals

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/applications/welding/digital_eip_interface/app_weld_set_interface_eip_r2m_process.rst.txt

Example showing how to map welding start and robot ready signals by configuring the CONFIG_DIGITAL_WELDING_INTERFACE_PROCESS structure.

```cpp
CONFIG_DIGITAL_WELDING_INTERFACE_PROCESS processSetting;

// Welding Start Signal Mapping
processSetting._WeldingStart._bEnable      = 1;
processSetting._WeldingStart._bByteOffset  = 5;
processSetting._WeldingStart._bBitOffset   = 3;
processSetting._WeldingStart._bCommDataType = 4;  // 8-bit data

// Robot Ready Signal Mapping
processSetting._RobotReady._bEnable      = 1;
processSetting._RobotReady._bByteOffset  = 8;
processSetting._RobotReady._bBitOffset   = 0;
processSetting._RobotReady._bCommDataType = 4;
```

--------------------------------

### servoj usage example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/velocity_servo/servoj.rst.txt

Example demonstrating how to initialize the CDRFLEx class and execute a servoj command in Override mode, with a commented-out example for Queue mode.

```cpp
#include "DRFLEx.h"
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;
    // Preconditions: Connected, servo ON, **Auto mode** active

    // Target joint pose and limits
    float q[6]    = { 0.f, 0.f, 90.f, 0.f, 0.f, 0.f };
    float jvel[6] = { 10.f, 10.f, 10.f, 10.f, 10.f, 10.f };
    float jacc[6] = { 10.f, 10.f, 10.f, 10.f, 10.f, 10.f };

    // Override: keep following the most recent target
    drfl.servoj(q, jvel, jacc, 0.02f, DR_SERVO_OVERRIDE);

    // Queue example (buffer waypoints)
    // drfl.servoj(q, jvel, jacc, 0.02f, DR_SERVO_QUEUE);

    return 0;
}
```

--------------------------------

### Verify system type before starting manual teaching

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/manual/safety_servo_operations/get_robot_system.rst.txt

This C++ example demonstrates how to retrieve the robot system type using get_robot_system and use a switch statement to handle different system environments (real, virtual, or emulator) before proceeding with operations.

```cpp
#include "DRFLEx.h"
#include <iostream>
using namespace DRAFramework;
using namespace std;

int main() {
    CDRFLEx drfl;

    // Preconditions:
    // - Connection established (open_connection)

    ROBOT_SYSTEM sysType = drfl.get_robot_system();

    switch (sysType) {
        case ROBOT_SYSTEM_REAL:
            cout << "[System] Connected to a REAL robot.\n";
            cout << "Proceeding with manual teaching operations.\n";
            break;

        case ROBOT_SYSTEM_VIRTUAL:
            cout << "[System] Running on VIRTUAL controller.\n";
            cout << "Motion commands will be simulated.\n";
            break;

        case ROBOT_SYSTEM_EMULATOR:
            cout << "[System] Connected to EMULATOR environment.\n";
            cout << "Force/IO feedback may be limited.\n";
            break;

        default:
            cout << "[System] Unknown system type detected.\n";
            break;
    }

    return 0;
}
```

--------------------------------

### movejx Usage Examples

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/motion_primitives_advanced/movejx.rst.txt

Examples demonstrating velocity/acceleration-based movement, time-based movement, and setup for motion blending.

```cpp
// CASE 1 — Velocity/acceleration-based joint-space move
float x1[6] = {559, 34.5, 651.5, 0, 180, 0};
unsigned char sol = 2;
float jvel = 10;
float jacc = 20;

drfl.movejx(x1, sol, jvel, jacc);
// Moves to the target pose corresponding to x1
// using velocity 10 deg/s and acceleration 20 deg/s².

// CASE 2 — Time-based motion
float x2[6] = {559, 34.5, 651.5, 0, 180, 0};
drfl.movejx(x2, sol, 0, 0, 5);
// Moves to the target joint configuration in 5 seconds.

// CASE 3 — Motion blending with previous move
float x3[6] = {559, 34.5, 651.5, 0, 180, 0};
float x4[6] = {559, 434.5, 651.5, 0, 180, 0};
float blend_radius = 50;
```

--------------------------------

### disconnect_rt_control usage example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/rt/session_lifecycle/disconnect_rt_control.rst.txt

An example demonstrating the sequence of connecting, starting, stopping, and finally disconnecting an RT control session.

```cpp
#include "DRFLEx.h"
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    drfl.connect_rt_control("192.168.137.100", 12347);
    drfl.start_rt_control();

    // Stop streaming and close the UDP channel
    drfl.stop_rt_control();
    drfl.disconnect_rt_control();
    return 0;
}
```

--------------------------------

### Example usage of setup_monitoring_version

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/common/monitoring_callbacks/setup_monitoring_version.rst.txt

Example showing how to set the monitoring data version to 1 to enable extended monitoring features.

```cpp
drfl.setup_monitoring_version(1);   // Set monitoring data version information to 1
```

--------------------------------

### Controller Connection Setup

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/tutorials/scenarios/4_minimal_welding_sample.rst.txt

Opens the TCP/IP connection and initializes monitoring version and system version.

```cpp
assert(Drfl.open_connection(IP_ADDR));

Drfl.setup_monitoring_version(1); // (0 -> older version, 1 -> latest)

SYSTEM_VERSION tSysVerion = {'\0',};
Drfl.get_system_version(&tSysVerion);
```

--------------------------------

### stop_rt_control Usage Example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/rt/session_lifecycle/stop_rt_control.rst.txt

A complete example demonstrating the lifecycle of real-time control, including connection, configuration, starting, stopping, and disconnecting.

```cpp
#include "DRFLEx.h"
#include <iostream>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    // Connect and configure
    drfl.connect_rt_control("192.168.137.100", 12347);
    std::string version = "v1.0";
    float period = 0.001f;  // 1 msec = 1 kHz
    int lossCount = 4;

    drfl.set_rt_control_output(version, period, lossCount);
    drfl.start_rt_control();

    // Perform RT operations
    // ...

    // Stop real-time communication
    drfl.stop_rt_control();

    // Finally disconnect
    drfl.disconnect_rt_control();
    return 0;
}
```

--------------------------------

### Switch to real robot system in C++

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/manual/safety_servo_operations/set_robot_system.rst.txt

This example demonstrates how to configure the controller to real hardware mode using set_robot_system and verify the change with get_robot_system before initiating a move command.

```cpp
#include "DRFLEx.h"
#include <iostream>
#include <thread>
using namespace std;
using namespace DRAFramework;

int main()
{
    CDRFLEx drfl;

    // Preconditions:
    // - Connection established (open_connection)
    // - No motion currently in progress

    cout << "[System] Setting robot system to REAL hardware...\n";
    if (drfl.set_robot_system(ROBOT_SYSTEM_REAL))
        cout << "[System] Robot system set to REAL.\n";
    else
        cout << "[System] Failed to change robot system.\n";

    // Verify configuration
    ROBOT_SYSTEM sysType = drfl.get_robot_system();
    cout << "[System] Current system type: " << sysType << endl;

    // Continue with manual teaching sequence
    float qTarget[6] = {0, -30, 90, 0, 90, 0};
    drfl.movej(qTarget, 30, 30);

    return 0;
}
```

--------------------------------

### Connect to controller and retrieve system version

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/common/connection/openconnection.rst.txt

This example demonstrates connecting to the robot controller using an IP address and subsequently retrieving and printing the controller's system version upon a successful connection.

```cpp
CDRFLEx drfl;

bool bConnected = drfl.open_connection("192.168.137.100");
if (bConnected) {
    SYSTEM_VERSION tSysVerion = { '\0', };
    DrFl.get_system_version(&tSysVerion);
    cout << "System version: " << tSysVerion._szController << endl;
}
```

--------------------------------

### speedl usage example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/velocity_servo/speedl.rst.txt

A complete example demonstrating the initialization of velocity and acceleration parameters and the execution of the speedl command.

```cpp
#include "DRFLEx.h"
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;
    // Preconditions: Connected, servo ON, Auto mode active

    // Define linear velocity and acceleration in Cartesian space
    float jvel[6] = {10.f, 10.f, 10.f, 10.f, 10.f, 10.f};
    float jacc[2] = {20.f, 20.f};

    // Execute TCP velocity control
    drfl.speedl(jvel, jacc, -10000.f);

    return 0;
}
```

--------------------------------

### Writing to a Modbus Register to Start a Conveyor

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/gpio_modbus_flange/set_modbus_output.rst.txt

This example demonstrates sending a start signal to a conveyor motor via Modbus before executing a joint motion in Auto Mode.

```cpp
#include "DRFLEx.h"
#include <cstdio>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    // Write value '1' to start a conveyor motor via Modbus
    if (!drfl.set_modbus_output("CONVEYOR_START", 1)) {
        printf("Failed to write Modbus output.\n");
        return -1;
    }

    // Perform Auto Mode motion after triggering the conveyor
    float pos[6] = {400.f, 150.f, 300.f, 180.f, 0.f, 0.f};
    drfl.movej(pos, 60.f, 30.f);

    return 0;
}
```

--------------------------------

### get_robot_mode Usage Example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/common/mode_state/get_robot_mode.rst.txt

This example demonstrates checking the robot's operation mode to perform either a jog motion in manual mode or start a DRL program in automatic mode.

```cpp
string strDrProgram = "\r\n"
                      "loop = 0\r\n"
                      "while loop < 3:\r\n"
                      "    movej(posj(10,10,10,10,10,10), vel=60, acc=60)\r\n"
                      "    movel(posx(00,00,00,00,00,00), vel=60, acc=60)\r\n"
                      "    loop=loop+1\r\n"
                      "end\r\n"
                      "movej(posj(10,10,10,10,10,10), vel=60, acc=60)\r\n";

if (drfl.get_robot_state() == ESTATE_STANDBY) {
    if (drfl.get_robot_mode() == ROBOT_MODE_MANUAL) {
        // Manual mode
        drfl.jog(JOG_AXIS_JOINT_3, MOVE_REFERENCE_BASE, 0.0f);
        sleep(2);
        drfl.jog(JOG_AXIS_JOINT_3, MOVE_REFERENCE_BASE, 0.0f);
    }
    else {
        // Automatic mode
        ROBOT_SYSTEM eTargetSystem = ROBOT_SYSTEM_VIRTUAL;
        drfl.drl_start(eTargetSystem, strDrProgram);
    }
}
```

--------------------------------

### Asynchronous Spline Motion Execution Example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/motion_primitives_advanced/amovesx.rst.txt

This example demonstrates performing an asynchronous spline motion through four TCP waypoints and triggering a digital output 3 seconds after the motion starts.

```cpp
// Execute an asynchronous Cartesian spline motion through multiple waypoints.
// D-Out is triggered 3 seconds after the spline motion starts.

float xpos[4][6];
int xposNum = 4;
float tvel[2] = { 50, 50 };
float tacc[2] = { 100, 100 };

xpos[0][0]=559; xpos[0][1]=434.5; xpos[0][2]=651.5; xpos[0][3]=0; xpos[0][4]=180; xpos[0][5]=0;
xpos[1][0]=559; xpos[1][1]=484.5; xpos[1][2]=251.5; xpos[1][3]=0; xpos[1][4]=180; xpos[1][5]=0;
xpos[2][0]=559; xpos[2][1]=234.5; xpos[2][2]=251.5; xpos[2][3]=0; xpos[2][4]=180; xpos[2][5]=0;
xpos[3][0]=559; xpos[3][1]=134.5; xpos[3][2]=451.5; xpos[3][3]=0; xpos[3][4]=180; xpos[3][5]=0;

drfl.amovesx(xpos, xposNum, tvel, tacc, 0, MOVE_MODE_ABSOLUTE);
Sleep(3000);
drfl.set_digital_output(GPIO_CTRLBOX_DIGITAL_INDEX_1, 1);
```

--------------------------------

### Configure tool digital output type example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/common/io/set_tool_digital_output_type.rst.txt

An example demonstrating how to configure tool digital output port #1 to PNP type using the CDRFLEx class.

```cpp
#include "DRFLEx.h"
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    // Configure tool digital output port #1 to PNP type
    bool result = drfl.set_tool_digital_output_type(1, OUTPUT_TYPE_PNP);

    if (result)
        printf("Tool DO port #1 configured to PNP output type.\n");
    else
        printf("Failed to configure digital output type.\n");
}
```

--------------------------------

### Registering a New Tool Configuration in C++

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/tool_tcp_payload/add_tool.rst.txt

This example demonstrates how to define tool properties, register the tool using add_tool, and activate it with set_tool for Auto Mode operations.

```cpp
#include "DRFLEx.h"
#include <cstdio>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    float cog[3]     = {0.f, 0.f, 40.f};       // in mm relative to flange/TCP
    float inertia[6] = {0.f, 0.f, 0.f, 0.f, 0.f, 0.f};

    // Register a new tool
    if (drfl.add_tool("NEW_END_EFFECTOR", 1.2f, cog, inertia)) {
        printf("Tool registered successfully.\n");
    } else {
        printf("Failed to register tool.\n");
        return -1;
    }

    // Select the new tool for Auto Mode operation
    drfl.set_tool("NEW_END_EFFECTOR");

    return 0;
}
```

--------------------------------

### RT Console Logs

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/tutorials/scenarios/6_realtime_control_sample.rst.txt

Example output showing the start and end positions for alternating loops.

```text
Loop 0) Start position: 0, 0, 0, 0, 0, 0,
Loop 0) End position: 30, 30, 60, -30, -90, 30,
Loop 1) Start position: 30, 30, 60, -30, -90, 30,
Loop 1) End position: 0, 0, 0, 0, 0, 0,
...
```

--------------------------------

### Initialize and Start RT Control

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/rt/create_destroy/create_robot_control_udp.rst.txt

This example demonstrates how the CDRFLEx constructor automatically creates the UDP RT control instance, which is then used to connect to a specific IP and port and start real-time control.

```cpp
#include "DRFLEx.h"
using namespace DRAFramework;

int main() {
    // Constructor automatically creates a UDP RT control instance
    CDRFLEx drfl;

    // The instance can now be used for real-time control operations
    drfl.connect_rt_control("192.168.137.100", 12347);
    drfl.start_rt_control();
}
```

--------------------------------

### set_robot_system usage example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/common/mode_state/set_robot_system.rst.txt

Example demonstrating how to check the current robot system and switch to the real robot system if necessary.

```cpp
ROBOT_SYSTEM eRobotSystem = drfl.get_robot_system();
if (eRobotSystem != ROBOT_SYSTEM_REAL) {
    // Converts to real robot system
    drfl.set_robot_system(ROBOT_SYSTEM_REAL);
}
else {
    // Do something ...
}
```

--------------------------------

### Setup Connection and Variables

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/tutorials/scenarios/3_send_drl_script_sample.rst.txt

Defines the communication protocol version, controller IP address, and state tracking variables required before establishing a connection.

```cpp
#define DRCF_VERSION 2 // Set 2 or 3 according to drcf version.

const std::string IP_ADDRESS = "192.168.137.100"; // real mode
CDRFLEx robot; // Instance for APIs

bool get_control_access = false; // Variable to check control authority
bool is_standby = false;        // Variable to check whether the robot state is standby.
```

--------------------------------

### Registering a real-time monitoring callback

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/rt/diagnostics_callbacks/set_on_rt_monitoring_data.rst.txt

Example demonstrating how to define a callback function and register it using set_on_rt_monitoring_data before starting real-time control.

```cpp
// Define callback function
void OnRTMonitoringData(LPRT_OUTPUT_DATA_LIST data) {
    static int count = 0;
    if (++count % 60 == 0) { // Print every 60 cycles (~0.06s at 1kHz)
        printf("Timestamp: %.3lf\n", data->_time_stamp);
        printf("Actual Joint Position: %.3f %.3f %.3f %.3f %.3f %.3f\n",
               data->_actual_joint_position[0], data->_actual_joint_position[1],
               data->_actual_joint_position[2], data->_actual_joint_position[3],
               data->_actual_joint_position[4], data->_actual_joint_position[5]);
        printf("Actual Motor Torque: %.3f %.3f %.3f %.3f %.3f %.3f\n",
               data->_actual_motor_torque[0], data->_actual_motor_torque[1],
               data->_actual_motor_torque[2], data->_actual_motor_torque[3],
               data->_actual_motor_torque[4], data->_actual_motor_torque[5]);
        printf("----------------------------------------\n");
    }
}

// Main program
int main() {
    CDRFLEx drfl;
    drfl.connect_rt_control("192.168.137.100", 12347);

    string version = "v1.0";
    float period = 0.001f; // 1 ms
    int losscount = 4;

    // Register callback for RT monitoring
    drfl.set_on_rt_monitoring_data(OnRTMonitoringData);

    // Configure real-time input/output channels
    drfl.set_rt_control_input(version, period, losscount);
    drfl.set_rt_control_output(version, period, losscount);

    // Start real-time control
    drfl.start_rt_control();

    while (true) {
        // Application logic or motion control loop
    }

    drfl.disconnect_rt_control();
    return 0;
}
```

--------------------------------

### Terminate active alter motion session

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/common/motion_execution/disable_alter_motion.rst.txt

Example demonstrating how to start a thread for alter motion, enable the mode, and subsequently disable it to restore normal control.

```cpp
#include "DRFLEx.h"
#include <thread>
using namespace DRAFramework;

// Thread routine continuously sending small delta corrections
void ThreadFunc() {
    CDRFLEx drfl;
    float delta[6] = {10.0f, 0, 0, 10.0f, 0, 0};
    while (true) {
        drfl.alter_motion(delta);
        std::this_thread::sleep_for(std::chrono::milliseconds(20));
    }
}

int main() {
    CDRFLEx drfl;

    // 1) Start a separate thread to run alter motion continuously
    std::thread th(ThreadFunc);

    // 2) Enable alter motion mode (prepare fine-tuning control)
    float limitDpos[2] = {50.0f, 90.0f};
    float limitDposPer[2] = {5.0f, 50.0f};
    drfl.enable_alter_motion(5, PATH_MODE_DPOS, COORDINATE_SYSTEM_BASE,
                             limitDpos, limitDposPer);

    // ... Fine-tuning in progress ...

    // 3) Disable alter motion mode to restore normal control
    drfl.disable_alter_motion();

    th.detach(); // clean up background thread
    return 0;
}
```

--------------------------------

### speedl_rt real-time streaming example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/rt/command_control/speedl_rt.rst.txt

A complete example showing how to connect to the robot, configure RT streaming, and send a real-time TCP velocity command.

```cpp
#include "DRFLEx.h"
#include <iostream>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    // Connect and configure RT streaming
    drfl.connect_rt_control("192.168.137.100", 12347);

    std::string version = "v1.0";
    float period = 0.001f; // 1 ms cycle
    int lossCount = 4;

    drfl.set_rt_control_input(version, period, lossCount);
    drfl.set_rt_control_output(version, period, lossCount);
    drfl.start_rt_control();

    // Define velocity and acceleration targets
    float fTargetVel[6] = {150.0f, 0.0f, 100.0f, 0.0f, 0.0f, 0.0f};
    float fTargetAcc[6] = {800.0f, 800.0f, 800.0f, 100.0f, 100.0f, 100.0f};
    float fTargetTime = 0.06f; // 60 ms

    // Send real-time TCP velocity command
    if (drfl.speedl_rt(fTargetVel, fTargetAcc, fTargetTime))
        std::cout << "TCP velocity command successful." << std::endl;
    else
        std::cout << "TCP velocity command failed." << std::endl;

    drfl.stop_rt_control();
    drfl.disconnect_rt_control();
    return 0;
}
```

--------------------------------

### Real-time data reading example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/rt/data_io/read_data_rt.rst.txt

A complete example demonstrating how to connect to RT control, configure streaming, and continuously read joint data in a loop.

```cpp
#include "DRFLEx.h"
#include <iostream>
#include <cstring>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;
    drfl.connect_rt_control("192.168.137.100", 12347);

    std::string version = "v1.0";
    float period = 0.001f;  // 1 msec
    int lossCount = 4;

    // Configure input/output streaming
    drfl.set_rt_control_input(version, period, lossCount);
    drfl.set_rt_control_output(version, period, lossCount);
    drfl.start_rt_control();

    // Real-time reading loop
    while (true) {
        auto data = drfl.read_data_rt();
        if (!data) continue;

        // Read key fields
        float jointPos[6];
        float jointVel[6];
        float jointTorque[6];

        memcpy(jointPos, data->actual_joint_position, sizeof(float) * 6);
        memcpy(jointVel, data->actual_joint_velocity, sizeof(float) * 6);
        memcpy(jointTorque, data->actual_joint_torque, sizeof(float) * 6);

        std::cout << "Joint 1 Pos: " << jointPos[0]
                  << "  Vel: " << jointVel[0]
                  << "  Torque: " << jointTorque[0] << std::endl;

        // Custom condition to break the loop
        if (jointPos[0] > 30.0f)
            break;

        // Sleep for the RT period
        std::this_thread::sleep_for(std::chrono::milliseconds(1));
    }

    drfl.stop_rt_control();
    drfl.disconnect_rt_control();
    return 0;
}
```

--------------------------------

### Checking Active TCP Before Starting a Task

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/tool_tcp_payload/get_tcp.rst.txt

This example demonstrates how to retrieve the active TCP using get_tcp and validate it against an expected value to prevent incorrect automated behavior.

```cpp
#include "DRFLEx.h"
#include <cstdio>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    // Query currently active TCP
    std::string activeTcp = drfl.get_tcp();
    printf("Active TCP: %s\n", activeTcp.c_str());

    // Validate expected TCP for the upcoming recipe
    if (activeTcp != "TCP_GRIPPER_CENTER") {
        printf("Warning: Unexpected TCP is active.\n");
    }

    return 0;
}
```

--------------------------------

### Starting a Simple DRL Loop in Auto Mode

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/drl_program_control/drl_start.rst.txt

This example demonstrates how to define a DRL program as a string and execute it using drl_start after verifying the robot is in Auto Mode and the standby state.

```cpp
#include "DRFLEx.h"
#include <iostream>
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    // 1) Connect & initialize (omitted here – handled in common setup code)
    //    e.g., drfl.open_connection("192.168.137.100");
    //          drfl.set_robot_system(ROBOT_SYSTEM_REAL);

    // 2) Define a simple DRL program as a string
    //    - Repeats a back-and-forth joint motion three times.
    std::string drlProgram =
        "loop = 0\r\n"
        "while loop < 3:\r\n"
        "    movej(posj(10,10,10,10,10,10), vel=60, acc=60)\r\n"
        "    movej(posj(0,0,0,0,0,0), vel=60, acc=60)\r\n"
        "    loop = loop + 1\r\n"
        "end\r\n";

    // 3) Ensure robot is in Auto Mode and ready
    if (drfl.get_robot_mode() == ROBOT_MODE_AUTONOMOUS &&
        drfl.get_robot_state() == eSTATE_STANDBY) {

        // Choose target robot system:
        // - ROBOT_SYSTEM_REAL    : real robot (field)
        // - ROBOT_SYSTEM_VIRTUAL : virtual system (simulation/test)
        ROBOT_SYSTEM targetSystem = ROBOT_SYSTEM_REAL;

        if (!drfl.drl_start(targetSystem, drlProgram)) {
            std::cerr << "Failed to start DRL program." << std::endl;
            return -1;
        }

        std::cout << "DRL program started in Auto Mode." << std::endl;
    } else {
        std::cerr << "Robot is not in Auto/Standby state. Cannot start DRL." << std::endl;
    }

    return 0;
}
```

--------------------------------

### Configuring analog output modes example

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/common/io/set_mode_analog_output.rst.txt

Example demonstrating how to set analog output #1 to current mode and analog output #2 to voltage mode.

```cpp
#include "DRFLEx.h"
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    // Set analog output #1 to current mode (4–20 mA)
    drfl.set_mode_analog_output(GPIO_CTRLBOX_ANALOG_INDEX_1, GPIO_ANALOG_TYPE_CURRENT);

    // Set analog output #2 to voltage mode (0–10 V)
    drfl.set_mode_analog_output(GPIO_CTRLBOX_ANALOG_INDEX_2, GPIO_ANALOG_TYPE_VOLTAGE);
}
```

--------------------------------

### Registering and managing a tool

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/common/tool/add_tool.rst.txt

Example demonstrating how to register a tool with specific physical properties, set it as the active tool, and subsequently remove the registration.

```cpp
#include "DRFLEx.h"
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    float fCog[3]     = {10.f, 10.f, 10.f};
    float fInertia[6] = {0.f, 0.f, 0.f, 0.f, 0.f, 0.f};

    // (1) Register a new tool
    bool success = drfl.add_tool("tool#1", 5.3f, fCog, fInertia);

    // (2) Set it as the active tool
    if (success)
        drfl.set_tool("tool#1");

    // (3) Remove the tool registration
    drfl.del_tool("tool#1");
}
```

--------------------------------

### Resuming Motion After a Conditional Pause

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/_sources/mode/auto/motion_control_utilities/move_resume.rst.txt

This example demonstrates using move_resume() to continue a trajectory after a pause triggered by real-time joint position feedback. It includes starting an asynchronous motion, monitoring joint 3, pausing the motion, and finally resuming it.

```cpp
#include "DRFLEx.h"
using namespace DRAFramework;

int main() {
    CDRFLEx drfl;

    float target[6] = {0, 0, 90, 0, 90, 0};

    // 1) Start asynchronous motion
    drfl.amovej(target, 20, 40);

    // 2) Pause when joint 3 reaches threshold
    while (true) {
        LPPOSITION pos = drfl.get_current_pose(ROBOT_POSE_JOINT);
        if (!pos) continue;

        if (pos->_fTargetPos[2] >= 45) {
            drfl.move_pause();
            printf("Motion paused at J3 >= 45 degrees.\n");
            Sleep(3000);  // Wait three seconds
            break;
        }
    }

    // 3) Resume the paused motion
    if (!drfl.move_resume()) {
        printf("Failed to resume motion.\n");
        return -1;
    }

    printf("Motion resumed.\n");
    return 0;
}
```

--------------------------------

### Control Authority and Servo ON Output

Source: https://doosanrobotics.github.io/doosan-robotics-api-manual/GL013302/tutorials/scenarios/4_minimal_welding_sample.html

Example output showing the system and library versions after successful initialization.

```text
System version: GF03050000
Library version: GL013300
```
Tokens:
Raw