### Interactive Program Notice (GPL)

Source: https://github.com/p/stm32flash/code/blob/master/gpl-2.0.txt

Example of a short notice to display when an interactive program starts. It informs users about the program's warranty status and redistribution conditions.

```text
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
```

--------------------------------

### Applying GPL to New Programs

Source: https://github.com/p/stm32flash/code/blob/master/gpl-2.0.txt

Standard notices to include at the start of each source file when distributing a program under the GPL. This ensures the exclusion of warranty and provides necessary copyright information.

```text
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year>  <name of author>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
```

--------------------------------

### Copyright Disclaimer Example

Source: https://github.com/p/stm32flash/code/blob/master/gpl-2.0.txt

A sample copyright disclaimer for a company to sign, disclaiming interest in a program written by an individual.

```text
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.

<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
```

--------------------------------

### Load I2C Device Driver and Set Permissions

Source: https://github.com/p/stm32flash/code/blob/master/I2C.txt

After recompiling the kernel with modified I2C driver settings, load the i2c-dev module and set the necessary permissions for the I2C device.

```bash
$> modprobe i2c-dev
> chmod 666 /dev/i2c-7
```

--------------------------------

### Detect I2C Controller Support

Source: https://github.com/p/stm32flash/code/blob/master/I2C.txt

Use this command to check if your I2C controller supports the I2C protocol. Replace 'n' with the I2C interface number.

```bash
i2cdetect -F n
```

--------------------------------

### Flash STM32 via I2C with Modified Kernel Settings

Source: https://github.com/p/stm32flash/code/blob/master/I2C.txt

This command uses stm32flash to communicate with an STM32 device over I2C, assuming the I2C driver has been modified and permissions set correctly. The '-a 0x39' specifies the I2C address.

```bash
#> stm32flash -a 0x39 /dev/i2c-7
```

--------------------------------

### Modify I2C Clock Stretching Timeout in Linux Kernel

Source: https://github.com/p/stm32flash/code/blob/master/I2C.txt

This snippet shows how to modify the I2C clock stretching timeout in the Linux kernel driver for a specific laptop's VGA port I2C controller. This is a workaround for bootloader v1.0 issues with long operations.

```c
i2c->bit.timeout = usecs_to_jiffies(2200);      /* from VESA */
+ i2c->bit.timeout = msecs_to_jiffies(5000);      /* 5s for STM32 */
```

=== COMPLETE CONTENT === This response contains all available snippets from this library. No additional content exists. Do not make further requests.