### Example ppb calculation Source: https://github.com/airspy/airspyone_host/wiki/Home Example calculation showing how to compute ppb from actual and observed frequencies. ```text ((1544.500-1544.503)/1544.500)*1e9 = -1942 ppb ``` -------------------------------- ### Linux/OSX: Run airspy_rx performance test Source: https://github.com/airspy/airspyone_host/wiki/Troubleshooting Run this command in a shell to test USB/CPU performance. Leave it running for 30 seconds, then press Ctrl+C. If average throughput is below 10.0 MSPS, there may be USB or CPU issues. ```bash airspy_rx -r /dev/null -t 0 ``` -------------------------------- ### Windows: Run airspy_rx performance test Source: https://github.com/airspy/airspyone_host/wiki/Troubleshooting Run this command in a Windows console to test USB/CPU performance. Leave it running for 30 seconds, then press Ctrl+C. If average throughput is below 10.0 MSPS, there may be USB or CPU issues. ```bash airspy_rx -r NUL -t 0 ``` -------------------------------- ### airspy_calibrate help output Source: https://github.com/airspy/airspyone_host/wiki/Home Shows the usage options for the airspy_calibrate tool: -r to read and display calibration data, and -w to erase and write calibration in ppb. ```text Specify either read or write option. Usage: -r: Read and display calibration data. -w : Erase and Write calibration in ppb. ``` -------------------------------- ### Clone AirSpy host repository Source: https://github.com/airspy/airspyone_host/blob/master/README.md Clones the airspyone_host repository into a local directory named 'host'. This is the first step in building the host software on Windows. ```bash git clone https://github.com/airspy/airspyone_host.git host ``` -------------------------------- ### airspy_calibrate commands Source: https://github.com/airspy/airspyone_host/wiki/Home Commands to erase calibration and apply a new ppb value. ```bash airspy_calibrate -w 0 ``` ```bash airspy_calibrate -w -1942 ``` -------------------------------- ### Frequency correction to ppb algorithm Source: https://github.com/airspy/airspyone_host/wiki/Home Formula to convert frequency error in MHz to parts per billion (ppb). ```text ppb = ((actual_freq_MHz - observed_freq_MHz) / actual_freq_MHz) * 1e9 ``` -------------------------------- ### Check external clock state with airspy_si5351c Source: https://github.com/airspy/airspyone_host/wiki/Troubleshooting Run this command on a powered AirSpy to query the Si5351 CLKIN loss-of-signal register. Bit 4 of the returned value indicates the active clock source: if set, the TCXO is active; if clear, the external clock input is active. Interpret the result as two nibbles: the first (bits 7-4) and second (bits 3-0). ```shell airspy_si5351c -n 0 -r ``` -------------------------------- ### Ubuntu 15.x+: Blacklist airspy kernel driver Source: https://github.com/airspy/airspyone_host/wiki/Troubleshooting Blacklists the airspy kernel module to avoid conflicts with airspy tools. Run with sudo. This is needed for kernel >= 3.17 until official support is added. ```bash echo blacklist airspy |sudo tee /etc/modprobe.d/airspy-blacklist.conf ; sudo rmmod airspy ``` === COMPLETE CONTENT === This response contains all available snippets from this library. No additional content exists. Do not make further requests.