### Optimize Gaming Experience with Parsec over Remote Desktop

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

This guide explains why Remote Desktop is not suitable for gaming due to high input lag and recommends using Parsec instead. It provides a workflow for using Remote Desktop for setup and Parsec for actual gameplay, along with Parsec optimization settings for bandwidth, resolution, and FPS.

```bash
# So sánh độ trễ:
# Remote Desktop: ~100-200ms input lag (không phù hợp gaming)
# Parsec: ~10-30ms input lag (tối ưu cho gaming)

# Workflow đúng cho gaming trên EzyCloudX:

# 1. Sử dụng Remote Desktop CHỈ để cài đặt/cấu hình
mstsc /v:your-server-ip /u:ezycloudx-admin

# 2. Cài đặt game, cấu hình settings
# 3. Đóng Remote Desktop

# 4. Sử dụng Parsec để chơi game
start "" "C:\Program Files\Parsec\parsecd.exe"

# 5. Tối ưu Parsec cho gaming:
# Settings > Host > Bandwidth Limit > 50 Mbps
# Settings > Host > Resolution > Match client
# Settings > Host > FPS > 60 hoặc higher
```

--------------------------------

### Docker and GPU Usage on EzyCloudX

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

This section introduces Docker on EzyCloudX for running AI, graphics, and heavy computation applications in containerized environments, with support for GPU passthrough. It includes commands to check Docker installation, verify GPU availability, run containers with GPU support, and monitor GPU utilization.

```bash
# Kiểm tra Docker đã cài đặt:
docker --version

# Kiểm tra GPU khả dụng:
nvidia-smi

# Chạy container với GPU support:
docker run --gpus all nvidia/cuda:11.0-base nvidia-smi

# Ví dụ chạy Stable Diffusion:
docker run --gpus all -p 7860:7860 \
  -v /path/to/models:/models \
  automatic1111/stable-diffusion-webui

# Ví dụ chạy LLM inference:
docker run --gpus all -p 8000:8000 \
  vllm/vllm-openai \
  --model meta-llama/Llama-2-7b-chat-hf

# Kiểm tra GPU utilization:
watch -n 1 nvidia-smi
```

--------------------------------

### Configure Bluestacks (Android Emulator) on EzyCloudX

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

This guide explains how to configure Bluestacks on EzyCloudX, emphasizing the need to disable Hyper-V due to compatibility issues. It provides commands to check Hyper-V status, disable it, and restart the system. It also includes recommended performance settings for Bluestacks.

```bash
# Kiểm tra Hyper-V status:
systeminfo | findstr "Hyper-V"

# Tắt Hyper-V (yêu cầu quyền Admin):
bcdedit /set hypervisorlaunchtype off

# Hoặc qua PowerShell:
Disable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V-All

# Restart máy để áp dụng:
shutdown /r /t 0

# Sau khi restart, cài đặt Bluestacks:
# Download từ: https://www.bluestacks.com/download.html

# Cấu hình Bluestacks cho hiệu năng:
# Settings > Performance > CPU: 4 cores
# Settings > Performance > RAM: 4GB
# Settings > Graphics > Graphics mode: Performance
# Settings > Graphics > GPU: Dedicated GPU
```

--------------------------------

### Switch to 5GHz WiFi for Better Performance

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

This guide recommends switching to a 5GHz WiFi network over 2.4GHz to improve connection stability and speed, especially for cloud gaming. It includes a command to check if the WiFi adapter supports 5GHz bands (802.11a, 802.11n, 802.11ac).

```bash
# Kiểm tra WiFi adapter hỗ trợ 5GHz:
netsh wlan show drivers | findstr "Radio types supported"
# Kết quả cần có: 802.11a 802.11n 802.11ac
```

--------------------------------

### Pair SteamLink on Mobile via Remote Desktop

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

This guide outlines the steps to pair SteamLink on a mobile device when encountering pairing issues. It involves ensuring the SteamLink app is active, connecting via Remote Desktop, enabling Big Picture Mode, and configuring Remote Play settings. It also includes steps for checking network connectivity and opening necessary ports.

```bash
# Quy trình bắt cặp SteamLink:

# 1. Đảm bảo SteamLink app trên điện thoại đang mở
# Mở app SteamLink > Giữ app chạy foreground

# 2. Kết nối vào máy qua Remote Desktop
mstsc /v:your-server-ip

# 3. Trên máy host, mở Steam Big Picture Mode
# Steam > View > Big Picture Mode
# Hoặc nhấn phím Xbox trên controller

# 4. Vào Settings > Remote Play > Pair Steam Link
# Nhập mã PIN hiển thị trên điện thoại

# 5. Kiểm tra cùng mạng:
# Máy host:
ipconfig | findstr "IPv4"
# Điện thoại: Kiểm tra IP trong cùng subnet

# 6. Mở port cho Steam Remote Play:
netsh advfirewall firewall add rule name="Steam Remote Play" dir=in action=allow protocol=UDP localport=27031-27036
netsh advfirewall firewall add rule name="Steam Remote Play TCP" dir=in action=allow protocol=TCP localport=27036-27037
```

--------------------------------

### Configure Parsec Microphone Passthrough

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

Enables microphone passthrough by modifying the Parsec configuration file directly via command line.

```bash
echo client_enable_mic=1 >> "%APPDATA%\Parsec\config.txt"
```

--------------------------------

### Optimize Steam Download Speed

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

Checks network performance using speedtest-cli to diagnose slow download speeds and provides guidance on clearing Steam cache.

```bash
speedtest-cli --simple
```

--------------------------------

### Check and Request Bandwidth Increase from ISP

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

This section addresses situations where actual internet speed is lower than the subscribed plan (e.g., 30Mbps on a 150K plan). It provides commands to test current speeds, outlines expected speeds, and suggests contacting the Internet Service Provider (ISP) with specific information to resolve bandwidth issues.

```bash
# Kiểm tra tốc độ hiện tại:
speedtest-cli --simple

# Kết quả mong đợi với gói 150K:
# Download: ~100 Mbps
# Upload: ~50 Mbps

# Nếu chỉ đạt ~30Mbps, liên hệ tổng đài:
# VNPT: 1800 1166 (Phím 3)
# Viettel: 1800 8119 (Phím 1)
# FPT: App HiFPT

# Nội dung yêu cầu:
# "Mình đăng ký gói [tên gói] nhưng tốc độ chỉ đạt 30Mbps.
#  Nhờ kỹ thuật reset đường truyền và mở đúng băng thông gói cước."

# Sau khi ISP xử lý, test lại:
speedtest-cli --simple
ping google.com -n 10
```

--------------------------------

### Resolve Parsec Error 401

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

Addresses authentication failures caused by incorrect credentials or input method conflicts by clearing local cache files.

```bash
del /q "%APPDATA%\Parsec\*.json"
```

--------------------------------

### Configure Remote Desktop Login with Specific Username

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

This section details how to connect to Remote Desktop using a specific username, 'ezycloudx-admin', which is often required instead of the default machine username. It includes methods for direct connection, creating an RDP file, saving credentials, and troubleshooting by deleting old credentials.

```bash
# Kết nối Remote Desktop với username đúng:
mstsc /v:your-server-ip /u:ezycloudx-admin

# Hoặc tạo file RDP với cấu hình sẵn:
echo full address:s:your-server-ip > ezycloudx.rdp
echo username:s:ezycloudx-admin >> ezycloudx.rdp
echo prompt for credentials:i:1 >> ezycloudx.rdp

# Lưu credentials (tuỳ chọn):
cmdkey /add:your-server-ip /user:ezycloudx-admin /pass:your-password

# Kiểm tra kết nối:
mstsc ezycloudx.rdp

# Xóa credentials cũ nếu bị lỗi:
cmdkey /delete:your-server-ip
```

--------------------------------

### Resolve Parsec Error 403

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

Handles login location verification errors by pinging the server and restarting the client to refresh authentication status.

```bash
ping parsec.app
taskkill /IM parsecd.exe /F
timeout /t 3
start "" "C:\Program Files\Parsec\parsecd.exe"
```

--------------------------------

### Resolve Parsec Error 6023

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

Troubleshoots P2P connection issues by verifying port listening status and adding Windows Firewall rules to allow Parsec traffic.

```bash
netstat -an | findstr "LISTENING"
netsh advfirewall firewall show rule name=all | findstr "Parsec"
netsh advfirewall firewall add rule name="Parsec" dir=in action=allow program="C:\Program Files\Parsec\parsecd.exe" enable=yes
```

--------------------------------

### Set Steam Process Priority to High

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

This command sets the process priority of Steam to 'high priority' on Windows. This can potentially improve Steam's performance by giving it more CPU resources.

```batch
wmic process where name="steam.exe" CALL setpriority "high priority"
```

--------------------------------

### Resolve Parsec Secondary Display Issues

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

Fixes issues where secondary displays are not detected by terminating conflicting remote desktop processes and checking video controller status.

```bash
taskkill /IM mstsc.exe /F 2>nul
wmic path win32_videocontroller get name,status
start "" "C:\Program Files\Parsec\parsecd.exe"
```

--------------------------------

### Resolve Parsec Error 14003

Source: https://context7.com/boynytd/ezycloudx_kb_v7.md/llms.txt

Resolves conflict errors caused by active Remote Desktop or Windows App sessions. It terminates conflicting processes and restarts the Parsec client.

```bash
tasklist | findstr "mstsc"
taskkill /IM mstsc.exe /F
tasklist | findstr "WindowsApp"
start "" "C:\Program Files\Parsec\parsecd.exe"
```

=== COMPLETE CONTENT === This response contains all available snippets from this library. No additional content exists. Do not make further requests.