### Handle parameter initialization Source: https://github.com/stmicroelectronics/ism330dhcx-pid/blob/master/README.md Initialization of the handle parameter if needed by the platform read and write functions. ```c dev_ctx.handle = &platform_handle; ``` -------------------------------- ### Clone repository Source: https://github.com/stmicroelectronics/ism330dhcx-pid/blob/master/README.md Command to clone the complete content of the repository folder. ```bash git clone https://github.com/STMicroelectronics/ISM330DHCX-PID/ ``` -------------------------------- ### Device interface structure initialization Source: https://github.com/stmicroelectronics/ism330dhcx-pid/blob/master/README.md Declaration and initialization of the structure of the device interface. ```c xxxxxxx_ctx_t dev_ctx; /** xxxxxxx is the used part number **/ dev_ctx.write_reg = platform_write; dev_ctx.read_reg = platform_read; dev_ctx.mdelay = platform_delay; ``` -------------------------------- ### Platform specific read/write functions Source: https://github.com/stmicroelectronics/ism330dhcx-pid/blob/master/README.md User-defined functions for read and write transactions from the sensor hardware bus. ```c /** Please note that is MANDATORY: return 0 -> no Error.**/ int32_t platform_write(void *handle, uint8_t reg, const uint8_t *bufp, uint16_t len) int32_t platform_read(void *handle, uint8_t reg, uint8_t *bufp, uint16_t len) /** Optional (may be required by driver) **/ void platform_delay(uint32_t millisec) ``` === COMPLETE CONTENT === This response contains all available snippets from this library. No additional content exists. Do not make further requests.